AAAndrés Alvarado

Andrés Alvarado

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andrés Alvarado has a total of 91 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Limnological Characteristics and Relationships with Primary Productivity in Two High Andean Hydroelectric Reservoirs in Ecuador

    by Gonzalo Sotomayor, Andrés Alvarado, Jorge Romero, Carlos López, Marta Aguilar, Marie Anne Eurie Forio, Peter L. M. Goethals

    Studies on limnology are essential to reservoir management; nevertheless, few are known about the limnological features of the Andean reservoirs in Ecuador. To overcome this limitation in the information, from December 2018 to December 2019, the limnological characteristics of El Labrado and Chanlud reservoirs in the Machángara river basin (Ecuador south) were examined. Using the light/dark bottles technique, the primary productivity (PP) of phytoplankton was studied in conjunction with (1) vertical profiles of oxygen concentrations, water temperature, nitrogen, phosphorus, alkalinity, and heterotrophic bacteria; (2) Secchi disk transparency; and (3) meteorological factors such as wind force, precipitation, and water level. Data indicate that both reservoirs are polymictic, with alkaline waters, low nutrients, and low PP rates. Despite this, a principal component analysis revealed that Chanlud exhibits higher nitrogen, alkalinity, heterotrophic bacteria, and PP values. In two approaches through multiple linear regression analysis, each per reservoir, the PP was explained mainly by water temperature, depth, light, heterotrophic bacteria, and meteorological parameters. The low concentrations of nutrients and the low residency time explain the low PP values. Likewise, the altitudinal factor (i.e., both reservoirs are 3400 m above sea level) and the low human perturbations in surrounding reservoir zones play a crucial role in explaining their poor PP. Notwithstanding the low metabolic rates, clear seasonal trends were observed in both reservoirs; the lowest PP rates occurred during the cold season. To our knowledge, this is the first limnological study of high Andean reservoirs in Ecuador. These findings should be part of Andean reservoir management protocols, contributing significantly to local conservation efforts. Additionally, they could be extrapolated as a frame of reference to similar eco-hydrological systems.


  • Open Access

    Septic tank usage and its faecal sludge management in Cuenca, Ecuador

    by María Belén Arévalo-Durazno, Daniela Ballari, Andrés Alvarado

    On-site sanitation systems such as septic tanks are widely used for treating domestic wastewater in urban and rural areas which lack sewage systems. However, a large portion of these systems do not properly treat human excreta. A main challenge to improve this is the absence of comprehensive data regarding the usage, emptying and maintenance. In this study, records of septic tank desludging frequency during 2009–2022 and the sewerage coverage updated to 2022 were used to investigate their spatial and temporal utilisation, and the persistence of septic tank usage in areas with sewer networks and uncover the current state of Faecal Sludge Management in Cuenca, Ecuador. The spatial behaviour revealed that OSSs are still in use besides the presence of a sewer network. In 2022, there were 109 septic tanks in urban areas with 14.7% in sectors with sewerage service. In rural areas, 469 septic tanks were recorded with 7.8% situated in areas with sewer networks. Although there is no specialised infrastructure in place for the treatment and disposal of faecal sludge, the city has effectively managed it with the existing sanitation facilities. This assessment contributes to the formulation of a secure framework for a safely managed sanitation.

  • Open Access

    Performance of modified first-stage French Vertical Flow Constructed Wetlands under extreme operational conditions

    by María Belén Arévalo-Durazno, Jorge Alejandro García Zumalacarregui, Long Ho, Andrea Narváez, Andrés Alvarado

    Operation conditions considerably affect the removal efficiency of wastewater treatment systems, and yet we still lack data on how these systems function under extreme dilution rates and climatic conditions at high altitudes. Here, we applied two modified First-Stage French Vertical Flow Constructed Wetlands (FS-FVFCWs) for sewage treatment in Northern Tropical Andes. Specifically, within 18 months, we conducted a pilot-scale experiment at two hydraulic loading rates (HLRs) of 0.94 and 0.56 m d−1, representing 2.5 and 1.5 times the recommended design values, with two different feeding/resting periods to investigate the impact of HLRs and operational strategy on system performance. We found that chemical oxygen demand (COD) and total suspended solids (TSS) removal was satisfactory, with average values of 53 ± 18 and 69 ± 16%, respectively. Moreover, reducing HLRs resulted in higher removal efficiency for COD, from 46 ± 15 to 64 ± 15%, but had no impact on TSS removal, with 3 days of feeding and 6 days of resting. For an equal time of feeding and resting, COD and TSS removals were not affected by the modified HLR. These findings suggest that high HLRs can be applied to FS-FVFCW without compromising the system operation and obtaining satisfactory results, leading to opportunities to reduce areas and costs.


