Helmut Hausmann
Research Subjects
Helmut Hausmann has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Wolfgang Lenhardt
Austrian Seismological Service, GeoSphere Austria, Vienna, Austria
3 shared publications K. Krainer
2 shared publications- Maria-Theresia Apoloner
Zentralanstalt für Meteorologie und Geodynamik (ZAMG), Vienna, Austria
2 shared publications AlpArray Working Group
1 shared publicationC. Barbante
1 shared publicationC. Freudenthaler
Zentralanstalt für Meteorologie und Geodynamik Vienna Austria
1 shared publication
Latest Publications
- 6 December 2024
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 115 (1) , 130-139
The Unusual Seismic Activity from 2021 to 2024 in Eastern Austria: Insights from Seismic Sequences Relocation and Moment Tensor Inversion
From 2021 to 2024, unusually strong seismic activity, including multiple sequences with five 3.8≤ML≤4.6 shocks, struck the Vienna basin and Mur-Mürz fault systems in Eastern Austria. Three earthquakes (ML 4.6, 4.5, and 3.8) occurred between March and May 2021. These earthquakes were followed by an increase in seismic activity in March 2023, with an ML 4.3 earthquake to the southwest of the 2021 events. In February 2024, an ML 4.5 earthquake occurred 10 km southwest of the ML 4.3 in 2023. We investigate activated faults relying on nonlinear relocations of the seismic sequences and probabilistic moment tensor inversion. The seismic sequences’ temporal evolution indicates a migration of seismic activity and a decrease of focal depths from northeast to southwest, suggesting a potential reactivation of the major fault systems in the region. The joint interpretation of the results shows distinct clusters along fault segments and focal mechanisms that match the region’s complex tectonic activity.
- 6 December 2024
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 115 (1) , 130-139
The Unusual Seismic Activity from 2021 to 2024 in Eastern Austria: Insights from Seismic Sequences Relocation and Moment Tensor Inversion
From 2021 to 2024, unusually strong seismic activity, including multiple sequences with five 3.8≤ML≤4.6 shocks, struck the Vienna basin and Mur-Mürz fault systems in Eastern Austria. Three earthquakes (ML 4.6, 4.5, and 3.8) occurred between March and May 2021. These earthquakes were followed by an increase in seismic activity in March 2023, with an ML 4.3 earthquake to the southwest of the 2021 events. In February 2024, an ML 4.5 earthquake occurred 10 km southwest of the ML 4.3 in 2023. We investigate activated faults relying on nonlinear relocations of the seismic sequences and probabilistic moment tensor inversion. The seismic sequences’ temporal evolution indicates a migration of seismic activity and a decrease of focal depths from northeast to southwest, suggesting a potential reactivation of the major fault systems in the region. The joint interpretation of the results shows distinct clusters along fault segments and focal mechanisms that match the region’s complex tectonic activity.
- Open Access
- 23 March 2020
- Published by Copernicus GmbH
Intensity Prediction Equation for Austria: Applications and analysis
We present the results of the intensity prediction equation for Austria as a function of moment magnitude, focal depth and hypocentral distance from the source. This equation aims to be simple and correct to generate shakemaps in near-real-time for crisis management and risk assessment in terms of the impact of an earthquake. Before the model computation, the dataset was carefully selected from the Austrian Earthquake Catalogue (AEC). Then, the model was derived through two Ordinary Least Square Adjustments; the first one was used to calibrate the epicentral intensity, whereas the second one aimed to derive an intensity attenuation law. Additionally, first own-approach to remove local site effects was used to refine the model. In total, the used dataset includes 42 earthquakes befalling in Austria and border regions between 2004 and 2018. Their local magnitude varies between 3.0 and 5.4. In total, 3,214 IDPs with intensity values between III and VII-VIII (EMS-98) were used.Applications and analysis of the model will be presented. Furthermore, first results to an Austrian hazard map based on intensities will be introduced.
