Yinlong Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yinlong Liu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Guoqiang Xu
3 shared publications- Yanchen Fu
Beihang University
2 shared publications - Fei Qin
National Key Laboratory of Solid Propulsion, Northwestern Polytechnical University 1 , Xi'an, Shaanxi 710129
1 shared publication Jiaxin Chen
1 shared publication- Jiaxin Chen
College of Engineering, Monash University, Melbourne 3800, Australia
1 shared publication Jie Wen
1 shared publication
Latest Publications
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Interjet vortex coupling and mixing in spanwise transverse jet arrays of supercritical hydrocarbon fuel
Fuel injection and mixing play a critical role in supersonic combustion of air-breathing engines, such as scramjet, rocket-based combined-cycle, and turbine-based combined-cycle engines. Supercritical hydrocarbon fuel is usually transversely injected into combustors, where the jet evolution and mixing efficiency are jointly governed by real-gas effects, compressibility, shock structures, and vortex-driven transport. In this work, a three-dimensional numerical model incorporating real-gas thermophysical properties is developed to examine the coupling of multiple transverse jets. Under the investigated non-reacting conditions, finite spacing redistributes the streamwise vortices across the array: neighboring plumes restrict the inner counter-rotating vortex pairs (CVP) and interjet entrainment, whereas the exterior vortices develop with less lateral confinement and become the principal large-scale entrainment structures downstream. The resulting effect of spacing is not universal, but varies with injection pressure and the coupled crossflow condition. At M∞ = 1.89 and Pr = 1.47, larger spacing preserves independent shear layers and improves mixing over most downstream locations. Increasing Pr to 1.96 promotes plume penetration and early merger, thereby weakening the spacing effect. At the lower freestream Mach number M∞ = 0.71, the combined effects of reduced dynamic-pressure confinement and increased J allow stronger CVP development and yield higher mixing efficiency. Results obtained in this paper provide a solid foundation for fuel-injection configuration design and mixing-performance optimization in air-breathing engines.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Interjet vortex coupling and mixing in spanwise transverse jet arrays of supercritical hydrocarbon fuel
Fuel injection and mixing play a critical role in supersonic combustion of air-breathing engines, such as scramjet, rocket-based combined-cycle, and turbine-based combined-cycle engines. Supercritical hydrocarbon fuel is usually transversely injected into combustors, where the jet evolution and mixing efficiency are jointly governed by real-gas effects, compressibility, shock structures, and vortex-driven transport. In this work, a three-dimensional numerical model incorporating real-gas thermophysical properties is developed to examine the coupling of multiple transverse jets. Under the investigated non-reacting conditions, finite spacing redistributes the streamwise vortices across the array: neighboring plumes restrict the inner counter-rotating vortex pairs (CVP) and interjet entrainment, whereas the exterior vortices develop with less lateral confinement and become the principal large-scale entrainment structures downstream. The resulting effect of spacing is not universal, but varies with injection pressure and the coupled crossflow condition. At M∞ = 1.89 and Pr = 1.47, larger spacing preserves independent shear layers and improves mixing over most downstream locations. Increasing Pr to 1.96 promotes plume penetration and early merger, thereby weakening the spacing effect. At the lower freestream Mach number M∞ = 0.71, the combined effects of reduced dynamic-pressure confinement and increased J allow stronger CVP development and yield higher mixing efficiency. Results obtained in this paper provide a solid foundation for fuel-injection configuration design and mixing-performance optimization in air-breathing engines.
- Open Access
Sustainable Aviation Fuels in Aerospace Propulsion Systems: A Review from Engine Compatibility to Thermal Management
Sustainable aviation fuel is among the most practical near-term routes for aviation decarbonization because it can be used in existing aircraft, engines, and airport fuel systems with limited infrastructure changes while minimizing disruption to the aviation fuel supply chain. This review examines SAF applications in aerospace propulsion systems, focusing on production pathways, aero-engine compatibility, property prediction, and fuel heat sink potential. It compares hydroprocessed esters and fatty acids (HEFA), Fischer–Tropsch (FT), alcohol-to-jet (ATJ), synthesized iso-paraffins (SIP), and power-to-liquid (PtL) fuels in terms of feedstock type, process complexity, product composition, and blending constraints. It also assesses how molecular composition governs density, cold-flow behavior, thermal stability, coking propensity, seal compatibility, and emissions. Recent advances in molecular dynamics, machine learning, spectroscopic analysis, and uncertainty quantification show a shift from empirical estimation toward composition-based prediction, prescreening, and fuel design. For high-thermal-load propulsion systems, SAF is further evaluated as a fuel heat sink in active regenerative cooling. Current evidence points to advantages in thermal stability and low coking tendency, but important gaps remain in transcritical and supercritical heat transfer, pyrolytic heat absorption, wall-material effects, coke deposition, and heat sink capacity modeling across wide operating ranges.
