Wolfgang Lenhardt
Research Subjects
Wolfgang Lenhardt has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Damiano Pesaresi
OGS (Istituto Nazionale di Oceanografia e di Geofisica Sperimentale), Trieste, Italy
4 shared publications - Elisa Buforn
Department of Earth Physics and Astrophysics, Universidad Complutense de Madrid, 28040 Madrid, Spain
3 shared publications - Helmut Hausmann
Austrian Seismological Service, GeoSphere Austria, Vienna, Austria
3 shared publications - Maria-Theresia Apoloner
Zentralanstalt für Meteorologie und Geodynamik (ZAMG), Vienna, Austria
3 shared publications - Maurizio Mattesini
Department of Earth Physics and Astrophysics, Universidad Complutense de Madrid, 28040 Madrid, Spain
3 shared publications - Aldo Zollo
Dipartimento di Fisica “Ettore Pancini”, Università degli Studi di Napoli, “Federico II”, Naples, Italy
2 shared publications
Latest Publications
- Open Access
- 18 August 2026
- Published by Springer Nature in Journal of Seismology
- Vol. 30 (5) , 81
Empirical ground motion equations for the Eastern Alps, Austria
- 18 August 2026
- Published by Springer Nature in Journal of Seismology
- Vol. 30 (5) , 81
Open AccessEmpirical ground motion equations for the Eastern Alps, Austria
- 6 December 2024
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 115 (1) , 130-139
The Unusual Seismic Activity from 2021 to 2024 in Eastern Austria: Insights from Seismic Sequences Relocation and Moment Tensor Inversion
From 2021 to 2024, unusually strong seismic activity, including multiple sequences with five 3.8≤ML≤4.6 shocks, struck the Vienna basin and Mur-Mürz fault systems in Eastern Austria. Three earthquakes (ML 4.6, 4.5, and 3.8) occurred between March and May 2021. These earthquakes were followed by an increase in seismic activity in March 2023, with an ML 4.3 earthquake to the southwest of the 2021 events. In February 2024, an ML 4.5 earthquake occurred 10 km southwest of the ML 4.3 in 2023. We investigate activated faults relying on nonlinear relocations of the seismic sequences and probabilistic moment tensor inversion. The seismic sequences’ temporal evolution indicates a migration of seismic activity and a decrease of focal depths from northeast to southwest, suggesting a potential reactivation of the major fault systems in the region. The joint interpretation of the results shows distinct clusters along fault segments and focal mechanisms that match the region’s complex tectonic activity.
- 6 December 2024
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 115 (1) , 130-139
The Unusual Seismic Activity from 2021 to 2024 in Eastern Austria: Insights from Seismic Sequences Relocation and Moment Tensor Inversion
From 2021 to 2024, unusually strong seismic activity, including multiple sequences with five 3.8≤ML≤4.6 shocks, struck the Vienna basin and Mur-Mürz fault systems in Eastern Austria. Three earthquakes (ML 4.6, 4.5, and 3.8) occurred between March and May 2021. These earthquakes were followed by an increase in seismic activity in March 2023, with an ML 4.3 earthquake to the southwest of the 2021 events. In February 2024, an ML 4.5 earthquake occurred 10 km southwest of the ML 4.3 in 2023. We investigate activated faults relying on nonlinear relocations of the seismic sequences and probabilistic moment tensor inversion. The seismic sequences’ temporal evolution indicates a migration of seismic activity and a decrease of focal depths from northeast to southwest, suggesting a potential reactivation of the major fault systems in the region. The joint interpretation of the results shows distinct clusters along fault segments and focal mechanisms that match the region’s complex tectonic activity.
