Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chen Hu has a total of 167 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Crystal-Field Analysis and Temperature-Dependent Luminescence Mechanism of Broadband Near-Infrared Na$_3$Al$_2$Li$_3$F$_{12}$:Cr$^{3+}$ Phosphors

    by Xinlei Zang, Yagang Feng, Yumeng Li, Ziyu Liu, Lei Duan, Shichang Cai, Hanlu Zhang, Chen Hu, Zhenzhen Zhou, Denis Yu. Kosyanov, et al.

    Garnet-structured fluoride phosphors are attractive for phosphor-converted near-infrared light-emitting diodes (NIR pc-LEDs) owing to their broadband emission and thermal stability. Herein, pure-phase Na$_3$Al$_{2-x}$Cr$_x$Li$_3$F$_{12}$ (x = 0--0.16; NALF:Cr$^{3+}$) phosphors were synthesized hydrothermally, and their structure, morphology, crystal field, and luminescence were systematically investigated. Crystal-field analysis yielded a Dq/B of $\sim$2.18, confirming a weak crystal-field environment for Cr$^{3+}$. Under 430 nm excitation, all samples show a broad NIR band over 650--900 nm with a FWHM of $\sim$101 nm, ascribed to the $^4T_{2g}\rightarrow{}^4A_{2g}$ transition. Fluorescence decay and time-resolved emission spectroscopy indicate that Cr$^{3+}$ solely replaces octahedral Al$^{3+}$, forming a single luminescent center, optimal at x = 0.08. The phosphor retains over 67% of its room-temperature intensity at 423 K, and temperature-dependent photoluminescence reveals the zero-phonon line (ZPL) of the $^4T_{2g}\rightarrow{}^4A_{2g}$ transition at 80 K, offering deeper insight into the Cr$^{3+}$ luminescence mechanism in fluoride garnets. NALF:Cr$^{3+}$ is thus a promising broadband NIR phosphor for blue-LED-pumped pc-LEDs.


  • Open Access

    Microstructure and Optical Properties of BaF$_2$ Transparent Ceramics Fabricated by Air Pre-sintering and Hot Isostatic Pressing

    by Heng Liu, Chen Hu, Jingshan Hou, Ziqiu Cheng, Junhao Ye, Tingsong Li, Dong Huang, Yongzheng Fang, Dariusz Hreniak, Jiang Li

    BaF$_2$ scintillation ceramics feature a rapid temporal response, high fast-component light yield, and a short X-ray attenuation length, making them a promising material for ultrafast X-ray imaging. In this work, BaF$_2$ nanopowder was co-precipitated from Ba(NO$_3$)$_2$ and KF$\cdot$2H$_2$O, consolidated by 600-750$^{\circ}$C air pre-sintering, and post-treated by hot isostatic pressing (HIP). The ceramics obtained under various process parameters allowed us to investigate temperature-dependent changes in microstructure, transmittance, and scintillation properties, including X-ray-excited luminescence (XEL), decay kinetics, and light yield. It was found that air pre-sintered compacts are porous, with relative density reaching a maximum at 700$^{\circ}$C. In addition, HIP eliminated most of the pores, leaving only residual intragranular pores. Both in-line transmittance and scintillation properties correlated strongly with increasing air pre-sintering temperature. The optimized BaF$_2$ ceramic achieves an in-line transmittance (1mm thick) of 57.6% and 40.6% at 800nm and 220nm, respectively, with a fast component of 16.8% and a light yield of 2655ph/MeV. High-temperature thermoluminescence suggests that a deep trap with considerable intensity may be responsible for the reduced light yield in the ceramic sample.

  • Open Access

    Composite Al2O3-Ce:LuAG Phosphor Ceramics with High Luminous Efficacy and Thermal Conductivity for High-Brightness Laser Lighting

    by Haiming Li, Ziqiu Cheng, Zhenzhen Zhou, Chen Hu, Junhao Ye, Dong Huang, Yanbin Wang, Tingsong Li, Heng Liu, Shisheng Lin, et al.

