Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bohong Zhang has a total of 120 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Femtosecond laser inscription of fiber Bragg gratings in lutetium oxide (Lu 2 O 3 ) single-crystal optical fiber for ultra-high-temperature sensing

    by Farhan Mumtaz, Ruimin Jie, Muhammad Subhan Bin Farhan, Kaihui Zhang, Tao Wang, Qi Li, Bohong Zhang, Chen Zhu, Jian Zhang, Zhitai Jia, et al.

    Lutetium oxide (Lu 2 O 3 ) single-crystal fibers represent a promising platform for extreme-environment optics, offering an exceptionally high melting point (~2450 °C) and a cubic crystal structure that avoids polarization-dependent effects associated with birefringent crystalline fibers such as sapphire. In this work, we demonstrate the first-ever, to the best of our knowledge, inscription of a fiber Bragg grating (FBG) in Lu₂O₃ single-crystal fiber using a femtosecond (fs) laser line-by-line technique. The fabricated Lu 2 O 3 FBG, when spliced to a standard silica interrogation network with a 0.46 dB coupling loss, exhibits a stable spectral response and reversible operation up to 1663 °C. The measured thermal sensitivity of 14.4 pm/°C at 1663 °C is approximately 50% lower than that of a comparable sapphire-based FBG. This reduced sensitivity effectively decreases the thermally induced spectral excursion per sensor, thereby alleviating spectral overlap constraints and potentially increasing the achievable multiplexing density within a fixed interrogation bandwidth. These results establish Lu₂O₃ single-crystal fibers as a viable ultrahigh-temperature sensing platform for high-density distributed sensing applications in aerospace, energy, and other high-temperature industrial environments.

  • Multiplexed Fabry-Pérot high-temperature sensing based on dispersive microwave-photonic frequency-time domain analysis

    by Ruimin Jie, Chen Zhu, Bohong Zhang, Koustav Dey, Jie Huang

    We propose and experimentally demonstrate a multiplexed high-temperature Fabry-Pérot (FP) fiber sensing system interrogated by dispersive microwave-photonic frequency-time domain analysis (DM-FTDA). In the proposed architecture, incoherent broadband probing light is modulated by radio-frequency (RF) signals and then reflected by a parallel network of hollow-core photonic crystal fiber FP (HCPCF-FP) sensors. A chirped fiber Bragg grating provides strong dispersion to map the composite FP spectral response into a well-defined microwave transfer function. Unlike conventional optical Fourier-domain multiplexing that requires deliberate cavity-length allocation, the proposed approach achieves multiplexing via delay-dominated discrimination. Distinct delay fibers are assigned to each sensor branch, and an inverse Fourier transform of the measured RF response produces separable time-domain features for individual sensors, enabling demodulation for sensors with closely matched cavity lengths. A three-sensor HCPCF-FP array is validated to ∼1000 °C, exhibiting linear time-shift responses, with worst-case apparent inter-channel crosstalk of 2.46% under the present drift conditions. These results establish DM-FTDA as a scalable microwave-photonic interrogation framework for multiplexed FP sensing in harsh thermal environments without complex optical acquisition.


  • High-temperature performance of femtosecond laser inscribed MgAl 2 O 4 spinel fiber Bragg gratings

    by Farhan Mumtaz, Kaihui Zhang, Tao Wang, Bohong Zhang, Chen Zhu, Laura Bartlett, Jeffrey D. Smith, Na Lin, Jian Zhang, Zhitai Jia, et al.

    This research reports the fabrication and comprehensive high-temperature performance assessment of fiber Bragg gratings (FBGs) inscribed in magnesium aluminum spinel (MgAl 2 O 4 ) single-crystal fibers (MSCFs) using femtosecond (Fs) laser point-by-point (PbP) and line-by-line (LbL) techniques. Individual MSCF-FBGs demonstrated short-term thermal stability up to 1600 °C. A 10-grating cascaded FBG array exhibited stable operation for over 180 h at 1200 °C in ambient air, highlighting its potential for highly multiplexed, quasi-distributed sensing in extreme environments. While 3-cascaded FBGs maintained stability at 1400 °C for approximately 50 h before degradation, this study provides crucial insights into the long-term reliability, operational limits, and degradation mechanisms of MSCF-FBGs under challenging high-temperature and oxidative conditions.

