Igor Yurievich Aleksanyan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Igor Yurievich Aleksanyan has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Albert Hamed-Harisovich Nugmanov
Astrakhan State Technical University
21 shared publications И. Ю. Алексанян
Федеральное государственное бюджетное образовательное учреждение высшего образования «Астраханский государственный технический университет
9 shared publications- Pavel Dmitrievich Osmolovskiy
Russian State Agrarian University - Moscow Timiryazev Agricultural Academy
7 shared publications - Zarema Mikhailovna Arabova
Vernadsky Institute of Geochemistry and Analytical Chemistry o f the Russian Academy of Sciences
7 shared publications Astrakhan State Technical University
3 shared publications- Ekaterina Vladimirovna Sokolova
Astrakhan State Technical University
3 shared publications
Latest Publications
- Open Access
- 13 October 2026
- Published by Maikop State Technological University in New Technologies
- Vol. 22 (3) , 28-39
Combined deodorization of dry protein products from secondary fish raw materials
Introduction. The fish processing industry annually produces a significant amount of secondary raw materials – caviar and roe complex, liver, and other organs of ordinary fish species. This raw material is a promising source for obtaining valuable food ingredients, including fractionated lecithin and isolated protein products. However, their widespread use is limited by the presence of a persistent fishy odor, which significantly reduces the organoleptic properties and consumer appeal of the final product. The goal of the research was to investigate the mechanisms of formation of volatile compounds responsible for the undesirable odor in dried catfish liver and raffinate after the extraction of lecithin-containing substances from fish roe, as well as to develop an effective and cost-effective deodorization method. The objects and methods of the research were dried catfish liver and raffinate after lecithin extraction. The paper provides a comparative analysis of physicochemical deodorization methods, including treatment with organic acids and natural antioxidants. Volatile compound concentrations were determined using gas chromatographymass spectrometry. The results and discussion. The research confirmed that the main sources of undesirable odors were three groups of volatile compounds: nitrogenous (trimethylamine, ammonia), carbonyl (hexanal, nonanal), and sulfur-containing (dimethyl sulfide, methyl mercaptan). A comparative analysis substantiated the effectiveness of combined treatment with organic acids and natural antioxidants. Experiments confirmed that a combination of 1% citric acid and 0.3% rosemary extract reduced trimethylamine content by 70%, hexanal by 45%, and improved organoleptic properties by 3 points. Conclusion. The proposed method is technologically feasible, does not require significant capital investment, and can be recommended for the implementation in the food industry. It opens up prospects for expanding the use of secondary protein products in the production of food ingredients with improved organoleptic properties.
- 13 October 2026
- Published by Maikop State Technological University in New Technologies
- Vol. 22 (3) , 28-39
Open AccessCombined deodorization of dry protein products from secondary fish raw materials
Introduction. The fish processing industry annually produces a significant amount of secondary raw materials – caviar and roe complex, liver, and other organs of ordinary fish species. This raw material is a promising source for obtaining valuable food ingredients, including fractionated lecithin and isolated protein products. However, their widespread use is limited by the presence of a persistent fishy odor, which significantly reduces the organoleptic properties and consumer appeal of the final product. The goal of the research was to investigate the mechanisms of formation of volatile compounds responsible for the undesirable odor in dried catfish liver and raffinate after the extraction of lecithin-containing substances from fish roe, as well as to develop an effective and cost-effective deodorization method. The objects and methods of the research were dried catfish liver and raffinate after lecithin extraction. The paper provides a comparative analysis of physicochemical deodorization methods, including treatment with organic acids and natural antioxidants. Volatile compound concentrations were determined using gas chromatographymass spectrometry. The results and discussion. The research confirmed that the main sources of undesirable odors were three groups of volatile compounds: nitrogenous (trimethylamine, ammonia), carbonyl (hexanal, nonanal), and sulfur-containing (dimethyl sulfide, methyl mercaptan). A comparative analysis substantiated the effectiveness of combined treatment with organic acids and natural antioxidants. Experiments confirmed that a combination of 1% citric acid and 0.3% rosemary extract reduced trimethylamine content by 70%, hexanal by 45%, and improved organoleptic properties by 3 points. Conclusion. The proposed method is technologically feasible, does not require significant capital investment, and can be recommended for the implementation in the food industry. It opens up prospects for expanding the use of secondary protein products in the production of food ingredients with improved organoleptic properties.
