Cassio T. Faria
Research Subjects
Cassio T. Faria has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Fabien Chauvicourt
Engineering Consulting Services RTD, Siemens Industry Software NV, Leuven, Belgium
2 shared publications - Kristian Hengster-Movric
Department of Control Engineering, Czech Technical University, Prague, Czech Republic
2 shared publications - Michael Sebek
Czech Technical University in Prague
2 shared publications - Wim Desmet
Department of Mechanical Engineering, KU Leuven Celestijnenlaan 300, B-3001 Heverlee (Leuven), Belgium
2 shared publications - Xueji Zhang
Atlas Copco Airpower NV, Boomsesteenweg, Antwerp, Belgium
2 shared publications - André De Oliveira
Siemens Digital Industries
1 shared publication
Latest Publications
- 1 January 2019
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 114, 571-578
Sensor fusion and rotational motion reconstruction via nonlinear state-observers
- 1 January 2019
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 114, 571-578
Sensor fusion and rotational motion reconstruction via nonlinear state-observers
- 15 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 34 (2) , 613-619
Transversally Asymmetric Stiffness of Laminated Stator Core: A Solution for Noise Mitigation of Electric Machines
This paper provides electric machine designers with a stator core lamination attachment method that improves the noise and vibration performances of the machine by reducing resonance effects of critical modes. The proposed method uses welding or gluing technologies to attach the laminations together. The connections are distributed such that the core stiffness is axially, and more importantly transversally asymmetric. The novel technique leads to dampening of targeted modes and is validated experimentally. The results show great modal damping improvements up to 7 times the initial value from regular cores and vibration levels reduced by 9 dB.
- 15 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 34 (2) , 613-619
Transversally Asymmetric Stiffness of Laminated Stator Core: A Solution for Noise Mitigation of Electric Machines
This paper provides electric machine designers with a stator core lamination attachment method that improves the noise and vibration performances of the machine by reducing resonance effects of critical modes. The proposed method uses welding or gluing technologies to attach the laminations together. The connections are distributed such that the core stiffness is axially, and more importantly transversally asymmetric. The novel technique leads to dampening of targeted modes and is validated experimentally. The results show great modal damping improvements up to 7 times the initial value from regular cores and vibration levels reduced by 9 dB.
- Open Access
- 1 August 2018
- Published by Editora Edgard Blucher, Ltda.
- Vol. 5 (1) , 736-759
CHALLENGES OF NVH TESTING AND ANALYSIS OF ELECTRIC MOTORS
One of the major trends in mobility nowadays is the usage of electric motors in vehicles, encouraged by governments worldwide in search to decrease pollutant emissions and reduce dependence on fossil fuels. This has introduced a whole new challenge for the noise and vibration attributes on motor design, since although there is no combustion phenomena and the gearbox is greatly reduced or non-existent in electric vehicles, new acoustical phenomena happens, such as structural vibrational modes of the stator, or power electronics controller frequency operation. Usually the noise is at higher frequencies than what is experienced on internal combustion engines, which sometimes can lead to a worse acoustic perception of the product. This paper present some of the main noise sources of common electric inner-rotor motor design, and elaborate on typical challenges and particularities of its experimental NVH (Noise, Vibration and Harshness) test and analysis, in comparison to what is common practice on ICE (Internal Combustion Engine) testing and instrumentation.
- 1 August 2018
- Published by Editora Edgard Blucher, Ltda.
- Vol. 5 (1) , 736-759
Open AccessCHALLENGES OF NVH TESTING AND ANALYSIS OF ELECTRIC MOTORS
One of the major trends in mobility nowadays is the usage of electric motors in vehicles, encouraged by governments worldwide in search to decrease pollutant emissions and reduce dependence on fossil fuels. This has introduced a whole new challenge for the noise and vibration attributes on motor design, since although there is no combustion phenomena and the gearbox is greatly reduced or non-existent in electric vehicles, new acoustical phenomena happens, such as structural vibrational modes of the stator, or power electronics controller frequency operation. Usually the noise is at higher frequencies than what is experienced on internal combustion engines, which sometimes can lead to a worse acoustic perception of the product. This paper present some of the main noise sources of common electric inner-rotor motor design, and elaborate on typical challenges and particularities of its experimental NVH (Noise, Vibration and Harshness) test and analysis, in comparison to what is common practice on ICE (Internal Combustion Engine) testing and instrumentation.
- 22 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 27 (1) , 1-13
Distributed Observer and Controller Design for Spatially Interconnected Systems
This paper tackles networked distributed observer and controller design problem over directed graph topology for spatially interconnected systems. Traditional centralized design methods suffer from a lack of adaptability to graph variations incurred by network reconfiguration, communication failures, and redundant sensors integration. In this paper, to handle the foregoing limitations imposed by centralized design, state observers are designed in a distributed manner facilitated by pinning control precepts. On the one hand, this novel approach adds fault tolerance with respect to communication link failures. On the other hand, the proposed approach brings flexibility of integrating additional sensors into the network. In addition, this approach affords a reduction of computational cost. A sufficient condition to guarantee stability of the closed-loop system is derived. The controllers, though in the end implemented in a distributed way, are designed in a centralized framework, where linear-quadratic-regulator theory is adopted to handle the fact that separation principle fails to hold in the networked observer and controller design. Numerical simulation results of a piezoelectric actuated smart flexible system are presented, and the effectiveness of the proposed design is thereby verified.
