GSGennady Shvachych

Gennady Shvachych

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gennady Shvachych has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Identification of Effective Coefficients of Thermal Contraction of Structural States in Cast Bronze by Solving Inverse Problems of Thermodeformation Modeling

    by Tetiana Kimstach, Hennadii Shvachych, Kostiantyn Uzlov, Oleksandr Bilyi, Serhii Repiakh, Serhii Semenov, Magdalena Krupska-Klimczak

    The temperature-dependent formation of free linear shrinkage in cast CuAl7Si2Sn1.5Mn0.3 aluminum bronze was investigated using a cascade inverse-identification approach. Experimental data for 17 bronze compositions (Kᵣ = 0.41–0.85), including differential thermal analysis, quantitative metallography, and free-linear-shrinkage measurements, were used to reconstruct three genetic structure-formation pathways. Unlike conventional phase-averaging approaches, the proposed methodology identifies effective integral-average coefficients of linear thermal contraction (IA-CLTCs) of successive structural states directly from integral shrinkage data without requiring independently prescribed thermophysical properties of individual phases. The identified IA-CLTC sequences were 20.10 → 15.44 → 18.99 × 10−6 K−1 for pathway I, 21.88 → 29.40 → 11.57 × 10−6 K−1 for pathway II, and 25.90 → 36.65 → approximately 11.67 × 10−6 K−1 for pathway III. The first coefficient of pathway I was adopted as a fixed reference value. The model reproduced the experimental shrinkage with R2 = 0.998 and RMSE = 0.00562 percentage points. Conditional cascade leave-one-composition-out cross-validation yielded RMSE = 0.00995 percentage points, compared with 0.00915 percentage points for a simple linear-regression benchmark. Near the boundary between pathways II and III, the reconstructed thermal and structural-transformation contributions exhibited nearly compensating changes, although their quantitative separation remained model-dependent. Numerical sensitivity analysis revealed strong parameter correlation and limited practical identifiability for pathway III. The proposed approach therefore provides a framework for reconstructing effective temperature–deformation characteristics of successive structural states, while independent experimental validation remains necessary for their broader predictive and physical interpretation.

  • Phase composition of multicomponent aluminum bronzes criteria-based evaluation (Part 1. Supersaturated copper α-matrix and phase composition of Cu–Al–X system multicomponent bronzes stability criteria)

    by Т. V Kimstach, K. І Uzlov, G. G Shvachych, О. P Bilyi, S. I Repyakh

    Purpose. To establish structurally reliable and thermodynamically justified criteria for assessing alloys supersaturated copper α-matrix stability and predicting the phase composition of multicomponent bronzes formed under crystallization and subsequent cooling non-equilibrium conditions. Methodology. Methodology is based on thermodynamic analysis, structural-parametric approach and experimental data generalization combination. Copper matrix condition was estimated by parameter  (theoretically required and actual Cu content ratio). Thermodynamic analysis was performed within Gibbs energy minimization framework, taking into account small deviations and components with  activities connection. Structural and mechanical properties were evaluated using KR criterion. Findings. To assess in multicomponent bronzes single-phase state fixing or losing conditions, concentration parameter  has been proposed, which characterizes the conditions for solid solution non-equilibrium stability loss under casting conditions. It has been shown that at   1 conditions for secondary phase’s formation arise. KR criterion has been proposed to assess structural and mechanical properties. It has been proven that  and KR joint using provides “composition-stability-structure-properties” relationship for multicomponent aluminum bronzes comprehensive description. Originality. For the first time, quantitatively consistent system has been established of correlations between supersaturation parameter , compositional criterion KR and structural parameter  ‒ Cu–Al–Si–Mn–Sn system bronzes secondary phases volume fraction, which are formed under non-equilibrium conditions of solidification and in solid state subsequent cooling and are inherent in castings manufactured using foundry sand and metal molds. Practical value. Using indicator () and criterion (KR), proposed in the work, will allow increasing Cu–Al–Si–Mn–Sn system bronzes phase composition and properties predicting accuracy when changing their alloying elements concentrations. to reduce the time spent and resources during new alloys development or known bronze grades composition optimization by building regression and predictive models for managing their phase composition and properties. A parameter and criterion have been developed, along with an approach to creating new alloys and improving the existing alloys, their analysis, etc.