- 23 March 2020
- Published by Copernicus GmbH
Open AccessIntensity Prediction Equation for Austria: Applications and analysis
We present the results of the intensity prediction equation for Austria as a function of moment magnitude, focal depth and hypocentral distance from the source. This equation aims to be simple and correct to generate shakemaps in near-real-time for crisis management and risk assessment in terms of the impact of an earthquake. Before the model computation, the dataset was carefully selected from the Austrian Earthquake Catalogue (AEC). Then, the model was derived through two Ordinary Least Square Adjustments; the first one was used to calibrate the epicentral intensity, whereas the second one aimed to derive an intensity attenuation law. Additionally, first own-approach to remove local site effects was used to refine the model. In total, the used dataset includes 42 earthquakes befalling in Austria and border regions between 2004 and 2018. Their local magnitude varies between 3.0 and 5.4. In total, 3,214 IDPs with intensity values between III and VII-VIII (EMS-98) were used.Applications and analysis of the model will be presented. Furthermore, first results to an Austrian hazard map based on intensities will be introduced.
- Open Access
- 23 March 2020
- Published by Copernicus GmbH
Estimation of seismic network detection thresholds for Austria
Seismic networks are expanding and changing continuously: station instrumentation breaks and improves, new stations are set up permanently and temporarily for projects, or get available online from seismological services. For routine processing, it is important to know if and where adding an existing station to processing or building or improving a station will add the most value to the detection an location capabilities.Therefore, in this study we calculate seismic network detectionthresholds for Austria using data available to us from different sources: From the Seismic Network of Austria (OE), which consists of unevenly distributed high quality low noise broadband and strong-motion stations, with station spacing up to 100 km. Cross-border from neighboring countries, where each of them operates at least one seismic network with very different station quality and coverage. As well as from temporary regional scientific projects (i.a. AlpArray (Z3), the SWATH (ZS)) and local infrastructure monitoring (GeoTief EXPLORE 3D).Additionally to comparing different methods (SN-CAST by Möllhoff et al. 2019, Net-Sim by Niko Horn, GT5-criterium) with each other, we also analyze how strong-motion stations, recently added due to the interregio project ARMONIA, improve the detection capabilities.
- 23 March 2020
- Published by Copernicus GmbH
Open AccessEstimation of seismic network detection thresholds for Austria
Seismic networks are expanding and changing continuously: station instrumentation breaks and improves, new stations are set up permanently and temporarily for projects, or get available online from seismological services. For routine processing, it is important to know if and where adding an existing station to processing or building or improving a station will add the most value to the detection an location capabilities.Therefore, in this study we calculate seismic network detectionthresholds for Austria using data available to us from different sources: From the Seismic Network of Austria (OE), which consists of unevenly distributed high quality low noise broadband and strong-motion stations, with station spacing up to 100 km. Cross-border from neighboring countries, where each of them operates at least one seismic network with very different station quality and coverage. As well as from temporary regional scientific projects (i.a. AlpArray (Z3), the SWATH (ZS)) and local infrastructure monitoring (GeoTief EXPLORE 3D).Additionally to comparing different methods (SN-CAST by Möllhoff et al. 2019, Net-Sim by Niko Horn, GT5-criterium) with each other, we also analyze how strong-motion stations, recently added due to the interregio project ARMONIA, improve the detection capabilities.
- Open Access
- 18 December 2018
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 37 (12) , 4625-4654
Active Seismotectonic Deformation in Front of the Dolomites Indenter, Eastern Alps
We use earthquake focal mechanisms to study present‐day deformation and stress in the western part of the Eastern European Alps. We define the following regions, based on seismicity and kinematically compatible focal mechanism types: (1) the northern and western parts of the Dolomites indenter, the western and central Tauern Window, and the northern Alpine margin and foreland lack significant seismicity. (2) The indenter boundaries are characterized by strike‐slip faulting. Based on earthquake and geodetic data, the western and northern indenter boundaries are active sinistral and dextral strike‐slip/oblique slip faults. (3) West and north of the indenter corner, we observe normal and strike‐slip faulting in an up to 70 km‐wide zone. From west to east, the minimum horizontal stress rotates clockwise about 10–20°, from NE to ENE. (4) North of (3), east of the Swiss/Austrian border, we find evidence for N to NNW directed thrust faulting, and local orogen‐parallel extension. From our results and geodetic data, we infer that relative to a fixed northern foreland, NNW directed indentation is transferred at depth via the Sub‐Tauern thrust system to this 100‐km‐wide zone of localized thrusting. A lack of evidence for major, active strike‐slip faulting north of the Tauern Window is in line with geodetic data, which show no significant velocity difference between the northern part of the Eastern Alps and their foreland.
