JPJoo Hyung Park

Joo Hyung Park

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Joo Hyung Park has a total of 119 co-authors. Here are the top co-authors by number of shared publications:

  • Ara Cho

    Photovoltaics Research Department Korea Institute of Energy Research Daejeon Republic of Korea

    9 shared publications
  • Jae Ho Yun

    Department of Energy Engineering Korea Institute of Energy Technology Naju Republic of Korea

    9 shared publications
  • Donghyeop Shin

    Photovoltaic Laboratory, Renewable Energy Institute, Korea Institute of Energy Research, 152 Gajeong-ro, Yuseong-gu, Daejeon 34125, Republic of Korea

    8 shared publications
  • Jihye Gwak

    Photovoltaics Research Department Korea Institute of Energy Research Daejeon Republic of Korea

    8 shared publications
  • Kihwan Kim

    Photovoltaics Research Department Korea Institute of Energy Research Daejeon Republic of Korea

    8 shared publications
  • Inyoung Jeong

    Photovoltaics Research Department Korea Institute of Energy Research (KIER) Daejeon Republic of Korea

    7 shared publications

Latest Publications

  • Rear‐Side ZnS Passivation With Spontaneous Local Point Contacts for Boosting Efficiency and Bifaciality in Ultrathin Semitransparent CuInSe 2 Solar Cells

    by Jin Gi An, Junseop Byeon, TaeWan Kim, Joo Hyung Park

    Bifacial semitransparent (BST) solar cells utilizing transparent conducting oxides are advantageous in various applications because of their controllable transparency, ease of use, and potential in bifacial power generation using the albedo effect. However, their power conversion efficiency (PCE) is limited owing to the ultrathin absorber layer, where rear‐side recombination may dominate. To suppress carrier recombination at the rear‐interface in ultrathin BST CuInSe 2 (CISe) solar cells, a direct passivation method is demonstrated, that is, a nanoscale ZnS layer is deposited between the rear‐side of the CISe absorber and an indium tin oxide (ITO) back contact using atomic layer deposition. The ZnS layer spontaneously forms localized holes by recrystallization during CISe co‐evaporation, which act as local direct conduction paths from the CISe to the ITO. The PCE of the BST‐CISe solar cells increases dramatically from 5.29% to 9.79% after applying the optimal 20‐nm ZnS layer. In addition, the passivation layer significantly reduces rear‐side carrier recombination and increases the bifaciality factor. The bifacial power‐generation density with rear‐side ZnS passivation increases to 11.4% and 17.8% under total illumination of 1.2 and 2.0 sun (considering the albedo effect), respectively.

  • Open Access

    Flexible Monolithic 2‐Terminal Kesterite Cu 2 ZnSnSe 4 /Perovskite Tandem Solar Cells

    by Muhammad Rehan, Hung Van Tran, Inyoung Jeong, Awet Mana Amare, Ara Cho, S. F. A. Shah, Afia Owusuah Akyaw, Sejin Ahn, Sungjun Hong, JunHo Kim, et al.

    Growing demand for flexible photovoltaics has intensified interest in high‐efficiency tandem solar cells. This study demonstrates flexible monolithic kesterite/perovskite tandems by addressing the poor morphology and limited long‐wavelength response of low‐bandgap kesterite bottom cells. To enable flexible and tandem device applications, high‐quality Cu 2 ZnSnSe 4 (CZTSe) films were grown at 480 °C using a low‐temperature, single‐step coevaporation process compatible with flexible polyimide (PI) substrates. The incorporation of Ag further enhances crystallization and enables the defect passivation in the CZTSe absorber layer. Admittance spectroscopy reveals that Ag incorporation reduces the defect density of states from 1.4 × 10 18 to 8.7 × 10 17 cm −3 eV −1 . Consequently, the single‐junction efficiency improves from 5.6% to 8.7% on glass and reaches 7.3% on flexible PI substrates. Integration with a perovskite top cell yields a tandem efficiency of 16.4% on glass and a record 11.35% on flexible PI. Furthermore, the flexible device retains ~70% of its initial efficiency after 1000 bending cycles. These results highlight the potential of Ag‐doped CZTSe fabricated via low‐temperature coevaporation for high‐performance, earth‐abundant, and flexible tandem photovoltaics.

  • Experimental Validation of Strong Proton Radiation Tolerance of Surface-Treated All-Inorganic CsPbI 3 Perovskite Solar Cells for Space Applications

    by Hongjae Shim, Ju Won Kim, Hyunsun Song, Tommy H. Richards, Mingrui He, Suyoung Jang, Jihoo Lim, Minwoo Lee, Yeeun Lee, Lei Wang, et al.

