Sam Peppou-Chapman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sam Peppou-Chapman has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Chiara Neto
The University of Sydney
5 shared publications - Anna Waterhouse
The University of Sydney Nano Institute
1 shared publication Cameron S. Ware
School of Chemistry and University of Sydney Nano Institute, The University of Sydney , NSW 2006, Australia
1 shared publicationDaniel Balzer
School of Chemistry and University of Sydney Nano Institute, The University of Sydney , NSW 2006, Australia
1 shared publication- Erin M. Humphries
ProCan, Children’s Medical Research Institute, Faculty of Medicine and Health, The University of Sydney, Westmead, Australia
1 shared publication Felix Vüllers
Institute of Microstructure Technology (IMT), Karlsruhe Institute of Technology (KIT) 1 , Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
1 shared publication
Latest Publications
- 8 March 2021
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 37 (10) , 3025-3037
Depletion of the Lubricant from Lubricant-Infused Surfaces due to an Air/Water Interface
Lubricant-infused surfaces (LIS) have emerged as an innovative way to combat several modern challenges such as biofouling, ice formation, and surface drag. The favorable properties of LIS are dependent on the presence and distribution of a lubricant layer coating the underlying substrate. Unfortunately, this layer is not indefinitely stable and depletes due to external forces. Here, we study how an air/water interface depletes the lubricant from LIS as a function of lubricant wettability on the substrate by varying the chemistry of both the lubricant and the substrate. The lubricants were chosen to represent some of those most commonly used in the literature (silicone oil, perfluoropolyethers, and mineral oil). We use an optical Wilhelmy plate tensiometer to measure the contact angle of the air/water interface on the LIS in situ as the sample is driven through the air/water interface and contact angle hysteresis as a qualitative measure of lubricant depletion. This data is augmented with ex situ quantitative mapping of lubricant thickness using atomic force microscopy (AFM) meniscus force measurements. We find that a thick layer of excess lubricant is always removed in just one dip, regardless of wettability, and that lubricants that do not spread fully on the substrate deplete faster due to their dewetting into droplets. We also find that lubricants that spread onto the air/water interface are more susceptible to depletion. Finally, we investigate the effect of repeated immersions on the properties of liquidlike poly(dimethylsiloxane) (PDMS) chains tethered to glass and find that dynamic contact angles on these surfaces remain constant over several dips and therefore their low hysteresis is unlikely due to unbound polymer.
- 8 March 2021
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 37 (10) , 3025-3037
Depletion of the Lubricant from Lubricant-Infused Surfaces due to an Air/Water Interface
Lubricant-infused surfaces (LIS) have emerged as an innovative way to combat several modern challenges such as biofouling, ice formation, and surface drag. The favorable properties of LIS are dependent on the presence and distribution of a lubricant layer coating the underlying substrate. Unfortunately, this layer is not indefinitely stable and depletes due to external forces. Here, we study how an air/water interface depletes the lubricant from LIS as a function of lubricant wettability on the substrate by varying the chemistry of both the lubricant and the substrate. The lubricants were chosen to represent some of those most commonly used in the literature (silicone oil, perfluoropolyethers, and mineral oil). We use an optical Wilhelmy plate tensiometer to measure the contact angle of the air/water interface on the LIS in situ as the sample is driven through the air/water interface and contact angle hysteresis as a qualitative measure of lubricant depletion. This data is augmented with ex situ quantitative mapping of lubricant thickness using atomic force microscopy (AFM) meniscus force measurements. We find that a thick layer of excess lubricant is always removed in just one dip, regardless of wettability, and that lubricants that do not spread fully on the substrate deplete faster due to their dewetting into droplets. We also find that lubricants that spread onto the air/water interface are more susceptible to depletion. Finally, we investigate the effect of repeated immersions on the properties of liquidlike poly(dimethylsiloxane) (PDMS) chains tethered to glass and find that dynamic contact angles on these surfaces remain constant over several dips and therefore their low hysteresis is unlikely due to unbound polymer.
- Top Cited Papers
- 12 May 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 49 (11) , 3688-3715
Life and death of liquid-infused surfaces: a review on the choice, analysis and fate of the infused liquid layer
We review the rational choice, the analysis, the depletion and the properties imparted by the liquid layer in liquid-infused surfaces – a new class of low-adhesion surface.