- Open Access
- 30 June 2026
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 88 (2) , 267-274
Optical and thermoradiation characteristics of tomato paste foam layer with the addition of ichthyogelatin solution
Tomato paste is a highly concentrated tomato processing product, widely used in the food industry as a semi-finished product for the production of sauces, ketchups, canned goods, and a wide range of other food products. A promising area for improving tomato paste drying technology is foam drying using infrared (radiation) energy supply, which allows for intensifying the moisture removal process and preserving the quality of the finished product. A solution of ichthyogelatin, a biopolymer obtained from fish processing waste, has been proposed as a foaming agent and foam stabilizer. Rational implementation of convective-radiation foam drying requires a comprehensive study of the optical and thermoradiation properties of the dehydrated material. This paper presents the results of a study of the optical and thermoradiation characteristics of a foam layer of tomato paste with the addition of a solution of ichthyogelatin as a foaming agent and stabilizer. The absorption of infrared thermal energy by an optically thin product layer (h ≤ 0.004 m thick) in the humidity range of 0.10 ≤ w ≤ 0.78 kg/kg was examined when irradiated with various radiation generators: a quartz halogen tube, a nichrome coil, a metal plate, a gas infrared radiation plate, and a tubular electric heater. The experimental and analytical studies were performed using a Varian Cary 5000 UV-Vis-NIR spectrophotometer with a DRA-2500 integrating sphere attachment in the spectral range of 800 ≤ λ ≤ 2500 nm. The dependences W=f(x,w), W/m³ of the distribution of the volumetric density of absorbed radiant energy by the depth of an optically thin foam layer with a volumetric (two-sided) supply of heat flow to the product with a total density of E=1680 W/m² were obtained. Based on the analysis of the obtained dependences, as well as a comparison of the emission characteristics of the radiation generators and the spectral transmittance of the foam layer, the feasibility of using quartz halogen tubes at 220V was confirmed to ensure the most uniform distribution of absorbed energy across the layer depth throughout the moisture removal process. The obtained dependences are applicable for subsequent modeling of transient temperature fields in the product during the foam drying process of tomato paste with convective-radiative energy supply
- 30 June 2026
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 88 (2) , 267-274
Open AccessOptical and thermoradiation characteristics of tomato paste foam layer with the addition of ichthyogelatin solution
Tomato paste is a highly concentrated tomato processing product, widely used in the food industry as a semi-finished product for the production of sauces, ketchups, canned goods, and a wide range of other food products. A promising area for improving tomato paste drying technology is foam drying using infrared (radiation) energy supply, which allows for intensifying the moisture removal process and preserving the quality of the finished product. A solution of ichthyogelatin, a biopolymer obtained from fish processing waste, has been proposed as a foaming agent and foam stabilizer. Rational implementation of convective-radiation foam drying requires a comprehensive study of the optical and thermoradiation properties of the dehydrated material. This paper presents the results of a study of the optical and thermoradiation characteristics of a foam layer of tomato paste with the addition of a solution of ichthyogelatin as a foaming agent and stabilizer. The absorption of infrared thermal energy by an optically thin product layer (h ≤ 0.004 m thick) in the humidity range of 0.10 ≤ w ≤ 0.78 kg/kg was examined when irradiated with various radiation generators: a quartz halogen tube, a nichrome coil, a metal plate, a gas infrared radiation plate, and a tubular electric heater. The experimental and analytical studies were performed using a Varian Cary 5000 UV-Vis-NIR spectrophotometer with a DRA-2500 integrating sphere attachment in the spectral range of 800 ≤ λ ≤ 2500 nm. The dependences W=f(x,w), W/m³ of the distribution of the volumetric density of absorbed radiant energy by the depth of an optically thin foam layer with a volumetric (two-sided) supply of heat flow to the product with a total density of E=1680 W/m² were obtained. Based on the analysis of the obtained dependences, as well as a comparison of the emission characteristics of the radiation generators and the spectral transmittance of the foam layer, the feasibility of using quartz halogen tubes at 220V was confirmed to ensure the most uniform distribution of absorbed energy across the layer depth throughout the moisture removal process. The obtained dependences are applicable for subsequent modeling of transient temperature fields in the product during the foam drying process of tomato paste with convective-radiative energy supply