- Open Access
- 28 March 2022
- Published by Copernicus GmbH
Preliminary results of the two seismic sequences in the Vienna Basin in March and April 2021
We present a preliminary analysis of two seismic sequences between March and April 2021, near Neunkirchen and Gloggnitz, about 50 km from Vienna, Austria, and around 15 km apart from each other. Despite the moderate magnitudes, the recent earthquakes in the epicentral region, in the southern part of the Vienna Basin, were felt in the epicentral region and up to a distance of 300 km away. The Neunkirchen sequence started on March 11th, 2021. According to the Austrian Seismological Service at ZAMG, the last recorded earthquake occurred on May 12th, 2021. Over 245 earthquakes, with local magnitudes ranging from 0.5 to 4.6, were recorded until mid of May 2021. Out of the 245 earthquakes, 21 were felt by the population (1.8 ≤ ML ≤ 4.6), and two of them (ML4.6 and ML4.4) caused minor damage in the epicentral region. According to the Austrian Seismological Service, the depths of this sequence ranged from 7 to 12 km. The Gloggnitz sequence started on April 1st, 2021, and continued until May 8th, 2021. The epicenters of 65 detected earthquakes were located. Four earthquakes were felt, from which two (ML3.6 on April 20th and ML3.8 on April 23rd) caused slight damage. The local magnitudes of this seismic sequence ranged from -0.3 to 3.8; depths varied between 4 and 7 km. The relocation of the earthquakes of both sequences was carried out using the NonLinLoc by Lomax et al. (2019). We obtained the ellipse error for all relocated earthquakes. The focal mechanisms of the largest earthquakes were calculated using Seismic Moment-Tensor-Inversion. For the remaining events, a joint fault-plane solution was investigated. Furthermore, we compiled and analyzed the macro-seismic questionnaires of all felt earthquakes in the series and produced intensity maps (EMS-98). We compared the intensity attenuation as a function of distance with the newly available data and derived an Intensity Prediction Equation (IPE) for the region.
- 28 March 2022
- Published by Copernicus GmbH
Open AccessPreliminary results of the two seismic sequences in the Vienna Basin in March and April 2021
We present a preliminary analysis of two seismic sequences between March and April 2021, near Neunkirchen and Gloggnitz, about 50 km from Vienna, Austria, and around 15 km apart from each other. Despite the moderate magnitudes, the recent earthquakes in the epicentral region, in the southern part of the Vienna Basin, were felt in the epicentral region and up to a distance of 300 km away. The Neunkirchen sequence started on March 11th, 2021. According to the Austrian Seismological Service at ZAMG, the last recorded earthquake occurred on May 12th, 2021. Over 245 earthquakes, with local magnitudes ranging from 0.5 to 4.6, were recorded until mid of May 2021. Out of the 245 earthquakes, 21 were felt by the population (1.8 ≤ ML ≤ 4.6), and two of them (ML4.6 and ML4.4) caused minor damage in the epicentral region. According to the Austrian Seismological Service, the depths of this sequence ranged from 7 to 12 km. The Gloggnitz sequence started on April 1st, 2021, and continued until May 8th, 2021. The epicenters of 65 detected earthquakes were located. Four earthquakes were felt, from which two (ML3.6 on April 20th and ML3.8 on April 23rd) caused slight damage. The local magnitudes of this seismic sequence ranged from -0.3 to 3.8; depths varied between 4 and 7 km. The relocation of the earthquakes of both sequences was carried out using the NonLinLoc by Lomax et al. (2019). We obtained the ellipse error for all relocated earthquakes. The focal mechanisms of the largest earthquakes were calculated using Seismic Moment-Tensor-Inversion. For the remaining events, a joint fault-plane solution was investigated. Furthermore, we compiled and analyzed the macro-seismic questionnaires of all felt earthquakes in the series and produced intensity maps (EMS-98). We compared the intensity attenuation as a function of distance with the newly available data and derived an Intensity Prediction Equation (IPE) for the region.