  • Open Access

    Physics-Informed Neural Network water surface predictability for 1D steady-state open channel cases with different flow types and complex bed profile shapes

    by Sebastián Cedillo, Ana-Gabriela Núñez, Esteban Sánchez-Cordero, Luis Timbe, Esteban Samaniego, Andrés Alvarado

    The behavior of many physical systems is described by means of differential equations. These equations are usually derived from balance principles and certain modelling assumptions. For realistic situations, the solution of the associated initial boundary value problems requires the use of some discretization technique, such as finite differences or finite volumes. This research tackles the numerical solution of a 1D differential equation to predict water surface profiles in a river, as well as to estimate the so-called roughness parameter. A very important concern when solving this differential equation is the ability of the numerical model to capture different flow regimes, given that hydraulic jumps are likely to be observed. To approximate the solution, Physics-Informed Neural Networks (PINN) are used. Benchmark cases with different bed profile shapes, which induce different flows types (supercritical, subcritical, and mixed) are tested first. Then a real mountain river morphology, the so-called Step-pool, is studied. PINN models were implemented in Tensor Flow using two neural networks. Different numbers of layers and neurons per hidden layer, as well as different activation functions (AF), were tried. The best performing model for each AF (according to the loss function) was compared with the solution of a standard finite difference discretization of the steady-state 1D model (HEC-RAS model). PINN models show good predictability of water surface profiles for slowly varying flow cases. For a rapid varying flow, the location and length of the hydraulic jump is captured, but it is not identical to the HEC-RAS model. The predictability of the tumbling flow in the Step-pool was good. In addition, the solution of the estimation of the roughness parameter (which is an inverse problem) using PINN shows the potential of this methodology to calibrate this parameter with limited cross-sectional data. PINN has shown potential for its application in open channel studies with complex bed profiles and different flow types, having in mind, however, that emphasis must be given to architecture selection.


  • Open Access

    Patterns of Difference between Physical and 1-D Calibrated Effective Roughness Parameters in Mountain Rivers

    by Sebastián Cedillo, Esteban Sánchez-Cordero, Luis Timbe, Esteban Samaniego, Andrés Alvarado

    Due to the presence of boulders and different morphologies, mountain rivers contain various resistance sources. To correctly simulate river flow using 1-D hydrodynamic models, an accurate estimation of the flow resistance is required. In this article, a comparison between the physical roughness parameter (PRP) and effective roughness coefficient (ERC) is presented for three of the most typical morphological configurations in mountain rivers: cascade, step-pool, and plane-bed. The PRP and its variation were obtained through multiple measurements of field variables and an uncertainty analysis, while the ERC range was derived with a GLUE procedure implemented in HEC-RAS, a 1-D hydrodynamic model. In the GLUE experiments, two modes of the Representative Friction Slope Method (RFSM) between two cross-sections were tested, including the variation in the roughness parameter. The results revealed that the RFSM effect was limited to low flows in cascade and step-pool. Moreover, when HEC-RAS selected the RSFM, only acceptable results were presented for plane-bed. The difference between ERC and PRP depended on the flow magnitude and the morphology, and as shown in this study, when the flow increased, the ERC and PRP ranges approached each other and even overlapped in cascade and step-pool. This research aimed to improve the roughness value selection process in a 1-D model given the importance of this parameter in the predictability of the results. In addition, a comparison was presented between the results obtained with the numerical model and the values calculated with the field measurements


  • Open Access

    Hydrodynamic Evaluation of Five Influent Distribution Systems in a Cylindrical UASB Reactor Using CFD Simulations

    by Juan F. Cisneros, Fabiola Cobos, Manuel Raul Pelaez-Samaniego, Usman Rehman, Ingmar Nopens, Andrés Alvarado