Open AccessSustainable Aviation Fuels in Aerospace Propulsion Systems: A Review from Engine Compatibility to Thermal Management
Sustainable aviation fuel is among the most practical near-term routes for aviation decarbonization because it can be used in existing aircraft, engines, and airport fuel systems with limited infrastructure changes while minimizing disruption to the aviation fuel supply chain. This review examines SAF applications in aerospace propulsion systems, focusing on production pathways, aero-engine compatibility, property prediction, and fuel heat sink potential. It compares hydroprocessed esters and fatty acids (HEFA), Fischer–Tropsch (FT), alcohol-to-jet (ATJ), synthesized iso-paraffins (SIP), and power-to-liquid (PtL) fuels in terms of feedstock type, process complexity, product composition, and blending constraints. It also assesses how molecular composition governs density, cold-flow behavior, thermal stability, coking propensity, seal compatibility, and emissions. Recent advances in molecular dynamics, machine learning, spectroscopic analysis, and uncertainty quantification show a shift from empirical estimation toward composition-based prediction, prescreening, and fuel design. For high-thermal-load propulsion systems, SAF is further evaluated as a fuel heat sink in active regenerative cooling. Current evidence points to advantages in thermal stability and low coking tendency, but important gaps remain in transcritical and supercritical heat transfer, pyrolytic heat absorption, wall-material effects, coke deposition, and heat sink capacity modeling across wide operating ranges.
- Open Access
- 24 March 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 69
Experimental investigation of convective heat transfer to supercritical pressure n-decane and RP-3 under trans-critical and cracking states
- 24 March 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 69
Open AccessExperimental investigation of convective heat transfer to supercritical pressure n-decane and RP-3 under trans-critical and cracking states
- 23 January 2025
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 70 (2) , 827-834
Viscosity Measurements of Endothermic Propellant EHF-TU and Aviation Kerosene RP-3 under Supercritical Pressures
- 23 January 2025
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 70 (2) , 827-834
Viscosity Measurements of Endothermic Propellant EHF-TU and Aviation Kerosene RP-3 under Supercritical Pressures
- Open Access
Annual Electricity and Energy Consumption Forecasting for the UK Based on Back Propagation Neural Network, Multiple Linear Regression, and Least Square Support Vector Machine
The long-term demand forecast for annual national electricity and energy consumption plays a vital role in future strategic planning, power system installation programming, energy investment planning, and next-generation unit construction. Three machine learning algorithms of BP-NN, MLR, and LS-SVM were chosen for training forecasting models, with the data on population, GDP, mean temperature, sunshine, rainfall, and frost days in 1993–2019 serving as the input variables. The total data were divided by 70% into the training set (1993–2011) and 30% into the test set (2012–2019), in chronological order. RMSE, MAPE, and MaxError were adopted as the performance criteria. The statistical results show that the gross population of the UK increases year by year from 1993 to 2020. The GDP generally increases before 2007 but has a decline, and then varies with a large amplitude afterward. The electricity and energy consumption of the UK generally increase from 1993 and reach a peak around 2005. Afterward, a decline occurs basically year by year until 2019. The simulation results reveal that all three models predict well on the training set but have some overestimation on the test set. The LS-SVM model has the best forecasting performance among the three models on the training set. The results show that it is feasible to use machine learning algorithms to predict the future electricity and energy consumption of a country based on past economic and livelihood data. In this way, economic decision-makers can rely on the predicted values to make a well-founded layout for future energy construction and investment to avoid waste or a shortage of resources.
Open AccessAnnual Electricity and Energy Consumption Forecasting for the UK Based on Back Propagation Neural Network, Multiple Linear Regression, and Least Square Support Vector Machine
The long-term demand forecast for annual national electricity and energy consumption plays a vital role in future strategic planning, power system installation programming, energy investment planning, and next-generation unit construction. Three machine learning algorithms of BP-NN, MLR, and LS-SVM were chosen for training forecasting models, with the data on population, GDP, mean temperature, sunshine, rainfall, and frost days in 1993–2019 serving as the input variables. The total data were divided by 70% into the training set (1993–2011) and 30% into the test set (2012–2019), in chronological order. RMSE, MAPE, and MaxError were adopted as the performance criteria. The statistical results show that the gross population of the UK increases year by year from 1993 to 2020. The GDP generally increases before 2007 but has a decline, and then varies with a large amplitude afterward. The electricity and energy consumption of the UK generally increase from 1993 and reach a peak around 2005. Afterward, a decline occurs basically year by year until 2019. The simulation results reveal that all three models predict well on the training set but have some overestimation on the test set. The LS-SVM model has the best forecasting performance among the three models on the training set. The results show that it is feasible to use machine learning algorithms to predict the future electricity and energy consumption of a country based on past economic and livelihood data. In this way, economic decision-makers can rely on the predicted values to make a well-founded layout for future energy construction and investment to avoid waste or a shortage of resources.
- 1 March 2019
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 130, 778-786
Flow resistance and convective heat transfer performances of airflow through helical-tube bundles
- 1 March 2019
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 130, 778-786
Flow resistance and convective heat transfer performances of airflow through helical-tube bundles