- Open Access
- 4 March 2021
- Published by Copernicus GmbH
Evaluation of 2 years seismic monitoring for geothermal development in Vienna, Austria
Possible geothermal water resources in the eastern part of Vienna could ideally provide hundreds of thousands of Viennese households with environmentally friendly heat and hot water. Currently, the potential of low-lying hot water resources in this area is being explored geologically and geophysically within the scope of the multi-disciplinary project GeoTief Explore 3D.For the development of geothermal projects, studies of historical seismicity and monitoring of current seismicity are basic requirements. Therefore, we deployed a seismic network consisting of four stations in the area of interest in 2019. After 2 years of recording, we search the data for previously undetected small magnitude local earthquakes. Also we evaluate the local background noise and its variability with time. Based on these results, we estimate site-specific detection thresholds within in the project area.
- 4 March 2021
- Published by Copernicus GmbH
Open AccessEvaluation of 2 years seismic monitoring for geothermal development in Vienna, Austria
Possible geothermal water resources in the eastern part of Vienna could ideally provide hundreds of thousands of Viennese households with environmentally friendly heat and hot water. Currently, the potential of low-lying hot water resources in this area is being explored geologically and geophysically within the scope of the multi-disciplinary project GeoTief Explore 3D.For the development of geothermal projects, studies of historical seismicity and monitoring of current seismicity are basic requirements. Therefore, we deployed a seismic network consisting of four stations in the area of interest in 2019. After 2 years of recording, we search the data for previously undetected small magnitude local earthquakes. Also we evaluate the local background noise and its variability with time. Based on these results, we estimate site-specific detection thresholds within in the project area.
- Open Access
- 15 January 2021
- Published by Copernicus GmbH in History of Geo- and Space Sciences
- Vol. 12 (1) , 11-19
The history of the Geophysical Service of Austria
A brief summary will be given of the historical development of Geophysical Service of Austria, which comprises the national geomagnetic, gravimetric and seismological services as well as the “Applied Geophysics Section” located at the Zentralanstalt für Meteorologie und Geodynamik (ZAMG) in Vienna in Austria. The paper presents the achievements, changes and challenges of the Department from its modest beginning in 1851 until 2020. Finally, a special emphasis is placed on the Conrad Observatory – one of the most comprehensive geophysical research observatories in the world.
- 15 January 2021
- Published by Copernicus GmbH in History of Geo- and Space Sciences
- Vol. 12 (1) , 11-19
Open AccessThe history of the Geophysical Service of Austria
A brief summary will be given of the historical development of Geophysical Service of Austria, which comprises the national geomagnetic, gravimetric and seismological services as well as the “Applied Geophysics Section” located at the Zentralanstalt für Meteorologie und Geodynamik (ZAMG) in Vienna in Austria. The paper presents the achievements, changes and challenges of the Department from its modest beginning in 1851 until 2020. Finally, a special emphasis is placed on the Conrad Observatory – one of the most comprehensive geophysical research observatories in the world.
- Open Access
- 23 March 2020
- Published by Copernicus GmbH
Seismic hazard map of Austria
After 25 years, a new seismic hazard map for Austria was created. The improvements in the Probabilistic Seismic Hazard Assessment (PSHA) are based on expanded and updated catalog data with improved depth, source-mechanism and moment magnitudes. Locally adapted ground motion prediction equations (GMPE) were calculated by applying a least square adjustment to the local measurements. A neuronal networks approach was successfully tested. The final selection is carried out by using statistical parameters, like Log-Likelihood and Euclidean Distance Range. Verified calculation methods, like Bayesian Penalized Maximum Likelihood and modified Gutenberg Richter, were used. The uncertainties have been considered by using the covariance matrix according to Stromeyer (2015). The PSHA approach combines a model of seismic zones (area sources), which is composed of zones and superzones, a zone-free model (smoothed seismicity) and a model with geological fault zones. A logic tree function was used to merge the models, the maximum magnitudes (by EPRI-Approach) and the GMPE. The calculations were carried out with the Openquake software framework. The results were compared with the current norm and the results of neighboring countries. Furthermore, the uniform hazard spectra were compared with the new Eurocode draft.
