YJYoung Mu Jeon

Young Mu Jeon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Young Mu Jeon has a total of 408 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Spatiotemporal structure of edge harmonic oscillation and its role in ELM-free QH-mode at KSTAR

    by Jaehyun Lee, SangKyeun Kim, Young-Mu Jeon, Minwoo Kim, Dong-Kwon Kim, Gunsu S. Yun

    In Quiescent H-mode (QH-mode), edge-localized modes (ELMs) are naturally replaced by a low- n edge harmonic oscillation (EHO), yet the self-regulating transport mechanism driven by the EHO remains insufficiently understood. Using high-spatiotemporal-resolution imaging diagnostics on KSTAR—electron cyclotron emission imaging and broadband electron cyclotron emission—we resolve the eigenmode structure of the EHO and elucidate its regulatory role in edge transport. The EHO is localized within the pedestal near the maximum pressure gradient, propagates in the ion-diamagnetic direction, and its radial envelope expands with increasing shear, suggesting that rotational shear is closely associated with the structural evolution of the EHO. Information-theoretic Transfer Entropy analysis identifies a distinct ‘dual-stabilization’ regulatory interaction pattern: the EHO is associated with enhanced outward energy transport to limit the pressure gradient, while the background shear flow is associated with preferential regulatory influence on the EHO saturation amplitude and energy flux. These results demonstrate that the QH-mode pedestal is sustained by a shear-associated regulation mechanism, where the coupling between rotational shear and mode structure appears closely linked to the sustained ELM-free state.

  • Open Access

    Overview of the KSTAR experiments and future plan

    by Yong Un Nam, H. Han, H.H. Lee, J. Chung, Y.M. Jeon, G.Y. Park, J. Kim, K. Kim, M. Kim, J. Ko, et al.

    The Korea Superconducting Tokamak Advanced Research (KSTAR) device has recently entered a new phase of operation following the installation of a tungsten mono-block divertor, providing a unique platform to investigate high-performance, long-pulse plasma scenarios for future reactors. The 2023–2024 experimental campaigns demonstrated significant progress in commissioning the tungsten divertor, developing plasma operation scenarios, and achieving real-time control. Comparative studies revealed increased core radiation losses and associated performance degradation relative to the carbon divertor environment. Alleviation strategies, such as optimized neutral beam injection timing, boron powder seeding, and impurity control through gas puffing, were shown to reduce tungsten accumulation and extend high-performance phases, including record H-mode operation exceeding 100 s. International collaboration enabled the first demonstration of high poloidal beta scenarios with an internal transport barrier on KSTAR. Advances in control included upgraded real-time resonant magnetic perturbation schemes and disruption forecasting via the DECAF system. Furthermore, divertor detachment control using a new surrogate-model-based approach with real-time radiation imaging demonstrated active impurity and heat flux management. Supported by enhanced heating, current drive, and diagnostic systems, these achievements offer valuable insights into tungsten impurity behavior, transport physics, and control strategies for future reactors including ITER. Planned upgrades toward a full-tungsten wall and ITER-aligned real-time plasma control will further establish KSTAR as a leading experimental platform for developing operational scenarios required to achieve steady-state, burning plasma conditions.


  • Open Access

    Developing the hybrid scenario in DIII-D and KSTAR for W-compatible long-pulse operation

    by SangKyeun Kim, Brian S Victor, Youngho Lee, Jin Myung Park, Francesca Turco, Tomas Odstrcil, Qiming Hu, Alessandro Bortolon, Arsene Stephane Tema Biwole, William Samuel Boyes, et al.

