OROlivier Rynne

Olivier Rynne

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Olivier Rynne has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Designs of Experiments to Optimize Li-Ion Batteries

    by Olivier Rynne, Matthieu Dubarry, David Lepage, Corentin Molson, Eva Nicolas, David Ayme-Perrot, Dominic Rochefort, Mickael Dollé

    Studies pinpointed the limitation of power-related performance for Li-ion batteries to the microstructure of each electrode.1, 2 This random arrangement of the active material (AM) and carbon filling particles bound by a polymer is typically characterized through physical values such as tortuosity, porosity and Mac Mullin Number.3 There is nonetheless no consensus on what the best formulation is for a given set of electrode components. The relationship between microstructure and performance is investigated by planning and analyzing a Design of Experiments based on a Complex Mixture Design. Thirty different formulations were characterized where Li4Ti5O12 was the AM, and carbon black and carbon nanofibers were conductive fillers. As for the binder, two were studied: polyvinylidene fluoride and a fluorine-free thermoplastic elastomer.4 All other factors, e.g. rheology or experimenter bias, were closely monitored and finely controlled to remain identical for all samples. Electrochemical performance were studied at low, medium and high charging speeds to account for different limitations of full capacity retention. Statistical analysis showed clear correlations between the formulation and the electrodes’ capacity with very high descriptive statistics, e.g. R2. Lastly, strong correlations were found between capacity and microstructure, strengthening further the trust in the empirical equations. These robust models helped choosing optimal fluorine-free formulations that surpassed even the highest performing previous electrodes. 1. Vasileiadis, A.; Klerk, N. J. J. d.; Smith, R. B.; Ganapathy, S.; Harks, P. P. R. M. L.; Bazant, M. Z.; Wagemaker, M., Toward Optimal Performance and In‐Depth Understanding of Spinel Li4Ti5O12 Electrodes through Phase Field Modeling. Advanced Functional Materials 2018, 0 (0), 1705992. 2. Ngandjong, A. C.; Rucci, A.; Maiza, M.; Shukla, G.; Vazquez-Arenas, J.; Franco, A. A., Multiscale Simulation Platform Linking Lithium Ion Battery Electrode Fabrication Process with Performance at the Cell Level. The Journal of Physical Chemistry Letters 2017, 8 (23), 5966-5972. 3. Landesfeind, J.; Hattendorff, J.; Ehrl, A.; Wall, W. A.; Gasteiger, H. A., Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy. Journal of The Electrochemical Society 2016, 163 (7), A1373-A1387. 4. Rynne, O.; Lepage, D.; Aymé-Perrot, D.; Rochefort, D.; Dollé, M., Application of a Commercially-Available Fluorine-Free Thermoplastic Elastomer as a Binder for High-Power Li-Ion Battery Electrodes. Journal of The Electrochemical Society 2019, 166 (6), A1140-A1146. With this presentation, we want to show the versatility and power of Designs of Experiments to the community, whether for electrode formulation or new material synthesis, as the input parameters can be easily interchangeable. Figure 1


  • Open Access

    Designs of Experiments for Beginners—A Quick Start Guide for Application to Electrode Formulation

    by Olivier Rynne, Matthieu Dubarry, Corentin Molson, David Lepage, Arnaud Prébé, David Aymé-Perrot, Dominic Rochefort, Mickael Dollé

    In this paper, we will describe in detail the setting up of a Design of Experiments (DoE) applied to the formulation of electrodes for Li-ion batteries. We will show that, with software guidance, Designs of Experiments are simple yet extremely useful statistical tools to set up and embrace. An Optimal Combined Design was used to identify influential factors and pinpoint the optimal formulation, according to the projected use. Our methodology follows an eight-step workflow adapted from the literature. Once the study objectives are clearly identified, it is necessary to consider the time, cost, and complexity of an experiment before choosing the responses that best describe the system, as well as the factors to vary. By strategically selecting the mixtures to be characterized, it is possible to minimize the number of experiments, and obtain a statistically relevant empirical equation which links responses and design factors.