- 23 March 2020
- Published by Copernicus GmbH
Open AccessSeismic hazard map of Austria
After 25 years, a new seismic hazard map for Austria was created. The improvements in the Probabilistic Seismic Hazard Assessment (PSHA) are based on expanded and updated catalog data with improved depth, source-mechanism and moment magnitudes. Locally adapted ground motion prediction equations (GMPE) were calculated by applying a least square adjustment to the local measurements. A neuronal networks approach was successfully tested. The final selection is carried out by using statistical parameters, like Log-Likelihood and Euclidean Distance Range. Verified calculation methods, like Bayesian Penalized Maximum Likelihood and modified Gutenberg Richter, were used. The uncertainties have been considered by using the covariance matrix according to Stromeyer (2015). The PSHA approach combines a model of seismic zones (area sources), which is composed of zones and superzones, a zone-free model (smoothed seismicity) and a model with geological fault zones. A logic tree function was used to merge the models, the maximum magnitudes (by EPRI-Approach) and the GMPE. The calculations were carried out with the Openquake software framework. The results were compared with the current norm and the results of neighboring countries. Furthermore, the uniform hazard spectra were compared with the new Eurocode draft.
- Open Access
- 23 March 2020
- Published by Copernicus GmbH
Intensity Prediction Equation for Austria: Applications and analysis
We present the results of the intensity prediction equation for Austria as a function of moment magnitude, focal depth and hypocentral distance from the source. This equation aims to be simple and correct to generate shakemaps in near-real-time for crisis management and risk assessment in terms of the impact of an earthquake. Before the model computation, the dataset was carefully selected from the Austrian Earthquake Catalogue (AEC). Then, the model was derived through two Ordinary Least Square Adjustments; the first one was used to calibrate the epicentral intensity, whereas the second one aimed to derive an intensity attenuation law. Additionally, first own-approach to remove local site effects was used to refine the model. In total, the used dataset includes 42 earthquakes befalling in Austria and border regions between 2004 and 2018. Their local magnitude varies between 3.0 and 5.4. In total, 3,214 IDPs with intensity values between III and VII-VIII (EMS-98) were used.Applications and analysis of the model will be presented. Furthermore, first results to an Austrian hazard map based on intensities will be introduced.
- 23 March 2020
- Published by Copernicus GmbH
Open AccessIntensity Prediction Equation for Austria: Applications and analysis
We present the results of the intensity prediction equation for Austria as a function of moment magnitude, focal depth and hypocentral distance from the source. This equation aims to be simple and correct to generate shakemaps in near-real-time for crisis management and risk assessment in terms of the impact of an earthquake. Before the model computation, the dataset was carefully selected from the Austrian Earthquake Catalogue (AEC). Then, the model was derived through two Ordinary Least Square Adjustments; the first one was used to calibrate the epicentral intensity, whereas the second one aimed to derive an intensity attenuation law. Additionally, first own-approach to remove local site effects was used to refine the model. In total, the used dataset includes 42 earthquakes befalling in Austria and border regions between 2004 and 2018. Their local magnitude varies between 3.0 and 5.4. In total, 3,214 IDPs with intensity values between III and VII-VIII (EMS-98) were used.Applications and analysis of the model will be presented. Furthermore, first results to an Austrian hazard map based on intensities will be introduced.
- Open Access
- 18 December 2018
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 37 (12) , 4625-4654
Active Seismotectonic Deformation in Front of the Dolomites Indenter, Eastern Alps
We use earthquake focal mechanisms to study present‐day deformation and stress in the western part of the Eastern European Alps. We define the following regions, based on seismicity and kinematically compatible focal mechanism types: (1) the northern and western parts of the Dolomites indenter, the western and central Tauern Window, and the northern Alpine margin and foreland lack significant seismicity. (2) The indenter boundaries are characterized by strike‐slip faulting. Based on earthquake and geodetic data, the western and northern indenter boundaries are active sinistral and dextral strike‐slip/oblique slip faults. (3) West and north of the indenter corner, we observe normal and strike‐slip faulting in an up to 70 km‐wide zone. From west to east, the minimum horizontal stress rotates clockwise about 10–20°, from NE to ENE. (4) North of (3), east of the Swiss/Austrian border, we find evidence for N to NNW directed thrust faulting, and local orogen‐parallel extension. From our results and geodetic data, we infer that relative to a fixed northern foreland, NNW directed indentation is transferred at depth via the Sub‐Tauern thrust system to this 100‐km‐wide zone of localized thrusting. A lack of evidence for major, active strike‐slip faulting north of the Tauern Window is in line with geodetic data, which show no significant velocity difference between the northern part of the Eastern Alps and their foreland.
