Harrison Sejoon Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Harrison Sejoon Kim has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- Jiyoung Kim
The University of Texas at Dallas
15 shared publications - Si Joon Kim
Kangwon National University
14 shared publications - Yong Chan Jung
Department of Materials Science and Engineering, The University of Texas at Dallas, 800 West Campbell Road, Richardson, Texas 75080, United States
9 shared publications - Akshay Sahota
Department of Electrical Engineering, The University of Texas at Dallas 2 , 800 West Campbell Road, Richardson, Texas 75080, USA
5 shared publications Byung Keun Hwang
DuPont 7 , 3700 James Savage Rd., 1382 Building, Midland, Michigan 48640
5 shared publications- Jaidah Mohan
Department of Materials Science and Engineering, The University of Texas at Dallas 3 , 800 West Campbell Road, Richardson, Texas 75080, USA
5 shared publications
Latest Publications
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (10)
Thermal budget study to simultaneously achieve low-temperature (<400 °C) process and high endurance of ferroelectric Hf0.5Zr0.5O2 thin films
This work comprehensively investigates the thermal budget required to simultaneously achieve low-temperature process conditions and high endurance in atomic layer deposited ferroelectric Hf0.5Zr0.5O2 (HZO) thin films. Because a certain level of thermal budget is required to achieve ferroelectricity in 10 nm HZO thin films, the crystallization temperature can be lowered below 400 °C by simply increasing the annealing time. In addition, the analysis of the crystallization behavior of HZO thin films based on the Johnson–Mehl–Avrami–Kolmogorov model revealed that longer annealing times are required to lower the annealing temperature for HZO crystallization due to the limitation of the crystallization rate. Consequently, low-temperature (<400 °C) ferroelectric HZO thin films with large remanent polarization along with improved leakage behavior and endurance were realized. These results not only facilitate the back-end-of-line integration of HZO thin films but also demonstrate the feasibility of in situ HZO crystallization by thermal budget for subsequent interconnect formation, simplifying the overall process and saving costs by eliminating a dedicated annealing process.
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (10)
Thermal budget study to simultaneously achieve low-temperature (<400 °C) process and high endurance of ferroelectric Hf0.5Zr0.5O2 thin films
This work comprehensively investigates the thermal budget required to simultaneously achieve low-temperature process conditions and high endurance in atomic layer deposited ferroelectric Hf0.5Zr0.5O2 (HZO) thin films. Because a certain level of thermal budget is required to achieve ferroelectricity in 10 nm HZO thin films, the crystallization temperature can be lowered below 400 °C by simply increasing the annealing time. In addition, the analysis of the crystallization behavior of HZO thin films based on the Johnson–Mehl–Avrami–Kolmogorov model revealed that longer annealing times are required to lower the annealing temperature for HZO crystallization due to the limitation of the crystallization rate. Consequently, low-temperature (<400 °C) ferroelectric HZO thin films with large remanent polarization along with improved leakage behavior and endurance were realized. These results not only facilitate the back-end-of-line integration of HZO thin films but also demonstrate the feasibility of in situ HZO crystallization by thermal budget for subsequent interconnect formation, simplifying the overall process and saving costs by eliminating a dedicated annealing process.
- 11 February 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (2) , 022406
High wet-etch resistance SiO2 films deposited by plasma-enhanced atomic layer deposition with 1,1,1-tris(dimethylamino)disilane
A novel precursor, 1,1,1-tris(dimethylamino)disilane {TADS, [(H3C)2N]3Si2H3}, is used to deposit silicon dioxide (SiO2) films in a temperature range of 115–480 °C by thermal atomic layer deposition (tALD) and plasma-enhanced atomic layer deposition (PEALD) techniques. Compared to tris(dimethylamino)silane (TDMAS), the additional Si-Si bond in TADS is expected to enhance the reactivity of the molecule due to the polarization of the bond. In the tALD process, TADS gives a growth rate of 0.06 nm/cycle, which is approximately 20% higher than that of TDMAS, and an excellent conformality (>95% step coverage) in high aspect ratio nanotrenches (6:1). In the case of the PEALD process, TADS leads to not only a higher or at least comparable growth rates (0.11 nm/cycle), but also a higher bulk film density (∼2.38 g/cm3). As a result, the PEALD SiO2 films of TADS show a wet-etch rate down to 1.6 nm/min in 200:1 HF, which is comparable to that of the thermal oxide. Analyzed with Fourier-Transform Infrared (FTIR), the SiO2 films contain predominant Si−O bonds and a low level of Si−H and O−H bonds, consistent with the observed high wet-etch resistance. Furthermore, the PEALD SiO2 films deposited at 310 °C have at least 75% step coverage in high aspect ratio nanotrenches, suggesting that TADS is applicable for forming high-quality SiO2 films on both planar and patterned surfaces.