  • Melt-Processing of Electrodes for Lithium-Ion Batteries: A New Solvent-Free Approach

    by Soumia EL Khakani, Nina Verdier, Olivier Rynne, Dorian Ciszewski, David Lepage, Arnaud Prébé, David Ayme-Perrot, Antonella Badia, Mickael Dollé, Dominic Rochefort

    Lithium-ion is currently the leading technology for electrochemical energy storage, especially in the transportation sector. The electrification of vehicles through the use of lithium-ion batteries (LiBs) is at the center of the world efforts to decrease atmospheric pollution by reducing CO2 emission. Due to the high efficiency of electrical motors, a net reduction in greenhouse gases is achieved upon electrification of vehicles even in areas where electricity is generated from fossil fuels. Yet, the rapidly growing production of LiB brings new concerns on the environmental cost of the technology. The analysis of a complete their life cycle, from mining precursors to recycling batteries at the end of their life, reveals that several steps of the cycle can be improved to further reduce the environmental footprint of lithium-ion batteries. It is in this context that our group got interested in developing alternative approached to electrode fabrication, a key aspect of LiB manufacturing. Currently, most of the electrode fabrication processes involves the use of organic solvents, typically N-methyl-2-pyrrolidone (or NMP), which is toxic and costly. As such, a considerable effort is spent during electrode fabrication to recuperate NMP vapors and prevent exposure to the workers and environment. Avoiding the use of any solvents during electrode fabrication would not only minimize the environmental impact but would also result into lower energy consumption. This contribution presents a study of a new solvent-free melt process technique to LiB electrode fabrication through the use of elastomeric binders. The impact of formulation on active material dispersion, microscopic morphology, electronic percolation and porosity will be discussed. With such parameters optimized, the electrochemical response of composite electrodes based on LiFePO4 and Li4Ti5O12 active materials were characterized both individually and as full cells. The battery performance will be compared with PVDF-based electrodes made with a conventional approach.

  • Influence of the Formulation on the Microstructure and Thus Performance of Li-Ion Batteries

    by Olivier Rynne, Matthieu Dubarry, Corentin Molson, David Lepage, David Ayme-Perrot, Arnaud Prébé, Dominic Rochefort, Mickael Dollé

    The research in the field of Li-ion batteries is stronger than ever, with a common aim of increasing the energy and power density. More and more studies pinpoint the limitation of power-related performance for Li-ion batteries to the microstructure of each electrode. This random arrangement of the active material and carbon filling particles bound by the binder is typically characterized through physical values such as tortuosity, porosity and MacMullin Number. To investigate the relationship between microstructure and performance in details, we used a design of experiment to evaluate close to seventy different formulations with LiFePO4 and Li4Ti5O12 as the active materials (AM), carbon black (CB) and carbon nanofibers (CNF) as the conductive fillers, and two different binders: polyvinylidene fluoride and a thermoplastic elastomer. By keeping the loading and porosity constant throughout the study, all formulations are homogenously dispersed in a regular tetrahedron of coordinates (AM, CB, CNF, Binder). First, the microstructure was characterized in order to extract data related to the tortuosity, porosity and electrical conductivity. Then, galvanostatic measurements, in charge and discharge, from C/25 to 30C allowed to gather information such as the low- and high-rate capacity, energy and power and the Peukert constant for intermediate rates. The statistical analysis of all these results showed some clear correlation between the formulation and the microstructure and performance of the cells. Thus, it was made possible to draw the optimal formulation to get the best compromise depending on the application requirements (energy, rate or power). Finally, trends between the physical properties and performance were deciphered. This could be used to fine-tune the best possible electrode. Figure 1

  • A Solvent-Free Approach to Lithium-Ion Battery Electrodes Using Melt-Processable Elastomeric Binders

    by Soumia El Khakani, Nina Verdier, Olivier Rynne, Dorian Ciszewski, David Lepage, Arnaud Prébé, David Ayme-Perrot, Antonella Badia, Mickael Dollé, Dominic Rochefort

