MTMichael Thomas Tolley

Michael Thomas Tolley

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Recognitions

Top Cited Scholar (2024,2025)

Michael Thomas Tolley has a total of 123 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Printing powerful soft robots on a desktop

    by Yichen Zhai, Michael T. Tolley

    Soft robots can achieve complex behaviors with simple control strategies. One promising approach is to embed fluidic control circuits directly into the structure of a soft robot without electronics. Automated additive manufacturing offers a route to consistently fabricate such integrated robotic systems without labor-intensive manual assembly. However, previous soft robots fabricated using this approach relied on control circuits that operated at low power, limiting their practical utility. Here, we present a 3D-printed high-power pneumatic architecture for driving soft robots. At its core is a double-expansion pneumatic oscillator inspired by the compound steam engine that converts a constant high-pressure gas input into four-phase pressure signals at high frequency. We demonstrate its use in a monolithically 3D-printed hexapod running robot capable of reaching a top speed of 4.72 meters per second with an estimated mechanical power output of 169 watts, exhibiting high-speed locomotion in a fully soft robotic system. The robot traversed rough outdoor terrain and aquatic environments and could also be operated with a liquid working medium, tap water, representing a key advance toward digitally fabricated soft robots with high performance for accomplishing real-world tasks.

  • Open Access

    Bioinspired flow sensor enables underwater robots to estimate motion and detect flow structure

    by Myungsun Park, Allyson E. Chen, Jacobo Cervera-Torralba, Michael T. Tolley, Geno Pawlak

    We address the challenge of sensing self-motion and environmental information by autonomous underwater vehicles. To overcome the limitations of conventional sensing methods in terms of size, cost, and environmental restrictions, previous work has investigated biomimetic flow sensors. Challenges in application of those biomimetic sensors include measuring complex locomotion of the vehicles and detecting external flow structure during the motion, all within a compact form suitable for a small vehicle. To address the challenges, we present a small and lightweight soft magnetic hair flow sensor that can measure the speed, direction, and oscillation of flow based on its mechanical deflection. We tested the ability of these sensors on underwater robots to estimate their forward, lateral (angular) speeds and orientations. While the robots were swimming, the sensors could also detect the wake behind an upstream object by identifying its characteristic frequency. The bioinspired hydrodynamic sensing, as demonstrated with the proposed sensors in this article, could allow adaptive and efficient underwater exploration.


  • Bioinspired Agile Swimming With a Highly Underactuated Soft Ribbon Fin

    by Iman Adibnazari, Suyeon Jeong, Michael T. Tolley

    Soft autonomous underwater vehicles (AUVs) that employ biological swimming mechanisms have demonstrated immense promise in navigating marine environments with increased efficiency and adaptability and decreased environmental disturbances in comparison to their rigid counterparts. However, most AUVs with soft propulsors are poorly suited for precise swimming at low speeds and station holding tasks—two capabilities critical to underwater monitoring and manipulation. In contrast, gymnotid fish undulate an elongated ribbon fin to aptly swim at low-speeds with high agility and have inspired soft AUVs that mimic their swimming mechanics. However, these AUVs typically use numerous actuators to force undulatory kinematics in their ribbon fin rather than leveraging the fluid-structure interaction between the soft ribbon fin and surrounding water. In this work, we developed a sparsely actuated robot, inspired by the black ghost knifefish (apteronotus albifrons) and capable of highly agile swimming with only two actuated fin rays. Leveraging prior work on the hydrodynamics of ribbon-finned swimming, we constructed a heuristic for expected thrust generation as a function of the ribbon fin's actuation. Using this heuristic, we investigated four parameterized motion primitives for agile in-plane swimming: 1) forward swimming, 2) banked turning maneuvers, 3) pure yaw rotation, and 4) lateral (i.e., sideways) swimming. We developed a single parametric gait to express all of these primitives and experimentally characterized each primitive. Ultimately, we found that by leveraging fluid-structure interaction, our highly underactuated platform could execute the in-plane swimming capabilities necessary for agile locomotion.


  • Open Access

    Modeling and validation of a small heave plate wave energy converter

    by Hannah Walker, Michael T. Tolley, Geno Pawlak


  • Fluidic Control of Untethered Underwater Soft Robots

    by Allyson E. Chen, Iman Adibnazari, George Nakoud, Giovanni Torres, Michael T. Tolley

    Soft robots offer considerable advantages relative to traditional, rigid robots, including: versatility, safety, and rich dynamic behavior. A common approach for actuating soft robots is to use pumps and valves to control pressures and flow rates through fluidic channels embedded in a soft material, to cause desired deformations. Usually, an electronic control board carries the pumps, valves, and other components to control this fluid flow. Currently, many existing hydraulic control systems are designed with application-specific performance requirements, forcing researchers to either invest substantial time and effort into developing custom hardware or constrain their soft robotic systems to the limitations of available control platforms. To address these issues, we present an approach to controlling soft robots underwater that can be achieved with a compact, hydraulic control system. We demonstrate this approach with hardware design housed in a 3D-printable enclosure that is water-resistant up to 1 m for 30 min. The system features three independently controlled pumps, each capable of reversible actuation, with a combined maximum pressure of 0.9 MPa and a maximum flow rate of 3.6 L/min. Additionally, we present an approach to flow sensing using onboard RPM sensors, which avoids adding impedance to the fluid channels and, when combined with our direct pump drive approach, enables precise and simultaneous control of multiple soft actuators. This system offers an accessible platform to accelerate the development of future underwater soft robots.


