MEMagdy. B. Eteiba

Magdy. B. Eteiba

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Magdy. B. Eteiba has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Novel Real-Time Fuzzy-Based Optimal Control of the Charging Cycle of a Renewable Energy Microgrid Storage System

    by Ahmed Osama, Dalia Allam, Magdy B. Eteiba

    AI-based optimal power management and online control of the storage system of the renewable energy microgrid in conjunction with the main grid that can respond instantaneously to any change in the load demand optimally and economically are the main target of this work. A novel online optimal control methodology depending on crossbreeding between the fuzzy logic and a nature-inspired technique has been proposed to determine the optimal time of carrying out the charging or discharging of the microgrid storage system and the required percentage of both of them in addition to the determination of the source of charging and the destination of discharging dynamically and economically at each time step to meet the varying of the load demand with minimum operating costs. A developed mathematical formula has been introduced to control the dynamic operation of the microgrid’s storage system. It has changed relying on the created fuzzy rules which provides outstanding accuracy for this complicated time-varying process. Furthermore, simultaneous optimal power management between the power generation as well as the storage system of the renewable microgrid and the main grid has been accomplished optimally and economically via a meta-heuristic optimizer named hunger games optimizer. The accuracy of the new methodology has been proved via a fair comparison with the previously published methods after implementing them on the same bases.


  • Open Access

    Maximum Power Point Tracking Based on Finite Voltage-Set MPC for Grid-Connected Photovoltaic Systems Under Environmental Variations

    by Mohammed A. Hassan, Mahmoud M. Adel, Amr A. Saleh, Magdy B. Eteiba, Ahmed Farhan

    This paper proposes a model predictive control (MPC)-based approach for optimizing the performance of a photovoltaic (PV) system. The proposed method employs finite voltage-set maximum power point tracking (FVS-MPPT), ensuring precise duty cycle adjustment for a boost converter in the PV system considering the environmental changes in irradiation and temperature. Additionally, MPC is implemented for the grid-side converter to determine the optimal switching vector, ensuring precise control of active power via reference d-axis current and the elimination of reactive power by setting the reference q-axis current to zero. This approach optimizes the converter’s performance, maintaining a stable DC-link voltage while ensuring efficient grid integration. To ensure proper synchronization with the grid, a phase-locked loop (PLL) is utilized to provide the necessary grid voltage angle for dq frame transformation. Simulation results highlight the efficiency of the proposed MPC strategy, with the PV-side converter showing a robust response by dynamically adjusting the duty cycle to maintain optimal performance under varying irradiation and temperature conditions. Furthermore, the grid-side converter ensures precise control of active power and eliminates reactive power, enhancing the overall system’s stability and efficiency during grid interactions. A functional comparison of simulation results between the conventional P&O algorithm and the FVS-MPPT approach is presented, demonstrating the enhanced performance of the proposed technique over the conventional method including the total harmonic distortion for both techniques.


  • Open Access

    Evaluating the Harmonic Effects on the Thermal Performance of a Power Transformer

    by Mohamed S. Seddik, Magdy B. Eteiba, Jehan Shazly

    Harmonics in the power grid contribute to increased power losses in both the core and windings of power transformers. These losses lead to abnormal rises in temperature causing overheating and reduce the efficiency of the transformer. If the losses and temperature exceed the values set during the design stage for linear load conditions, it can damage the transformer’s insulating materials and shorten its lifespan. To assess the thermal impact of power system harmonics on transformers under steady-state and transient conditions, the rated losses and harmonic losses of the transformer are calculated. These losses are then inputted into a developed thermal 3D finite element method (FEM) performance model to determine the temperature distribution of transformer components. The numerical results from the thermal model will be compared with data from a Hyundai test report and real measurements from Egypt’s Kureimat power plant, specifically a 750 MW combined cycle power plant. The thermal modeling is focused on a step-up (16.5/240 kV), 240 ± 4 × 2.5%, 180/240/300 MVA power transformer operating in ONAN, ONAF1, and ONAF2 modes. This paper shows that the developed model aligns closely with actual measurements and the HYUNDAI test report. The loss calculations reveal that the discrepancy in total losses, with and without accounting for harmonics, becomes more pronounced as the load increases. Using this model, the presence of grid harmonics results in a higher temperature distribution across transformer components, leading to an increase in the hot spot temperature.


  • Open Access

    Thermal Analysis of Power Transformer Using 2D and 3D Finite Element Method

    by Mohamed S. Seddik, Jehan Shazly, Magdy B. Eteiba

    An accurate simulation and computational analysis of temperature distribution in large power transformers used in power plants is crucial during both the design and operational phases. This study introduces a thermal modeling analysis encompassing two- and three-dimensional (2D and 3D) approaches for power transformers. The mathematical model for heat diffusion follows the Finite Element Method (FEM) approach. Validation of the computed results involves comparing them against measurements from Hyundai’s test report for both 2D and 3D models, aiming to identify the most effective solution. Additionally, the thermal dynamics of power transformers under diverse operational conditions, specifically oil-immersed ones, are examined. The efficacy of this model is confirmed through testing on a step-up transformer at Kureimat station in Egypt, with specifications including three-phase, 50 Hz, 16.5/240 KV, nine taps, and cooling type (ONAN/ONAF1/ONAF2).


