Mahmut Sami Yazici
Mahmut Sami Yazici has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Chengkuo Lee
Department of Electrical and Computer Engineering National University of Singapore Singapore
5 shared publications - Bowei Dong
Department of Materials, University of Oxford, Oxford, UK
2 shared publications Dihan Hasan
2 shared publications- Qiongfeng Shi
Southeast University
2 shared publications - Ahmet Murat Yağci
GAZİ ÜNİVERSİTESİ, FEN BİLİMLERİ ENSTİTÜSÜ
1 shared publication Ali Ilker Isik
Aselsan Inc., Ankara, Trkiye
1 shared publication
Latest Publications
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. PP (2771957X) , 1-4
Filled-Waveguide-Based Extraction and Package-Level Validation of Underfill Loss Tangent for mm-Wave Flip-Chip Applications
Accurate characterization of underfill dielectric properties is critical for millimeter-wave (mm-wave) flip-chip packaging, as dielectric loss can significantly degrade high-frequency performance. In this letter, the frequency-dependent electrical permittivity and loss tangent of an epoxy-based underfill are extracted via transmission/reflection method using a WR-28 filled waveguide. Then, the extracted material properties are directly incorporated into a full-wave FEM model of a flip-chip packaged transmission structure without any fitting or tuning parameters and confirmed with measurements. To validate the approach at the package level, custom-designed flip-chip packaged substrate and dedicated thru–reflect–line (TRL) calibration kits are fabricated, enabling accurate S-parameter measurements from 10 to 40 GHz. Excellent agreement between simulated and measured results, both with and without underfill, confirms the accuracy of the proposed characterization method and highlights the dominant impact of underfill dielectric loss on mm-wave package performance.
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. PP (2771957X) , 1-4
Filled-Waveguide-Based Extraction and Package-Level Validation of Underfill Loss Tangent for mm-Wave Flip-Chip Applications
Accurate characterization of underfill dielectric properties is critical for millimeter-wave (mm-wave) flip-chip packaging, as dielectric loss can significantly degrade high-frequency performance. In this letter, the frequency-dependent electrical permittivity and loss tangent of an epoxy-based underfill are extracted via transmission/reflection method using a WR-28 filled waveguide. Then, the extracted material properties are directly incorporated into a full-wave FEM model of a flip-chip packaged transmission structure without any fitting or tuning parameters and confirmed with measurements. To validate the approach at the package level, custom-designed flip-chip packaged substrate and dedicated thru–reflect–line (TRL) calibration kits are fabricated, enabling accurate S-parameter measurements from 10 to 40 GHz. Excellent agreement between simulated and measured results, both with and without underfill, confirms the accuracy of the proposed characterization method and highlights the dominant impact of underfill dielectric loss on mm-wave package performance.
- 1 October 2020
- Published by Optica Publishing Group in Optics Letters
- Vol. 45 (19) , 5620-5623
Multifunctional mid-infrared photonic switch using a MEMS-based tunable waveguide coupler
We demonstrate a multifunctional photonic switch on silicon-on-insulator platform operating at the mid-infrared wavelength range (3.85–4.05 µm) using suspended waveguides with sub-wavelength cladding and a micro-electro-mechanical systems (MEMS) tunable waveguide coupler. Leveraging the flip-chip bonding technology, a top wafer acting as the electrode is assembled above the silicon-on-insular wafer to enable the electrostatic actuation. Experimental characterizations for the functions of the proposed device include (1) an optical attenuator with 25 dB depth using DC voltage actuation, (2) a 1 × 2 optical switch with response time of 8.9 µs and − 3 d B bandwidth up to 127 kHz using AC voltage actuation, and (3) an on-chip integrated light chopper with the comparable performance of a commercial rotating disc light chopper.
- 1 October 2020
- Published by Optica Publishing Group in Optics Letters
- Vol. 45 (19) , 5620-5623
Multifunctional mid-infrared photonic switch using a MEMS-based tunable waveguide coupler
We demonstrate a multifunctional photonic switch on silicon-on-insulator platform operating at the mid-infrared wavelength range (3.85–4.05 µm) using suspended waveguides with sub-wavelength cladding and a micro-electro-mechanical systems (MEMS) tunable waveguide coupler. Leveraging the flip-chip bonding technology, a top wafer acting as the electrode is assembled above the silicon-on-insular wafer to enable the electrostatic actuation. Experimental characterizations for the functions of the proposed device include (1) an optical attenuator with 25 dB depth using DC voltage actuation, (2) a 1 × 2 optical switch with response time of 8.9 µs and − 3 d B bandwidth up to 127 kHz using AC voltage actuation, and (3) an on-chip integrated light chopper with the comparable performance of a commercial rotating disc light chopper.