- Open Access
- 30 June 2026
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 88 (2) , 148-156
Experimental study of the dielectric properties of catfish liver as an object of microwave drying
Fish by-products are a potential source of valuable substances with important functional properties. Improving the value of fish by-products is currently essential for producing clean and waste-free products in the fish processing industry. Fish liver, as a secondary raw material, contains a complex of low-molecular compounds and enzymes, which serve as the basis for expensive and scarce biologically active premixes and highly purified substances. The liver of the common catfish was studied, with both raw and dried liver exposed to microwave radiation. Experimental studies to determine the permittivity and its imaginary part through the dissipation tangent for samples of the original raw liver with a moisture content of 68% and the final dried product with a moisture content of 5% were conducted using the resonator perturbation method at a frequency of 2.45 GHz in the temperature range from 60°C to 100°C. For the liver studied, permittivity and conductivity significantly depended on moisture content, microwave frequency, temperature, density, and thickness of the catfish liver layer, which varied during dehydration. Graphical patterns were obtained for the variation of permittivity and its imaginary part depending on the moisture content and temperature of the catfish liver. It was determined that with increasing moisture content of the by-product, at all temperatures, the permittivity also increases. Dielectric loss also increases with increasing moisture content across its entire range. Mathematical dependencies of the imaginary part of permittivity on moisture content were obtained in the range from 0.05 to 0.68 kg/kg, respectively, for temperatures ranging from 60°C to 100°C. Growing interest in processing fish raw materials using microwave technologies necessitates further research into the dielectric properties of various food products.
- 30 June 2026
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 88 (2) , 148-156
Open AccessExperimental study of the dielectric properties of catfish liver as an object of microwave drying
Fish by-products are a potential source of valuable substances with important functional properties. Improving the value of fish by-products is currently essential for producing clean and waste-free products in the fish processing industry. Fish liver, as a secondary raw material, contains a complex of low-molecular compounds and enzymes, which serve as the basis for expensive and scarce biologically active premixes and highly purified substances. The liver of the common catfish was studied, with both raw and dried liver exposed to microwave radiation. Experimental studies to determine the permittivity and its imaginary part through the dissipation tangent for samples of the original raw liver with a moisture content of 68% and the final dried product with a moisture content of 5% were conducted using the resonator perturbation method at a frequency of 2.45 GHz in the temperature range from 60°C to 100°C. For the liver studied, permittivity and conductivity significantly depended on moisture content, microwave frequency, temperature, density, and thickness of the catfish liver layer, which varied during dehydration. Graphical patterns were obtained for the variation of permittivity and its imaginary part depending on the moisture content and temperature of the catfish liver. It was determined that with increasing moisture content of the by-product, at all temperatures, the permittivity also increases. Dielectric loss also increases with increasing moisture content across its entire range. Mathematical dependencies of the imaginary part of permittivity on moisture content were obtained in the range from 0.05 to 0.68 kg/kg, respectively, for temperatures ranging from 60°C to 100°C. Growing interest in processing fish raw materials using microwave technologies necessitates further research into the dielectric properties of various food products.
