Juan Jesús Navarro
Juan Jesús Navarro has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Beatriz Roldan Cuenya
Fritz Haber Institute of the Max Planck Society
8 shared publications - Markus Heyde
Fritz‐Haber‐Institut der Max‐Planck‐Gesellschaft Faradayweg 4–6 14195 Berlin Germany
8 shared publications - Felix Landwehr
Department of Interface Science Fritz‐Haber Institute of the Max Planck Society Faradayweg 4–6 14195 Berlin Germany
7 shared publications - Rodolfo Miranda
IMDEA-Nanociencia
7 shared publications - Amadeo Lopez Vazquez de Parga
Instituto Madrileño de Estudios Avanzados en Nanociencia (IMDEA-Nanociencia), 28049 Madrid, Spain
6 shared publications - Frank Glorius
Universität Münster
6 shared publications
Latest Publications
- Open Access
- 23 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (31) , 27676-27684
Writing with Molecules: Tip-Induced Local Chemisorption of N-Heterocyclic Olefins on Cu(111)
N-Heterocyclic olefins (NHOs), possessing highly polarizable electron-rich double bonds, have recently received increased attention as promising ligands to modify the properties of various surfaces such as Cu, Au, and Si. This work demonstrates the precise "writing" of molecules on a Cu(111) surface by using the electric field of a scanning tunneling microscope (STM) tip. This selectively switches the molecules from a mobile, physisorbed state to a chemisorbed state with molecular, nanoscale spatial resolution under ultrahigh vacuum conditions. We utilize STM and high-resolution electron energy-loss spectroscopy supported by density-functional theory to investigate adsorption and orientation of the molecules on the Cu(111) surface. We find that IPr-NHO adopts two distinct adsorption states on Cu(111): a mobile, physisorbed state and a chemisorbed state. We can distinguish between the two states using X-ray photoelectron spectroscopy and show that the mobile species can be transformed into the immobile species via interaction with the STM tip with molecular precision. This enables "writing" of IPr-NHO on Cu(111) as the molecules can be chemisorbed in a predefined assembly in intentionally designed shapes, opening new possibilities for nanofabrication, molecular electronics, and tunable surface chemistry.
- 23 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (31) , 27676-27684
Open AccessWriting with Molecules: Tip-Induced Local Chemisorption of N-Heterocyclic Olefins on Cu(111)
N-Heterocyclic olefins (NHOs), possessing highly polarizable electron-rich double bonds, have recently received increased attention as promising ligands to modify the properties of various surfaces such as Cu, Au, and Si. This work demonstrates the precise "writing" of molecules on a Cu(111) surface by using the electric field of a scanning tunneling microscope (STM) tip. This selectively switches the molecules from a mobile, physisorbed state to a chemisorbed state with molecular, nanoscale spatial resolution under ultrahigh vacuum conditions. We utilize STM and high-resolution electron energy-loss spectroscopy supported by density-functional theory to investigate adsorption and orientation of the molecules on the Cu(111) surface. We find that IPr-NHO adopts two distinct adsorption states on Cu(111): a mobile, physisorbed state and a chemisorbed state. We can distinguish between the two states using X-ray photoelectron spectroscopy and show that the mobile species can be transformed into the immobile species via interaction with the STM tip with molecular precision. This enables "writing" of IPr-NHO on Cu(111) as the molecules can be chemisorbed in a predefined assembly in intentionally designed shapes, opening new possibilities for nanofabrication, molecular electronics, and tunable surface chemistry.
