DLDavid Lepage

David Lepage

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


David Lepage has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Critical Review for an Accurate Electrochemical Stability Window Measurement of Solid Polymer and Composite Electrolytes

    by Adrien Méry, Steeve Rousselot, David Lepage, Mickaël Dollé

    All-solid-state lithium batteries (ASSLB) are very promising for the future development of next generation lithium battery systems due to their increased energy density and improved safety. ASSLB employing Solid Polymer Electrolytes (SPE) and Solid Composite Electrolytes (SCE) in particular have attracted significant attention. Among the several expected requirements for a battery system (high ionic conductivity, safety, mechanical stability), increasing the energy density and the cycle life relies on the electrochemical stability window of the SPE or SCE. Most published works target the importance of ionic conductivity (undoubtedly a crucial parameter) and often identify the Electrochemical Stability Window (ESW) of the electrolyte as a secondary parameter. In this review, we first present a summary of recent publications on SPE and SCE with a particular focus on the analysis of their electrochemical stability. The goal of the second part is to propose a review of optimized and improved electrochemical methods, leading to a better understanding and a better evaluation of the ESW of the SPE and the SCE which is, once again, a critical parameter for high stability and high performance ASSLB applications.


  • Open Access

    Thermal and Electrochemical Properties of Solid Polymer Electrolytes Prepared via Lithium Salt-Catalyzed Epoxide Ring Opening Polymerization

    by Gabrielle Foran, Nina Verdier, David Lepage, Arnaud Prébé, David Aymé-Perrot, Mickaël Dollé

    Solid polymer electrolytes have been widely proposed for use in all solid-state lithium batteries. Advantages of polymer electrolytes over liquid and ceramic electrolytes include their flexibility, tunability and easy processability. An additional benefit of using some types of polymers for electrolytes is that they can be processed without the use of solvents. An example of polymers that are compatible with solvent-free processing is epoxide-containing precursors that can form films via the lithium salt-catalyzed epoxide ring opening polymerization reaction. Many polymers with epoxide functional groups are liquid under ambient conditions and can be used to directly dissolve lithium salts, allowing the reaction to be performed in a single reaction vessel under mild conditions. The existence of a variety of epoxide-containing polymers opens the possibility for significant customization of the resultant films. This review discusses several varieties of epoxide-based polymer electrolytes (polyethylene, silicone-based, amine and plasticizer-containing) and to compare them based on their thermal and electrochemical properties.


  • Open Access

    Challenges in Solvent-Free Methods for Manufacturing Electrodes and Electrolytes for Lithium-Based Batteries

    by Nina Verdier, Gabrielle Foran, David Lepage, Arnaud Prébé, David Aymé-Perrot, Mickaël Dollé

    With the ever-growing energy storage notably due to the electric vehicle market expansion and stationary applications, one of the challenges of lithium batteries lies in the cost and environmental impacts of their manufacture. The main process employed is the solvent-casting method, based on a slurry casted onto a current collector. The disadvantages of this technique include the use of toxic and costly solvents as well as significant quantity of energy required for solvent evaporation and recycling. A solvent-free manufacturing method would represent significant progress in the development of cost-effective and environmentally friendly lithium-ion and lithium metal batteries. This review provides an overview of solvent-free processes used to make solid polymer electrolytes and composite electrodes. Two methods can be described: heat-based (hot-pressing, melt processing, dissolution into melted polymer, the incorporation of melted polymer into particles) and spray-based (electrospray deposition or high-pressure deposition). Heat-based processes are used for solid electrolyte and electrode manufacturing, while spray-based processes are only used for electrode processing. Amongst these techniques, hot-pressing and melt processing were revealed to be the most used alternatives for both polymer-based electrolytes and electrodes. These two techniques are versatile and can be used in the processing of fillers with a wide range of morphologies and loadings.