    Long-pulse, high-performance operation with tungsten plasma-facing components is a crucial challenge for achieving steady-state goals in ITER and future fusion devices. This paper presents a joint international effort between the DIII-D and KSTAR tokamaks aimed at demonstrating the compatibility of the high q95~6 hybrid scenario with a tungsten divertor and superconducting coils. A DIII-D hybrid scenario recipe is successfully tailored to KSTAR’s operational constraints, which facilitates cross-device studies. The results show successful 30-second long-pulse operation in KSTAR at a normalized beta (~2.4) with a benign m/n=4/3 mode and effective mitigation of tungsten accumulation. Despite this success, the KSTAR scenario exhibits a greater than 25\% reduction in thermal confinement compared to the DIII-D reference. To investigate this discrepancy, we performed a predictive TGYRO validation study, which suggests that the difference is likely caused by a weaker temperature pedestal in the KSTAR discharge due to a higher and narrower density pedestal. In addition, such lower thermal confinement leads to higher impurity accumulation, possibly due to a change in neoclassical transport with increased inward pinch, which further degrades global confinement. We also report that stationary, long-pulse operation with sustained thermal confinement requires consistent fueling and wall conditioning. These findings highlight the importance of optimized fueling and real-time wall conditioning in achieving a high temperature pedestal and strong global confinement during stable long-pulse operation. We propose potential approaches toward fully steady-state, long-pulse operation, including real-time wall conditioning using an impurity dropper in KSTAR and future tokamaks.


  • Open Access

    An overview of 3D field optimization for control of transport and edge instabilities on KSTAR

    by J.A. Snipes, J. Butt, C.S. Byun, T. Cote, K. Erickson, H.G. Frerichs, S.H. Hahn, Q. Hu, Y.M. Jeon, V. Khavin, et al.

    An international team from several laboratories and universities has made key advances over the last few years in the control of plasma transport and edge instabilities with applied 3D fields in the KSTAR tokamak to optimize long pulse operation scenarios. This overview begins with the optimization of both core and edge resonant magnetic perturbations (RMPs) to improve fast ion confinement to avoid excessive limiter heat loads due to fast ion losses and successful modeling of the experimental results. Integrated and advanced plasma control techniques with machine learning (ML) and adaptive control were then used to optimize the 3D field spectrum in real-time to control edge localized modes (ELMs) while avoiding core locked modes that could disrupt the plasma. Accelerating the offline model of 3D fields with a surrogate ML model can optimize ELM suppression in the edge while limiting the impact of the applied RMP fields deeper in the plasma core in real-time. In addition, the impact of the 3D fields on the divertor heat load has been modeled and compared with experimental measurements. An analysis of a multi-machine database including KSTAR has been performed to better understand the metrics for the observed RMP thresholds for ELM suppression and the resulting plasma performance. Predictive modeling of the operational space for ELM suppression and density pumpout due to RMP has shown the importance of magnetic islands in the plasma edge and their impact on plasma turbulence. This research has culminated in the development of successful long pulse operational scenarios on KSTAR while attempting to overcome challenges of the new tungsten divertor.


  • Open Access

    Extending the operational boundaries of RMP-ELM suppression with optimized 3D field control

    by S.M. Yang, J.K. Park, S.K. Kim, S.H. Hahn, N.C. Logan, Q. Hu, M.W. Kim, G.W. Shin, W.H. Ko, Y.M. Jeon, et al.

    The use of 3D magnetic fields is one of the promising approaches to control edge localized modes (ELMs), and ITER has plans to utilize a flexible 3D coil set for ELM suppression using 3D fields. This study focuses on optimizing the 3D field spectrum to expand the operational window for n = 1 resonant magnetic perturbation (RMP) ELM suppression in KSTAR. The optimized n = 1 RMP effectively suppresses ELMs throughout the entire H-mode discharge, including the first ELM crash, while avoiding the onset of disruptive locked modes in low-density L-mode plasmas. The predicted suppression window aligns well with experimental data, highlighting the challenges and solutions of using n = 1 RMP at low densities. Moreover, the optimization successfully achieved n = 1 RMP ELM suppression for the first time in ITER-relevant q 95 and shaping conditions, including cases with q 95 as low as 3.6, as well as other q 95 and shape configurations. This highlights the importance and utility of 3D coil optimization while emphasizing the potential of long-wavelength low-n RMP, which will be valuable for ex-vessel coils designed to avoid complications of nuclear degradation.


