Markus Schewe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Markus Schewe has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Andreas Menzel
Institute of Mechanics, TU Dortmund University, Germany
5 shared publications Andreas Menzel
TU Dortmund
3 shared publications- Thorsten Bartel
TU Dortmund, Institute of Mechanics Dortmund Germany
3 shared publications - Ernst Kozeschnik
Institute of Materials Science and Technology, TU Wien, Getreidemarkt 9, 1060 Vienna, Austria
1 shared publication - Hamed Dardaei Joghan
TU Dortmund University Institute of Forming Technology and Lightweight Components
1 shared publication - Isabelle Noll
Department of Mechanical Engineering, Institute of Mechanics, TU Dortmund University, Dortmund, Germany
1 shared publication
Latest Publications
- Open Access
- 24 July 2026
- Published by Elsevier in Additive Manufacturing Letters
- Vol. 18
Inverse calibration of a thermal model for Directed Energy Deposition from thermocouple and infrared thermography data
- 24 July 2026
- Published by Elsevier in Additive Manufacturing Letters
- Vol. 18
Open AccessInverse calibration of a thermal model for Directed Energy Deposition from thermocouple and infrared thermography data
- Open Access
- 30 April 2026
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 458
A three-dimensional thermomechanical Particle Finite Element framework — Towards the simulation of laser directed energy deposition
- 30 April 2026
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 458
Open AccessA three-dimensional thermomechanical Particle Finite Element framework — Towards the simulation of laser directed energy deposition
- Open Access
- 8 February 2025
- Published by Elsevier in Mechanics of Materials
- Vol. 204
Modelling and finite element simulation of martensite and bainite phase transformations during quenching under consideration of carbon repartitioning
- 8 February 2025
- Published by Elsevier in Mechanics of Materials
- Vol. 204
Open AccessModelling and finite element simulation of martensite and bainite phase transformations during quenching under consideration of carbon repartitioning
- Open Access
- 23 January 2025
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 437
Towards the simulation of metal deposition with the Particle Finite Element Method and a phase transformation model
- 23 January 2025
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 437
Open AccessTowards the simulation of metal deposition with the Particle Finite Element Method and a phase transformation model
- Open Access
- 20 August 2024
- Published by Springer Nature in Computational Mechanics
- Vol. 75 (2) , 755-773
Comparison of elements and state-variable transfer methods for quasi-incompressible material behaviour in the particle finite element method
The Particle Finite Element Method (PFEM) is attractive for the simulation of large deformation problems, e.g. in free-surface fluid flows, fluid–structure interaction and in solid mechanics for geotechnical engineering and production processes. During cutting, forming or melting of metal, quasi-incompressible material behaviour is often considered. To circumvent the associated volumetric locking in finite element simulations, different approaches have been proposed in the literature and a stabilised low-order mixed formulation (P1P1) is state-of-the-art. The present paper compares the established mixed formulation with a higher order pure displacement element (TRI6) under 2d plane strain conditions. The TRI6 element requires specialized handling, involving the deletion and re-addition of edge-mid-nodes during triangulation remeshing. The robustness of both element formulations is analysed along with different state-variable transfer schemes, which are not yet widely discussed in the literature. The influence of the stabilisation factor in the P1P1 element formulation is investigated, and an equation linking this factor to the Poisson ratio for hyperelastic materials is proposed.
- 20 August 2024
- Published by Springer Nature in Computational Mechanics
- Vol. 75 (2) , 755-773
Open AccessComparison of elements and state-variable transfer methods for quasi-incompressible material behaviour in the particle finite element method
The Particle Finite Element Method (PFEM) is attractive for the simulation of large deformation problems, e.g. in free-surface fluid flows, fluid–structure interaction and in solid mechanics for geotechnical engineering and production processes. During cutting, forming or melting of metal, quasi-incompressible material behaviour is often considered. To circumvent the associated volumetric locking in finite element simulations, different approaches have been proposed in the literature and a stabilised low-order mixed formulation (P1P1) is state-of-the-art. The present paper compares the established mixed formulation with a higher order pure displacement element (TRI6) under 2d plane strain conditions. The TRI6 element requires specialized handling, involving the deletion and re-addition of edge-mid-nodes during triangulation remeshing. The robustness of both element formulations is analysed along with different state-variable transfer schemes, which are not yet widely discussed in the literature. The influence of the stabilisation factor in the P1P1 element formulation is investigated, and an equation linking this factor to the Poisson ratio for hyperelastic materials is proposed.