    UASB reactors are a promising option for environmentally friendly wastewater treatment due to their reduced carbon footprint and their capacity to treat a variety of wastewater strengths, among other recognized advantages over alternative wastewater treatment systems. The Influent Distribution System (IDS) is a critical structure for generating granules in a UASB reactor since it provides the required flow hydrodynamics for their formation. Thus, the objective of this study was to evaluate and compare the efficiency of five IDS configurations to generate ideal granulation conditions using Computational Fluid Dynamics (CFD) simulations. The IDS configurations were as follows: (C1) single radial inflow, (C2) upward axial inflow, (C3) downward distributed axial inflow, and two novel configurations in the form of (C4) double opposite radial inflow and (C5) downward tangential inflow. The hydrodynamic response of configuration C1 was validated in a physical model with dynamic Froude similitude. The granulation measurement was velocity-based in the reactor reaction zone using steady-state CFD simulations. The novel IDS configuration C4 was the one that resulted in the highest granulation volume, with up to 45.5% of the potential granulation volume of the UASB reactor, in contrast to the IDS C2 that obtained the lowest granulation with only 10.8%. Results confirm that the IDS directly impacts the hydrodynamics of the reactor and that model-based design can be used to ascertain IDS configurations that better promote granulation in UASB reactors.


  • Exploratory Study of Physic Informed Deep Learning Applied to a Step-Pool for Different Flow Magnitudes

    by Sebastián Cedillo, Esteban Sánchez-Cordero, Esteban Samaniego, Andrés Alvarado


  • Modified First Stage of French Vertical Flow Constructed Wetlands for Wastewater Treatment in Highlands: Start-Up of the System

    by María B. Arévalo-Durazno, Jorge A. García Zumalacarregui, Andrea Narváez, Andrés Alvarado

  • Open Access

    Resistance Analysis of Morphologies in Headwater Mountain Streams

    by Sebastián Cedillo, Esteban Sánchez-Cordero, Luis Timbe, Esteban Samaniego, Andrés Alvarado

    River flow velocity is determined by the energy available for flow motion and the energy fraction lost by flow resistance. We compared the performance of different equations for the Darcy-Weisbach resistance coefficient (f) and empirical equations to predict flow velocity. The set of equations was tested using data from the Quinuas headwater mountain river in the Andean region. The data was collected in three Cascades, two Step-pools, and one Plane-bed covering a wide range of velocity magnitudes. The results reveal that nondimensional hydraulic geometry equations (NDHG) with a Nash-Sutcliffe efficiency index (EF) varying from 0.6–0.85 provide the most accurate velocity prediction. Furthermore, the study proposes a methodology applicable to all morphologies for defining the NDHG parameters using easily measured field data. The results show an improvement in predictability with EF values in the range of 0.81–0.86. Moreover, the methodology was tested against data from the literature, which was not divided into morphologies providing EF values of around 0.9. The authors encourage the application of the presented methodology to other reaches to obtain additional data about the NDHG parameters. Our findings suggest that those parameters could be related to reach characteristics (e.g., certain characteristic grain size), and in that case, the methodology could be useful in ungauged streams.


  • Open Access

    Adsorption of Estradiol by Natural Clays and Daphnia magna as Biological Filter in an Aqueous Mixture with Emerging Contaminants

    by Andrés Pérez-González, Verónica Pinos-Vélez, Isabel Cipriani-Avila, Mariana Capparelli, Eliza Jara-Negrete, Andrés Alvarado, Juan Fernando Cisneros, Piercosimo Tripaldi

    Among emerging pollutants, endocrine disruptors such as estradiol are of most concern. Conventional water treatment technologies are not capable of removing this compound from water. This study aims to assess a method that combines physicochemical and biological strategies to eliminate estradiol even when there are other compounds present in the water matrix. Na-montmorillonite, Ca-montmorillonite and zeolite were used to remove estradiol in a medium with sulfamethoxazole, triclosan, and nicotine using a Plackett–Burman experimental design; each treatment was followed by biological filtration with Daphnia magna. Results showed between 40 to 92% estradiol adsorption in clays; no other compounds present in the mixture were adsorbed. The most significant factors for estradiol adsorption were the presence of nicotine and triclosan which favored the adsorption, the use of Ca-montmorillonite, Zeolite, and time did not favor the adsorption of estradiol. After the physicochemical treatment, Daphnia magna was able to remove between 0–93% of the remaining estradiol. The combination of adsorption and biological filtration in optimal conditions allowed the removal of 98% of the initial estradiol concentration.