- Open Access
- 27 February 2026
- Published by Krasnoyarsk State Agrarian University in Bulletin of KSAU
- No. 2,p. 199-214
THERMODYNAMIC ANALYSIS OF STATIC REGULARITIES OF LIQUID-SOLID-PHASE EXTRACTION OF THERMOLABILE COMPONENTS FROM PLANT RAW MATERIALS
The aim of the study is to conduct a thermodynamic analysis of the static patterns of the liquid-solid-phase extraction of heat-labile components using the example of obtaining extracts from Jerusalem artichoke and licorice root. Objectives: to experimentally identify the static patterns of the liquid-solid-phase extraction process of the study objects; to conduct a thermodynamic analysis of the static patterns of the liquid-solid-phase extraction process; to determine the extraction static parameters, such as the energy components of the Gibbs free energy; to evaluate the thermal effect of the liquid-solid-phase extraction process of the study objects. The objects of the study are Jerusalem artichoke, licorice root, and aqueous extracts of inulin and glycyrrhizic acid. In this study, this analysis is carried out based on the equations of thermodynamics. The results of calculating the distribution constants of the target components between the extractant and the solid phase are presented, and the extraction static parameters, such as the energy components of the Gibbs free energy, are determined. Taking into account the total heat expended during component transfer from phase to phase, the heat balance equation, for example, determines the temperature change during extraction, taking into account the heat capacity of the extract. It should be noted that the thermal effect can increase with changes in the extract's hydromodulus and concentration, as well as the type of extractant, the nature of the raw material, and the component being transferred. The obtained results allow us to take into account the exothermic or endothermic effect for each type of raw material and transferred component during the extraction process, while maintaining temperature constraints. They can also be used to determine the energy intensity of the extraction process and model the operation. Energy during extraction is spent not only on the dissolution of the extracted component itself but also on overcoming its structural (entropic) or adsorption bond with the raw material or raffinate. This can be achieved through physical effects, in particular, additional energy from heating the hydromodule or extractant or through ultrasonic cavitation.
- 27 February 2026
- Published by Krasnoyarsk State Agrarian University in Bulletin of KSAU
- No. 2,p. 199-214
Open AccessTHERMODYNAMIC ANALYSIS OF STATIC REGULARITIES OF LIQUID-SOLID-PHASE EXTRACTION OF THERMOLABILE COMPONENTS FROM PLANT RAW MATERIALS
The aim of the study is to conduct a thermodynamic analysis of the static patterns of the liquid-solid-phase extraction of heat-labile components using the example of obtaining extracts from Jerusalem artichoke and licorice root. Objectives: to experimentally identify the static patterns of the liquid-solid-phase extraction process of the study objects; to conduct a thermodynamic analysis of the static patterns of the liquid-solid-phase extraction process; to determine the extraction static parameters, such as the energy components of the Gibbs free energy; to evaluate the thermal effect of the liquid-solid-phase extraction process of the study objects. The objects of the study are Jerusalem artichoke, licorice root, and aqueous extracts of inulin and glycyrrhizic acid. In this study, this analysis is carried out based on the equations of thermodynamics. The results of calculating the distribution constants of the target components between the extractant and the solid phase are presented, and the extraction static parameters, such as the energy components of the Gibbs free energy, are determined. Taking into account the total heat expended during component transfer from phase to phase, the heat balance equation, for example, determines the temperature change during extraction, taking into account the heat capacity of the extract. It should be noted that the thermal effect can increase with changes in the extract's hydromodulus and concentration, as well as the type of extractant, the nature of the raw material, and the component being transferred. The obtained results allow us to take into account the exothermic or endothermic effect for each type of raw material and transferred component during the extraction process, while maintaining temperature constraints. They can also be used to determine the energy intensity of the extraction process and model the operation. Energy during extraction is spent not only on the dissolution of the extracted component itself but also on overcoming its structural (entropic) or adsorption bond with the raw material or raffinate. This can be achieved through physical effects, in particular, additional energy from heating the hydromodule or extractant or through ultrasonic cavitation.
