JérÉmY Bonhomme has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Structures phononiques à ondes de Love pour la biodétection

    by JérÉmY Bonhomme

    Le développement de systèmes de diodétection est extrêmement important pour un grand nombre de domaines et la nécessité d’amélioré la sensibilité et la précision des mesures devient un enjeu important pour certaines applications de pointe. Les ondes acoustiques de surface (SAW) sont largement utilisées pour des applications capteurs notamment pour la biodétection, cependant les limites théoriques de leur sensibilité seront bientôt atteintes. Parallèlement, de nouvelles méthodes de manipulation des ondes acoustiques grâce à des arrangements périodiques, appelés cristaux phononiques, ont été développées. L'objectif est de montrer une preuve de concept de l’interaction de structures phononiques couplées à un dispositif SAW à ondes de Love ainsi que leur sensibilité à un dépôt de masse afin de montrer leur potentiel pour des applications de biodétection. Le travail a consisté en une étape de modélisation numérique afin de concevoir et optimiser une structure phononique de référence, puis en une phase expérimentale avec le développement de processus de fabrication en salle blanche et de tests afin de caractériser les dispositifs et d’estimer une première sensibilité pour ce type de systèmes.

  • Open Access

    Microfabricated multi-axis cell for integrated atomic devices

    by L Péroux, A Dewilde, A Mursa, A Mazzamurro, J Bonhomme, Q Tanguy, E Klinger, L Gauthier-Manuel, O Gaiffe, A Talbi, et al.

    Microfabricated alkali vapor cells enable the miniaturization of atomic sensors, but require collective wafer-level integration of complex features. In many applications-including magnetometers, gyroscopes, magneto-optical traps, and fluorescence imaging-multiple optical accesses are needed to enhance performance. Yet, achieving this without compromising manufacturability remains challenging. In this work, we present a wafer-level fabrication approach that enables three orthogonal optical pathways in microfabricated alkali vapor cells, using fully scalable and collective processes. Our method relies on the thermal reflow of glass preforms, shaped by laser-assisted etching (LAE) and bonded between silicon frames. The relatively low surface roughness produced by LAE allows for effective reflow, which further smooths the surfaces without significantly compromising the optical planarity of the windows. This process results in multi-axis vapor cells featuring embedded, optics-grade lateral windows. We evaluate the device performance through both single-beam and dual-beam atomic magnetometry measurements. Magnetic sensitivities better than 200 fT Hz − 1 are demonstrated along each of the three orthogonal axes, confirming the potential of the approach for tri-axis magnetic field sensing at sub-picotesla resolution. This fabrication strategy opens new perspectives for versatile, high-performance atomic sensors, fully compatible with wafer-level integration and mass production.


  • GYTRIX Quartz MEMS Gyro: From Concept to Northfinding Measurements

    by O. Le Traon, J. Bonhomme, L. Hudeley, M. Duquesnoy, C. Duclos, A. Andrieux-Ledier, P. Lavenus, J. Guerard, R. Levy

    This letter presents the concept of a quartz crystal Coriolis vibrating gyroscope named GYTRIX (GYro for TRIgonal piezoelectric Xtal) able to operate in matched modes using force to rebalance or in the whole angle mode. The symmetry of the design that respects quartz crystal trigonal symmetry enables two degenerated modes with nominally identical thermomechanical behavior. This new gyro concept is presented, along with the first step in its development roadmap: the design of a separated-mode open-loop gyro transducer, in order to validate the concept with existing open-loop electronics. Prototype realization and experimental measurements made it possible to validate theoretical angular random walk of 0.017°/√h and to demonstrate gyrocompass operation.

  • Locally sealed microfabricated vapor cells filled from an ex situ Cs source

    by L. Péroux, A. Dewilde, R. Chutani, A. Mazzamurro, J. Bonhomme, A. Mursa, J.-F. Clément, A. Talbi, P. Pernod, N. Passilly, et al.

    Microfabricated alkali vapor cells are key to enable miniature devices such as atomic clocks and optically pumped magnetometers with reduced size, weight, and power. Yet, more versatile fabrication methods are still needed to further expand their use cases. Here, we demonstrate an approach to collectively fill and seal microfabricated cesium cells using locally sealed microchannels patterned within one of the glass substrates comprising the cells. Unlike current methods that rely on wafer-level anodic bonding as the last sealing step, an approach based on local sealing opens the path to features so far limited to traditional glass-blown cells, including the ability to deposit temperature-sensitive antirelaxation coatings, reaching lower background gas pressure without an additional gettering material or filling with diverse atomic or molecular species.


  • Open Access

    Phononic Crystal Made of Silicon Ridges on a Membrane for Liquid Sensing

    by Abdellatif Gueddida, Victor Zhang, Laurent Carpentier, Jérémy Bonhomme, Bernard Bonello, Yan Pennec, Bahram Djafari-Rouhani

    We propose the design of a phononic crystal to sense the acoustic properties of a liquid that is constituted by an array of silicon ridges on a membrane. In contrast to other concepts, the ridges are immersed in the liquid. The introduction of a suitable cavity in the periodic array gives rise to a confined defect mode with high localization in the cavity region and strong solid–liquid interaction, which make it sensitive to the acoustic properties of the liquid. By using a finite element method simulation, we theoretically study the transmission and cavity excitation of an incident flexural wave of the membrane. The observation of the vibrations of this mode can be achieved either outside the area of the phononic crystal or just above the cavity. We discuss the existence of the resonant modes, as well as its quality factor and sensitivity to liquid properties as a function of the geometrical parameters. The performance of the proposed sensor has then been tested to detect the variation in NaI concentration in a NaI–water mixture.


