Jeffrey D. Smith
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jeffrey D. Smith has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Jie Huang
Missouri University of Science and Technology
13 shared publications - Ronald J. O’malley
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO, USA
13 shared publications - Rex E. Gerald
Department of Electrical and Computer Engineering, Missouri University of Science and Technology, Rolla, MO, USA
10 shared publications - Bohong Zhang
Department of Electrical and Computer Engineering, Missouri University of Science and Technology, Rolla, MO, USA
9 shared publications - Farhan Mumtaz
Department of Electrical and Computer Engineering, Missouri University of Science and Technology, Rolla, MO, USA
9 shared publications - Hanok Tekle
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO, USA
5 shared publications
Latest Publications
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-12
Distributed Temperature Sensing in the Spray-Cooled Shell of a 150-Ton DC Electric Arc Furnace Using Brillouin Optical Fiber Technology
This paper presents the deployment and validation of a Brillouin - distributed temperature sensing (DTS) system for real-time thermal monitoring of the spray-cooled upper shell of a 150-ton direct current Electric Arc Furnace (DC EAF) at Big River Steel Plant, Osceola, AR, USA. A four-channel Brillouin DTS system from OZ Optics was employed, with one active channel instrumented using an in-house-fabricated Brillouin scattering-depressed single-mode optical fiber (SMF28e+). The 60 m optical fiber sensor was fabricated, with 20 m allocated for thermal measurement and 40 m used as lead-in fiber to isolate the interrogator from the furnace environment. The fiber was nested in stainless steel (SS) tubing and bonded to the hot-face surface of the shell using thermally conductive epoxy. The system captured transient thermal events including burner activation and process-induced heating over multiple furnace cycles. DTS-acquired data were validated against resistance temperature detector (RTD) measurements, confirming consistent thermal trends and system accuracy. Prior to the industrial deployment, several mock-up tests were conducted. Laboratory calibration demonstrated a linear Brillouin frequency shift with temperature, with a sensitivity of approximately 1.19 °C/MHz up to 515 °C and R2 = 0.9988. Additional mock-up trials confirmed spatial resolution between 0.5 m and 1 m, with transmission and reflection spectra showing hotspot detection over sensing lengths up to 130 m. An averaging spatial step of 0.04 m was used, and acquisition sweep time was set to 1 min with a 10 MHz frequency step size and 10,000 averages. Monitoring the spray-cooled shell is critical in EAF operations due to its exposure to high thermal loads and susceptibility to localized overheating. Real-time hotspot detection and localization support proactive maintenance, reduce the risk of shell failure, and improve energy efficiency and operational safety. These findings underscore the potential of Brillouin - DTS systems to enable intelligent process control and predictive maintenance in next-generation steelmaking facilities.
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-12
Distributed Temperature Sensing in the Spray-Cooled Shell of a 150-Ton DC Electric Arc Furnace Using Brillouin Optical Fiber Technology
This paper presents the deployment and validation of a Brillouin - distributed temperature sensing (DTS) system for real-time thermal monitoring of the spray-cooled upper shell of a 150-ton direct current Electric Arc Furnace (DC EAF) at Big River Steel Plant, Osceola, AR, USA. A four-channel Brillouin DTS system from OZ Optics was employed, with one active channel instrumented using an in-house-fabricated Brillouin scattering-depressed single-mode optical fiber (SMF28e+). The 60 m optical fiber sensor was fabricated, with 20 m allocated for thermal measurement and 40 m used as lead-in fiber to isolate the interrogator from the furnace environment. The fiber was nested in stainless steel (SS) tubing and bonded to the hot-face surface of the shell using thermally conductive epoxy. The system captured transient thermal events including burner activation and process-induced heating over multiple furnace cycles. DTS-acquired data were validated against resistance temperature detector (RTD) measurements, confirming consistent thermal trends and system accuracy. Prior to the industrial deployment, several mock-up tests were conducted. Laboratory calibration demonstrated a linear Brillouin frequency shift with temperature, with a sensitivity of approximately 1.19 °C/MHz up to 515 °C and R2 = 0.9988. Additional mock-up trials confirmed spatial resolution between 0.5 m and 1 m, with transmission and reflection spectra showing hotspot detection over sensing lengths up to 130 m. An averaging spatial step of 0.04 m was used, and acquisition sweep time was set to 1 min with a 10 MHz frequency step size and 10,000 averages. Monitoring the spray-cooled shell is critical in EAF operations due to its exposure to high thermal loads and susceptibility to localized overheating. Real-time hotspot detection and localization support proactive maintenance, reduce the risk of shell failure, and improve energy efficiency and operational safety. These findings underscore the potential of Brillouin - DTS systems to enable intelligent process control and predictive maintenance in next-generation steelmaking facilities.
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (8) , 3241-3250
Waveguide-Assisted Single-Mode Fiber Bragg Gratings in a Highly Multimode Coreless Fiber via Femtosecond Laser Inscription for Extreme Temperature Quasi-Distributed Thermal Sensing
This research reports a potential quasi-distributed thermal mapping optical sensing system for extreme temperatures, leveraging femtosecond (FS) laser inscribed single-mode fiber Bragg gratings (FBGs) and a waveguide within coreless, highly multimode optical fiber, resulting in a single-mode structure. Unlike doped single-mode fibers, coreless fibers composed of silica rods prevent issues associated with dopant migration and ensure data accuracy. The strategic placement of point-by-point FBGs in a cascaded formation on the fs-laser inscribed waveguide facilitates localized multipoint sensing. The long-term stability of the proposed waveguide-assisted FBG system was assessed over 24 hours at elevated temperatures (1000 °C), showing no hysteresis during heating and cooling cycles. This approach promotes the use of single-mode waveguide-assisted cascaded FBG systems in extreme temperature environments. The point-by-point FBG writing technique via fs-laser enables rapid inscription compared to the conventional line-by-line method, providing fine control over the grating configuration and ensuring fast bulk production. The proposed device offers comprehensive temperature monitoring suitable for challenging multipoint sensing applications, such as industrial processes operating in extreme conditions.