- 5 November 2020
- Published by Springer Nature
- p. 434-457
Mechanism-Based Modelling of Wear in Sheet-Bulk Metal Forming
- 5 November 2020
- Published by Springer Nature
- p. 434-457
Mechanism-Based Modelling of Wear in Sheet-Bulk Metal Forming
- Open Access
- 18 November 2019
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 19 (1)
Aspects of the Particle Finite Element Method applied to contact problems
The Particle Finite Element Method (PFEM) developed by [1] is designed to allow changes in the outer shape of a body while performing a Finite Element Analysis. This is achieved by repeated remeshing and shape detection of a particle cloud, which represents the body under consideration. The shape detection method creates new surfaces if formerly connected points on the surface move away from each other sufficiently. This method allows to model material separation, e.g. in metal cutting, see [2]. Details on advanced strategies to refine the detected shape are presented. Considering abrasive wear of surfaces, a mechanism‐based approach aims to model such separation of surface particles on a mesoscale. The basis of this approach consists of a contact algorithm that captures the interaction of solid bodies. This contribution presents a contact domain method [3] which is implemented in PFEM. The approach uses the abilities of the shape detection method as a contact search method. Furthermore, strategies for solving large strain boundary value problems using this contact model are discussed. Numerical examples show the abilities of the approach in an exemplary large strain contact problem.
- 18 November 2019
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 19 (1)
Open AccessAspects of the Particle Finite Element Method applied to contact problems
The Particle Finite Element Method (PFEM) developed by [1] is designed to allow changes in the outer shape of a body while performing a Finite Element Analysis. This is achieved by repeated remeshing and shape detection of a particle cloud, which represents the body under consideration. The shape detection method creates new surfaces if formerly connected points on the surface move away from each other sufficiently. This method allows to model material separation, e.g. in metal cutting, see [2]. Details on advanced strategies to refine the detected shape are presented. Considering abrasive wear of surfaces, a mechanism‐based approach aims to model such separation of surface particles on a mesoscale. The basis of this approach consists of a contact algorithm that captures the interaction of solid bodies. This contribution presents a contact domain method [3] which is implemented in PFEM. The approach uses the abilities of the shape detection method as a contact search method. Furthermore, strategies for solving large strain boundary value problems using this contact model are discussed. Numerical examples show the abilities of the approach in an exemplary large strain contact problem.
- 17 December 2018
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 18 (1) , 1-2
The Particle Finite Element Method for the modelling and simulation of solid body interactions
Both simulation and, in particular, the underlying algorithmic treatment of effects such as fracture or abrasive wear are generally very complex in nature and thus computationally expensive. The Particle Finite Element Method (PFEM) according to [1] constitutes a promising compromise between physical accuracy and computational efficiency. The PFEM allows the separation of material within a repeated remeshing and shape detection step. Such applications of the PFEM may be incorporated in simulations of fracture and cutting. The methods used in PFEM can be adapted to the task of identifying contact areas and meshing the contact zone between solid bodies. Therefore, PFEM offers a good framework to combine both, the contact between solid bodies and the separation of material, in order to develop a simulation framework for abrasive wear.
- 17 December 2018
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 18 (1) , 1-2
The Particle Finite Element Method for the modelling and simulation of solid body interactions
Both simulation and, in particular, the underlying algorithmic treatment of effects such as fracture or abrasive wear are generally very complex in nature and thus computationally expensive. The Particle Finite Element Method (PFEM) according to [1] constitutes a promising compromise between physical accuracy and computational efficiency. The PFEM allows the separation of material within a repeated remeshing and shape detection step. Such applications of the PFEM may be incorporated in simulations of fracture and cutting. The methods used in PFEM can be adapted to the task of identifying contact areas and meshing the contact zone between solid bodies. Therefore, PFEM offers a good framework to combine both, the contact between solid bodies and the separation of material, in order to develop a simulation framework for abrasive wear.