MRMarilene G. Sa Ribeiro

Marilene G. Sa Ribeiro

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marilene G. Sa Ribeiro has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Strength and thermal stability of enhanced metakaolin‐based geopolymer composites with sand and fibers

    by Ruy A. Sa Ribeiro, Marilene G. Sa Ribeiro, Devon M. Samuel, Ali Ozer, Prapassorn Numkiatsakul, Waltraud M. Kriven

    The growing demand for sustainable materials in construction and ceramics has driven interest in geopolymer technology as an eco‐friendly alternative to traditional cement‐based systems. Geopolymers, synthesized from aluminosilicate precursors like metakaolin, offer high mechanical performance, chemical resistance, and lower carbon footprints. This study presents the development of innovative metakaolin‐based geopolymer composites reinforced with natural mineral particles and fibers to enhance mechanical and functional properties while maintaining environmental sustainability. A tailored formulation combining commercial metakaolin, optimized waterglass, and a hybrid reinforcement strategy was employed. Three compositions were evaluated: (1) 20 wt.% ball‐milled fine sand and 40 wt.% Prairie fine sand (B20P40); (2) B20P40 with 5 wt.% basalt fibers (B20P40Bas5); and (3) B20P40 with 5 wt.% bamboo fibers (B20P40Bam5). The composites demonstrated flexural strengths of 12.1, 17.1, and 14.6 MPa, respectively, with corresponding apparent densities of 1.93, 1.88, and 1.81 g/cm 3 . Incorporation of natural fibers improved strength, ductility, and thermal stability, while reducing density, water absorption, and pore volume. The results indicate that these fiber‐reinforced geopolymer composites are promising candidates for sustainable construction and ceramic applications, offering a viable path toward high‐performance, low‐impact building materials.


  • Open Access

    Metakaolin-based geopolymer matrix formulations for higher strength and thermal stability

    by Ruy A. Sa Ribeiro, Marilene G. Sa Ribeiro, Devon M. Samuel, Ali Ozer, Prapassorn Numkiatsakul, Waltraud M. Kriven

    The need for sustainable and high-performance construction materials has led to the development of novel geopolymer matrices. This project aims to create an optimized, highly reactive, metakaolin-based geopolymer matrix for sustainable construction materials. The study involved mixing and optimizing commercial alkali silicates and metakaolin to enhance strength, stability, and durability. The goal was to maximize the flexural strength of the geopolymer matrix using one type of commercial metakaolin (MK), seven commercial waterglass formulations with varying water content, and a single, low-energy geopolymer processing method. The findings show that geopolymer matrices with charge-balancing potassium ions and 11 mol of water, and two formulations with charge-balancing sodium ions and 13 mol of water, resulted in the highest strengths (5.9–7.7–8.1 MPa on average), lower porosity, and reduced thermal degradation. These findings have practical applications in reducing the environmental impact of traditional construction materials. By utilizing metakaolin and commercial alkali silicates, the research enhances the mechanical properties of the geopolymer and promotes the use of industrial by-products. The low-energy processing method aligns with sustainability principles by minimizing energy consumption. The resulting geopolymer composites exhibit superior strength, durability, and thermal resistance, making them suitable for sustainable ceramics and construction materials. This research contributes to the development of eco-friendly construction solutions, promoting a sustainable and resilient built environment. Its significance lies in its holistic approach to optimizing geopolymer matrices for enhanced performance and sustainability.


  • Open Access

    Metakaolin‐based geopolymer mineral particulate composite design for higher strength and thermal stability

    by Ruy A. Sa Ribeiro, Marilene G. Sa Ribeiro, Devon M. Samuel, Ali Ozer, Prapassorn Numkiatsakul, Waltraud M. Kriven