- Open Access
- 17 December 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (3) , 191-197
Study of the effect of the regime parameters of mechanical foaming of keratin hydrolysate with a thickener in foam concrete technology
The modern concept of building new-generation residential buildings, focused on energy efficiency, environmental safety, economic feasibility and flexibility of planning solutions, creates a steady demand for lightweight, durable and durable thermal insulation materials. In this context, foam concrete is of considerable interest, and its key component is highly effective foaming agents. The development of protein foaming agents based on hydrolysates of keratin–containing raw materials, in particular, poultry processing waste - peropukhovy raw materials, which makes it possible to solve the problem of recycling secondary resources, is recognized as a promising direction. The aim of the study was to develop a resource-saving technology for producing a dry foaming agent based on keratin hydrolysate. As an alternative to the energy-intensive vacuum–radiation drying process and the expensive pre–concentration stage, it is proposed to use the introduction of a thickener, guar gum, followed by convective drying. The authors scientifically substantiated and experimentally confirmed the choice of guar gum as a rational rheological modifier. It has been found that it forms a stable structural framework that effectively prevents the drainage and coalescence of bubbles, and demonstrates synergy with protein components, providing high kinetic stability of the foam. The article presents the results of determining the rational parameters of the foaming process: the whisk rotation speed is 1600 rpm and the duration is 180 seconds, which ensures the maximum multiplicity and stability of the foam structure. It was found that the introduction of guar gum at a concentration of 0.35...0.40% makes it possible to obtain a foam with high stability (half-life of 35...40 minutes) and optimal structural and mechanical properties suitable for effective removal and subsequent convective drying. The comparison with known analogues confirms the adequacy and competitiveness of the results obtained, which makes it possible to recommend this technology for implementation in production practice.
- 17 December 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (3) , 191-197
Open AccessStudy of the effect of the regime parameters of mechanical foaming of keratin hydrolysate with a thickener in foam concrete technology
The modern concept of building new-generation residential buildings, focused on energy efficiency, environmental safety, economic feasibility and flexibility of planning solutions, creates a steady demand for lightweight, durable and durable thermal insulation materials. In this context, foam concrete is of considerable interest, and its key component is highly effective foaming agents. The development of protein foaming agents based on hydrolysates of keratin–containing raw materials, in particular, poultry processing waste - peropukhovy raw materials, which makes it possible to solve the problem of recycling secondary resources, is recognized as a promising direction. The aim of the study was to develop a resource-saving technology for producing a dry foaming agent based on keratin hydrolysate. As an alternative to the energy-intensive vacuum–radiation drying process and the expensive pre–concentration stage, it is proposed to use the introduction of a thickener, guar gum, followed by convective drying. The authors scientifically substantiated and experimentally confirmed the choice of guar gum as a rational rheological modifier. It has been found that it forms a stable structural framework that effectively prevents the drainage and coalescence of bubbles, and demonstrates synergy with protein components, providing high kinetic stability of the foam. The article presents the results of determining the rational parameters of the foaming process: the whisk rotation speed is 1600 rpm and the duration is 180 seconds, which ensures the maximum multiplicity and stability of the foam structure. It was found that the introduction of guar gum at a concentration of 0.35...0.40% makes it possible to obtain a foam with high stability (half-life of 35...40 minutes) and optimal structural and mechanical properties suitable for effective removal and subsequent convective drying. The comparison with known analogues confirms the adequacy and competitiveness of the results obtained, which makes it possible to recommend this technology for implementation in production practice.
- Open Access
- 8 October 2025
- Published by Kemerovo State University in Food Processing: Techniques and Technology
- p. 454-467
Combined Energy Supply Drying of Fish Eggs and Lecithin Clot Based on Dehydration Kinetics: Mathematical Model Adaptation
Removing moisture from biological materials has many advantages since reduced volume means lower processing costs, and drying prevents microbial growth and spoilage. Despite the fact that different drying methods pursue the same goal, they differ conceptually and require modification/adaptation, depending on the biomaterial. The article describes the kinetics and optimal dehydration modes that increase the drying efficiency of quasi-liquid products (roe and skein complex) using physical and mathematical modeling of heat and mass transfer and moisture removal. The existing mathematical model for drying with combined energy supply was adapted to fish eggs and lecithin clot. The dehydration kinetics made it possible to understand the temperature distribution inside the dried biomaterial and estimate the drying time. A gas mix served as a drying agent. The calculations were compared with the experimental drying tests for similar biomaterials. The materials were subjected to dehydration in the mode of conductive-convective heat supply in an original laboratory drying unit. The authors identified the kinetic patterns and rational mode parameters to increase the performance. The rational operating parameters included the intensity of the coolant movement (3.50 m/s); the height of the dried layer (0.01 m); the surface temperature of the dried material and the temperature of the heating plate (313 K); the initial temperature (283 K); the final moisture content (0.10 kg/kg). Under these parameters, the specific productivity was 7.610 kg/(m2·h), and the drying time to 0.1 kg/kg humidity was 150 min. The rational operating parameters of the lecithin clot included the coolant feeding rate (2.50 m/s); the layer height (0.003 m); the surface temperature of the dried material and the temperature of the heating plate (343 K); the initial temperature (328 K); the final humidity (0.130 kg/kg). In this case, the specific productivity was 13.630 kg/(m2·h), and the drying time to 0.130 kg/kg humidity was 40 min. Heat and mass transfer modeling increases the accuracy of calculation, making it possible to realize the energy saving potential without preliminary experiments while maintaining the quality of the dried product. In this research, the kinetic patterns, optimal dehydration modes, and drying models can be applied to heat and mass transfer processes under different production conditions, as well as to design new drying units for fish eggs and lecithin curd.