  • Open Access

    Unified ELM suppression on KSTAR and DIII-D via adaptive feedback control strategies

    by R. Shousha, S.K. Kim, K.G. Erickson, S.H. Hahn, A.O. Nelson, N.C. Logan, S.M. Yang, Q.M. Hu, R. Wilcox, J.-K. Park, et al.

    This paper reports on the extension of our amplitude-based resonant magnetic perturbation (RMP) edge localized mode (ELM) controller to support phasing control (relative toroidal phases of RMP waveforms between rows of coils), multiple toroidal mode numbers, and new ‘jump’ and ‘probing’ strategies, all deployed on KSTAR and DIII-D. By treating the control algorithm as device-independent and adjusting only the real-time interfaces to sensors and power supplies, we have confirmed that the same finite state machine—based feedback logic can be ported between machines with minor modifications. In experiments using n = 2 RMPs on KSTAR and n = 3 on DIII-D, the controller successfully modulated RMP amplitudes in real time to sustain ELM suppression while minimizing confinement degradation. Phasing control broadened the suppression window, as it permitted the system to avoid locked-mode regions and safely access ELM-free conditions. A rotating RMP phasing scheme, integrated into the same framework, distributes divertor heat loads more uniformly, making it a promising strategy for protecting plasma-facing components during long discharges. New ‘jump’ and ‘probing’ techniques demonstrate the possibility for the controller to preempt imminent ELMs and refine the minimum required RMP amplitude without returning to ELMy conditions. Taken together, these upgrades enable extended ELM-free operation while mitigating confinement degradation, providing a practical framework for real-time ELM control in future high-performance tokamaks.


  • Top Cited Papers
    Open Access

    The new ITER baseline, research plan and open R&D issues

    by A Loarte, R A Pitts, T Wauters, I Nunes, P de Vries, S H Kim, F Köchl, A Polevoi, M Lehnen, J Artola, et al.

    A new baseline (NB) has been proposed by the ITER Project to ensure a robust achievement of the Projects’ goals, in view of past challenges including delays incurred due to the Covid-19 pandemic, technical challenges in completing first-of-a-kind components and in nuclear licensing. The NB includes modifications to the configuration of the ITER device and its ancillaries (e.g. change from beryllium to tungsten as first wall material, modification of the heating and current drive mix, etc.) as well as additional testing of components (e.g. toroidal field coils) or phased installation (start with inertially cooled first wall before later installation of the final actively water-cooled components) to minimise operational risks. In the NB, the ITER research plan (IRP) will be divided into three main phases: (a) start of research operation, with 40 MW of ECH and 10 MW of ICH, which will focus on the demonstration of 15 MA operation in L-mode, commissioning of all required systems, including disruption mitigation, and the demonstration of H-mode plasma operation in deuterium; (b) DT-1, with 60–67 MW of ECH, 33 MW of neutral beam injection (NBI) and 10–20 MW of ICH, which will demonstrate robust operation in high confinement H-mode plasmas in DT up to Q ⩾ 10 and for burn durations of 300–500 s within an accumulated neutron fluence of ∼1% of the ITER machine’s lifetime total, and; (c) DT-2, with up to 67 MW of ECH, up to 49.5 MW of NBI and up to 20 MW of ICH, with the ITER tokamak and ancillaries in their final configuration to demonstrate routine operation in DT plasmas at high Q and the Q ⩾ 5 long-pulse and steady-state scenarios to the final neutron fluence and to perform R&D on nuclear fusion reactor issues. The logic, physics basis, modelling and experimental evaluations carried out to support the NB and the associated IRP are described. These include the impact of the tungsten wall on plasma scenarios and associated risk mitigation measures, as well as the optimisation of the tokamak components and ancillaries to minimise Project risks. Open R&D issues related to these evaluations and mitigation measures are also described together with experimental, modelling and validation activities required to address them.


  • Open Access

    Experimental identification of I-mode characteristics at the edge of FIRE mode in KSTAR

    by Chweeho Heo, SangJin Park, GyungJin Choi, Jaewook Kim, Eun-Jin Kim, YoungMu Jeon, Minjun J. Choi, Hyunsun Han, Choongki Sung, TaikSoo Hahm, et al.