    Despite the success of using Al2O3 as a secondary phase in Ce:LuAG phosphor ceramics (PCs), there is still room for improvement in the compositional design of biphasic PCs, as well as in their luminescent and thermal performance. In this study, nanopowders with 40 wt.% Al2O3-0.4at.% Ce:LuAG stoichiometry were synthesized via a co-precipitation approach. Subsequently, a series of compositionally uniform PCs was successfully fabricated by adjusting the vacuum sintering temperature and dwelling time. The grain size distributions of the Al2O3 and LuAG phases, as well as the evolution of porosity and pore size, were systematically analyzed and correlated with the sintering conditions. The addition of Al2O3 has been demonstrated to enhance the thermal properties of ceramics. The thermal conductivity of the “1750 °C × 10 h” sample was 15.6 W·m−1·K−1 at room temperature. Concurrently, it exhibited excellent thermal quenching behavior, retaining 96% of its luminescence intensity upon heating to 450 K. Its fluorescence lifetime was determined to be 21.06 ns. Under 450 nm laser excitation, the optimized PC attained a luminous efficacy of 286 lm·W−1 at 1 W·mm−2. In addition, the luminous flux increased continuously with laser power from 1 to 20 W·mm−2 without any sign of saturation, reaching a maximum of 2500 lm. The findings indicate that biphasic 40 wt.% Al2O3-0.4at.% Ce:LuAG PCs have potential as high-flux, green-color converters for next-generation high-power laser lighting. Furthermore, a laser illumination prototype device incorporating 40 wt.% Al2O3-0.4at.% Ce:LuAG ceramic samples and a 10 W blue laser was constructed. This device emits white light with an illumination range exceeding 500 m, thereby demonstrating its potential applications in laser-driven lighting.

  • Open Access

    Effects of Lu3+ admixture on photo- and radio-luminescence and scintillation characteristics of Gd3-xLuxAl3Ga2O12:Ce,Mg scintillation ceramics

    by Warut Chewpraditkul, Nakarin Pattanaboonmee, Weerapong Chewpraditkul, Chen Hu, Yanbin Wang, Tingsong Li, Dong Huang, Dita Strachotova, Miroslav Kucera, Romana Kučerková, et al.

    Effects of Lu3+ admixture on photo- and radioluminescence, as well as on scintillation characteristics, were investigated in Gd3-xLuxAl3Ga2O12:Ce,Mg (x = 0.5, 1, 1.5, 2) scintillation ceramics fabricated via chemical co-precipitation and a combination of oxygen sintering, HIP post-treatment and annealing. The Ce3+ 5d1 → 4f emission in photo- and radioluminescence bands was gradually blue shifted with increasing Lu content due to a decrease in the crystal field splitting of the 5d levels. Furthermore, the thermal ionization activation energy, determined from the temperature-dependent PL decay kinetics, increased with increasing Lu content, leading to higher thermal stability of the Ce3+ centers and increase of light yield value. The onset temperature at 362 K for luminescence quenching was determined from the temperature-dependent photoluminescence kinetics. The GdLu2Al3Ga2O12:Ce,Mg ceramic exhibited the highest light yield value of 11,400 photons/MeV at 662 keV γ rays along with fast scintillation decay times of 26.5 ns (59%) + 58.2 ns (41%), and good time resolution of 249 ps.

  • Open Access

    High Luminous Efficacy and Thermal Stability of LuAG:Ce Phosphor Ceramics with Porosity for High-brightness Laser Lighting

    by Haiming Li, Ziqiu Cheng, Zhenzhen Zhou, Chen Hu, Junhao Ye, Dong Huang, Yanbin Wang, Tingsong Li, Denis Yu. Kosyanov, Duyou Lu, et al.

    The generation of high-brightness white light in laser-illuminated devices is achieved by exciting yellow-green phosphors with a blue laser source. This configuration offers advantages such as high energy density and strong central luminous intensity. Among luminescent materials, LuAG:Ce phosphor ceramics (PCs) are notable for their high thermal stability and luminous output. In this study, LuAG:Ce PCs were produced from co-precipitated monophase nanopowders. The effects of vacuum sintering and air annealing temperatures on their porosity and luminescent properties were investigated. The sample, sintered at 1550°C and subsequently annealed at 1350°C, exhibited 3.5 vol.% porosity, highest room-temperature emission intensity in the series, and retained 96% of that intensity upon heating to 250°C. Under 450 nm laser-diode excitation, the sample achieved a luminous efficacy of 229 lm·W$^{-1}$ while maintaining excellent thermal stability. These results indicate that introducing controlled porosity to act as light-scattering centers in LuAG:Ce ceramics is a viable materials-design strategy for enhancing the luminous performance of laser-driven lighting devices.


