KNKham Man Niang

Kham Man Niang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kham Man Niang has a total of 91 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of aluminium incorporation on the semiconducting properties of p-type tin monoxide

    by Benjamin J Peek, Matthew Werner, Kham Niang, Xiao Chen, Andrew J Flewitt, Oliver W S Clark, Joe C Goodall, Andrew L Johnson, Satyajit Das, Feras Alkhalil, et al.

    Herein, we report the first thin film transistor TFTs using Sn (HMDS) 2 as a precursor for the atomic layer deposition (ALD) of SnO. We subsequently investigate the incorporation of Al-ions in the device channel, from three aluminium sources using low energy ion scattering (LEIS). Alumina is widely exploited in the fabrication of p-type tin monoxide (SnO) TFTs. It has been used as a surface passivation, as a dopant, and as a substrate barrier layer. Alumina is a source of Al 3+ , which is a compensating donor in SnO. We demonstrate that the intentional incorporation of aluminium into SnO, by introducing alumina cycles during ALD has the effect of increasing the sheet resistance of the SnO films by 10 5 times and amorphising the film microstructure. Furthermore, the incorporation of Al ions from alumina passivation-capping and barrier layers is revealed at their interfaces with the SnO TFT channel. The transfer characteristics of TFTs fabricated from Al-doped and capped SnO films are used to show the effects of annealing, which are explained in terms of Al ion incorporation. Interdiffusion or incorporation of Al ions into the SnO semiconductor, identified by depth profile LEIS, indicates that auto-doping plays a significant role in modifying the characteristics of SnO TFTs. The application of alumina layers in the design of p-type tin monoxide TFTs must take into account the influence of Al ion incorporation on the semiconducting properties of SnO.


  • Open Access

    Atomic Layer Deposition of Disordered p‐Type SnO Using a Heteroleptic Tin(II) Precursor: Influence of Disorder on P‐Channel SnO Thin‐Film Transistor Characteristics

    by Benjamin J. Peek, Kham Man Niang, Benjamin McMitchell, Heath Bagshaw, Karl Dawson, Adrian Gardner, Babak Bakhit, James D. Parish, Oliver W. S. Clark, Joe C. Goodall, et al.

    The readily scalable deposition of amorphous oxide semiconductor films is desirable for polymer‐based flexible and large‐area thin‐film transistor technology. Here, the atomic layer deposition (ALD) of p‐type SnO is demonstrated using a new heteroleptic tin(II) precursor. The films exhibit a disordered microstructure, due to the intercalation of fragments of the precursor ligands. Annealing induces crystallization of SnO, as volatile impurities are expelled from the film. Initial examination of bottom gate SnO thin‐film transistors with SiO 2 dielectric exhibit a maximum field‐effect mobility of 1.9 cm 2 V −1 s −1 and a minimum threshold voltage of 2 V, just before the onset of crystallization. Once capped with an alumina passivation layer, the devices have stable transfer characteristics, post annealing, over a period of two years, and a stable field effect mobility under negative bias stress of 1 MV cm −1 for 2 h at ambient. The disordered SnO semiconductor characteristics make it a candidate for polymer‐based CMOS electronics, where a low thermal budget meets the requirements of polymeric substrates.


  • Open Access

    Atomic layer deposited Ta2O5: From process optimization to thin film characterization

    by Xiao Chen, Kham M. Niang, Babak Bakhit, Yuri Jeon, Judith Driscoll, Andrew Flewitt

    Tantalum pentoxide (Ta2O5) thin films were grown by atomic layer deposition (ALD) using pentakis(dimethylamino)tantalum (PDMAT) and H2O at temperatures between 150 and 300 °C. A peak growth rate of 0.68 Å/cycle was achieved at 200 °C. The as-deposited films from the optimal process are oxygen rich with an oxygen-to-tantalum (O/Ta) ratio of 3.3. Various thin film characterization methods were undertaken, and they showed that the as-deposited Ta2O5 films are amorphous and have a large optical bandgap of 4.1 eV. They possess a high breakdown strength of 3.9 MV cm−1, a high electrical resistivity of 1 × 1013 Ω cm, and a respectable dielectric constant of 14, indicating its suitability as high k dielectric materials in optical and electronic devices. Moreover, a phase transition to polycrystalline β-Ta2O5 occurs after annealing at 700 °C, and it is stable up to 1000 °C.


