M Mojžiš
Research Subjects
Research Interests
M Mojžiš has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Pavel Kejzlar
Technical University of Liberec
1 shared publication - Peter Bella
ŽP Research and Development Centre
1 shared publication - Peter Burik
ZP Research and Development Centre, Ltd., Železiarne Podbrezová, a. s., Kolkáreň 35, 976 81 Podbrezová, Slovakia
1 shared publication - Ľudovít Parilák
ŽP Research and Development Centre, Ltd., Podbrezova, Slovakia, EU
1 shared publication
Latest Publications
- Open Access
- 10 December 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 461 (1) , 012010
Evolution of deformation texture in cold drawing of steel tubes using EBSD analysis and FEM simulation
Cold drawing of steel tubes is the manufacturing process characterized by anisotropic material flow during drawing. In this paper, the micro structural of the E235 steel tube after recrystallization annealing and cold drawing were characterized by optical microscopy and EBSD (Electron BackScatter Diffraction) analysis performed on a scanning electron microscope. The input feedstock after recrystallization annealing with dimensions of ø 25.0 mm × 1.5 mm (O.D × W.T.) was cold drawn in two drawing passes with fixed plug to the final dimensions of ø 18.0 mm × 0.9 mm (O.D × W.T.). The development of crystallographic texture (both qualitative and quantitative) was analysed on a longitudinal section of the tube. The stress-strain state in the tube material during drawing was calculated by FEM (Final Element Method) software and the development of the texture depending on the stress-strain state in three different directions using cylindrical coordinates with respect to the drawing direction was evaluated. We have investigated the ratio of individual crystallographic planes depending on stress state during drawn tube. The main objective was to define the development of crystallographic grain orientation from stress-strain state during cold drawn tube.
- 10 December 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 461 (1) , 012010
Open AccessEvolution of deformation texture in cold drawing of steel tubes using EBSD analysis and FEM simulation
Cold drawing of steel tubes is the manufacturing process characterized by anisotropic material flow during drawing. In this paper, the micro structural of the E235 steel tube after recrystallization annealing and cold drawing were characterized by optical microscopy and EBSD (Electron BackScatter Diffraction) analysis performed on a scanning electron microscope. The input feedstock after recrystallization annealing with dimensions of ø 25.0 mm × 1.5 mm (O.D × W.T.) was cold drawn in two drawing passes with fixed plug to the final dimensions of ø 18.0 mm × 0.9 mm (O.D × W.T.). The development of crystallographic texture (both qualitative and quantitative) was analysed on a longitudinal section of the tube. The stress-strain state in the tube material during drawing was calculated by FEM (Final Element Method) software and the development of the texture depending on the stress-strain state in three different directions using cylindrical coordinates with respect to the drawing direction was evaluated. We have investigated the ratio of individual crystallographic planes depending on stress state during drawn tube. The main objective was to define the development of crystallographic grain orientation from stress-strain state during cold drawn tube.