  • Quantification and Effect of Residual Water in Solid Polymer Electrolytes

    by Denis Mankovsky, David Lepage, David Ayme-Perrot, Mickael Dolle

    In the context of the urgent modern energy challenges, lithium-metal (LMB) and lithium-ion batteries (LIB) are conceivable candidates for long term electrochemical storage of renewable energies. As such, while many possible electrolytes are being investigated, solid polymer electrolytes (SPE) are potential replacements for the classic liquid electrolytes that are used in today’s commercial LIB developed and patented by Sony Energitech in 1991. Despite offering non-flammable properties, eliminating the need for heavy casings and allowing the use of higher-energy density lithium at the anode, these electrolytes still suffer from low ionic conductivities. Therefore, plenty of novel SPE systems are being developed and proposed for their captivating properties. Oftentimes, these systems seem appealing but are hardly reproducible in laboratory settings, basing oneself solely upon the published experimental conditions. An interesting inter-laboratory study was published, in which the same thiophosphate ceramic-based solid electrolyte samples were distributed across 11 different research groups. The relative standard deviation calculated from reported conductivities reached a value of 50%. (1) Recently, it has been shown that different post-drying procedures influenced the water content of electrodes which in turn affected the electrochemical properties of LIBs. (2) In SPEs, amongst different factors that could affect ionic conductivities, we believe that water plays a non-neglectable role. Knowing that relative humidity is strongly affected by the local climate, conditions can vary from laboratory to laboratory from a day to another. Being a factor that isn’t controlled effortlessly, samples’ water content can easily be overlooked. However, only a few recent papers mention that matter.(3) The issue is that on one hand, even though some authors reported enhanced ionic conductivities with an increased water content of SPEs, others claim the opposite to be true, which makes the subject ambiguous.(4) On the other hand, very few SPE systems have been studied, which makes the effect of water unclear. In this study, three different types of polymers, poly(ethylene oxide) (PEO), poly(acrylonitrile) (PAN), and acrylonitrile methyl acrylate copolymer latex (AMAC), two different lithium salts (LiTFSI and LiClO4), and two different processing methods (Wet solution casting and solvent-free dry mixing) have been used to prepare different SPE samples. Samples of PEO-LiTFSI, PAN-LiClO4, and AMAC-LiTFSI with different water contents have been prepared and analysed following a strict reproducible drying/doping protocol. Different electrochemical parameters such as the ionic conductivity, the activation barrier and the electrochemical stability window have been assessed in different samples and correlated to their respective water contents. It has been shown that water does indeed influence SPEs and that it’s a factor that needs to be taken into consideration for reproducibility purposes. 1: S.Ohno, T. Bernges, J. Buchheim, M. Duchardt, A. K. Hatz, M. A. Kraft, H. Kwak, A. L. Santhosha, Z. Liu, N. Minafra, F. Tsuji, A. Sakuda, R. Schlem, S. Xiong, Z. Zhang, P. Adelhelm, H. Chen, A. Hayashi, Y. S. Jung, B. V. Lotsch, B. Roling, N. M. Vargas-Barbosa, W. G. Zeier, ACS Energy Lett., 5, 910-915 (2020). 2: F. Huttner, W. Haselrieder, A. Kwade, Energy Technol., 8, 1900245 (2020). 3: B. Commarieu, A. Paolella, S. Collin-Martin, C. Gagnon, A. Vijh, A. Guerfi, K. Zaghib, J. Power Sources, 436, 226852 (2019). 4: M. Z. Munshi, B. B. Owens, Appl. Phys. Commun., 8 (1987). TOTAL Classification: Restricted Distribution TOTAL - All rights reserved

  • Blend of Polymers As New Solid Electrolytes for Lithium-Ion Batteries

    by Lea Caradant, David Lepage, Paul Nicolle, Arnaud Prébé, David Ayme-Perrot, Mickael Dolle