    The rapid expansion of space-based initiatives and the increasing deployment of satellites have intensified the demand for high-performance, radiation-tolerant photovoltaics (PV). This study investigates the radiation tolerance of all-inorganic CsPbI3 perovskites for space PV applications. Combining simulations and experimental evaluations, we compare the properties of CsPbI3 films depending on the surface treatments using long chain cations. Octylammonium iodide (OAI) treatment forms a quasi-2D perovskite structure, whereas phenethylammonium iodide (PEAI) induces a molecular cation layer. Under harsh proton irradiation (2 × 1014 protons/cm2 at 0.05 MeV), OAI-treated devices exhibited only a 19% efficiency reduction, significantly lower than the performance degradation observed in organic-inorganic hybrid perovskite PVs. Moreover, OAI treatment does not have adverse effects after irradiation, while the PEAI layer results in a severe deviation in surface electrical potential following irradiation. These findings suggest new directions for using all-inorganic PSCs in high-radiation environments, prompting further investigation into next-generation space PV technologies.


  • Interfacial Manipulation of Electron Transport Layer via Viologen Surface Treatment for Highly Stable and Efficient Inorganic Perovskite Solar Cells

    by Ju Won Kim, HyunHo Kim, Syed‐Fawad‐Ali Shah, Inyoung Jeong, Donghyeop Shin, Kihwan Kim, Soomin Song, Jun‐Sik Cho, Jihye Gwak, TaeWan Kim, et al.

    The stability and efficiency of inorganic perovskite solar cells (PSCs) remain limited owing to the presence of interfacial and bulk‐related defects. To address this issue, a multifunctional defect‐passivating interlayer can be introduced. In this study, 1,1′‐bis(3‐sulfonatopropyl)‐viologen (BSP‐Vi) was synthesized for depositing a multifunctional interlayer between a TiO 2 electron transport layer (ETL) and CsPbI 3 perovskite absorber. The sulfonate group in BSP‐Vi effectively interacts with both oxygen vacancies on the TiO 2 surface and undercoordinated Pb 2+ species in the perovskite, leading to substantial defect passivation in both the ETL and perovskite absorber. BSP‐Vi induces a favorable shift in interfacial energy levels and facilitates the formation of a perovskite film with improved crystallinity and reduced defect density. Consequently, the optimized PSC incorporating 0.2 wt% BSP‐Vi achieves a power conversion efficiency (PCE) of 16.93%, representing a marked increase from that of the control (PCE = 16.08%). The maximum power point tracking test demonstrates that the PSC with BSP‐Vi‐treated interlayer maintained 95% of the initial performance after 160 h of continuous operation. This study highlights the potential of introducing sulfonate‐group‐based materials at the ETL/perovskite interface as a promising route to simultaneously passivate defects in and enhance the efficiency and stability of inorganic perovskite photovoltaic devices.

  • Interface modification of the electron transport layer via a dry-processed conformal MgSnO x interlayer in inorganic CsPbI 3 perovskite solar cells for enhanced performance and stability

    by Ju Won Kim, Syed-Fawad-Ali Shah, Junseop Byeon, Donghyeop Shin, Kihwan Kim, Jun-Sik Cho, TaeWan Kim, Joo Hyung Park

    To improve the performance of perovskite solar cells (PSCs), we fabricate low-temperature SnO 2 -based CsPbI 3 PSCs and introduce an MgSnO x interlayer via atomic layer deposition between the spin-coated SnO 2 layer and FTO substrate in n–i–p structure.


  • A novel strategy for discovering inorganic solar-cell absorbers: leveraging octahedral features in ABX 3 structures

    by Wonzee Jung, Suim Lim, Yong Youn, Jiho Lee, Awet Mana Amare, Shah Syed Fawad Ali, Inyoung Jeong, Donghyeop Shin, Joo Hyung Park, Kihwan Kim, et al.

    High-throughput screening study presenting a novel strategy for discovering new solar cell absorbers, inspired by the octahedral framework of ABX 3 structures.


  • Compositionally Graded MoS2xTe2(1–x)/MoS2 van der Waals Heterostructures for Ultrathin Photovoltaic Applications

    by Dong Hyun Seo, Guen Hyung Oh, Jong Min Song, Ji Won Heo, Sungjune Park, Hagyoul Bae, Joo Hyung Park, TaeWan Kim

    Van der Waals heterojunctions utilizing two-dimensional (2D) transition-metal dichalcogenide (TMD) materials have emerged as focal points in the field of optoelectronic devices, encompassing applications in light-emitting devices, photodetectors, solar cells, and beyond. In this study, we transferred few-atomic-layer films of compositionally graded ternary MoS2xTe2(1-x) alloys onto metal-organic chemical vapor deposition-grown molybdenum disulfide (MoS2) as p- and n-type structures, leading to the creation of a van der Waals vertical heterostructure. The characteristics of the fabricated MoS2xTe2(1-x)/MoS2 vertical-stacked heterojunction were investigated considering the influence of tellurium (Te) incorporation. The systematic variation of parameter x (i.e., 0.8, 0.6, 0.5, 0.3, and 0) allowed for an exploration of the impact of Te incorporation on the photovoltaic performance of these heterojunctions. As a result, the power conversion efficiency was enhanced by approximately 6 orders of magnitude with increasing Te concentration; notably, photoresponsivities as high as ∼6.4 A/W were achieved. These findings emphasize the potential for enhancing ultrathin solar energy conversion in heterojunctions based on 2D TMDs.