- 18 December 2018
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 37 (12) , 4625-4654
Open AccessActive Seismotectonic Deformation in Front of the Dolomites Indenter, Eastern Alps
We use earthquake focal mechanisms to study present‐day deformation and stress in the western part of the Eastern European Alps. We define the following regions, based on seismicity and kinematically compatible focal mechanism types: (1) the northern and western parts of the Dolomites indenter, the western and central Tauern Window, and the northern Alpine margin and foreland lack significant seismicity. (2) The indenter boundaries are characterized by strike‐slip faulting. Based on earthquake and geodetic data, the western and northern indenter boundaries are active sinistral and dextral strike‐slip/oblique slip faults. (3) West and north of the indenter corner, we observe normal and strike‐slip faulting in an up to 70 km‐wide zone. From west to east, the minimum horizontal stress rotates clockwise about 10–20°, from NE to ENE. (4) North of (3), east of the Swiss/Austrian border, we find evidence for N to NNW directed thrust faulting, and local orogen‐parallel extension. From our results and geodetic data, we infer that relative to a fixed northern foreland, NNW directed indentation is transferred at depth via the Sub‐Tauern thrust system to this 100‐km‐wide zone of localized thrusting. A lack of evidence for major, active strike‐slip faulting north of the Tauern Window is in line with geodetic data, which show no significant velocity difference between the northern part of the Eastern Alps and their foreland.
- Open Access
- 27 August 2014
- Published by Copernicus GmbH in Advances in Geosciences
- Vol. 36, 77-80
The 2013 Earthquake Series in the Southern Vienna Basin: location
Eastern Austria is a region of low to moderate seismicity, and hence the seismological network coverage is relatively sparse. Nevertheless accurate earthquake location is very important, as the area is one of the most densely populated and most developed areas in Austria. In 2013 a series of earthquakes with magnitudes up to 4.2 was recorded in the Southern Vienna Basin. With portable broadband, semi-permanent, and permanent installed seismic sensors from different institutions it was possible to record the main- and aftershocks with an unusual multitude of close-by seismic stations. In this study we combine records from all available stations up to 240 km distance in one dataset. First, we stabilize the location with three stations deployed in the epicentral area. The higher network density moves the location of smaller magnitude events closer to the main shocks, with respect to preliminary locations achieved by permanent and semi-permanent networks. Then we locate with NonLinLoc using consistent picks, a 3-D velocity model and apply station corrections. This second approach results in stable epicenters, for limited and even changing station availability. This dataset can then be inspected more closely for the presence of regional phases, which then can be used for more accurate localizations and especially depth estimation. Further research will address directivity effects and the asymmetry in earthquake intensity observed throughout the area, using double differences and cross-correlations.
- 27 August 2014
- Published by Copernicus GmbH in Advances in Geosciences
- Vol. 36, 77-80
Open AccessThe 2013 Earthquake Series in the Southern Vienna Basin: location
Eastern Austria is a region of low to moderate seismicity, and hence the seismological network coverage is relatively sparse. Nevertheless accurate earthquake location is very important, as the area is one of the most densely populated and most developed areas in Austria. In 2013 a series of earthquakes with magnitudes up to 4.2 was recorded in the Southern Vienna Basin. With portable broadband, semi-permanent, and permanent installed seismic sensors from different institutions it was possible to record the main- and aftershocks with an unusual multitude of close-by seismic stations. In this study we combine records from all available stations up to 240 km distance in one dataset. First, we stabilize the location with three stations deployed in the epicentral area. The higher network density moves the location of smaller magnitude events closer to the main shocks, with respect to preliminary locations achieved by permanent and semi-permanent networks. Then we locate with NonLinLoc using consistent picks, a 3-D velocity model and apply station corrections. This second approach results in stable epicenters, for limited and even changing station availability. This dataset can then be inspected more closely for the presence of regional phases, which then can be used for more accurate localizations and especially depth estimation. Further research will address directivity effects and the asymmetry in earthquake intensity observed throughout the area, using double differences and cross-correlations.