    The edge region of the recently discovered fast ion-regulated enhancement mode (FIRE mode) (Han and Park et al 2022 Nature 609 269–275), which primarily operates in the unfavorable ion ∇ B drift configuration, is investigated in detail for the first time. An ion temperature pedestal is identified, while the edge electron density profile remains at low-confinement mode (L-mode) level, displaying characteristics of the edge profiles in improved energy confinement mode (I-mode). The weakly coherent mode (WCM) is observed at around 50 kHz in the spectrum of edge electron density fluctuations measured by beam emission spectroscopy. The weakly coherent feature becomes more pronounced as the amplitude of intermediate-frequency fluctuations (approximately 10–30 kHz) decreases, coinciding with a rise in the height of the temperature pedestal. The WCM propagates in the ion diamagnetic drift direction in the laboratory frame, but its propagation direction in the E × B flow frame has yet to be determined. Nonlinear phase coupling between the low-frequency density fluctuation components and the WCMs is identified, indicating the presence of zonal density. This coupling typically occurs as the H-mode transition approaches, and its potential link to a regulatory process is discussed. When the coupling manifests, intermittent bursts are observed concurrently, not just at the radial location where the WCM amplitude peaks, but throughout the edge region. No other coherent oscillations with finite frequency have been detected thus far.


  • Open Access

    Overview of the KSTAR experiments toward fusion reactor

    by Won-Ha Ko, S.W. Yoon, W.C. Kim, J.G. Kwak, K.L. Park, Y.U. Nam, S.J. Wang, J. Chung, B.H. Park, G.Y. Park, et al.

    The Korean Superconducting Tokamak Advanced Research has been focused on exploring the key physics and engineering issues for future fusion reactors by demonstrating the long pulse operation of high beta steady-state discharge. Advanced scenarios are being developed with the goal for steady-state operation, and significant progress has been made in high ℓ i, hybrid and high beta scenarios with β N of 3. In the new operation scenario called fast ion regulated enhanced (FIRE), fast ions play an essential role in confinement enhancement. GK simulations show a significant reduction of the thermal energy flux when the thermal ion fraction decreases and the main ion density gradient is reversed by the fast ions in FIRE mode. Optimization of 3D magnetic field techniques, including adaptive control and real-time machine learning control algorithm, enabled long-pulse operation and high-performance ELM-suppressed discharge. Symmetric multiple shattered pellet injections (SPIs) and real-time disruption event characterization and forecasting are being performed to mitigate and avoid the disruptions associated with high-performance, long-pulse ITER-like scenarios. Finally, the near-term research plan will be addressed with the actively cooled tungsten divertor, a major upgrade of the NBI and helicon current drive heating, and transition to a full metallic wall.


  • Top Cited Papers
    Open Access

    Highest fusion performance without harmful edge energy bursts in tokamak

    by S. K. Kim, R. Shousha, S. M. Yang, Q. Hu, S. H. Hahn, A. Jalalvand, J.-K. Park, N. C. Logan, A. O. Nelson, Y.-S. Na, et al.

    The path of tokamak fusion and International thermonuclear experimental reactor (ITER) is maintaining high-performance plasma to produce sufficient fusion power. This effort is hindered by the transient energy burst arising from the instabilities at the boundary of plasmas. Conventional 3D magnetic perturbations used to suppress these instabilities often degrade fusion performance and increase the risk of other instabilities. This study presents an innovative 3D field optimization approach that leverages machine learning and real-time adaptability to overcome these challenges. Implemented in the DIII-D and KSTAR tokamaks, this method has consistently achieved reactor-relevant core confinement and the highest fusion performance without triggering damaging bursts. This is enabled by advances in the physics understanding of self-organized transport in the plasma edge and machine learning techniques to optimize the 3D field spectrum. The success of automated, real-time adaptive control of such complex systems paves the way for maximizing fusion efficiency in ITER and beyond while minimizing damage to device components.