- 8 October 2025
- Published by Kemerovo State University in Food Processing: Techniques and Technology
- p. 454-467
Open AccessCombined Energy Supply Drying of Fish Eggs and Lecithin Clot Based on Dehydration Kinetics: Mathematical Model Adaptation
Removing moisture from biological materials has many advantages since reduced volume means lower processing costs, and drying prevents microbial growth and spoilage. Despite the fact that different drying methods pursue the same goal, they differ conceptually and require modification/adaptation, depending on the biomaterial. The article describes the kinetics and optimal dehydration modes that increase the drying efficiency of quasi-liquid products (roe and skein complex) using physical and mathematical modeling of heat and mass transfer and moisture removal. The existing mathematical model for drying with combined energy supply was adapted to fish eggs and lecithin clot. The dehydration kinetics made it possible to understand the temperature distribution inside the dried biomaterial and estimate the drying time. A gas mix served as a drying agent. The calculations were compared with the experimental drying tests for similar biomaterials. The materials were subjected to dehydration in the mode of conductive-convective heat supply in an original laboratory drying unit. The authors identified the kinetic patterns and rational mode parameters to increase the performance. The rational operating parameters included the intensity of the coolant movement (3.50 m/s); the height of the dried layer (0.01 m); the surface temperature of the dried material and the temperature of the heating plate (313 K); the initial temperature (283 K); the final moisture content (0.10 kg/kg). Under these parameters, the specific productivity was 7.610 kg/(m2·h), and the drying time to 0.1 kg/kg humidity was 150 min. The rational operating parameters of the lecithin clot included the coolant feeding rate (2.50 m/s); the layer height (0.003 m); the surface temperature of the dried material and the temperature of the heating plate (343 K); the initial temperature (328 K); the final humidity (0.130 kg/kg). In this case, the specific productivity was 13.630 kg/(m2·h), and the drying time to 0.130 kg/kg humidity was 40 min. Heat and mass transfer modeling increases the accuracy of calculation, making it possible to realize the energy saving potential without preliminary experiments while maintaining the quality of the dried product. In this research, the kinetic patterns, optimal dehydration modes, and drying models can be applied to heat and mass transfer processes under different production conditions, as well as to design new drying units for fish eggs and lecithin curd.
- 1 October 2025
- Published by Springer Nature
- p. 15-38
Integrating Digital Simulation and Sustainable Practices in Persimmon Extraction Processes
- 1 October 2025
- Published by Springer Nature
- p. 15-38
Integrating Digital Simulation and Sustainable Practices in Persimmon Extraction Processes
- Open Access
- 30 May 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (2) , 51-63
Whole-grain spelt pasta with increased dietary fiber content due to persimmon byproducts
Persimmon fruits are one of the most widely cultivated fruit crops worldwide, they are widely distributed in Asian and European countries, and their production is growing along with consumer demand, including in Russia. Persimmon is a good source of nutrients and bioactive compounds, especially dietary fiber, carotenoids and phenolic compounds, among other bioactive phytochemicals. Persimmon is one of the fruits that not only has a limited shelf life but also significant losses at harvest, i.e. it is a seasonal perishable fruit that is difficult to store and transport, due to which almost one-fifth of all fruits grown are simply discarded. Currently, there is an increase in the valorization of unsaleable and storable persimmon fruits to create opportunities for their complex processing and full use in various food processing industries. This article considers the possibility of potential use of dry powder from persimmon fruits that have passed the extraction processing stage in the production of whole-grain spelt pasta for their enrichment with dietary fiber. It is well known that pasta products are considered to be good carriers of biologically active substances, in connection with which the aim of this study was set, which was to improve the technology of whole-grain pasta products with increased content of dietary fiber due to the use of persimmon powder in their formulation. To achieve this goal, experimental studies were carried out both drying of the obtained persimmon fruit raffinate and determining the rational share of the obtained powder in the pasta dough composition. The result of the study confirmed the feasibility of using dried persimmon fruit powder in the production of whole-grain spelt pasta, including due to the conducted organoleptic analysis of the obtained pasta products in both initial and boiled forms.