    With the increase of energy demand, the depletion of oil reserves and the development of intermittent renewable energy sources, the storage and the production of energy are one of the main concerns of the XXI century. Lithium Ion Battery (LIB) are among the best choices because of their high energy and power densities, longer lifespan and lighter than other energy storage systems. [1] LIB are composed of two intercalation electrodes, electronically isolated by an ions conductive electrolyte. The early LIB were composed of an organic liquid electrolyte. However, they had many disadvantages, the most worrying of which is their safety concern related to short-circuits and potential leakages of the flammable liquid solvent [2]. In this context, the development of new solid materials for electrolyte (such as ceramics and polymers) are a central issue. Solid Polymer Electrolyte (SPE) are among the most promising solution to deal with safety problems. They are ionically conducting solid material in which lithium salts are dissolved thanks to polar groups [3]. In LIBs, polymer electrolyte has a dual role. It plays both the role of separator between electrodes and binder in the composite electrodes. Chemical and electrochemical stabilities, absence of solvents intercalation and good interfacial contact between active material and electronic components are among the advantages of SPE. The conduction mechanisms in polymer are quite different from the processes in low molecular weight solvents and are still not fully understood. Cation transport in polymer involves two steps which are considered to be dissociated or not, depending on the model chosen (Arrhenius or Vogel-Fulcher-Tammann, respectively) [4]. Above the glass transition temperature, segmental motions of polymer chains allow ions hopping between coordinating sites on the same polymer chain or between two neighbouring chains. According to previous studies, ionic conduction takes place mainly in the amorphous phase with high segmental motions. That’s why, polymer electrolytes often suffer from poor ionic conductivity at room temperature (less than 10-5 S/cm) compared to their liquid counterparts. Lots of research tried to improve this factor by decreasing the crystalline part and the glass transition, melting and crystallisation temperatures, but to the detriment of mechanical, thermal or electrochemical stabilities. Our team made an effort to preserve a good ionic conductivity, and at the same time, improve other stability properties, by using a blend of polymers. The existence of functional polar groups makes them ideal candidates to dissolve lithium salts (such as Lithium bis(trifluoromethanesulfonyl)imide LiTFSI) and Lithium bis(fluorosulfonyl)imide (LiFSI)) and form stable ion-polymer complexes. In this work, thermal, mechanical and electrochemical properties of our solid polymer electrolyte based on different ratios of each polymer and salt were characterized thanks to Differential Scanning Calorimetry (DSC), Atomic Force Microscopy (AFM) and other electrochemical techniques (such as Electrochemical Impedance Spectroscopy and Cyclic Voltammetry). Conduction mechanisms and salt/polymers interactions are characterised thanks to Scanning electron microscopy, Energy Dispersive X-ray Spectroscopy (SEM/EDX) and Fourier-transform Infrared Spectroscopy (FTIR). Half-cells with high voltage cathodes (LiNiMnCoO2 (NMC), LiFePO4 (LFP)) and low voltage anodes (Graphite, Li4Ti5O12 (LTO)) showed high charge/discharge capacity at 0.1C (at 60°C and 50°C). These first results indicate that this blend of polymers is a promising candidate as SPE for Lithium-Ion Batteries. References : J. B. Goodenough and K. S. Park, American Chemical Society, 2013, 135, 1167-1176. D. Baril, C. Michot and M. Armand, Solid State Ionics, 1997, 94, 35-47. F. M. Gray, Solid polymer electrolytes, VCH New Tork, 1991. R. C. Agrawal and G. P. Pandey, Journal of Physics D: Applied Physics, 2008, 41, 223001.


  • Designs of Experiments to Optimize Li-Ion Batteries

    by Olivier Rynne, Matthieu Dubarry, David Lepage, Corentin Molson, Eva Nicolas, David Ayme-Perrot, Dominic Rochefort, Mickael Dollé