    This research targets to produce new composites from a highly reactive metakaolin‐based geopolymer matrix reinforced with natural particles for use in sustainable ceramics, building and construction. Commercial waterglass and added mineral particles were optimized for geopolymer composites to provide higher strength, stability, and durability. The design method implicated higher flexural strength of one type of commercial metakaolin, one commercial waterglass formulation, a single‐low‐energy geopolymer processing, and seven types of added mineral particles. The particulate reinforcement formulations added to the geopolymer matrix were: (1) 20 wt% chamotte and 40 wt% Prairie fine sand; (2) 20 wt% chamotte and 40 wt% Quikrete medium sand; (3) 20 wt% chamotte and 40 wt% Quikrete fine sand; (4) 20 wt% ball‐milled fine sand; (5) 20 wt% ball‐milled fine sand and 40 wt% Quikrete fine sand; (6) 20 wt% ball‐milled fine sand and 40 wt% Prairie fine sand; (7) 10 wt% ball‐milled fine sand and 50 wt% Prairie fine sand. Potassium metasilicate Kasolv 16 with 11 M of water, Metamax metakaolin, reinforced with 20 wt% ball‐milled fine sand, and 40 wt% Prairie fine sand (BF20PF40) resulted in the highest strength geopolymer composite. BF20PF40 also yielded lower mass loss, higher packing density, and better thermal stability.


  • Open Access

    Regional metakaolin particle size reduction for higher strength geopolymer

    by Ruy A. Sa Ribeiro, Marilene G. Sa Ribeiro, Patrick F. Keane, Mauro R. Sardela, Pamela J. Sa Ribeiro, Waltraud M. Kriven

    The objective of this project was to further develop new composites and a testing program for the performance‐based specification for natural Amazonian geopolymer (GP) for use in ceramics and construction. While fly ash‐based alkali activated materials are now an established technology, metakaolin‐based GPs still need to be developed and optimized regarding the knowledge of the specific characteristics and properties of local resources. Amazonian kaolin was calcined into metakaolin (AMK). AMK particle size reduction for better reactive material was evaluated by means of dry and wet ball milling and sieving. Three types of metakaolin were analyzed for particle size distribution, and their size d 50 ranged from 7.9 to 2.8 µm. Further GP characterization followed physical and mechanical properties in flexural strength tests. In addition, scanning electron microscopy and energy dispersive spectroscopy were used to investigate the microstructure of the materials. Energy dispersive X‐ray fluorescence was used to measure the GP material composition. Analysis of the results revealed that the strength and stiffness of sodium–metakaolin‐based GP were inversely proportional to particle size. All distinct particle size GPs showed, in general, some increase in strength and stiffness within curing times ranging from 3 to 28 days.


  • Lateritic soil geopolymer composites for ceramics and engineering construction applications

    by Marilene G. Sá Ribeiro, Mauro R. Sardela, Patrick F. Keane, Juan S. Lopez, Waltraud M. Kriven, Ruy A. Sá Ribeiro

    Characterization of an Amazonian, laterite‐doped, kaolinitic soil (LK) or “lateritic soil” and laterite‐doped metakaolin (LMK) calcined at two distinct rates, as well as granite‐marble (GM) particulate industrial wastes was performed by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X‐ray diffraction (XRD), energy dispersive X‐ray fluorescence (XRF) spectrometry, and particle size and distribution analysis. In addition, an LMK geopolymer (GP) and a lateritic metakaolin‐based GP reinforced with granite‐marble composite (LMKGP‐GM) were tested for water resistance and for mechanical strength. XRD and XRF were used to investigate the composition of the composite materials, while XRD confirmed the formation of GP. Just as in the case of highly reactive commercial metakaolin used in construction, according to this study, lateritic soil‐based metakaolin presented similar characteristics. Therefore, it could be used in the development of more sustainable ceramics and construction materials, including the use of GM waste as a reinforcing phase/aggregate.


  • Open Access

    Amazonian Metakaolin Reactivity for Geopolymer Synthesis

    by Ruy A. Sá Ribeiro, Marilene G. Sá Ribeiro, Gregory P. Kutyla, Waltraud M. Kriven

    To determine the viability of using a local resource for geopolymer synthesis, geopolymers were synthesized using metakaolin made from clay mined in the Amazonian region of Brazil. Samples were made with mixed potassium-sodium and pure sodium metakaolin-based geopolymer. Samples were also made using commercial metakaolin (CMK) from BASF, Inc. as a comparison to the Amazonian metakaolin (AMK). Scanning electron microscopy was used to investigate the microstructure of the materials. X-ray diffraction was able to confirm the formation of geopolymer. The mechanical properties of AMK material were nearly equivalent to those based on CMK. Neither CMK nor AMK reacted completely, although samples made with CMK showed less unreacted material. By increasing the mixing intensity and duration, the amount of residual unreacted material was substantially reduced, and mechanical properties were improved.