- Open Access
- 13 April 2011
- Published by Copernicus GmbH in The Cryosphere
- Vol. 5 (2) , 329-340
Imaging the structure of cave ice by ground-penetrating radar
Several caves in high elevated alpine regions host up to several meters thick ice. The age of the ice may exceed some hundreds or thousands of years. However, structure, formation and development of the ice are not fully understood and are subject to relatively recent investigation. The application of ground-penetrating radar (GPR) enables to determine thickness, volume, basal and internal structure of the ice and provides as such important constraints for related studies. We present results from four caves located in the Northern Calcareous Alps of Austria. We show that the ice is far from being uniform. The base has variable reflection signatures, which is related to the type and size of underlying debris. The internal structure of the cave ice is characterized by banded reflections. These reflection signatures are interpreted as thin layers of sediments and might help to understand the ice formation by representing isochrones. Overall, the relatively low electromagnetic wave speed suggests that the ice is temperate, and that a liquid water content of about 2% is distributed homogenously in the ice.
- 13 April 2011
- Published by Copernicus GmbH in The Cryosphere
- Vol. 5 (2) , 329-340
Open AccessImaging the structure of cave ice by ground-penetrating radar
Several caves in high elevated alpine regions host up to several meters thick ice. The age of the ice may exceed some hundreds or thousands of years. However, structure, formation and development of the ice are not fully understood and are subject to relatively recent investigation. The application of ground-penetrating radar (GPR) enables to determine thickness, volume, basal and internal structure of the ice and provides as such important constraints for related studies. We present results from four caves located in the Northern Calcareous Alps of Austria. We show that the ice is far from being uniform. The base has variable reflection signatures, which is related to the type and size of underlying debris. The internal structure of the cave ice is characterized by banded reflections. These reflection signatures are interpreted as thin layers of sediments and might help to understand the ice formation by representing isochrones. Overall, the relatively low electromagnetic wave speed suggests that the ice is temperate, and that a liquid water content of about 2% is distributed homogenously in the ice.
- 1 January 2010
- Published by International Glaciological Society in Journal of Glaciology
- Vol. 56 (199) , 843-853
Atmospheric warming threatens the untapped glacial archive of Ortles mountain, South Tyrol
Ortles mountain (3905 m a.s.l.), South Tyrol, Italy, is the highest mountain of the Eastern European Alps, and its upper glacier, Alto dell’Ortles, presents a unique opportunity to obtain the first paleoenvironmental record from an ice core in this area. To study the suitability of this glacier as a drilling site, in 2009 we performed the first preliminary study of its glaciological characteristics at ˜3830 m a.s.l. The maximum thickness is ˜75 m, and lamination of the exposed ice layers is excellent down to bedrock. Firn and ice lenses were observed in a 10 m shallow core, and the firn/ice transition was below ˜24m. The seasonal chemical signal is clearly preserved only within the uppermost 2008 and 2009 snow/firn. A simple mass-balance model, the incipient ‘smoothing’ of the chemical record, and the observed ice lenses provide evidence that melting, infiltration and refreezing cycles occurred within the firn layers formed before 2008. Nevertheless, the mass balance of the upper part of Alto dell’Ortles was positive (˜800mma_1) during the last few years. We suggest that an environmental history is likely to be well preserved only within the ice layers formed before ˜1980, when summer air temperature was ˜2°C colder than today in this area. Clearly the continued warming trend predicted to occur over the next few decades, and the consequent increase in frequency and/or intensity of infiltration processes, will endanger the preservation of the glacial archive conserved in the deep ice layers of Ortles mountain.