    Studies pinpointed the limitation of power-related performance for Li-ion batteries to the microstructure of each electrode.1, 2 This random arrangement of the active material (AM) and carbon filling particles bound by a polymer is typically characterized through physical values such as tortuosity, porosity and Mac Mullin Number.3 There is nonetheless no consensus on what the best formulation is for a given set of electrode components. The relationship between microstructure and performance is investigated by planning and analyzing a Design of Experiments based on a Complex Mixture Design. Thirty different formulations were characterized where Li4Ti5O12 was the AM, and carbon black and carbon nanofibers were conductive fillers. As for the binder, two were studied: polyvinylidene fluoride and a fluorine-free thermoplastic elastomer.4 All other factors, e.g. rheology or experimenter bias, were closely monitored and finely controlled to remain identical for all samples. Electrochemical performance were studied at low, medium and high charging speeds to account for different limitations of full capacity retention. Statistical analysis showed clear correlations between the formulation and the electrodes’ capacity with very high descriptive statistics, e.g. R2. Lastly, strong correlations were found between capacity and microstructure, strengthening further the trust in the empirical equations. These robust models helped choosing optimal fluorine-free formulations that surpassed even the highest performing previous electrodes. 1. Vasileiadis, A.; Klerk, N. J. J. d.; Smith, R. B.; Ganapathy, S.; Harks, P. P. R. M. L.; Bazant, M. Z.; Wagemaker, M., Toward Optimal Performance and In‐Depth Understanding of Spinel Li4Ti5O12 Electrodes through Phase Field Modeling. Advanced Functional Materials 2018, 0 (0), 1705992. 2. Ngandjong, A. C.; Rucci, A.; Maiza, M.; Shukla, G.; Vazquez-Arenas, J.; Franco, A. A., Multiscale Simulation Platform Linking Lithium Ion Battery Electrode Fabrication Process with Performance at the Cell Level. The Journal of Physical Chemistry Letters 2017, 8 (23), 5966-5972. 3. Landesfeind, J.; Hattendorff, J.; Ehrl, A.; Wall, W. A.; Gasteiger, H. A., Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy. Journal of The Electrochemical Society 2016, 163 (7), A1373-A1387. 4. Rynne, O.; Lepage, D.; Aymé-Perrot, D.; Rochefort, D.; Dollé, M., Application of a Commercially-Available Fluorine-Free Thermoplastic Elastomer as a Binder for High-Power Li-Ion Battery Electrodes. Journal of The Electrochemical Society 2019, 166 (6), A1140-A1146. With this presentation, we want to show the versatility and power of Designs of Experiments to the community, whether for electrode formulation or new material synthesis, as the input parameters can be easily interchangeable. Figure 1


  • Gel Polymer Electrolyte Made of an Amorphous Polyacrylonitrile-Based Elastomer

    by Nina Verdier, David Lepage, Ramzi Zidani, Arnaud Prébé, David Ayme-Perrot, Christian Pellerin, Mickael Dollé, Dominic Rochefort

    Lithium-ion batteries (LiBs) are a mature technology which has attracted much attention over the last three decades with the development of portable devices. With the increasing number of LiBs and their use in electric vehicles, there are persistent efforts to enhance their safety by identifying suitable substitutes for liquid non-aqueous electrolytes, which are highly flammable, volatile, and can cause leakage. To this end, gel polymer electrolytes (GPEs) represent a promising alternative. To be suitable in applications and maximize ionic conductivity, polymers must meet specific requirements, the most important ones being a low glass transition temperature (Tg) and a low crystallinity, as ions move faster in amorphous phase. Moreover, these polymers need to be electrochemically stable and provide mechanical resistance as well as flexibility to the GPE. To increase the conductivity, polymers with polar functional groups that can dissolve salts are required. Several polymers, like PEO or PAN have already been studied but one limitation is their high Tg (above ambient temperature) as well as a high crystallinity which make them brittle and limit the ionic conductivity. To circumvent this limitation, we studied an amorphous polymer based on acrylonitrile monomers. This elastomer, HNBR (Hydrogenated Nitrile Butadiene Rubber), was previously studied by our group and was shown to be thermally cross-linkable, leading to a polymer chemically resistant to electrolytes and electrochemically stable over a wide potential range. Hence, we propose to investigate thermally cross-linked HNBRs to gain a better understanding on the effect of interactions between polar nitrile functions and lithium ions and finally use this system as a GPE for Li-ion battery. To do so, a three-component system comprising HNBR:solvent:LiTFSI was studied to pinpoint the correct ratio to provide the GPE with competitive conductivity. Infrared spectroscopy was used to shed light on the interactions between nitriles and lithium ions while PFG-NMR was utilized to obtain spin-lattice relaxation times (T1) and diffusion coefficients of 7Li and 19F for various HNBR-based GPEs. These results were correlated to EIS measurements and among the GPEs tested, those composed of 2M LiTFSI in propylene carbonate and HNBR with an acrylonitrile content of 50% are the most promising. This study highlights the benefits of high acrylonitrile content in the polymer and the use of a solvent with moderate donor number to promote interactions between nitriles and Li+.