- 18 December 2018
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 37 (12) , 4625-4654
Open AccessActive Seismotectonic Deformation in Front of the Dolomites Indenter, Eastern Alps
We use earthquake focal mechanisms to study present‐day deformation and stress in the western part of the Eastern European Alps. We define the following regions, based on seismicity and kinematically compatible focal mechanism types: (1) the northern and western parts of the Dolomites indenter, the western and central Tauern Window, and the northern Alpine margin and foreland lack significant seismicity. (2) The indenter boundaries are characterized by strike‐slip faulting. Based on earthquake and geodetic data, the western and northern indenter boundaries are active sinistral and dextral strike‐slip/oblique slip faults. (3) West and north of the indenter corner, we observe normal and strike‐slip faulting in an up to 70 km‐wide zone. From west to east, the minimum horizontal stress rotates clockwise about 10–20°, from NE to ENE. (4) North of (3), east of the Swiss/Austrian border, we find evidence for N to NNW directed thrust faulting, and local orogen‐parallel extension. From our results and geodetic data, we infer that relative to a fixed northern foreland, NNW directed indentation is transferred at depth via the Sub‐Tauern thrust system to this 100‐km‐wide zone of localized thrusting. A lack of evidence for major, active strike‐slip faulting north of the Tauern Window is in line with geodetic data, which show no significant velocity difference between the northern part of the Eastern Alps and their foreland.
- Open Access
- 29 October 2018
- Published by Copernicus GmbH in Earth Surface Dynamics
- Vol. 6 (4) , 955-970
Seismic detection of rockslides at regional scale: examples from the Eastern Alps and feasibility of kurtosis-based event location
Seismic records can provide detailed insight into the mechanisms of gravitational mass movements. Catastrophic events that generate long-period seismic radiation have been studied in detail, and monitoring systems have been developed for applications on a very local scale. Here we demonstrate that similar techniques can also be applied to regional seismic networks, which show great potential for real-time and large-scale monitoring and analysis of rockslide activity. This paper studies 19 moderate-sized to large rockslides in the Eastern Alps that were recorded by regional seismic networks within distances of a few tens of kilometers to more than 200 km. We develop a simple and fully automatic processing chain that detects, locates, and classifies rockslides based on vertical-component seismic records. We show that a kurtosis-based onset picker is suitable to detect the very emergent onsets of rockslide signals and to locate the rockslides within a few kilometers from the true origin using a grid search and a 1-D seismic velocity model. Automatic discrimination between rockslides and local earthquakes is possible by a combination of characteristic parameters extracted from the seismic records, such as kurtosis or maximum-to-mean amplitude ratios. We attempt to relate the amplitude of the seismic records to the documented rockslide volume and reveal a potential power law in agreement with earlier studies. Since our approach is based on simplified methods we suggest and discuss how each step of the automatic processing could be expanded and improved to achieve more detailed results in the future.