  • Open Access

    Концептуальна модель системи доставки медикаментів за допомогою безпілотних літальних апаратів

    by D. Moroz, G. Shvachych, B. Moroz, M. Ievlanov, L. Kabak

    В статті розглянута проблема створення автоматизованої системи забезпечення лікарськими засобами і медичними технологіями споживачів з використанням безпілотних літальних апаратів (БПЛА). Розглянуто і охарактеризовано задачі, які необхідно вирішити в рамках цієї проблеми. Сформульовано задачу оптимальної (раціональної) організації обробки інформаційних потоків, що функціонують в системі доставки лікарських засобів і медичних технологій за допомогою БПЛА. Запропоновано для організації обробки окремих повідомлень використовувати спеціальну керовану дисципліну, яка забезпечує обробку окремих повідомлень без втрат, в межах термінових обмежень і в умовах мінімальної фактичної продуктивності обчислювальної системи. Наведено математичну постановку задачі організації обробки повідомлень з використанням спеціальної керованої дисципліни. Математична модель дозволяє визначити основні характеристики обробки інформаційних потоків в межах необхідних вимог. Оговорено необхідні подальші напрямки роботи по створенню автоматизованої системи доставки лікарських засобів і медичних технологій до споживача за допомогою БПЛА

  • Development of a Linear-Scaling Consensus Mechanism of the Distributed Data Ledger Technology

    by Gennady Shvachych, Boris Moroz, Andrii Matviichuk, Hanna Sashchuk, Oleksandr Dzhus, Volodymyr Busygin

  • Main mechanisms of blockchain technology implementation in digital technologies application

    by G. G Shvachych, B. І Moroz, І. А Pobochii, О. P Timchenko, V. D Kozenkova, V. V Busygin

    Purpose. To analyze the basic principles of blockchain technology implementation, highlighting the algorithms for reaching consensus in the blockchain network to ensure its reliability; to identify key problems in the implementation of such technology and suggest ways to overcome them; to perform a systematic analysis of the blockchain technology contradictions and suggest ways to eliminate them. Methodology. The research used the basics of economic analysis of economic entities to compare their managements centralized and decentralized models. This approach showed that another wave of transformation of business and social models has unfolded in recent years, caused by the next-generation digital technologies involving the economys transition to the digital area. Revealing the blockchain technology mechanisms is based on modern databases and peer-to-peer computer networks, covering in detail the main means of contradictions, application, and implementation of blockchain technology. Findings. The main results of these studies are obtained in the digital economy. The paper shows that digital technologies open up a wide range of opportunities for different sectors of the economy. The research highlights the features and principles of distributed registry technology (Blockchain) applications. It is shown that as a decentralized data registry, blockchain technology is the most discussed and relevant topic in the digital economy. Originality. The paper further developed the main component of the digital economy, which is progressing most intensively, the distributed ledger technology (Blockchain). The paper analyzed its strengths, such as cost reduction, increased security, and transparency of transactions that attracted the attention of various sectors of the economy. The authors approach for eliminating the revealed mechanisms of contradictions, application, and implementation of blockchain technology is presented. The definition of the digital economy, digital technologies in the economy, and end-to-end digital technologies have been improved to clarify the understanding of the economic management decentralization problems. That showed that the digital economy has several subtleties associated with insufficient research and comprehension of technical implementation and flexibility. Practical value. The research results will be useful for expanding ideas about the blockchain technology implementation in different sectors of the economy, accompanied by lower costs, increased security and transparency of economic entities, and improving their economic efficiency and development in digital technologies application. The blockchain technologies implantation at the enterprises of the mining and metallurgical industry allows making the production and sales of products more efficient and transparent, and at the same time significantly reduces the human factor.