  • A Study on Processing Parameters Affecting Solid Polymer Electrolytes Performances

    by Denis Mankovsky, David Lepage, David Ayme-Perrot, Mickael Dollé

    In the modern world, the rapid advancement of new technologies is accompanied by an increasing energetic demand. Following today`s trend, energy consumption will undoubtedly increase in the following years. Over the last 50 years, lithium-metal batteries have been considered as potential candidates for long-term high-performance electrochemical storage. (1) Although their operation is effective, they still present limitations mainly due to lithium dendrite growth associated with electrodeposited Li+ from the electrolyte on the anode material. This phenomenon causes internal short-circuits resulting in premature battery failure. (2) Various solid-state battery systems are being developed in hope to resolve the said issue. Amongst others, solid polymer electrolytes (SPE) have been investigated since Armand`s work in the 80`. (3) Even though these systems have non-flammable properties and successfully suppress dendrite growth, most SPEs do not reach ionic conductivities values higher than 10-3 S/cm at room temperature and offer lower energy densities and cycle number compared to the standard liquid electrolyte counterpart. (4) As a result of that, an increasing number of published literature shows off new engaging SPE systems. However, oftentimes, the presented performances are hardly reproducible due to the lack of precise and detailed experimental conditions. It is believed that some overlooked factors during processing may affect the aforementioned performances. (5-7) Certain parameters that affect ionic conductivities of SPEs have been investigated by techniques including but not limited to electrochemical impedance spectroscopy (EIS) and solid-state 7Li-NMR. It will be demonstrated that these parameters must be precisely controlled to ensure the reproducibility and the validity of measurements. Finally, it will be shown that this study can be applied to several types of polymers. 1: Hall P. J., Bain E. J., Energy Policy, 36, 4352 (2008). 2: Lisbona D., Snee T., Process. Saf. Environ., 89, 434 (2011). 3: Armand M. B., Ann. Rev. Mater. Sci. 16, 245 (1986). 4: Penghui Y., Haobin Y., Zhiyu D., Yanchen L., Juan L., Marino L., Junwei W., Xingjun L., Front. Chem., 7, 522 (2019). 5: Fullerton-Shirey S. K., Maranas J.K, Macromolecules, 42, 2142 (2009). 6: Devaux D., Bouchet R., Glé D., Denoyel R., Solid State Ion., 227, 119 (2012). 7: Wang X., Zhang L., Li G., Zhang G., Shao Z.G., Yi B., Electrochim. Acta, 158, 253 (2015)

  • Open Access

    Designs of Experiments for Beginners—A Quick Start Guide for Application to Electrode Formulation

    by Olivier Rynne, Matthieu Dubarry, Corentin Molson, David Lepage, Arnaud Prébé, David Aymé-Perrot, Dominic Rochefort, Mickael Dollé

    In this paper, we will describe in detail the setting up of a Design of Experiments (DoE) applied to the formulation of electrodes for Li-ion batteries. We will show that, with software guidance, Designs of Experiments are simple yet extremely useful statistical tools to set up and embrace. An Optimal Combined Design was used to identify influential factors and pinpoint the optimal formulation, according to the projected use. Our methodology follows an eight-step workflow adapted from the literature. Once the study objectives are clearly identified, it is necessary to consider the time, cost, and complexity of an experiment before choosing the responses that best describe the system, as well as the factors to vary. By strategically selecting the mixtures to be characterized, it is possible to minimize the number of experiments, and obtain a statistically relevant empirical equation which links responses and design factors.


  • Conducting Polymers for Batteries

    by Danny Chhin, Laura Padilla-Sampson, David Lepage, Laurence Savignac, Ali Nazemi, Steen Brian Schougaard

    Charge storage in organics has been a dream for many years. In part because organics offer advantages in terms of processing, sourcing of starting materials, and a high degree of tailorability. The first part of the talk, will cover recent advances in using conductive polymers to enhance performance of classical battery chemistries. This is followed by our recent work using catechols as the charge storing unit, specifically using blended and co-polymer techniques. A major part of the talk will be devoted to the challenges and methods of characterizing the charged and discharged state of these new charge storage systems.