- 29 October 2018
- Published by Copernicus GmbH in Earth Surface Dynamics
- Vol. 6 (4) , 955-970
Open AccessSeismic detection of rockslides at regional scale: examples from the Eastern Alps and feasibility of kurtosis-based event location
Seismic records can provide detailed insight into the mechanisms of gravitational mass movements. Catastrophic events that generate long-period seismic radiation have been studied in detail, and monitoring systems have been developed for applications on a very local scale. Here we demonstrate that similar techniques can also be applied to regional seismic networks, which show great potential for real-time and large-scale monitoring and analysis of rockslide activity. This paper studies 19 moderate-sized to large rockslides in the Eastern Alps that were recorded by regional seismic networks within distances of a few tens of kilometers to more than 200 km. We develop a simple and fully automatic processing chain that detects, locates, and classifies rockslides based on vertical-component seismic records. We show that a kurtosis-based onset picker is suitable to detect the very emergent onsets of rockslide signals and to locate the rockslides within a few kilometers from the true origin using a grid search and a 1-D seismic velocity model. Automatic discrimination between rockslides and local earthquakes is possible by a combination of characteristic parameters extracted from the seismic records, such as kurtosis or maximum-to-mean amplitude ratios. We attempt to relate the amplitude of the seismic records to the documented rockslide volume and reveal a potential power law in agreement with earlier studies. Since our approach is based on simplified methods we suggest and discuss how each step of the automatic processing could be expanded and improved to achieve more detailed results in the future.
- Open Access
- 10 July 2018
- Published by Copernicus GmbH in EGUsphere
- Vol. 2018, 1-24
Seismic detection of rockslides at regional scale: Examples from the Eastern Alps and feasibility of kurtosis-based event location
Seismic records can provide detailed insight into the mechanisms of gravitational mass movements. Catastrophic events that generate long-period seismic radiation have been studied in detail, and monitoring systems have been developed for applications on very local scale. Here we demonstrate that similar techniques can also be applied to regional seismic networks which show great potential for real-time and large-scale monitoring and analysis of rockslide activity. This manuscript studies 21 moderate-size to large rockslides in the Eastern Alps that were recorded by regional seismic networks within distances of few tens of kilometers to more than 200 km. We develop a simple and fully automatic processing chain that detects, locates, and classifies rockslides based on vertical-component seismic records. We show that a kurtosis-based onset picker is suitable to detect the very emergent onsets of rockslide signals, and to locate the rockslides within a few kilometers from the true origin, using a grid search and a 1D seismic velocity model. Automatic discrimination between rockslides and local earthquakes is possible by a combination of characteristic parameters extracted from the seismic records, such as kurtosis or maximum-to-mean amplitude ratios. We attempt to relate the amplitude of the seismic records with the documented rockslide volume and reveal a potential power-law in agreement with earlier studies. Since our approach is based on simplified methods we suggest and discuss how each step of the automatic processing could be expanded and improved to achieve more detailed results in the future.
- 10 July 2018
- Published by Copernicus GmbH in EGUsphere
- Vol. 2018, 1-24
Open AccessSeismic detection of rockslides at regional scale: Examples from the Eastern Alps and feasibility of kurtosis-based event location
Seismic records can provide detailed insight into the mechanisms of gravitational mass movements. Catastrophic events that generate long-period seismic radiation have been studied in detail, and monitoring systems have been developed for applications on very local scale. Here we demonstrate that similar techniques can also be applied to regional seismic networks which show great potential for real-time and large-scale monitoring and analysis of rockslide activity. This manuscript studies 21 moderate-size to large rockslides in the Eastern Alps that were recorded by regional seismic networks within distances of few tens of kilometers to more than 200 km. We develop a simple and fully automatic processing chain that detects, locates, and classifies rockslides based on vertical-component seismic records. We show that a kurtosis-based onset picker is suitable to detect the very emergent onsets of rockslide signals, and to locate the rockslides within a few kilometers from the true origin, using a grid search and a 1D seismic velocity model. Automatic discrimination between rockslides and local earthquakes is possible by a combination of characteristic parameters extracted from the seismic records, such as kurtosis or maximum-to-mean amplitude ratios. We attempt to relate the amplitude of the seismic records with the documented rockslide volume and reveal a potential power-law in agreement with earlier studies. Since our approach is based on simplified methods we suggest and discuss how each step of the automatic processing could be expanded and improved to achieve more detailed results in the future.