- 11 February 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (2) , 022406
High wet-etch resistance SiO2 films deposited by plasma-enhanced atomic layer deposition with 1,1,1-tris(dimethylamino)disilane
A novel precursor, 1,1,1-tris(dimethylamino)disilane {TADS, [(H3C)2N]3Si2H3}, is used to deposit silicon dioxide (SiO2) films in a temperature range of 115–480 °C by thermal atomic layer deposition (tALD) and plasma-enhanced atomic layer deposition (PEALD) techniques. Compared to tris(dimethylamino)silane (TDMAS), the additional Si-Si bond in TADS is expected to enhance the reactivity of the molecule due to the polarization of the bond. In the tALD process, TADS gives a growth rate of 0.06 nm/cycle, which is approximately 20% higher than that of TDMAS, and an excellent conformality (>95% step coverage) in high aspect ratio nanotrenches (6:1). In the case of the PEALD process, TADS leads to not only a higher or at least comparable growth rates (0.11 nm/cycle), but also a higher bulk film density (∼2.38 g/cm3). As a result, the PEALD SiO2 films of TADS show a wet-etch rate down to 1.6 nm/min in 200:1 HF, which is comparable to that of the thermal oxide. Analyzed with Fourier-Transform Infrared (FTIR), the SiO2 films contain predominant Si−O bonds and a low level of Si−H and O−H bonds, consistent with the observed high wet-etch resistance. Furthermore, the PEALD SiO2 films deposited at 310 °C have at least 75% step coverage in high aspect ratio nanotrenches, suggesting that TADS is applicable for forming high-quality SiO2 films on both planar and patterned surfaces.
- 13 December 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 119 (24) , 242901
Low-thermal-budget (300 °C) ferroelectric TiN/Hf0.5Zr0.5O2/TiN capacitors realized using high-pressure annealing
In this Letter, a high-pressure annealing (HPA) process is proposed as a way to reduce the thermal budget of Hf0.5Zr0.5O2 (HZO) thin films with ferroelectric behaviors. The low-thermal-budget process is essential for integrating ferroelectric devices in the back-end-of-line to provide more functionalities and effective memory area. For the HZO film annealed at 300 °C using the HPA process, an orthorhombic phase responsible for ferroelectric behavior was formed with a decrease in film thickness, resulting in a remanent polarization (Pr) of ∼13 μC/cm2 (i.e., 2Pr of ∼26 μC/cm2). Meanwhile, when only the annealing time was increased at 300 °C without applying pressure, the HZO film did not crystallize and exhibited linear dielectric properties. Consequently, the HZO films (<10 nm) can be crystallized by applying pressure (15 atm) even at low temperatures of 300 °C, thereby obtaining ferroelectric properties.
- 13 December 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 119 (24) , 242901
Low-thermal-budget (300 °C) ferroelectric TiN/Hf0.5Zr0.5O2/TiN capacitors realized using high-pressure annealing
In this Letter, a high-pressure annealing (HPA) process is proposed as a way to reduce the thermal budget of Hf0.5Zr0.5O2 (HZO) thin films with ferroelectric behaviors. The low-thermal-budget process is essential for integrating ferroelectric devices in the back-end-of-line to provide more functionalities and effective memory area. For the HZO film annealed at 300 °C using the HPA process, an orthorhombic phase responsible for ferroelectric behavior was formed with a decrease in film thickness, resulting in a remanent polarization (Pr) of ∼13 μC/cm2 (i.e., 2Pr of ∼26 μC/cm2). Meanwhile, when only the annealing time was increased at 300 °C without applying pressure, the HZO film did not crystallize and exhibited linear dielectric properties. Consequently, the HZO films (<10 nm) can be crystallized by applying pressure (15 atm) even at low temperatures of 300 °C, thereby obtaining ferroelectric properties.