  • Open Access

    Burrowing and unburrowing in submerged granular media through fluidization and shape-change

    by Aniruddha Nayak, Hoseung Seo, Nick Gravish, Michael T. Tolley

    Subterranean exploration in submerged granular media (GM) presents significant challenges for robotic systems due to high drag forces and the complex physics of GM. This paper introduces a robotic system that combines water-jet-based fluidization for self-burrowing in submerged environments and an untethered, volume-change mechanism for burrowing out. The water-based fluidization approach significantly reduces drag on the robot, allowing it to burrow into GM with minimal force. To burrow out, the robot uses a soft, inflatable bladder that undergoes periodic radial expansion, inspired by natural systems such as razor clams. Experimental results demonstrate that increased water flow rates accelerate the burrowing process, while the unburrowing mechanism is effective at varying depths. Comparisons between pneumatic and hydraulic untethered systems highlight trade-offs in terms of operational time and unburrowing speed. This work advances the capabilities of robots in underwater environments, with potential applications in environmental monitoring and underwater archaeology.


  • Electronics-Free 3D-Printed Soft Swimming Robot With Pneumatic Oscillating Control for Efficient Undulating Locomotion

    by Yichen Zhai, Michael T. Tolley

    Soft robots, with their compliance and adaptability, are ideal for applications requiring continuously flexible, dynamic movement, making them promising candidates for underwater locomotion. However, current swimming soft robots often rely on electronic power sources and complex, labor-intensive manufacturing, limiting their scalability and use in challenging environments. Recent advancements in 3D printing, particularly fused filament fabrication (FFF), offer a practical alternative for fabricating soft robots, enabling monolithic structures that require minimal assembly. In this work, we introduce a pneumatically powered, electronics-free swimming robot, fully fabricated from soft thermoplastic elastomer (TPE) using a desktop FFF 3D printer. Inspired by the morphology of the tadpole, our design incorporates a pneumatic oscillating controller as the “brain” and segmented actuators as the “tail,” enabling autonomous undulating propulsion without electronics. We demonstrate untethered operation using a portable CO2 canister and characterize two robot configurations optimized for efficient swimming. The robots achieve controlled oscillation and effective underwater movement, reaching a maximum speed of 0.70 body lengths per second (BL/s). This electronics-free, 3D-printed design represents a step forward in creating low-cost, accessible soft robotic platforms, suited for exploration in aquatic environments where electronics are impractical.


  • Open Access

    Monolithic Desktop Digital Fabrication of Autonomous Walking Robots

    by Yichen Zhai, Jiayao Yan, Albert De Boer, Martin Faber, Rohini Gupta, Michael T. Tolley


  • Open Access

    Multifunctional Position and Stiffness Control of Soft Fluidic Actuators Using Supercooled Liquid

    by Hoseung Seo, Michael T. Tolley

    Soft fluidic actuators (SFAs) are widely adopted for soft robotic applications, for example, for the manipulation of delicate objects of various geometries. However, the innate compliance of SFAs prevents them from sustaining large forces when needed. Existing methods to achieve variable stiffness in SFAs necessitate complex mechanisms that require additional control inputs and often limit the flexibility of the actuators. This work explores the use of supercooled sodium acetate trihydrate (SAT) solution as a multifunctional working fluid for SFAs to allow independent control of position and stiffness; the solution is used to both inflate the elastomer chambers while in liquid state and to achieve a dramatic increase in stiffness with rapid solidification. The mechanical properties of crystallized SAT samples in flexible membranes and with embedded materials for reinforcement are first investigated. SFAs that use the SAT solution to greatly increase their stiffness (up to 13 times) are then tested. Furthermore, the use of supercooled SAT is demonstrated to achieve both manipulation and stiffness change with a single control input. The proposed approach is a new way to combine the high manipulability of SFAs with stiffness tunability and opens up new applications for soft robots and manipulators.


  • InchIGRAB: An Inchworm-Inspired Guided Retraction and Bending Device for Vine Robots During Colonoscopy

    by Ayush Giri, Cédric Girerd, Jacobo Cervera-Torralba, Michael T. Tolley, Tania K. Morimoto

    Vine robots are soft robots that translate by everting, or growing, from their tips. This mechanism of translation minimizes the application of shear forces on the environment, making them particularly well-suited for surgical tasks, such as colonoscopy. However, steering and retracting vine robots within tortuous and delicate environments presents significant challenges. In this article, we introduce a novel soft robotic system for colonoscopy that consists of an inchworm-inspired device—the InchIGRAB—nested within a vine robot. The InchIGRAB is designed to enable steering of the vine robot along curved paths, as well as to enable controlled retraction of the vine robot after it reaches its target. We present the design, modeling, and fabrication of the robotic system and characterize its performance. Furthermore, we demonstrate the presented robotic system's ability to safely navigate the entire colon length, including several curved sections, during both forward motion and retraction, highlighting its potential as a robotic colonoscope that offers enhanced safety for patients.