- 30 May 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (2) , 51-63
Open AccessWhole-grain spelt pasta with increased dietary fiber content due to persimmon byproducts
Persimmon fruits are one of the most widely cultivated fruit crops worldwide, they are widely distributed in Asian and European countries, and their production is growing along with consumer demand, including in Russia. Persimmon is a good source of nutrients and bioactive compounds, especially dietary fiber, carotenoids and phenolic compounds, among other bioactive phytochemicals. Persimmon is one of the fruits that not only has a limited shelf life but also significant losses at harvest, i.e. it is a seasonal perishable fruit that is difficult to store and transport, due to which almost one-fifth of all fruits grown are simply discarded. Currently, there is an increase in the valorization of unsaleable and storable persimmon fruits to create opportunities for their complex processing and full use in various food processing industries. This article considers the possibility of potential use of dry powder from persimmon fruits that have passed the extraction processing stage in the production of whole-grain spelt pasta for their enrichment with dietary fiber. It is well known that pasta products are considered to be good carriers of biologically active substances, in connection with which the aim of this study was set, which was to improve the technology of whole-grain pasta products with increased content of dietary fiber due to the use of persimmon powder in their formulation. To achieve this goal, experimental studies were carried out both drying of the obtained persimmon fruit raffinate and determining the rational share of the obtained powder in the pasta dough composition. The result of the study confirmed the feasibility of using dried persimmon fruit powder in the production of whole-grain spelt pasta, including due to the conducted organoleptic analysis of the obtained pasta products in both initial and boiled forms.
- Open Access
- 28 March 2025
- Published by Kemerovo State University in Food Processing: Techniques and Technology
- Vol. 55 (1) , 74-88
Extracting Target Components from Fresh and Refined Sac Roe: Kinetic Patterns
Sac roe makes up 20% of all industrial fish waste. Due to its high nutritional and biological value, sac roe can be recycled into protein concentrates and fractionated lecithin. However, the extraction is a complex technological operation that requires sophisticated hardware. The article describes the kinetic patterns of the extraction processes of target components from sac roe and refined sax roe obtained after the first stage of selective extraction. The study involved fresh and refined sac roe of silver carp, carp, pike perch, and catfish, as well as acetone and alcohol extracts. The main methods included tensometry, colorimetry, and pycnometry; the data obtained were subjected to mathematical statistics in line with the system approach. The experiments involved an air thermostat with constant atmospheric pressure and temperature, as well as a laboratory shaker with three modes. The acetone extraction lasted 45 min for the dry sample and 65 min for the fresh sample; the alcohol extraction of the refined sample was 35 min. The rate data analysis based on experimental mass transfer curves revealed that the extraction time could be rationalized to optimal values. The mass transfer stages on the kinetic curves did not contradict the extraction theory, which means that the obtained data can be used in engineering practice.
- 28 March 2025
- Published by Kemerovo State University in Food Processing: Techniques and Technology
- Vol. 55 (1) , 74-88
Open AccessExtracting Target Components from Fresh and Refined Sac Roe: Kinetic Patterns
Sac roe makes up 20% of all industrial fish waste. Due to its high nutritional and biological value, sac roe can be recycled into protein concentrates and fractionated lecithin. However, the extraction is a complex technological operation that requires sophisticated hardware. The article describes the kinetic patterns of the extraction processes of target components from sac roe and refined sax roe obtained after the first stage of selective extraction. The study involved fresh and refined sac roe of silver carp, carp, pike perch, and catfish, as well as acetone and alcohol extracts. The main methods included tensometry, colorimetry, and pycnometry; the data obtained were subjected to mathematical statistics in line with the system approach. The experiments involved an air thermostat with constant atmospheric pressure and temperature, as well as a laboratory shaker with three modes. The acetone extraction lasted 45 min for the dry sample and 65 min for the fresh sample; the alcohol extraction of the refined sample was 35 min. The rate data analysis based on experimental mass transfer curves revealed that the extraction time could be rationalized to optimal values. The mass transfer stages on the kinetic curves did not contradict the extraction theory, which means that the obtained data can be used in engineering practice.