- Open Access
- 10 June 2024
- Published by Wiley in Advanced Materials Interfaces
- Vol. 11 (31)
N‐Heterocyclic Olefins on a Metallic Surface – Adsorption, Orientation, and Electronic Influence
N‐Heterocyclic olefins (NHOs), possessing highly polarizable and remarkably electron‐rich double bonds, have been effectively utilized as exceptional anchors for surface modifications. Herein, the adsorption, orientation, and electronic properties of NHOs on a metal surface are investigated. On Cu(111), the sterically low‐demanding IMe‐NHO is compared to its analogous IMe‐NHC counterpart. High‐resolution electron energy‐loss spectroscopy (HREELS) measurements show for both molecules a flat‐lying ring adsorption configuration. While the NHC adopts a dimer configuration including a Cu adatom, the NHO chemisorbs over a C–Cu bond perpendicular to the surface. This distinct difference leads for the IMe‐NHOs to have a higher thermal stability on the surface. Moreover, IMe‐NHOs introduce a higher net electron transfer to the surface compared to the IMe‐NHCs, which results in a stronger effect on the work function. These results highlight the role of NHOs in surface science as they extend the functionalization capabilities of NHCs into stronger electronic modification.
- 10 June 2024
- Published by Wiley in Advanced Materials Interfaces
- Vol. 11 (31)
Open AccessN‐Heterocyclic Olefins on a Metallic Surface – Adsorption, Orientation, and Electronic Influence
N‐Heterocyclic olefins (NHOs), possessing highly polarizable and remarkably electron‐rich double bonds, have been effectively utilized as exceptional anchors for surface modifications. Herein, the adsorption, orientation, and electronic properties of NHOs on a metal surface are investigated. On Cu(111), the sterically low‐demanding IMe‐NHO is compared to its analogous IMe‐NHC counterpart. High‐resolution electron energy‐loss spectroscopy (HREELS) measurements show for both molecules a flat‐lying ring adsorption configuration. While the NHC adopts a dimer configuration including a Cu adatom, the NHO chemisorbs over a C–Cu bond perpendicular to the surface. This distinct difference leads for the IMe‐NHOs to have a higher thermal stability on the surface. Moreover, IMe‐NHOs introduce a higher net electron transfer to the surface compared to the IMe‐NHCs, which results in a stronger effect on the work function. These results highlight the role of NHOs in surface science as they extend the functionalization capabilities of NHCs into stronger electronic modification.
- Open Access
- 29 January 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (2) , 644-652
The Influence of Mesoscopic Surface Structure on the Electrocatalytic Selectivity of CO2 Reduction with UHV-Prepared Cu(111) Single Crystals
The key role of morphological defects (e.g., irregular steps and dislocations) on the selectivity of model Cu catalysts for the electrocatalytic reduction of CO2 (CO2RR) is illustrated here. Cu(111) single-crystal surfaces prepared under ultrahigh vacuum (UHV) conditions and presenting similar chemical and local microscopic surface features were found to display different product selectivity during the CO2RR. In particular, changes in selectivity from hydrogen-dominant to hydrocarbon-dominant product distributions were observed based on the number of CO2RR electrolysis pretreatment cycles performed prior to a subsequent UHV surface regeneration treatment, which lead to surfaces with seemingly identical chemical composition and local crystallographic structure. However, significant mesostructural changes were observed through a micron-scale microscopic analysis, including a higher density of irregular steps on the samples producing hydrocarbons. Thus, our findings highlight that step edges are key for C-C coupling in the CO2RR and that not only atomistic but also mesoscale characterization of electrocatalytic materials is needed in order to comprehend complex selectivity trends.
- 29 January 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (2) , 644-652
Open AccessThe Influence of Mesoscopic Surface Structure on the Electrocatalytic Selectivity of CO2 Reduction with UHV-Prepared Cu(111) Single Crystals
The key role of morphological defects (e.g., irregular steps and dislocations) on the selectivity of model Cu catalysts for the electrocatalytic reduction of CO2 (CO2RR) is illustrated here. Cu(111) single-crystal surfaces prepared under ultrahigh vacuum (UHV) conditions and presenting similar chemical and local microscopic surface features were found to display different product selectivity during the CO2RR. In particular, changes in selectivity from hydrogen-dominant to hydrocarbon-dominant product distributions were observed based on the number of CO2RR electrolysis pretreatment cycles performed prior to a subsequent UHV surface regeneration treatment, which lead to surfaces with seemingly identical chemical composition and local crystallographic structure. However, significant mesostructural changes were observed through a micron-scale microscopic analysis, including a higher density of irregular steps on the samples producing hydrocarbons. Thus, our findings highlight that step edges are key for C-C coupling in the CO2RR and that not only atomistic but also mesoscale characterization of electrocatalytic materials is needed in order to comprehend complex selectivity trends.