  • Open Access

    THE ENVIRONMENT DYNAMICS IDENTIFICATION BASED ON THE MODULAR COMPUTING COMPLEX

    by Borys Moroz, Gennady Shvachych, Valentyna Chorna, Nataliiya Voroshylova

    The research aims at covering the mathematical modeling issues of multidimensional applied problems of ecology based on the application of a modular computing complex. The problem of modeling air pollution processes is solved by mathematical models that adequately describe fundamental processes. That reveals issues such as a detailed analysis of the atmosphere of the city or industrial area, short-term forecast of air quality in the region, assessment of long term air purification programs, optimal emission management, transboundary transfer, etc. At the same time, the formulation and methods of solving problems of environmental dynamics identification are considered, which essence is to estimate the input parameters based on the factual information about the modeled system known from the experiment. In these studies, the multidimensional equation of harmful impurities transfer was reduced to a sequence of schemes involving unknown values in a single direction, alternately in the longitudinal, transverse and vertical.The implicit schemes lead to systems of algebraic linear equations with a three-diagonal structure. Thus, the methodological basis of the difference splitting schemes provides the economic and sustainable implementation of numerical models by the scalar runs method. That approach focuses on the fact that the greatest effect of a parallel processor is achieved when it is used to perform matrix computations of linear algebra.In order to analyze the feasibility of mathematical models, a package of applications was developed to compute the transfer of harmful impurities. A solution to several applied problems for the identification of the environmental dynamics is given.

  • Open Access

    METHOD OF LINES IN DISTRIBUTED PROBLEMS OF EXPERIMENTAL DATA PROCESSING

    by Gennady Shvachych, Nataliіa Vozna, Ivashchenko Olena, Oleksandr Bilyi, Dmytro Moroz

    In many cases, the mathematical support of non-stationary thermal experiments is based on methods for solving the inverse heat conduction problem (IHCP), which include boundary thermal conditions determination, identification of heat and mass transfer processes, restoration of external and internal temperature fields, etc. However, at present, the main field of the IHCP application remains the processing and interpretation of the results of the thermal experiments. It was here where the most considerable theoretical and applied successes were achieved in methods' effectiveness and the breadth of their practical use. This paper highlights the issues of mathematical modeling of multidimensional non-stationary problems of metallurgical thermophysics.The primary research purpose aims at solving problems associated with identifying parallel structures of algorithms and programs and their reflection in the computers’ architecture in solving a wide range of applied problems. Supercomputers are currently inaccessible due to the enormous cost and service price. In this regard, a real alternative is cluster-type computing systems by which the simulation results are covered in this paper.Being a relatively new technology, cluster-type parallel computing systems are useful in solving a large class of non-stationary multidimensional problems, while allowing to increase the productivity and quality of computations. The software developed in this paper can be used to plan and process the results of a thermophysical experiment. The algorithms developed in the application program package are simply reconstructed to solve other coefficient and boundary problems of thermal conductivity. The developed algorithms for solving thermophysical problems are highly accurate and efficient: the test solution for IHCP with accurate input data coincides with the thermophysical features of the sample material. The developed software for processing the results of a thermophysical experiment is self-regulating. Moreover, it is quite merely tuned to the solution of others and, in particular, of boundary IHCP.

  • Open Access

    INTELLIGENT DECISION SUPPORT SYSTEM

    by Gennady Shvachych, Ivan Pobochij, Maryna Sazonova, Oleksandr Bilyi, Dmytro Moroz

    Here one of the new efficient approaches to solving problems of intelligent support of making decisions of a cooperate enterprise scale is analyzed, bearing in mind that the enterprise is oriented towards integration of two interconnected information technologies: a technology of constructing information storages and a technology of intelligent data analysis. A new conception of the role of informating-controlling systems in controlling and operating pipe manufacturing process is suggested. It broadens a traditional view over information systems just as if it were only an instrument of a computer data analysis. The role of the modern information systems in the manufacturing as an independent scientific and applied direction serving as a connecting link in the triad “raw product – ngineering process – end product” is substantiated. Some problems connected with plantation of the informating-controlling systems in the pipe manufacturing is formulated. It broadens a traditional view over information systems just as if it were only an instrument of a computer data analysis. The practical application of this product permits the operating personnel of the enterprise to control the engineering process, analyze the processes passing in each mill, adjust the PRP mills’ engineering characteristics in the pipe-manufacturing process. The suggested approach influences quite strongly the production’s quality improving and enables to work stably in the thin-walled pipe grades sphere.

  • Designing Features of Parallel Computational Algorithms for Solving of Applied Problems on Parallel Computing Systems of Cluster Type

    by Gennady Shvachych, Volodymyr Busygin, Khohlova Tetyana, Boris Moroz, Fedorov Evhen, Kholod Olena


  • Automated Control Parameters Systems of Technological Process Based on Multiprocessor Computing Systems

    by Gennady Shvachych, Boris Moroz, Ivan Pobocii, Dmytro Kozenkov, Volodymyr Busygin