  • Open Access

    Enhancement of Cd‐Free All‐Dry‐Processed Cu(In1‐x,Gax)Se2 Thin‐Film Solar Cells by Simultaneous Adoption of an Enlarged Bandgap Absorber and Tunable Bandgap Zn1‐xMgxO Buffer

    by Joo Hyung Park, Yonghee Jo, Ara Cho, Inyoung Jeong, Jin Gi An, Kihwan Kim, Seung Kyu Ahn, Donghyeop Shin, Jun‐Sik Cho

    Attempts to remove environmentally harmful materials in mass production industries are always a major issue and draw attention if the substitution guarantees a chance to lower fabrication cost and to improve device performance, as in a wide bandgap Zn1‐xMgxO (ZMO) to replace the CdS buffer in Cu(In1‐x,Gax)Se2 (CIGSe) thin‐film solar cell structure. ZMO is one of the candidates for the buffer material in CIGSe thin‐film solar cells with a wide and controllable bandgap depending on the Mg content, which can be helpful in attaining a suitable conduction band offset. Hence, compared to the fixed and limited bandgap of a CdS buffer, a ZMO buffer may provide advantages in Voc and Jsc based on its controllable and wide bandgap, even with a relatively wider bandgap CIGSe thin‐film solar cell. In addition, to solve problems with the defect sites at the ZMO/CIGSe junction interface, a few‐nanometer ZnS layer is employed for heterojunction interface passivation, forming a ZMO/ZnS buffer structure by atomic layer deposition (ALD). Finally, a Cd‐free all‐dry‐processed CIGSe solar cell with a wider bandgap (1.25 eV) and ALD‐grown buffer structure exhibited the best power conversion efficiency of 19.1%, which exhibited a higher performance than the CdS counterpart.


  • Scalable CIGS Solar Cells Employing a New Device Design of Nontoxic Buffer Layer and Microgrid Electrode

    by Inchan Hwang, Myounghyun Lee, Ahreum Lee, Inyoung Jeong, Soomin Song, Donghyeop Shin, Joohyung Park, Ara Cho, Young-Joo Eo, Jin-Su Yoo, et al.

    The efficiency of copper indium gallium selenide (CIGS) solar cells that use transparent conductive oxide (TCO) as the top electrode decreases significantly as the device area increases owing to the poor electrical properties of TCO. Therefore, high-efficiency, large-area CIGS solar cells require the development of a novel top electrode with high transmittance and conductivity. In this study, a microgrid/TCO hybrid electrode is designed to minimize the optical and resistive losses that may occur in the top electrode of a CIGS solar cell. In addition, the buffer layer of the CIGS solar cells is changed from the conventional CdS buffer to a dry-processed wide-band gap ZnMgO (ZMO) buffer, resulting in increased device efficiency by minimizing parasitic absorption in the short-wavelength region. By optimizing the combination of ZMO buffer and the microgrid/TCO hybrid electrode, a device efficiency of up to 20.5% (with antireflection layers) is achieved over a small device area of 5 mm × 5 mm (total area). Moreover, CIGS solar cells with an increased device area of up to 20 mm × 70 mm (total area) exhibit an efficiency of up to 19.7% (with antireflection layers) when a microgrid/TCO hybrid electrode is applied. Thus, this study demonstrates the potential for high-efficiency, large-area CIGS solar cells with novel microgrid electrodes.


  • Application of Bifacial Semitransparent CuInSe2 Absorber to the Bottom Cell in Bifacial Semitransparent Perovskite/CuInSe2 Tandem Solar Cell for Albedo Environment

    by Jin Gi An, Huyen Tran, Dongryeol Kim, Sang Min Lee, Ahreum Lee, Seung Kyu Ahn, Jun‐Sik Cho, Jihye Gwak, TaeWan Kim, Inyoung Jeong, et al.

    Although various types of bifacial solar cells exist, few studies have been conducted on bifacial semitransparent CuInSe2 solar cells (BS‐CISe SCs) despite the attractive potential in power generation from both sides in an albedo environment. The optimized BS‐CISe SCs with 300 and 800 nm‐thick absorber via a streamlined single‐stage co‐evaporation process exhibit a power conversion efficiency (PCE) of 6.32% and 10.6%, respectively. When double‐sided total 2.0 sun illumination is assumed in an albedo environment, the bifacial power generation densities (BPGD) of them increases to 9.41% and 13.9%. Four‐terminal bifacial semitransparent tandem solar cells (4T‐BST SCs) are fabricated to increase the BPGD by mechanically stacking a BS‐perovskite (PVK) top cell on top of a BS‐CISe bottom cell with the 300 and 800 nm‐thick absorber layers. When summed up, the best top and bottom cell PCEs of the 4T‐BST SC with 300 and 800 nm‐thick BS‐CISe SC are 18.8% and 21.1%, respectively. However, the practical BPGD values of the 4T‐BST SC under total 2 sun illumination are interestingly 23.4% and 24.4%, respectively. This is because the BS‐CISe bottom cell's thickness affects how much rear‐side illumination is transmitted to the BS‐PVK top cell, increasing its current density and BPGD.