- 12 May 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 49 (11) , 3688-3715
Top Cited PapersLife and death of liquid-infused surfaces: a review on the choice, analysis and fate of the infused liquid layer
We review the rational choice, the analysis, the depletion and the properties imparted by the liquid layer in liquid-infused surfaces – a new class of low-adhesion surface.
- 1 January 2019
- Published by AIP Publishing in Physics of Fluids
- Vol. 31 (1) , 012102
Effect of repeated immersions and contamination on plastron stability in superhydrophobic surfaces
Development of superhydrophobic surfaces is of great interest for drag-reducing applications as air layers retained underwater greatly reduce fluidic drag. However, liquid flow over these surfaces can result in the collapse of the lubricating air layer. Here, we investigate the dynamic stability of retained air layers on three different superhydrophobic surfaces against repeated immersion and motion through various viscous liquids. The three surfaces investigated are a highly ordered polytetrafluoroethylene micropillar array, a two-level hierarchical random polycarbonate nanofur, and a double-scale hierarchical Teflon AF wrinkled surface. Both repeated immersions and contamination by viscous liquids accelerated the rate of plastron decay on the pillar array and the nanofur, while the Teflon wrinkles remained dry. Five topographical features were identified as correlated to a dynamically stable retained air layer, and a relation between these stability-enhancing parameters and the drag-reducing capabilities is found. Furthermore, resistance of superhydrophobic surfaces against contamination is studied and the directionality of the Cassie-to-Wenzel wetting transition on air-retaining surfaces is demonstrated. Together, an understanding of these properties allows for the rational design of new superhydrophobic surfaces fit for application.
- 1 January 2019
- Published by AIP Publishing in Physics of Fluids
- Vol. 31 (1) , 012102
Effect of repeated immersions and contamination on plastron stability in superhydrophobic surfaces
Development of superhydrophobic surfaces is of great interest for drag-reducing applications as air layers retained underwater greatly reduce fluidic drag. However, liquid flow over these surfaces can result in the collapse of the lubricating air layer. Here, we investigate the dynamic stability of retained air layers on three different superhydrophobic surfaces against repeated immersion and motion through various viscous liquids. The three surfaces investigated are a highly ordered polytetrafluoroethylene micropillar array, a two-level hierarchical random polycarbonate nanofur, and a double-scale hierarchical Teflon AF wrinkled surface. Both repeated immersions and contamination by viscous liquids accelerated the rate of plastron decay on the pillar array and the nanofur, while the Teflon wrinkles remained dry. Five topographical features were identified as correlated to a dynamically stable retained air layer, and a relation between these stability-enhancing parameters and the drag-reducing capabilities is found. Furthermore, resistance of superhydrophobic surfaces against contamination is studied and the directionality of the Cassie-to-Wenzel wetting transition on air-retaining surfaces is demonstrated. Together, an understanding of these properties allows for the rational design of new superhydrophobic surfaces fit for application.
- 31 August 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (39) , 33669-33677
Mapping Depletion of Lubricant Films on Antibiofouling Wrinkled Slippery Surfaces
Slippery liquid infused porous surfaces (SLIPS) have recently gained a lot of attention because of their wide range of applications. We recently showed that SLIPS with most of their surface depleted of lubricant, as little lubricant as 0.02 ± 0.01 μL cm–1, were effective against marine biofouling. Characterization of the depletion and configuration of the immobilized liquid layer on SLIPS is crucial to optimizing their performance. Previous attempts at mapping lubricant thickness have been diffraction limited or indirectly measured thickness. Here, we use atomic force microscopy meniscus force measurements to directly map lubricant thickness with nanoscale resolution on wrinkled surfaces made from Teflon and poly(4-vinylpyridine) (P4VP). Using this method, we show that SLIPS are easily depleted and are effectively heterogeneous surfaces, where the majority of the surface is a thick lubricating layer stabilized by capillary forces and part nanothin layer stabilized long-range intermolecular forces. We found that the depleted silicone oil thickness on the tops of nonwettable (Teflon) wrinkles is approx. 5 nm, close to but greater than the minimum measurable thickness of approx. 3 nm. The silicone oil thickness on the tops of wettable (P4VP) wrinkles is approx. 15 nm. Surfaces in this state still show antibiofouling properties and thus show that a thick lubricating layer is not necessary for all favorable properties of SLIPS.