  • Open Access

    Defect Density of States of Tin Oxide and Copper Oxide p‐type Thin‐film Transistors

    by Måns J. Mattsson, Kham M. Niang, Jared Parker, David J. Meeth, John F. Wager, Andrew J. Flewitt, Matt W. Graham

    The complete subgap defect density of states (DoS) is measured using the ultrabroadband (0.15 to 3.5 eV) photoconduction response from p‐type thin‐film transistors (TFTs) of tin oxide, SnO, and copper oxide, Cu2O. The resulting TFT photoconduction spectra clearly resolve bandgaps that show the presence of interfacial and oxidized minority phases. In tin oxide, the SnO majority phase has a small 0.68 eV bandgap enabling ambipolar or p‐mode TFT operation. By contrast, in copper oxide TFTs, an oxidized minority phase with a 1.4 eV bandgap corresponding to CuO greatly reduces the channel hole mobility at the charge accumulation region. Three distinct subgap DoS peaks are resolved for the copper oxide TFT and are best ascribed to copper vacancies, oxygen‐on‐copper antisites, and oxygen interstitials. For tin oxide TFTs, five subgap DoS peaks are observed and are similarly linked to tin vacancies, oxygen vacancies, and oxygen interstitials. To achieve desirable unipolar p‐mode TFTs, the conduction band‐edge defect density of oxygen interstitials must be sufficiently large to suppress n‐mode conduction. In both channel materials, the metal vacancy peak densities near the valence band edge determine the hole concentrations, which then predict the TFT Fermi level energy, observed on‐off ratios, and threshold voltages.


  • Open Access

    Roadmap for Schottky barrier transistors

    by Eva Bestelink, Giulio Galderisi, Patryk Golec, Yi Han, Benjamin Iniguez, Alexander Kloes, Joachim Knoch, Hiroyuki Matsui, Thomas Mikolajick, Kham M Niang, et al.

    In this roadmap we consider the status and challenges of technologies that use the properties of a rectifying metal-semiconductor interface, known as a Schottky barrier (SB), as an asset for device functionality. We discuss source gated transistors, which allow for excellent electronic characteristics for low power, low frequency environmentally friendly circuits. We also consider reconfigurable field effect transistors. In such devices, two or more independent gate electrodes can be used to program different functionalities at the device level, enabling ultra-secure embedded devices. Both types of transistors can be used for neuromorphic systems, notably by combining them with ferroelectric SB transistors which enable a large number of analog states. At cryogenic temperatures SB transistors can advantageously serve for the control electronics in quantum computing devices. If the source/drain of the metallic contact becomes superconducting, Josephson junctions with a tunable phase can be realized for scalable quantum computing applications. Developing applications using SB devices requires physics-based and compact models that can be used for circuit simulations, which are also discussed. The roadmap reveals that the main challenges for these technologies are improving processing, access to industrial technologies and modeling tools for circuit simulations.


    • 12 November 2024
    • Published by HAL in HAL
    Open Access

    Roadmap for Schottky barrier Transistors

    by Eva Bestelink, Giulio Galderisi, Patryk Golec, Yi Han, Benjamin Iniguez, Alexander Kloes, Joachim Knoch, Hiroyuki Matsui, Thomas Mikolajick, Kham Niang, et al.

    In this roadmap we consider the status and challenges of technologies that use the properties of a rectifying metal-semiconductor interface, known as a Schottky barrier, as an asset for device functionality. We discuss source gated transistors, which allow for excellent electronic characteristics for low power, low frequency environmentally friendly circuits. Also considered are reconfigurable field effect transistors, where the presence of two or more independent gate electrodes can be used to program different functionalities at the device level, providing an important option for ultra-secure embedded devices. Both types of transistors can be used for neuromorphic systems, notably by combining them with ferroelectric Schottky barrier transistors with an increased number analog states. At cryogenic temperatures SB transistors can advantageously serve for the control electronics in quantum computing devices. If the source/drain of the metallic contact becomes superconducting, Josephson junctions with a tunable phase can be realized for scalable quantum computing applications. Developing applications using Schottky barrier devices require physics-based and compact models that can be used for circuit simulations. The roadmap reveals that the main challenges for these technologies are improving processing, access to industrial technologies and modeling tools for circuit simulations.