  • Sapphire Optical Fiber Bragg Grating Sensors based on Dispersive Microwave-photonic Frequency-Time Domain Analysis

    by Ruimin Jie, Chen Zhu, Farhan Mumtaz, Koustav Dey, Bohong Zhang, Jie Huang

    Sapphire fiber Bragg gratings (SFBGs) have attracted growing interest for high temperature sensing in harsh environments, yet their interrogation typically relies on optical spectrum measurements, demanding a high-resolution optical spectrum analyzer (OSA) that is bulky, expensive, and constrained in acquisition speed. Moreover, the inherently multimode nature of sapphire fiber further complicates spectrum-based demodulation, thereby limiting the achievable sensing resolution. In this paper, we propose and experimentally demonstrate a microwave-photonic interrogation approach for SFBG sensors. Instead of measuring the optical reflection spectrum, the complex frequency response in the microwave domain of an SFBG is acquired using a vector network analyzer (VNA) via a dispersive wavelength-to-delay mapping framework, followed by time-domain analysis to retrieve the sensing information. By applying an inverse Fourier transform and an energy-quantile delay estimator, temperature-induced Bragg wavelength shifts are robustly converted into measurable time shifts, even in the presence of multimode-induced spectral distortions. Temperature sensing from room temperature to 1050°C is experimentally validated, yielding a sensitivity of −0.0208 ns/°C at room temperature and a resolution of 0.02°C, corresponding to an approximately 20-fold improvement relative to a typical OSA-based interrogation. The proposed technique enables accurate frequency-time-domain demodulation without high-resolution optical spectrum acquisition and offers a practical route toward high-performance SFBG sensing systems.


  • Distributed Temperature Sensing in the Spray-Cooled Shell of a 150-Ton DC Electric Arc Furnace Using Brillouin Optical Fiber Technology

    by Farhan Mumtaz, Yeshwanth Reddy Mekala, Koustav Dey, Rony Kumer Saha, Ogbole Collins Inalegwu, Manoj Kumar Pullagura, Bohong Zhang, Muhammad Roman, Nicholas Dionise, Zane Voss, et al.

    This paper presents the deployment and validation of a Brillouin - distributed temperature sensing (DTS) system for real-time thermal monitoring of the spray-cooled upper shell of a 150-ton direct current Electric Arc Furnace (DC EAF) at Big River Steel Plant, Osceola, AR, USA. A four-channel Brillouin DTS system from OZ Optics was employed, with one active channel instrumented using an in-house-fabricated Brillouin scattering-depressed single-mode optical fiber (SMF28e+). The 60 m optical fiber sensor was fabricated, with 20 m allocated for thermal measurement and 40 m used as lead-in fiber to isolate the interrogator from the furnace environment. The fiber was nested in stainless steel (SS) tubing and bonded to the hot-face surface of the shell using thermally conductive epoxy. The system captured transient thermal events including burner activation and process-induced heating over multiple furnace cycles. DTS-acquired data were validated against resistance temperature detector (RTD) measurements, confirming consistent thermal trends and system accuracy. Prior to the industrial deployment, several mock-up tests were conducted. Laboratory calibration demonstrated a linear Brillouin frequency shift with temperature, with a sensitivity of approximately 1.19 °C/MHz up to 515 °C and R2 = 0.9988. Additional mock-up trials confirmed spatial resolution between 0.5 m and 1 m, with transmission and reflection spectra showing hotspot detection over sensing lengths up to 130 m. An averaging spatial step of 0.04 m was used, and acquisition sweep time was set to 1 min with a 10 MHz frequency step size and 10,000 averages. Monitoring the spray-cooled shell is critical in EAF operations due to its exposure to high thermal loads and susceptibility to localized overheating. Real-time hotspot detection and localization support proactive maintenance, reduce the risk of shell failure, and improve energy efficiency and operational safety. These findings underscore the potential of Brillouin - DTS systems to enable intelligent process control and predictive maintenance in next-generation steelmaking facilities.