  • Micropillared Surface to Enhance the Sensitivity of a Love-Wave Sensor

    by Jérémy Bonhomme, Mourad Oudich, Mohamed Lamine Fayçal Bellaredj, Jean-François Bryche, Pedro Alberto Segura Chavez, Denis Beyssen, Paul G. Charette, Frédéric Sarry

    Surface-acoustic-wave (SAW) sensors have undergone outstanding developments during the last decades. However, for biosensing applications, they struggle to compete with optical sensing technologies. In this work, we present a Love-wave-based sensing platform that leverages the use of the local resonances of micropillars fabricated on the surface of the guiding layer. We demonstrate numerically and experimentally that the Love-wave interaction with the micropillars produces sharp attenuation dips in the transmission spectrum. These dips are associated with the excitations of flexural and torsional resonance modes of the pillars. We utilize these modes to achieve higher detection sensitivity of temperature variation and mass loading using sugar and microbeads concentrations in aqueous solutions. Integrating a lattice of micropillars into SAW-based devices offers a strong potential for detecting low particles concentrations.


  • Substrate influence on the vibrational response of gold nanoresonators: Towards tunable acoustic nanosources

    by R. Delalande, J. Bonhomme, E. Dandeu, L. Becerra, L. Belliard

    The development of applications based on metallic nano-objects requires an extensive knowledge of their vibrational properties. Its size, shape, materials, or even crystallinity have a strong influence on the vibrational frequencies of a nano-object. It is also known that the coupling with environment has a strong effect on the lifetime of its resonating modes. However, the impact of the contact between a nano-object and its substrate still requires further investigation. Here we report on the vibrational response of gold disks for different contact area with a silicon substrate. The investigation of the quality factor of the first thickness mode of the disks highlights an important energy transfer from the disks to the substrate. The impact of the size of the contact area on the frequencies of the radial eigenmodes is also reported both experimentally and numerically. Finally, it is shown that such objects can be excited by acoustic waves propagating from the substrate. These findings display the possibility to use nanodisks to develop acoustic microscopy at the nanoscale.


  • Numerical characterization of Love waves dispersion in viscoelastic guiding-layer under viscous fluid

    by Jérémy Bonhomme, Mourad Oudich, Pedro Alberto Segura Chavez, Mohamed Lamine Fayçal Bellaredj, Jean-François Bryche, Denis Beyssen, Paul G. Charette, Frédéric Sarry

    We present a finite element (FE) based model to accurately investigate the dispersion and attenuation of Love waves in a multilayered structure made of a piezoelectric substrate, a guiding layer, and a viscous fluid. The numerical model solves the general form of the wave equations that includes the materials anisotropy, piezoelectricity, and viscoelasticity. We express the wave equations for elastic waves in a particular formulation in order to solve an eigenvalue problem where the eigenvalue is the complex wavenumber k from which we can derive the phase velocity [ω/Re(k)] and the attenuation rate [Im(k)]. The numerical model enables us to study the effects of the interdigitated electrodes, the materials viscoelasticity and piezoelectricity, and the fluid's viscosity on the wave phase velocity and attenuation. Our FE based model will facilitate optimizing the design of anisotropic piezoelectric platforms for Love waves propagation under viscous fluid loading.


  • Theoretical study of a phononic structure for bio-sensing applications

    by J. Bonhomme, M. Oudich, P. A. Segura Chavez, L. Olive, D. Beyssen, P. G. Charette, F. Sarry

    In this work, we investigate the evolution of the properties of a pillar phononic crystal in order to simplify the fabrication process by reducing the thickness of the layer. The structure is constructed by stacking alternate layers of SiO2 and Tungsten. The reduction of the dimensions moves the band gap to the upper frequencies and it is possible to adjust its aperture with the ratio comparing the radius of the cylinder with the layers’ thickness. On a substrate, the pillars give resonant modes that can be excited by shear surface waves and gives a sharp peak in the transmission spectrum of the surface wave with a very high quality factor. We also study the theoretical mass sensitivity of the device and we propose a numerical method to determine the theoretical maximum sensitivity that could be obtain by the pillars system. This pillar based metasurface presents a very promising mass sensitivity and a possible way to increase the performance of SAW bio-sensors.


  • Love wave biosensor to diagnose modification of cell viscoelasticy

    by F. Sarry, P.A. Segura Chavez, J. Bonhomme, L. Olive, D. Beyssen, M. Oudich, P.G. Charette

    In this work we present the development of an integrated microfluidic platform addressing several challenges. The sensor array combines a dual Rayleigh wave and Love wave for the diagnosis of the modification of cell viscoelasticity. Based on simulations taking into equations of motion and Navier-Stokes equation for the viscous liquid region, we evaluate and correlate the Love surface acoustic wave sensing part in order to enhance the sensitivity. The results corroborate the idea that the whole measurement system must be considered to develop an integrated optimized analysis system.