- Open Access
- 6 October 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (41) , 17528-17535
Promoted Thermal Reduction of Copper Oxide Surfaces by N-Heterocyclic Carbenes
- 6 October 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (41) , 17528-17535
Open AccessPromoted Thermal Reduction of Copper Oxide Surfaces by N-Heterocyclic Carbenes
- Open Access
- 1 September 2022
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 144 (36) , 16267-16271
Covalent Adsorption of N-Heterocyclic Carbenes on a Copper Oxide Surface
Tuning the properties of oxide surfaces through the adsorption of designed ligands is highly desirable for several applications, such as catalysis. N-Heterocyclic carbenes (NHCs) have been successfully employed as ligands for the modification of metallic surfaces. On the other hand, their potential as modifiers of ubiquitous oxide surfaces still needs to be developed. Here we show that a model NHC binds covalently to a copper oxide surface under UHV conditions. In particular, we report the first example of a covalent bond between NHCs and oxygen atoms from the oxide layer. This study demonstrates that NHC can also act as a strong anchor on oxide surfaces.
- 1 September 2022
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 144 (36) , 16267-16271
Open AccessCovalent Adsorption of N-Heterocyclic Carbenes on a Copper Oxide Surface
Tuning the properties of oxide surfaces through the adsorption of designed ligands is highly desirable for several applications, such as catalysis. N-Heterocyclic carbenes (NHCs) have been successfully employed as ligands for the modification of metallic surfaces. On the other hand, their potential as modifiers of ubiquitous oxide surfaces still needs to be developed. Here we show that a model NHC binds covalently to a copper oxide surface under UHV conditions. In particular, we report the first example of a covalent bond between NHCs and oxygen atoms from the oxide layer. This study demonstrates that NHC can also act as a strong anchor on oxide surfaces.
- Open Access
- 10 June 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (30)
Wachstum von N‐heterocyclischen Carbenen auf Cu(100) und Cu(111): von einzelnen Molekülen bis hin zu Inseln mit magischen Zahlen
N‐Heterocyclische Carbene (NHCs) haben ausgezeichnete Eigenschaften als Bausteine von selbstorganisierten Monoschichten (SAMs). Bevor diese Moleküle in technologischen Anwendungen zum Einsatz kommen können, ist als grundlegender Schritt der Einfluss des Substrates auf molekulare Anordnungen zu verstehen. Hier untersuchen wir die molekulare Anordnung eines Modell‐NHC auf Cu(100) und Cu(111). Während auf Cu(100) meist ungeordnete Phasen auftreten, bilden sich auf Cu(111) wohldefinierte Strukturen, die abhängig von der Bedeckung Inseln mit bevorzugter Anzahl von Molekülen (magische Zahlen) bis hin zu Streifenanordnungen zeigen. Diese Arbeit präsentiert das erste Beispiel von aus NHC gebildeten Inseln mit magischen Zahlen auf ebenen Oberflächen. Diffusion und Kommensurabilität sind wesentliche Faktoren zur Aufklärung der beobachteten Anordnungen. Diese Ergebnisse geben Aufschluss über die Molekül‐Substrat‐Wechselwirkung und eröffnen die Möglichkeit, auf NHC‐Verbindungen basierte Nanostrukturen abzustimmen.