  • Promoting Low-Voltage Saturation in High-Performance a-InGaZnO Source-Gated Transistors

    by Eva Bestelink, Kham M. Niang, Gwenhivir Wyatt-Moon, Andrew J. Flewitt, Radu A. Sporea

    As oxide semiconductors increase in popularity with emerging flexible electronics, advances in material performance may lead to parasitic and nonideal effects becoming more prominent. Specifically, in source-gated transistors (SGTs), and other contact-controlled devices, the influence of the lateral drain field produced by drain bias leads to an overwhelming increase in charge density at the source edge and obliterates their signature flat saturation at low drain voltages. Here, we present high current density amorphous InGaZnO (a-IGZO) SGTs in a bottom contact architecture using Pt source and drain electrodes. The devices were fabricated by ensuring an oxygen-rich atmosphere to prevent the formation of oxygen vacancies at the Pt/a-IGZO interface. Incorporating a field relief structure within the source contact improves drain current saturation, toward behavior predicted by the saturation coefficient. In the device architecture considered, the screening was less effective for a field plate insulator thickness under 30 nm, possibly due to increased tunneling. Field plate incorporation is one of the strategies that ensures flat saturation and the suitability of contact-controlled transistors for a multitude of current driving and amplification applications.


  • Evidence of Improved Thermal Stability via Nanoscale Contact Engineering in IGZO Source-Gated Thin-Film Transistors

    by Salman Alfarisyi, Patryk Golec, Eva Bestelink, Kham M. Niang, Andrew J. Flewitt, S. Ravi P. Silva, Radu A. Sporea

    Despite rapidly expanding interest in thin-film source-gated transistors (SGTs), the high-temperature dependence of drain current (TDDC) in devices comprising Schottky source barriers is delaying wide adoption. To reduce this effect, alternative source designs have been theorized. Specifically, introducing additional nanoscale layers at the source contact should facilitate the tunneling of charge carriers at the Fermi energy level with negligible TDDC. Here, we fabricate amorphous In $_{\text{2}}$ Ga $_{\text{2}}$ ZnO $_{\text{7}}$ tunnel-contact SGTs (TC-SGTs) with three times lower TDDC than polysilicon transistors with Schottky contacts. Numerical simulations help elucidate the control mechanisms. We show that the potential profile across the semiconductor in the bulk of the source-gate overlap region determines injection current, and the introduction of a thin interfacial layer at the contact reduces the role of the contact metal work function (WF) in current control and associated temperature effects. This device architecture adds improved thermal stability to the long list of SGT benefits, including low voltage saturation, power-efficient operation, high intrinsic gain, device-to-device uniformity, and robustness to mechanical and electrical stress.


  • Open Access

    Multi-pulse atomic layer deposition of p-type SnO thin films: growth processes and the effect on TFT performance

    by Daisy E. Gomersall, Kham M. Niang, James David Parish, Zhuotong Sun, Andrew L. Johnson, Judith L. MacManus-Driscoll, Andrew J. Flewitt

    This work demonstrates p-type SnO thin film transistors, where the SnO active layers were deposited with atomic layer deposition (ALD) using the Sn(II) alkoxide precursor, Sn(II) bis(tert-butoxide). The deposition optimisation explores the use of multiple Sn pulses per ALD cycle and the use of an exposure mode (where the pump extraction is paused before the Sn precursor purge) to increase the residence time and allow for more effective saturation of the surface. The fabricated devices required post deposition annealing of the active layer, with device performance further improved by back-channel passivation using ALD Al2O3. The performance of devices deposited using the varying precursor delivery modes has also been compared, with the devices utilizing deposition with multiple Sn pulses and a post deposition anneal at 250°C achieving an on/off ratio of ∼4×104 and field effect mobility (μFE) of 0.6 cm2(Vs)-1. The growth processes present during deposition with the different precursor delivery modes was investigated using fractal geometry and topographical scaling methods, with the poor device performance for the single Sn pulse deposition attributed to 2D lateral island growth.


  • Open Access

    Effect of Plasma Treatment on Metal Oxide p–n Thin Film Diodes Fabricated at Room Temperature

    by Yin Jou Khong, Kham Man Niang, Sanggil Han, Nigel J. Coburn, Gwenhivir Wyatt‐Moon, Andrew J. Flewitt

    There is a need for a good quality thin film diode using a metal oxide p–n heterojunction as it is an essential component for the realization of flexible large‐area electronics. However, metal oxide‐based diodes normally show poor rectification characteristics whose origin is still poorly understood; this is holding back their use in various applications. A systematic study of the origins of the poor performance is performed based on bias‐stress measurements using a cuprous oxide (Cu2O)/amorphous zinc‐tin oxide (a‐ZTO) heterojunction as an example. This suggests that multiple carrier trapping and thermal release of carriers in defect states stemming from oxygen vacancies at the heterojunction interface is the primary cause of poor rectification. It is demonstrated that a plasma treatment is an effective way to optimize the population of oxygen vacancies at the heterojunction interface based on extensive material analyses, allowing a significant improvement in the diode performance with a much‐enhanced rectification ratio from ≈20 to 10 000, and a consequent facilitation of the next‐generation of ubiquitous electronics.