- 25 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (1) , 21-24
Highly Reliable Selection Behavior With Controlled Ag Doping of Nano-Polycrystalline ZnO Layer for 3D X-Point Framework
In this letter, a threshold switching (TS) selector with Ag doping-based nano-polycrystalline ZnO switching layer (SL) having (002) preferred orientation has been manifested, without incorporating an active Ag metal layer, using a facile co-sputtering deposition technique. The TS selectors with extremely controlled doping of ~0.14 at. % Ag concentration showed remarkable electroforming (EF)-free selection behavior such as gigantic selectivity (~10 11 ), extreme-low off -current (~10 fA), high on -current density (~1.6 MA/cm 2 ), ultra-steep switching slope (~0.8 mV/decade), satisfactory endurance (>10 6 ), fast switch- on speed (~38 ns) and relaxation speed (~64 ns), and high device yield (~90%). Furthermore, selector devices showed reproducible selection behavior with stable threshold voltage (V th ) having merely ~8% variances.
- 25 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (1) , 21-24
Highly Reliable Selection Behavior With Controlled Ag Doping of Nano-Polycrystalline ZnO Layer for 3D X-Point Framework
In this letter, a threshold switching (TS) selector with Ag doping-based nano-polycrystalline ZnO switching layer (SL) having (002) preferred orientation has been manifested, without incorporating an active Ag metal layer, using a facile co-sputtering deposition technique. The TS selectors with extremely controlled doping of ~0.14 at. % Ag concentration showed remarkable electroforming (EF)-free selection behavior such as gigantic selectivity (~10 11 ), extreme-low off -current (~10 fA), high on -current density (~1.6 MA/cm 2 ), ultra-steep switching slope (~0.8 mV/decade), satisfactory endurance (>10 6 ), fast switch- on speed (~38 ns) and relaxation speed (~64 ns), and high device yield (~90%). Furthermore, selector devices showed reproducible selection behavior with stable threshold voltage (V th ) having merely ~8% variances.
- Open Access
- 1 November 2021
- Published by AIP Publishing in AIP Advances
- Vol. 11 (11) , 115213
Nano-polycrystalline Ag-doped ZnO layer for steep-slope threshold switching selectors
In this work, a nano-polycrystalline Ag-doped ZnO-based threshold switching (TS) selector via a facile co-sputtering technique is investigated without using an Ag active metal layer. The effects of the Ag concentration with respect to OFF-state leakage current (Ioff) were studied, and the results demonstrate that by regulating the Ag doping concentration in the switching layer (SL), an electroforming-free switching with an Ion/Ioff ratio of ∼108 could be achieved, having an extremely low Ioff value of ∼10−13 A. Furthermore, cycling endurance can also be improved as the formation of a laterally thick and stable filament does not happen promptly with consequent measurements when there is a limited amount of Ag in the SL. The selector device performance enhancement is attributed to the doping-based polycrystalline structure that facilitates enhanced control on filament formation due to the restricted availability and anisotropic diffusion of Ag ions in the polycrystalline ZnO SL, thereby trimming down the overall stochasticity during metallic filament growth. The present study demonstrates that a doping-based polycrystalline SL structure can be implemented in a selector device to augment TS characteristics, i.e., device variances and cycling endurance for adoption in ultra-high density memory applications.
- 1 November 2021
- Published by AIP Publishing in AIP Advances
- Vol. 11 (11) , 115213
Open AccessNano-polycrystalline Ag-doped ZnO layer for steep-slope threshold switching selectors
In this work, a nano-polycrystalline Ag-doped ZnO-based threshold switching (TS) selector via a facile co-sputtering technique is investigated without using an Ag active metal layer. The effects of the Ag concentration with respect to OFF-state leakage current (Ioff) were studied, and the results demonstrate that by regulating the Ag doping concentration in the switching layer (SL), an electroforming-free switching with an Ion/Ioff ratio of ∼108 could be achieved, having an extremely low Ioff value of ∼10−13 A. Furthermore, cycling endurance can also be improved as the formation of a laterally thick and stable filament does not happen promptly with consequent measurements when there is a limited amount of Ag in the SL. The selector device performance enhancement is attributed to the doping-based polycrystalline structure that facilitates enhanced control on filament formation due to the restricted availability and anisotropic diffusion of Ag ions in the polycrystalline ZnO SL, thereby trimming down the overall stochasticity during metallic filament growth. The present study demonstrates that a doping-based polycrystalline SL structure can be implemented in a selector device to augment TS characteristics, i.e., device variances and cycling endurance for adoption in ultra-high density memory applications.