- 10 June 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (30)
Open AccessWachstum von N‐heterocyclischen Carbenen auf Cu(100) und Cu(111): von einzelnen Molekülen bis hin zu Inseln mit magischen Zahlen
N‐Heterocyclische Carbene (NHCs) haben ausgezeichnete Eigenschaften als Bausteine von selbstorganisierten Monoschichten (SAMs). Bevor diese Moleküle in technologischen Anwendungen zum Einsatz kommen können, ist als grundlegender Schritt der Einfluss des Substrates auf molekulare Anordnungen zu verstehen. Hier untersuchen wir die molekulare Anordnung eines Modell‐NHC auf Cu(100) und Cu(111). Während auf Cu(100) meist ungeordnete Phasen auftreten, bilden sich auf Cu(111) wohldefinierte Strukturen, die abhängig von der Bedeckung Inseln mit bevorzugter Anzahl von Molekülen (magische Zahlen) bis hin zu Streifenanordnungen zeigen. Diese Arbeit präsentiert das erste Beispiel von aus NHC gebildeten Inseln mit magischen Zahlen auf ebenen Oberflächen. Diffusion und Kommensurabilität sind wesentliche Faktoren zur Aufklärung der beobachteten Anordnungen. Diese Ergebnisse geben Aufschluss über die Molekül‐Substrat‐Wechselwirkung und eröffnen die Möglichkeit, auf NHC‐Verbindungen basierte Nanostrukturen abzustimmen.
- Open Access
- 10 June 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (30) , e202202127
Growth of N‐Heterocyclic Carbene Assemblies on Cu(100) and Cu(111): From Single Molecules to Magic‐Number Islands
N‐Heterocyclic carbenes (NHCs) have superior properties as building blocks of self‐assembled monolayers (SAMs). Understanding the influence of the substrate in the molecular arrangement is a fundamental step before employing these ligands in technological applications. Herein, we study the molecular arrangement of a model NHC on Cu(100) and Cu(111). While mostly disordered phases appear on Cu(100), on Cu(111) well‐defined structures are formed, evolving from magic‐number islands to molecular ribbons with coverage. This work presents the first example of magic‐number islands formed by NHC assemblies on flat surfaces. Diffusion and commensurability are key factors explaining the observed arrangements. These results shed light on the molecule‐substrate interaction and open the possibility of tuning nanopatterned structures based on NHC assemblies.
- 10 June 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (30) , e202202127
Open AccessGrowth of N‐Heterocyclic Carbene Assemblies on Cu(100) and Cu(111): From Single Molecules to Magic‐Number Islands
N‐Heterocyclic carbenes (NHCs) have superior properties as building blocks of self‐assembled monolayers (SAMs). Understanding the influence of the substrate in the molecular arrangement is a fundamental step before employing these ligands in technological applications. Herein, we study the molecular arrangement of a model NHC on Cu(100) and Cu(111). While mostly disordered phases appear on Cu(100), on Cu(111) well‐defined structures are formed, evolving from magic‐number islands to molecular ribbons with coverage. This work presents the first example of magic‐number islands formed by NHC assemblies on flat surfaces. Diffusion and commensurability are key factors explaining the observed arrangements. These results shed light on the molecule‐substrate interaction and open the possibility of tuning nanopatterned structures based on NHC assemblies.
- Open Access
- 1 July 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (7) , 074104
Development of a single crystal sample holder for interfacing ultrahigh vacuum and electrochemical experimentation
Electrocatalyst surfaces prepared under ultrahigh vacuum (UHV) conditions can create model surfaces to better connect theoretical calculations with experimental studies. The development of a single crystal sample holder and inert electrochemical cells prepared with modularity and chemical stability in mind would allow for expensive single crystals to be reused indefinitely in both UHV and electrochemical settings. This sample holder shows reproducible surface preparations for single crystal samples and consistent electrochemical experiments without the introduction of impurities into the surface. The presented setup has been used as a critical piece for the characterization of Cu(111) surfaces under CO2 electrochemical reduction reaction conditions as a test case.