- 31 August 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (39) , 33669-33677
Mapping Depletion of Lubricant Films on Antibiofouling Wrinkled Slippery Surfaces
Slippery liquid infused porous surfaces (SLIPS) have recently gained a lot of attention because of their wide range of applications. We recently showed that SLIPS with most of their surface depleted of lubricant, as little lubricant as 0.02 ± 0.01 μL cm–1, were effective against marine biofouling. Characterization of the depletion and configuration of the immobilized liquid layer on SLIPS is crucial to optimizing their performance. Previous attempts at mapping lubricant thickness have been diffraction limited or indirectly measured thickness. Here, we use atomic force microscopy meniscus force measurements to directly map lubricant thickness with nanoscale resolution on wrinkled surfaces made from Teflon and poly(4-vinylpyridine) (P4VP). Using this method, we show that SLIPS are easily depleted and are effectively heterogeneous surfaces, where the majority of the surface is a thick lubricating layer stabilized by capillary forces and part nanothin layer stabilized long-range intermolecular forces. We found that the depleted silicone oil thickness on the tops of nonwettable (Teflon) wrinkles is approx. 5 nm, close to but greater than the minimum measurable thickness of approx. 3 nm. The silicone oil thickness on the tops of wettable (P4VP) wrinkles is approx. 15 nm. Surfaces in this state still show antibiofouling properties and thus show that a thick lubricating layer is not necessary for all favorable properties of SLIPS.
- Top Cited Papers
- 16 January 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (4) , 4173-4182
Marine Antifouling Behavior of Lubricant-Infused Nanowrinkled Polymeric Surfaces
A new family of polymeric, lubricant-infused, nanostructured wrinkled surfaces was designed that effectively retains inert non-toxic silicone oil, upon draining by spin-coating and vigorous shear for two weeks. The wrinkled surfaces were fabricated using three different polymers (Teflon AF, polystyrene, and poly(4-vinylpyridine)) and two shrinkable substrates (polyshrink and shrinkwrap), and Teflon on polyshrink was found to be the most effective system. The volume of trapped lubricant was quantified by adding Nile red to the silicone oil before infusion, then extracting the oil and Nile red from the surfaces in heptane and measuring by fluorimetry. Higher volumes of lubricant induced lower roll-off angles for water droplets, and in turn induced better antifouling performance. The infused surfaces displayed stability in seawater and inhibited growth of Pseudoalteromonas spp. bacteria up to 99%, with as little as 0.9 μL cm-2 of silicone oil infused. Field tests in the waters of Sydney Harbour over seven weeks showed that silicone oil infusion inhibited the attachment of algae, but as the silicone oil was slowly depleted over time algal attachment increased. The infused wrinkled surfaces have high transparency and are moldable, making them suited to protecting the windows of underwater sensors and cameras.
- 16 January 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (4) , 4173-4182
Top Cited PapersMarine Antifouling Behavior of Lubricant-Infused Nanowrinkled Polymeric Surfaces
A new family of polymeric, lubricant-infused, nanostructured wrinkled surfaces was designed that effectively retains inert non-toxic silicone oil, upon draining by spin-coating and vigorous shear for two weeks. The wrinkled surfaces were fabricated using three different polymers (Teflon AF, polystyrene, and poly(4-vinylpyridine)) and two shrinkable substrates (polyshrink and shrinkwrap), and Teflon on polyshrink was found to be the most effective system. The volume of trapped lubricant was quantified by adding Nile red to the silicone oil before infusion, then extracting the oil and Nile red from the surfaces in heptane and measuring by fluorimetry. Higher volumes of lubricant induced lower roll-off angles for water droplets, and in turn induced better antifouling performance. The infused surfaces displayed stability in seawater and inhibited growth of Pseudoalteromonas spp. bacteria up to 99%, with as little as 0.9 μL cm-2 of silicone oil infused. Field tests in the waters of Sydney Harbour over seven weeks showed that silicone oil infusion inhibited the attachment of algae, but as the silicone oil was slowly depleted over time algal attachment increased. The infused wrinkled surfaces have high transparency and are moldable, making them suited to protecting the windows of underwater sensors and cameras.