  • Waveguide-Assisted Single-Mode Fiber Bragg Gratings in a Highly Multimode Coreless Fiber via Femtosecond Laser Inscription for Extreme Temperature Quasi-Distributed Thermal Sensing

    by Farhan Mumtaz, Koustav Dey, Bohong Zhang, Jeffrey D. Smith, Ronald J. O’MAlley, Jie Huang

    This research reports a potential quasi-distributed thermal mapping optical sensing system for extreme temperatures, leveraging femtosecond (FS) laser inscribed single-mode fiber Bragg gratings (FBGs) and a waveguide within coreless, highly multimode optical fiber, resulting in a single-mode structure. Unlike doped single-mode fibers, coreless fibers composed of silica rods prevent issues associated with dopant migration and ensure data accuracy. The strategic placement of point-by-point FBGs in a cascaded formation on the fs-laser inscribed waveguide facilitates localized multipoint sensing. The long-term stability of the proposed waveguide-assisted FBG system was assessed over 24 hours at elevated temperatures (1000 °C), showing no hysteresis during heating and cooling cycles. This approach promotes the use of single-mode waveguide-assisted cascaded FBG systems in extreme temperature environments. The point-by-point FBG writing technique via fs-laser enables rapid inscription compared to the conventional line-by-line method, providing fine control over the grating configuration and ensuring fast bulk production. The proposed device offers comprehensive temperature monitoring suitable for challenging multipoint sensing applications, such as industrial processes operating in extreme conditions.


  • Mitigating Hysteresis in Metal-Coated Fibers via Optimized Thermal Treatment for Advanced Distributed High-Temperature Sensing Applications

    by Koustav Dey, Rony Kumer Saha, Bohong Zhang, S. Narasimman, Farhan Mumtaz, Jeffrey D. Smith, Rex E. Gerald, Ronald J. O'MAlley, Jie Huang

    Metal-coated optical fibers are widely employed in sensing applications owing to their superior mechanical strength and corrosion resistance. However, their calibration at elevated temperatures is hindered by hysteresis, manifested as discrepancies between heating and cooling cycles, primarily caused by residual strain from mismatched thermal expansion coefficients (TECs) between the metal coating and silica cladding. This research introduces an optimal heat treatment procedure aimed at minimizing the impact of the mismatch in TECs between the cladding and the coating materials that causes the residual strain in gold (Au) and copper (Cu) coated fibers for achieving reliable distributed high temperature sensing up to 500 °C using Optical Frequency Domain Reflectometry (OFDR) technology. The treatment facilitates stress relaxation and microstructural modifications, including surface diffusion, grain growth and oxidation (for Cu coatings), which collectively induce partial interfacial delamination and thereby suppress hysteresis. This work presents the first comprehensive experimental study to systematically investigate and demonstrate the mitigation of hysteresis through an optimized heat treatment process and its underlying mechanisms in metal-coated fibers, supported by microstructural insights. The identified treatment range of 25–300 °C achieves substantial reductions in residual strain, lowering hysteresis effects by approximately 90.2% in Cu-coated fibers and 86.6% in Au-coated fibers. Furthermore, Au-coated fibers exhibit a consistently lower degree of hysteresis than Cu-coated fibers under comparable thermal conditions. Heat treatment also enhances temperature sensitivity, with improvements of approximately 28.9% for Cu-coated fibers and 6.6% for Au-coated fibers. Post-treatment strain analysis confirms maximum sustainable strain limits of ~6000 με for Au-coated fibers and ~12,000 με for Cu-coated fibers. Both fiber types also demonstrated excellent thermal stability, maintaining consistent performance across three heating cycles between 25 °C and 300 °C over a 20-hour period. Collectively, the findings not only advance the scientific understanding of residual strain relaxation mechanisms but also provide a practical route toward robust, precise, and reliable distributed sensing for demanding industrial environments such as the steel, oil and gas sectors.


  • Electrified vapour deposition at ultrahigh temperature and atmospheric pressure for nanomaterials synthesis

    by Xizheng Wang, Ning Liu, Zhennan Huang, Ji Yang, Gang Chen, Boyang Li, Ti Xie, Sean Overa, Alexandra H Brozena, Tangyuan Li, et al.