- 1 July 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (7) , 074104
Open AccessDevelopment of a single crystal sample holder for interfacing ultrahigh vacuum and electrochemical experimentation
Electrocatalyst surfaces prepared under ultrahigh vacuum (UHV) conditions can create model surfaces to better connect theoretical calculations with experimental studies. The development of a single crystal sample holder and inert electrochemical cells prepared with modularity and chemical stability in mind would allow for expensive single crystals to be reused indefinitely in both UHV and electrochemical settings. This sample holder shows reproducible surface preparations for single crystal samples and consistent electrochemical experiments without the introduction of impurities into the surface. The presented setup has been used as a critical piece for the characterization of Cu(111) surfaces under CO2 electrochemical reduction reaction conditions as a test case.
- 12 August 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (7) , 073108
Robust, carbon related, superconducting nanostructure at the apex of a tungsten STM tip
By pulsing the tunneling voltage between the Tungsten (W) tip of a Scanning Tunneling Microscope (STM) and a graphene-covered metal surface, a superconducting (SC) nanostructure is formed at the apex of the STM tip. We have characterized the SC properties of the resulting nanotip as a function of temperature and magnetic field, obtaining a transition temperature of 3.3 K and a critical field well above 3 T. The SC nanotip is robust and stable and achieves atomic resolution. A non-SC tip can be easily recovered by controlled voltage pulsing on a clean metal surface. The present result should be taken into account when studying zero-bias features like Kondo resonances, zero-bias-conductance peaks, or superconductivity on graphene-based systems by means of STM using tungsten tips.
- 12 August 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (7) , 073108
Robust, carbon related, superconducting nanostructure at the apex of a tungsten STM tip
By pulsing the tunneling voltage between the Tungsten (W) tip of a Scanning Tunneling Microscope (STM) and a graphene-covered metal surface, a superconducting (SC) nanostructure is formed at the apex of the STM tip. We have characterized the SC properties of the resulting nanotip as a function of temperature and magnetic field, obtaining a transition temperature of 3.3 K and a critical field well above 3 T. The SC nanotip is robust and stable and achieves atomic resolution. A non-SC tip can be easily recovered by controlled voltage pulsing on a clean metal surface. The present result should be taken into account when studying zero-bias features like Kondo resonances, zero-bias-conductance peaks, or superconductivity on graphene-based systems by means of STM using tungsten tips.
- Open Access
- 7 December 2018
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 4 (12) , eaau9366
Graphene catalyzes the reversible formation of a C–C bond between two molecules
Carbon deposits are well-known inhibitors of transition metal catalysts. In contrast to this undesirable behavior, here we show that epitaxial graphene grown on Ru(0001) promotes the reversible formation of a C–C bond between −CH2CN and 7,7,8,8-tetracyano-p-quinodimethane (TCNQ). The catalytic role of graphene is multifaceted: First, it allows for an efficient charge transfer between the surface and the reactants, thus favoring changes in carbon hybridization; second, it holds the reactants in place and makes them reactive. The reaction is fully reversible by injecting electrons with an STM tip on the empty molecular orbitals of the product. The making and breaking of the C–C bond is accompanied by the switching off and on of a Kondo resonance, so that the system can be viewed as a reversible magnetic switch controlled by a chemical reaction.
- 7 December 2018
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 4 (12) , eaau9366
Open AccessGraphene catalyzes the reversible formation of a C–C bond between two molecules
Carbon deposits are well-known inhibitors of transition metal catalysts. In contrast to this undesirable behavior, here we show that epitaxial graphene grown on Ru(0001) promotes the reversible formation of a C–C bond between −CH2CN and 7,7,8,8-tetracyano-p-quinodimethane (TCNQ). The catalytic role of graphene is multifaceted: First, it allows for an efficient charge transfer between the surface and the reactants, thus favoring changes in carbon hybridization; second, it holds the reactants in place and makes them reactive. The reaction is fully reversible by injecting electrons with an STM tip on the empty molecular orbitals of the product. The making and breaking of the C–C bond is accompanied by the switching off and on of a Kondo resonance, so that the system can be viewed as a reversible magnetic switch controlled by a chemical reaction.