  • Open Access

    Parameters Identification of the Fractional-Order Permanent Magnet Synchronous Motor Models Using Chaotic Ensemble Particle Swarm Optimizer

    by Dalia Yousri, Magdy B. Eteiba, Ahmed F. Zobaa, Dalia Allam

    In this paper, novel variants for the Ensemble Particle Swarm Optimizer (EPSO) are proposed where ten chaos maps are merged to enhance the EPSO’s performance by adaptively tuning its main parameters. The proposed Chaotic Ensemble Particle Swarm Optimizer variants (C.EPSO) are examined with complex nonlinear systems concerning equal order and variable-order fractional models of Permanent Magnet Synchronous Motor (PMSM). The proposed variants’ results are compared to that of its original version to recommend the most suitable variant for this non-linear optimization problem. A comparison between the introduced variants and the previously published algorithms proves the developed technique’s efficiency for further validation. The results emerge that the Chaotic Ensemble Particle Swarm variants with the Gauss/mouse map is the most proper variant for estimating the parameters of equal order and variable-order fractional PMSM models, as it achieves better accuracy, higher consistency, and faster convergence speed, it may lead to controlling the motor’s unwanted chaotic performance and protect it from ravage.


  • Fractional chaos maps with flower pollination algorithm for chaotic systems’ parameters identification

    by Dalia Yousri, Dalia Allam, Thanikanti Sudhakar Babu, Amr M. AbdelAty, Ahmed G. Radwan, Vigna. K. Ramachandaramurthy, M. B. Eteiba


  • Reply on “Reply to comment on Important notes on parameter estimation of solar photovoltaic cell”, by Gnetchejo et al. [Energy Conversion and Management, https://doi.org/10.1016/ j.enconman.2019.111870]

    by Dalia Yousri, Mohamed Abd Elaziz, Manel Merchaoui, K.P.S. Rana, Thanikanti Sudhakar Babu, Diego Oliva, Prasanth Ram, N. Rajasekar, D.F. Alama, M.B. Eteiba, et al.


  • Open Access

    Fractional Chaos Maps with Flower Pollination Algorithm for Partial Shading Mitigation of Photovoltaic Systems

    by Dalia Yousri, Thanikanti Sudhakar Babu, Dalia Allam, Vigna. K. Ramachandaramurthy, Eman Beshr, Magdy. B. Eteiba

    Solar Photovoltaic (PV) systems have become prominent and have attained the attention of energy engineers, governments and researchers. To achieve the maximum benefit from the PV system in spite of its nonlinear characteristic and environmental conditions, finding a robust maximum power point tracking method is essential. Over two decades, various researchers proposed numerous MPPT methods, but they failed to evaluate their methods on consistency, reliability, and robustness over several numbers of runs. Most of the researchers examined one configuration and they did not to consider the dynamic change in the irradiation conditions. Therefore, in this manuscript, the authors introduced a novel optimization technique Fractional chaotic Flower Pollination Algorithm (FC-FPA), by merging fractional chaos maps with flower pollination algorithm (FPA). The proposed technique, help FPA in extracting the Global Maximum Power Point (GMPP) under different partial shading patterns including with different PV array configurations. The proposed FC-FPA technique is tested and evaluated over 5 different patterns of partial shading conditions. The first three patterns are tested over 4S configuration made with Shell S36 PV module. The other two patterns are applied to the 4S2P configuration of Shell SM55 PV panels. The performance of the proposed variant is investigated by tracking the GMPP for abruptly changing shade pattern. Exclusive statistical analysis is performed over several numbers of runs. Comparison with perturb and observe MPPT technique is established. These results confirm that, the proposed method shows fast convergence, zero oscillation and rapid response for the dynamic change in irradiation with consistent behavior.


  • Open Access

    A New Hybrid Technique for Minimizing Power Losses in a Distribution System by Optimal Sizing and Siting of Distributed Generators with Network Reconfiguration

    by Mirna Fouad Abd El-Salam, Eman Beshr, Magdy B. Eteiba

    Transformations are taking place within the distribution systems to cope with the congestions and reliability concerns. This paper presents a new technique to efficiently minimize power losses within the distribution system by optimally sizing and placing distributed generators (DGs) while considering network reconfiguration. The proposed technique is a hybridization of two metaheuristic-based algorithms: Grey Wolf Optimizer (GWO) and Particle Swarm Optimizer (PSO), which solve the network reconfiguration problem by optimally installing different DG types (conventional and renewable-based). Case studies carried out showed the proposed hybrid technique outperformed each algorithm operating individually regarding both voltage profile and reduction in system losses. Case studies are carried to measure and compare the performance of the proposed technique on three different works: IEEE 33-bus, IEEE 69-bus radial distribution system, and an actual 78-bus distribution system located at Cairo, Egypt. The integration of renewable energy with the distribution network, such as photovoltaic (PV) arrays, is recommended since Cairo enjoys an excellent actual record of irradiance according to the PV map of Egypt.