- 22 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 27 (1) , 1-13
Distributed Observer and Controller Design for Spatially Interconnected Systems
This paper tackles networked distributed observer and controller design problem over directed graph topology for spatially interconnected systems. Traditional centralized design methods suffer from a lack of adaptability to graph variations incurred by network reconfiguration, communication failures, and redundant sensors integration. In this paper, to handle the foregoing limitations imposed by centralized design, state observers are designed in a distributed manner facilitated by pinning control precepts. On the one hand, this novel approach adds fault tolerance with respect to communication link failures. On the other hand, the proposed approach brings flexibility of integrating additional sensors into the network. In addition, this approach affords a reduction of computational cost. A sufficient condition to guarantee stability of the closed-loop system is derived. The controllers, though in the end implemented in a distributed way, are designed in a centralized framework, where linear-quadratic-regulator theory is adopted to handle the fact that separation principle fails to hold in the networked observer and controller design. Numerical simulation results of a piezoelectric actuated smart flexible system are presented, and the effectiveness of the proposed design is thereby verified.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 674-679
Consensus-based distributed sensor fusion over a network
This paper studies the distributed filtering of noisy measurements of one scalar quantity. The considered network is composed of two sets of nodes: sensing nodes which perform the measuring task and non-sensing nodes which mediate between the sensing nodes. Inspired by Bayesian sensor fusion, three consensus-based algorithms are proposed. In the algorithms, graph edge weights in effect are determined based on variances of measurements of all the sensors. Evolution dynamics of the expected values and covariances of the state estimates throughout the network is analyzed. Numerical simulations are given to examine the fusion performance of the proposed scheme. The results are fairly consistent with the analytical solution regarding the statistical properties of the steady-state state estimates in the network.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 674-679
Consensus-based distributed sensor fusion over a network
This paper studies the distributed filtering of noisy measurements of one scalar quantity. The considered network is composed of two sets of nodes: sensing nodes which perform the measuring task and non-sensing nodes which mediate between the sensing nodes. Inspired by Bayesian sensor fusion, three consensus-based algorithms are proposed. In the algorithms, graph edge weights in effect are determined based on variances of measurements of all the sensors. Evolution dynamics of the expected values and covariances of the state estimates throughout the network is analyzed. Numerical simulations are given to examine the fusion performance of the proposed scheme. The results are fairly consistent with the analytical solution regarding the statistical properties of the steady-state state estimates in the network.
- 28 March 2017
- Published by Springer Nature
- p. 127-135
Modeling and Nonlinear Parameter Identification of an Electric-Power Steering System
- 28 March 2017
- Published by Springer Nature
- p. 127-135
Modeling and Nonlinear Parameter Identification of an Electric-Power Steering System
- Open Access
- 26 June 2015
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 7 (2) , 179-186
Noise emissions on switched reluctance motors: evaluation of different structural models
The mass production of electric vehicles can pressure some specific natural resources that are needed for the production of the motors utilized in such vehicles. In those lines an alternative to the use of rare-earth magnets in the propulsion system is to substitute permanent-magnet synchronous machines (PMSM) by switched reluctance motors (SRM). One of the main drawbacks of SRMs is the torque ripple and consequently the noise and vibration that it can cause in the driveline. The further development of this motor technology needs to properly understand and address the mechanical vibrations caused by the magnetic forces in the stator. The goal of this paper is to investigate the effects of increased complexity of structural modelling in capturing the physical phenomena that governs this system. By comparing the modal parameters of structures modelled by 2D analytical techniques, finite elements (FE) with isotropic material and FE with orthotropic properties, it is possible to discuss the limitations and applicability of each technique.
- 26 June 2015
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 7 (2) , 179-186
Open AccessNoise emissions on switched reluctance motors: evaluation of different structural models
The mass production of electric vehicles can pressure some specific natural resources that are needed for the production of the motors utilized in such vehicles. In those lines an alternative to the use of rare-earth magnets in the propulsion system is to substitute permanent-magnet synchronous machines (PMSM) by switched reluctance motors (SRM). One of the main drawbacks of SRMs is the torque ripple and consequently the noise and vibration that it can cause in the driveline. The further development of this motor technology needs to properly understand and address the mechanical vibrations caused by the magnetic forces in the stator. The goal of this paper is to investigate the effects of increased complexity of structural modelling in capturing the physical phenomena that governs this system. By comparing the modal parameters of structures modelled by 2D analytical techniques, finite elements (FE) with isotropic material and FE with orthotropic properties, it is possible to discuss the limitations and applicability of each technique.