- 3 April 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (8) , 11524-11537
Integration of MEMS IR detectors with MIR waveguides for sensing applications
Waveguides have been utilized for label-free and miniaturized mid-infrared gas sensors that operate on the evanescent field absorption principle. For integrated systems, photodetectors based on the photocarrier generation principle are previously integrated with waveguides. However, due to the thermal excitation of carriers at room temperature, they suffer from large dark currents and noise in the long-wavelength region. In this paper, we introduce the integration of a MEMS-based broadband infrared thermopile sensor with mid-infrared waveguides via flip-chip bonding technology and demonstrate a proof-of-concept gas (N2O) sensor working at 3.9 µm. A photonic device with input and output grating couplers designed at 3.72 µm was fabricated on a silicon-on-insulator (SOI) platform and integrated with a bare thermopile chip on its output side via flip-chip bonding in order to realize an integrated photonic platform for a myriad range of sensing applications. A responsivity of 69 mV/W was measured at 3.72 µm for an 11 mm waveguide. A second device designed at 3.9 µm has a 1800 ppm resolution for N2O sensing.
- 3 April 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (8) , 11524-11537
Integration of MEMS IR detectors with MIR waveguides for sensing applications
Waveguides have been utilized for label-free and miniaturized mid-infrared gas sensors that operate on the evanescent field absorption principle. For integrated systems, photodetectors based on the photocarrier generation principle are previously integrated with waveguides. However, due to the thermal excitation of carriers at room temperature, they suffer from large dark currents and noise in the long-wavelength region. In this paper, we introduce the integration of a MEMS-based broadband infrared thermopile sensor with mid-infrared waveguides via flip-chip bonding technology and demonstrate a proof-of-concept gas (N2O) sensor working at 3.9 µm. A photonic device with input and output grating couplers designed at 3.72 µm was fabricated on a silicon-on-insulator (SOI) platform and integrated with a bare thermopile chip on its output side via flip-chip bonding in order to realize an integrated photonic platform for a myriad range of sensing applications. A responsivity of 69 mV/W was measured at 3.72 µm for an 11 mm waveguide. A second device designed at 3.9 µm has a 1800 ppm resolution for N2O sensing.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Feasibility Study of High-Voltage Ion Mobility for Gas Identification Based on Triboelectric Power Source
We report a type of miniaturized and self-powered gas identification platform for wearable applications that works on the principle of ion mobility transients offering a high degree of selectivity for a variety of gas species. The self-powered operation of the sensor exploited the high voltage output from a systematically designed triboelectric nanogenerator (TENG). The multi-layer TENG platform provided a voltage of the order kV just by finger triggering, which was further leveraged in a special type of electrode (tip-plate) configuration making it possible to obtain plasma discharge of a wide range of gas molecules at atmospheric condition. By adding an additional collector plate at a specific distance within the device configuration, we successfully demonstrated different transient characteristics for different gas molecules which can be directly attributed to their differences in terms of ion-mobility. Our analysis clearly indicated unique and repeatable discharge characteristics at various mixture conditions and atmospheric pressure. We further employ machine learning to classify different gases based on the transient dynamics observed at the collector plate. High classification accuracy was obtained for four different gases even using a shallow network that indicated the potential of the proposed platform as a low-power, small foot-print wearable Internet of Things (IoTs) device for gas leak detection. It is envisioned that the proposed platform can enable early detection of gas species by incorporating the transient development of the multitude of time-domain finger-prints into the machine learning model.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Feasibility Study of High-Voltage Ion Mobility for Gas Identification Based on Triboelectric Power Source
We report a type of miniaturized and self-powered gas identification platform for wearable applications that works on the principle of ion mobility transients offering a high degree of selectivity for a variety of gas species. The self-powered operation of the sensor exploited the high voltage output from a systematically designed triboelectric nanogenerator (TENG). The multi-layer TENG platform provided a voltage of the order kV just by finger triggering, which was further leveraged in a special type of electrode (tip-plate) configuration making it possible to obtain plasma discharge of a wide range of gas molecules at atmospheric condition. By adding an additional collector plate at a specific distance within the device configuration, we successfully demonstrated different transient characteristics for different gas molecules which can be directly attributed to their differences in terms of ion-mobility. Our analysis clearly indicated unique and repeatable discharge characteristics at various mixture conditions and atmospheric pressure. We further employ machine learning to classify different gases based on the transient dynamics observed at the collector plate. High classification accuracy was obtained for four different gases even using a shallow network that indicated the potential of the proposed platform as a low-power, small foot-print wearable Internet of Things (IoTs) device for gas leak detection. It is envisioned that the proposed platform can enable early detection of gas species by incorporating the transient development of the multitude of time-domain finger-prints into the machine learning model.