- Open Access
- 1 March 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (3) , 031111
Correlation between ferroelectricity and ferroelectric orthorhombic phase of HfxZr1−xO2 thin films using synchrotron x-ray analysis
The change in the interplanar spacing (d-spacing) including the ferroelectric orthorhombic (O) phase in the low-temperature fabricated HfxZr1−xO2 (HZO) films was studied using synchrotron grazing-incidence wide-angle x-ray scattering analysis. The 10-nm-thick HZO films were fabricated by thermal and plasma-enhanced atomic layer deposition (TH- and PE-ALD) methods using H2O gas and O2 plasma as oxidants, respectively, and a post-metallization annealing (PMA) was performed at 300–400 °C. The d-spacing of the mixture of (111)-, (101)-, and (111)-planes of O, tetragonal (T), and cubic (C) phases, respectively, for the TH- and PE-ALD HZO films increased up to 2.99 Å with an increase in PMA temperature, while the d-spacing estimated by conventional x-ray diffraction was 2.92 Å regardless of the PMA temperature. The remanent polarization (2Pr = Pr+ − Pr−) of the HZO films increased as the PMA temperature increased. It is clear that the 2Pr value satisfied a linear relationship as a function of the d-spacing of O(111)/T(101)/C(111) phases. Furthermore, the wake-up effect was found to depend on the ferroelectric O phase formation. The wake-up effect was significantly reduced in both the TH- and PE-ALD HZO films after the PMA at 400 °C due to the increase in the ferroelectric O phase formation. The leakage current density (J)–electric field properties of the PE-ALD HZO film with the lowest d-spacing were divided into three steps, such as low, middle, and large J values, in the wake-up (103 cycles), pristine (100 cycle), and fatigue (107 cycles) states, respectively. Therefore, an analysis of the ferroelectric O phase is very important for understanding the ferroelectricity including endurance.
- 1 March 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (3) , 031111
Open AccessCorrelation between ferroelectricity and ferroelectric orthorhombic phase of HfxZr1−xO2 thin films using synchrotron x-ray analysis
The change in the interplanar spacing (d-spacing) including the ferroelectric orthorhombic (O) phase in the low-temperature fabricated HfxZr1−xO2 (HZO) films was studied using synchrotron grazing-incidence wide-angle x-ray scattering analysis. The 10-nm-thick HZO films were fabricated by thermal and plasma-enhanced atomic layer deposition (TH- and PE-ALD) methods using H2O gas and O2 plasma as oxidants, respectively, and a post-metallization annealing (PMA) was performed at 300–400 °C. The d-spacing of the mixture of (111)-, (101)-, and (111)-planes of O, tetragonal (T), and cubic (C) phases, respectively, for the TH- and PE-ALD HZO films increased up to 2.99 Å with an increase in PMA temperature, while the d-spacing estimated by conventional x-ray diffraction was 2.92 Å regardless of the PMA temperature. The remanent polarization (2Pr = Pr+ − Pr−) of the HZO films increased as the PMA temperature increased. It is clear that the 2Pr value satisfied a linear relationship as a function of the d-spacing of O(111)/T(101)/C(111) phases. Furthermore, the wake-up effect was found to depend on the ferroelectric O phase formation. The wake-up effect was significantly reduced in both the TH- and PE-ALD HZO films after the PMA at 400 °C due to the increase in the ferroelectric O phase formation. The leakage current density (J)–electric field properties of the PE-ALD HZO film with the lowest d-spacing were divided into three steps, such as low, middle, and large J values, in the wake-up (103 cycles), pristine (100 cycle), and fatigue (107 cycles) states, respectively. Therefore, an analysis of the ferroelectric O phase is very important for understanding the ferroelectricity including endurance.