    Lithium-ion is currently the leading technology for electrochemical energy storage, especially in the transportation sector. The electrification of vehicles through the use of lithium-ion batteries (LiBs) is at the center of the world efforts to decrease atmospheric pollution by reducing CO2 emission. Due to the high efficiency of electrical motors, a net reduction in greenhouse gases is achieved upon electrification of vehicles even in areas where electricity is generated from fossil fuels. Yet, the rapidly growing production of LiB brings new concerns on the environmental cost of the technology. The analysis of a complete their life cycle, from mining precursors to recycling batteries at the end of their life, reveals that several steps of the cycle can be improved to further reduce the environmental footprint of lithium-ion batteries. It is in this context that our group got interested in developing alternative approached to electrode fabrication, a key aspect of LiB manufacturing. Currently, most of the electrode fabrication processes involves the use of organic solvents, typically N-methyl-2-pyrrolidone (or NMP), which is toxic and costly. As such, a considerable effort is spent during electrode fabrication to recuperate NMP vapors and prevent exposure to the workers and environment. Avoiding the use of any solvents during electrode fabrication would not only minimize the environmental impact but would also result into lower energy consumption. This contribution presents a study of a new solvent-free melt process technique to LiB electrode fabrication through the use of elastomeric binders. The impact of formulation on active material dispersion, microscopic morphology, electronic percolation and porosity will be discussed. With such parameters optimized, the electrochemical response of composite electrodes based on LiFePO4 and Li4Ti5O12 active materials were characterized both individually and as full cells. The battery performance will be compared with PVDF-based electrodes made with a conventional approach.

  • Application of a Commercially-Available Fluorine-Free Thermoplastic Elastomer as a Binder for High-Power Li-Ion Battery Electrodes

    by Olivier Rynne, David Lepage, David Aymé-Perrot, Dominic Rochefort, Mickael Dollé

    Lotader 5500, a commercially-available polyethylene-co-ethyl acrylate-co-maleic anhydride thermoplastic elastomer, is investigated as a new binder for Li-ion battery composite electrodes with LiFePO4 and Li4Ti5O12. This binder was chosen to enhance the cohesion and adhesion properties of the composite electrode it binds through its reactive functional groups; moreover, the absence of fluorine in its composition renders it more suitable than polyvinylidene fluoride (PVDF) in the battery recycling process, which often relies on pyrolysis. Lotader 5500’s insolubility in a carbonate electrolyte is demonstrated, as well as its similar electrochemical behavior to PVDF in the 50 mV to 4.2 V range vs. Li+/Li. After demonstrating the high-rate performance of the half-cells, full cells were assembled, and cycled 1,000 times (charged at a constant voltage of 2.4 V and discharged at 10D), and all exhibit a final capacity of approximately 70 mAh.g−1.


  • (Invited) Dry Process for the Preparation of Porous Composite Electrodes for Battery Application

    by Soumia El-Khakani, Nina Verdier, David Lepage, Olivier Rynne, Ahmad Zohrevand, Dorian Ciszewski, Antonella Badia, Dominic Rochefort, Mickael Dollé

    The development of advanced Li-ion battery would require innovative approaches to improve the present performances, while lowering the environmental footprint and price of their fabrication. In this scope, we are currently carrying out different projects to consider the electrode materials as well the process to make the batteries. This presentation will focus on the second aspects, which concerns the development of a solvent-free process to make composite electrodes using an owned patented process by Hutchinson [1]. Currently, most of the electrode fabrication involves the use of organic solvent (typically N-methyl-2-pyrrolidone, NMP, which is toxic). Life cycle analysis studies of the LiB manufacturing process showed that this type of electrode preparation accounts for a significant portion of their overall environmental imprint [2]. While the use of water, instead of NMP, would be preferable to minimize this impact [3], a solvent-free electrode manufacturing consumes less energy in comparison to solvent-based methods [4]. Different electrode formulations were prepared by the dry process. The mechanical, electrical and electrochemical properties in half cells were assessed and compared to composite electrodes obtained by doctor blade coating using the classical PVdF binder. The different steps of the dry process (mixing, lamination and adhesion to current collectors) were studied and optimized separately to reach the maximum loading, while ensuring good power performances. The Ragone plots for each electrode, tested in half cells, were evaluated and the best formulation was retained for the full cell manufacture. The performances of LiFePO4/Li4Ti5O12 batteries are comparable to our best electrodes made with PVdF. The different aspects of the process will be discussed in this presentation. References [1] Ph. Sonntag, D. Aymé-Perrot, B. Dufour, Arnaud Prébé, N. Garois, Patent WO2015124835A1 [2] G. Majeau-Bettez, T.R. Hawkins, A.H. Stromman, Environmental Science & Technology, 2011, 45, 4548. [3] M. Zackrisson, L. Avellan, J. Orlenius, Journal of Cleaner Production, 2010, 18, 1519. [4] Environmental Protection Agency “Lithium-ion batteries and nanotechnology for electric vehicles: A life cycle assessment,” EPA 744-R-12-001, 2012.