- 1 January 2010
- Published by International Glaciological Society in Journal of Glaciology
- Vol. 56 (199) , 843-853
Atmospheric warming threatens the untapped glacial archive of Ortles mountain, South Tyrol
Ortles mountain (3905 m a.s.l.), South Tyrol, Italy, is the highest mountain of the Eastern European Alps, and its upper glacier, Alto dell’Ortles, presents a unique opportunity to obtain the first paleoenvironmental record from an ice core in this area. To study the suitability of this glacier as a drilling site, in 2009 we performed the first preliminary study of its glaciological characteristics at ˜3830 m a.s.l. The maximum thickness is ˜75 m, and lamination of the exposed ice layers is excellent down to bedrock. Firn and ice lenses were observed in a 10 m shallow core, and the firn/ice transition was below ˜24m. The seasonal chemical signal is clearly preserved only within the uppermost 2008 and 2009 snow/firn. A simple mass-balance model, the incipient ‘smoothing’ of the chemical record, and the observed ice lenses provide evidence that melting, infiltration and refreezing cycles occurred within the firn layers formed before 2008. Nevertheless, the mass balance of the upper part of Alto dell’Ortles was positive (˜800mma_1) during the last few years. We suggest that an environmental history is likely to be well preserved only within the ice layers formed before ˜1980, when summer air temperature was ˜2°C colder than today in this area. Clearly the continued warming trend predicted to occur over the next few decades, and the consequent increase in frequency and/or intensity of infiltration processes, will endanger the preservation of the glacial archive conserved in the deep ice layers of Ortles mountain.
- 1 October 2007
- Published by Wiley in Permafrost and Periglacial Processes
- Vol. 18 (4) , 351-367
Internal structure and ice content of Reichenkar rock glacier (Stubai Alps, Austria) assessed by geophysical investigations
The Reichenkar rock glacier (Tyrol, Austria) is a typical tongue‐shaped, 1400 m long, ice‐cored active rock glacier, which connects to a debris‐free cirque glacier. Aerial photographs from 1954 and 1990 indicate its mean surface velocity to be 0.6 m/a while a photograph from 2003 and annual global positioning system (GPS) measurements since 1998 show that velocities in the past decade have increased to 3 m/a. Integration of ground‐penetrating radar (GPR), seismic and gravimetric data reveals that the Reichenkar rock glacier consists of four layers. The uppermost debris layer has an average thickness of about 5 m and is underlain by ice‐rich permafrost with an average thickness of about 25 m. A prominent reflector detected by GPR is identified as the top of an unfrozen till layer located a few metres above the bedrock. Seismic refraction data clearly indicate the boundary between till and bedrock. The geophysical interpretation shows that the ice‐rich permafrost of the rock glacier has an ice content of 45–60%, depending on assumptions concerning the air content of the ice. Creep velocities calculated from the geophysical model, ice contents and an extension of Glen's flow law are in good accordance with observed surface velocities. Copyright © 2007 John Wiley & Sons, Ltd.
- 1 October 2007
- Published by Wiley in Permafrost and Periglacial Processes
- Vol. 18 (4) , 351-367
Internal structure and ice content of Reichenkar rock glacier (Stubai Alps, Austria) assessed by geophysical investigations
The Reichenkar rock glacier (Tyrol, Austria) is a typical tongue‐shaped, 1400 m long, ice‐cored active rock glacier, which connects to a debris‐free cirque glacier. Aerial photographs from 1954 and 1990 indicate its mean surface velocity to be 0.6 m/a while a photograph from 2003 and annual global positioning system (GPS) measurements since 1998 show that velocities in the past decade have increased to 3 m/a. Integration of ground‐penetrating radar (GPR), seismic and gravimetric data reveals that the Reichenkar rock glacier consists of four layers. The uppermost debris layer has an average thickness of about 5 m and is underlain by ice‐rich permafrost with an average thickness of about 25 m. A prominent reflector detected by GPR is identified as the top of an unfrozen till layer located a few metres above the bedrock. Seismic refraction data clearly indicate the boundary between till and bedrock. The geophysical interpretation shows that the ice‐rich permafrost of the rock glacier has an ice content of 45–60%, depending on assumptions concerning the air content of the ice. Creep velocities calculated from the geophysical model, ice contents and an extension of Glen's flow law are in good accordance with observed surface velocities. Copyright © 2007 John Wiley & Sons, Ltd.