- Open Access
- 29 January 2025
- Published by Krasnoyarsk State Agrarian University in Bulletin of KSAU
- No. 1,p. 168-182
IDENTIFICATION OF THE DRIVING FORCE BEHIND THE EXTRACTION OF WATER-SOLUBLE SUBSTANCES FROM PERSIMMON PULP
The aim of the study is to determine the driving force of the process of extraction of water-soluble substances from persimmon pulp based on information about its kinetics and hydrodynamics, as well as to study the statics of this operation, in particular the distribution coefficients of the equilibrium concentrations of the extracted substance in both phases. Tasks: to study the statistical patterns of the operation of extraction of water-soluble substances from persimmon pulp in order to determine the distribution coefficients of the equilibrium concentrations of the extracted substance in both phases, which determines the driving force of the process; to identify the driving force of the process of extraction of water-soluble substances from persimmon pulp without the use of ultrasound based on information about the kinetics and hydrodynamics of the studied mass transfer; to identify the driving force of the process of extraction of water-soluble substances from persimmon pulp using ultrasound based on information about the kinetics and hydrodynamics of the studied mass transfer. The object of the study is persimmon fruits of the Hyakume, Sharon, Korolek varieties, grown in the south of the Russian Federation, in particular in the Republic of Crimea in the National Scientific Center of the Russian Academy of Sciences (Nikitsky Botanical Garden). The obtained data on the identification of kinetic patterns of extraction of components soluble in water from persimmon pulp, as well as on the determination of the distribution coefficient of equilibrium concentrations of the extracted substance in both phases made it possible to identify the rational duration of extraction both with and without exposure to ultrasound, and to obtain mathematical dependencies of the driving force of the process, knowledge of which is necessary for constructing a mathematical model of mass transfer.
- 29 January 2025
- Published by Krasnoyarsk State Agrarian University in Bulletin of KSAU
- No. 1,p. 168-182
Open AccessIDENTIFICATION OF THE DRIVING FORCE BEHIND THE EXTRACTION OF WATER-SOLUBLE SUBSTANCES FROM PERSIMMON PULP
The aim of the study is to determine the driving force of the process of extraction of water-soluble substances from persimmon pulp based on information about its kinetics and hydrodynamics, as well as to study the statics of this operation, in particular the distribution coefficients of the equilibrium concentrations of the extracted substance in both phases. Tasks: to study the statistical patterns of the operation of extraction of water-soluble substances from persimmon pulp in order to determine the distribution coefficients of the equilibrium concentrations of the extracted substance in both phases, which determines the driving force of the process; to identify the driving force of the process of extraction of water-soluble substances from persimmon pulp without the use of ultrasound based on information about the kinetics and hydrodynamics of the studied mass transfer; to identify the driving force of the process of extraction of water-soluble substances from persimmon pulp using ultrasound based on information about the kinetics and hydrodynamics of the studied mass transfer. The object of the study is persimmon fruits of the Hyakume, Sharon, Korolek varieties, grown in the south of the Russian Federation, in particular in the Republic of Crimea in the National Scientific Center of the Russian Academy of Sciences (Nikitsky Botanical Garden). The obtained data on the identification of kinetic patterns of extraction of components soluble in water from persimmon pulp, as well as on the determination of the distribution coefficient of equilibrium concentrations of the extracted substance in both phases made it possible to identify the rational duration of extraction both with and without exposure to ultrasound, and to obtain mathematical dependencies of the driving force of the process, knowledge of which is necessary for constructing a mathematical model of mass transfer.