- 22 February 2021
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 4 (3) , 2558-2564
Plasma-Enhanced Atomic-Layer Deposition of Nanometer-Thick SiNx Films Using Trichlorodisilane for Etch-Resistant Coatings
- 22 February 2021
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 4 (3) , 2558-2564
Plasma-Enhanced Atomic-Layer Deposition of Nanometer-Thick SiNx Films Using Trichlorodisilane for Etch-Resistant Coatings
- 19 August 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 8 (37) , 13033-13039
High growth rate and high wet etch resistance silicon nitride grown by low temperature plasma enhanced atomic layer deposition with a novel silylamine precursor
Trisilylamine (TSA), an exemplary chlorine and carbon-free commercial silylamine precursor, is well-known to induce improvements in the process and properties of silicon nitride (SiNx) thin films grown using atomic layer deposition (ALD). Herein, we report a TSA homolog, tris(disilanyl)amine (TDSA), as a novel chlorine and carbon-free precursor for the deposition of highly etch resistant SiNx thin films having a high growth rate at a low temperature (x using TDSA may be attributed to higher surface reactivity of the molecule enabled by weaker Si–N bonds, higher molecular polarity and the existence of reactive Si–Si bonds in the molecule. The performance of PEALD SiNx grown by TDSA has been compared with that of TSA, aminosilanes and chlorosilanes, and explained with the structure–property relationship of the molecule. TDSA grows SiNx film faster than TSA. Furthermore, the TDSA precursor produces SiNx films that have lower wet etch rate (WER) when compared to other silylamine precursors like TSA, or other types of silane precursors such as aminosilanes and chlorosilanes. We believe that the result, that TDSA-grown SiNx films exhibit lower WER than TSA-grown SiNx films, can be attributed to the abundance of Si in SiNx films, which thereby offers high resistance to a wet etch.
- 19 August 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 8 (37) , 13033-13039
High growth rate and high wet etch resistance silicon nitride grown by low temperature plasma enhanced atomic layer deposition with a novel silylamine precursor
Trisilylamine (TSA), an exemplary chlorine and carbon-free commercial silylamine precursor, is well-known to induce improvements in the process and properties of silicon nitride (SiNx) thin films grown using atomic layer deposition (ALD). Herein, we report a TSA homolog, tris(disilanyl)amine (TDSA), as a novel chlorine and carbon-free precursor for the deposition of highly etch resistant SiNx thin films having a high growth rate at a low temperature (x using TDSA may be attributed to higher surface reactivity of the molecule enabled by weaker Si–N bonds, higher molecular polarity and the existence of reactive Si–Si bonds in the molecule. The performance of PEALD SiNx grown by TDSA has been compared with that of TSA, aminosilanes and chlorosilanes, and explained with the structure–property relationship of the molecule. TDSA grows SiNx film faster than TSA. Furthermore, the TDSA precursor produces SiNx films that have lower wet etch rate (WER) when compared to other silylamine precursors like TSA, or other types of silane precursors such as aminosilanes and chlorosilanes. We believe that the result, that TDSA-grown SiNx films exhibit lower WER than TSA-grown SiNx films, can be attributed to the abundance of Si in SiNx films, which thereby offers high resistance to a wet etch.
- Open Access
Low Temperature Thermal Atomic Layer Deposition of Aluminum Nitride Using Hydrazine as the Nitrogen Source
Aluminum nitride (AlN) thin films were grown using thermal atomic layer deposition in the temperature range of 175–350 °C. The thin films were deposited using trimethyl aluminum (TMA) and hydrazine (N2H4) as a metal precursor and nitrogen source, respectively. Highly reactive N2H4, compared to its conventionally used counterpart, ammonia (NH3), provides a higher growth per cycle (GPC), which is approximately 2.3 times higher at a deposition temperature of 300 °C and, also exhibits a low impurity concentration in as-deposited films. Low temperature AlN films deposited at 225 °C with a capping layer had an Al to N composition ratio of 1:1.1, a close to ideal composition ratio, with a low oxygen content (7.5%) while exhibiting a GPC of 0.16 nm/cycle. We suggest that N2H4 as a replacement for NH3 is a good alternative due to its stringent thermal budget.
Open AccessLow Temperature Thermal Atomic Layer Deposition of Aluminum Nitride Using Hydrazine as the Nitrogen Source
Aluminum nitride (AlN) thin films were grown using thermal atomic layer deposition in the temperature range of 175–350 °C. The thin films were deposited using trimethyl aluminum (TMA) and hydrazine (N2H4) as a metal precursor and nitrogen source, respectively. Highly reactive N2H4, compared to its conventionally used counterpart, ammonia (NH3), provides a higher growth per cycle (GPC), which is approximately 2.3 times higher at a deposition temperature of 300 °C and, also exhibits a low impurity concentration in as-deposited films. Low temperature AlN films deposited at 225 °C with a capping layer had an Al to N composition ratio of 1:1.1, a close to ideal composition ratio, with a low oxygen content (7.5%) while exhibiting a GPC of 0.16 nm/cycle. We suggest that N2H4 as a replacement for NH3 is a good alternative due to its stringent thermal budget.