  • Highly Transparent Sm:LuAG Ceramics for Cladding Fabricated by Solid-state Reactive Sintering

    by Junhao Ye, Weiwei Han, Zhenzhen Zhou, Chen Hu, Yiyang Liu, Lexiang Wu, Dong Huang, Tingsong Li, Jiang Li

    In solid-state laser systems with nanosecond repetition rates and high energy, amplified spontaneous emission (ASE) and parasitic oscillation (PO) produced by the gain material can significantly impact the laser output. A well-designed cladding composite structure is an effective solution to absorb ASE and suppress PO. In this work, 5 at.% Sm:LuAG transparent ceramics, a promising cladding material for suppressors of PO at 1064 nm of Nd:LuAG lasers, have been prepared by solid-state reactive sintering at 1825 °C followed by hot isostatic pressing (HIP) post-treatment at 1750 °C. The influences of TEOS (tetraethyl orthosilicate) content on microstructure evolution, in-line transmittance of the 5 at.% Sm:LuAG ceramics were studied. The results show that when the TEOS content is 0.8 wt.%, high transparency Sm:LuAG ceramics can be obtained by vacuum sintering at 1825 °C for 5 h followed by HIP post-treatment at 1750 °C in an argon atmosphere under 200 MPa for 3 h. The optimum in-line transmittance of the HIP-ed Sm:LuAG ceramics (1.5 mm thickness) is 83.3% at a wavelength of 808 nm and absorption coefficient of 3.46 cm$^{-1}$ at 1064 nm, indicating that it can effectively suppress ASE and PO.


  • Glass-microsphere-encapsulated long afterglow phosphors enhance turfgrass growth under low-light stress

    by Yilin Wang, Mingming Shi, Bobo Yang, Jiayi Ren, Qi Wang, Yuanyuan Wang, Chen Hu, Jiang Li, Yun Shi, Oleg Shichalin, et al.


  • Co-precipitation synthesis and sintering of 4.5 at.% Sm:YAG nano-powders for cladding ceramics

    by Yanqiu Jing, Tingsong Li, Zhenzhen Zhou, Chen Hu, Maxim Ivanov, Dariusz Hreniak, Jiang Li

  • Effect of powder calcination temperature on the microstructure and laser performance of Yb:CaF 2 transparent ceramics

    by Xiang Li, Qiang Liu, Lihao Guo, Chen Hu, Junlin Wu, Guido Toci, Angela Pirri, Barbara Patrizi, Matteo Vannini, Dariusz Hreniak, et al.

    The 5 at.% Yb:CaF 2 transparent ceramics were fabricated by hot pressing and hot isostatic pressing (HIP) using nano‐powders synthesized by the co‐precipitation method. Before hot pressing, the co‐precipitated powders were vacuum calcined at different temperatures. To understand the relationship between the calcination temperature and the resulting material properties, a series of in‐depth studies were conducted on the microstructure and optical properties of Yb:CaF 2 ceramics. Following HIP post‐treatment at 600°C, residual porosity within the hot‐pressed ceramics was effectively eliminated, leading to enhancements in optical quality. The ceramic samples hot pressed at 625°C from powders vacuum calcined at 600°C and then HIP post‐treated at 600°C exhibited the highest in‐line transmittance of 91.0% at 1200 nm as well as the best laser performance. The maximum output power of 1.51 W and the maximum slope efficiency of 22.9% were obtained, surpassing those of other Yb:CaF 2 ceramics fabricated via the HP method reported in the literature.


  • Scintillation properties and slow component suppression mechanism of BaF 2 transparent ceramics

    by Xiang Li, Chen Hu, Lihao Guo, Junhao Ye, Yuhao Zhang, Jiawei Xu, Junlin Wu, Qiang Liu, Yun Shi, Junfeng Chen, et al.

    BaF 2 nano‐powders with the average particle size of 148 nm were synthesized by the coprecipitation method. Then, BaF 2 transparent ceramics were successfully fabricated by hot pressing (HP) combined with hot isostatic pressing (HIP). The BaF 2 transparent ceramics with the thickness of 2 mm exhibited an in‐line transmittance of 42.9% at 800 nm. In addition, the scintillation performance of the BaF 2 transparent ceramics was systematically studied. The XEL (X‐ray excited luminescence) spectra and scintillation decay curves demonstrate that the slow components in the BaF 2 ceramics are effectively suppressed compared with that in single crystal, and the fast component of undoped BaF 2 ceramics reaches 21.2% with a light yield of 5973 ph/MeV. To further investigate the mechanism of slow component suppression in BaF 2 ceramics, the temperature‐dependent XEL spectra and low‐temperature TSL (thermal stimulated luminescence) curves were also investigated. The results demonstrate that there may be faster quenching centers within the ceramics that quench STE (Self‐trapping exciton), and the intensity of the first TSL peak was reduced compared to that of crystals, thus leading to a decrease in the percentage of slow component of BaF 2 ceramics.