- Open Access
Development of a Highly Sensitive Humidity Sensor Based on a Piezoelectric Micromachined Ultrasonic Transducer Array Functionalized with Graphene Oxide Thin Film
A novel relative humidity sensor that is based on a linear piezoelectric micromachined ultrasonic transducer (pMUT) array was proposed and microfabricated for high sensitivity, fast response, and good stability. The humidity-sensitive graphene oxide (GO) film was deposited on the pMUT array with a facile drop-casting method and characterized by scanning electron microscope (SEM), atomic force microscope (AFM), and Fourier transform infrared spectrum (FTIR). With the humidity level ranging from 10% to 90% RH, the sensor exhibited a high sensitivity of 719 Hz/% RH and an extremely high relative sensitivity of 271.1 ppm/% RH. The humidity-sensing results also showed good short-term repeatability and long-term stability, fast response and recovery, and low hysteresis. Moreover, the temperature coefficient of frequency (TCF) of the present humidity sensor was investigated and it could be easily compensated owing to the pMUT array structure design. This work confirmed that the GO functionalized pMUT is an excellent candidate in humidity detection and it may enable many potential applications, such as ultrasensitive mass detection and simultaneous detection of multiple parameters.
Open AccessDevelopment of a Highly Sensitive Humidity Sensor Based on a Piezoelectric Micromachined Ultrasonic Transducer Array Functionalized with Graphene Oxide Thin Film
A novel relative humidity sensor that is based on a linear piezoelectric micromachined ultrasonic transducer (pMUT) array was proposed and microfabricated for high sensitivity, fast response, and good stability. The humidity-sensitive graphene oxide (GO) film was deposited on the pMUT array with a facile drop-casting method and characterized by scanning electron microscope (SEM), atomic force microscope (AFM), and Fourier transform infrared spectrum (FTIR). With the humidity level ranging from 10% to 90% RH, the sensor exhibited a high sensitivity of 719 Hz/% RH and an extremely high relative sensitivity of 271.1 ppm/% RH. The humidity-sensing results also showed good short-term repeatability and long-term stability, fast response and recovery, and low hysteresis. Moreover, the temperature coefficient of frequency (TCF) of the present humidity sensor was investigated and it could be easily compensated owing to the pMUT array structure design. This work confirmed that the GO functionalized pMUT is an excellent candidate in humidity detection and it may enable many potential applications, such as ultrasensitive mass detection and simultaneous detection of multiple parameters.
- 30 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (3) , 860-867
Investigation of Broadband Characteristics of Multi-Frequency Piezoelectric Micromachined Ultrasonic Transducer (MF-pMUT)
Multi-frequency ultrasonic transducers are highly promising devices in biomedical applications for providing both good imaging resolution and large detection depth. However, most conventional multi-frequency ultrasonic transducers are designed through integrating multiple single-frequency transducers, with complicated fabrication process, imperfect beam profiles and limited bandwidths. In this paper, a single-element multi-frequency piezoelectric micromachined ultrasonic transducer (MF-pMUT) is proposed and investigated in terms of broadband property. Three rectangular-diaphragm MF-pMUTs with different length-to-width aspect ratios are fabricated with the microelectromechanical system (MEMS) technology and characterized both in air and underwater. All MF-pMUT samples exhibit at least two broad bands. After optimization of the aspect ratio, two smooth bands with comparable sound pressure level are achieved, providing -6 dB bandwidths of 112% /38% and corresponding central frequencies of 0.615 MHz /1.63 MHz. Benefited from such broadened multi-frequency property and simple structure design, the proposed MF-pMUT shows a great potential in ultrasonic detection, diagnosis and imaging applications as well as wireless acoustic energy transmission.
- 30 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (3) , 860-867
Investigation of Broadband Characteristics of Multi-Frequency Piezoelectric Micromachined Ultrasonic Transducer (MF-pMUT)
Multi-frequency ultrasonic transducers are highly promising devices in biomedical applications for providing both good imaging resolution and large detection depth. However, most conventional multi-frequency ultrasonic transducers are designed through integrating multiple single-frequency transducers, with complicated fabrication process, imperfect beam profiles and limited bandwidths. In this paper, a single-element multi-frequency piezoelectric micromachined ultrasonic transducer (MF-pMUT) is proposed and investigated in terms of broadband property. Three rectangular-diaphragm MF-pMUTs with different length-to-width aspect ratios are fabricated with the microelectromechanical system (MEMS) technology and characterized both in air and underwater. All MF-pMUT samples exhibit at least two broad bands. After optimization of the aspect ratio, two smooth bands with comparable sound pressure level are achieved, providing -6 dB bandwidths of 112% /38% and corresponding central frequencies of 0.615 MHz /1.63 MHz. Benefited from such broadened multi-frequency property and simple structure design, the proposed MF-pMUT shows a great potential in ultrasonic detection, diagnosis and imaging applications as well as wireless acoustic energy transmission.