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (8) , 3241-3250
Waveguide-Assisted Single-Mode Fiber Bragg Gratings in a Highly Multimode Coreless Fiber via Femtosecond Laser Inscription for Extreme Temperature Quasi-Distributed Thermal Sensing
This research reports a potential quasi-distributed thermal mapping optical sensing system for extreme temperatures, leveraging femtosecond (FS) laser inscribed single-mode fiber Bragg gratings (FBGs) and a waveguide within coreless, highly multimode optical fiber, resulting in a single-mode structure. Unlike doped single-mode fibers, coreless fibers composed of silica rods prevent issues associated with dopant migration and ensure data accuracy. The strategic placement of point-by-point FBGs in a cascaded formation on the fs-laser inscribed waveguide facilitates localized multipoint sensing. The long-term stability of the proposed waveguide-assisted FBG system was assessed over 24 hours at elevated temperatures (1000 °C), showing no hysteresis during heating and cooling cycles. This approach promotes the use of single-mode waveguide-assisted cascaded FBG systems in extreme temperature environments. The point-by-point FBG writing technique via fs-laser enables rapid inscription compared to the conventional line-by-line method, providing fine control over the grating configuration and ensuring fast bulk production. The proposed device offers comprehensive temperature monitoring suitable for challenging multipoint sensing applications, such as industrial processes operating in extreme conditions.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-18
Mitigating Hysteresis in Metal-Coated Fibers via Optimized Thermal Treatment for Advanced Distributed High-Temperature Sensing Applications
Metal-coated optical fibers are widely employed in sensing applications owing to their superior mechanical strength and corrosion resistance. However, their calibration at elevated temperatures is hindered by hysteresis, manifested as discrepancies between heating and cooling cycles, primarily caused by residual strain from mismatched thermal expansion coefficients (TECs) between the metal coating and silica cladding. This research introduces an optimal heat treatment procedure aimed at minimizing the impact of the mismatch in TECs between the cladding and the coating materials that causes the residual strain in gold (Au) and copper (Cu) coated fibers for achieving reliable distributed high temperature sensing up to 500 °C using Optical Frequency Domain Reflectometry (OFDR) technology. The treatment facilitates stress relaxation and microstructural modifications, including surface diffusion, grain growth and oxidation (for Cu coatings), which collectively induce partial interfacial delamination and thereby suppress hysteresis. This work presents the first comprehensive experimental study to systematically investigate and demonstrate the mitigation of hysteresis through an optimized heat treatment process and its underlying mechanisms in metal-coated fibers, supported by microstructural insights. The identified treatment range of 25–300 °C achieves substantial reductions in residual strain, lowering hysteresis effects by approximately 90.2% in Cu-coated fibers and 86.6% in Au-coated fibers. Furthermore, Au-coated fibers exhibit a consistently lower degree of hysteresis than Cu-coated fibers under comparable thermal conditions. Heat treatment also enhances temperature sensitivity, with improvements of approximately 28.9% for Cu-coated fibers and 6.6% for Au-coated fibers. Post-treatment strain analysis confirms maximum sustainable strain limits of ~6000 με for Au-coated fibers and ~12,000 με for Cu-coated fibers. Both fiber types also demonstrated excellent thermal stability, maintaining consistent performance across three heating cycles between 25 °C and 300 °C over a 20-hour period. Collectively, the findings not only advance the scientific understanding of residual strain relaxation mechanisms but also provide a practical route toward robust, precise, and reliable distributed sensing for demanding industrial environments such as the steel, oil and gas sectors.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-18
Mitigating Hysteresis in Metal-Coated Fibers via Optimized Thermal Treatment for Advanced Distributed High-Temperature Sensing Applications
Metal-coated optical fibers are widely employed in sensing applications owing to their superior mechanical strength and corrosion resistance. However, their calibration at elevated temperatures is hindered by hysteresis, manifested as discrepancies between heating and cooling cycles, primarily caused by residual strain from mismatched thermal expansion coefficients (TECs) between the metal coating and silica cladding. This research introduces an optimal heat treatment procedure aimed at minimizing the impact of the mismatch in TECs between the cladding and the coating materials that causes the residual strain in gold (Au) and copper (Cu) coated fibers for achieving reliable distributed high temperature sensing up to 500 °C using Optical Frequency Domain Reflectometry (OFDR) technology. The treatment facilitates stress relaxation and microstructural modifications, including surface diffusion, grain growth and oxidation (for Cu coatings), which collectively induce partial interfacial delamination and thereby suppress hysteresis. This work presents the first comprehensive experimental study to systematically investigate and demonstrate the mitigation of hysteresis through an optimized heat treatment process and its underlying mechanisms in metal-coated fibers, supported by microstructural insights. The identified treatment range of 25–300 °C achieves substantial reductions in residual strain, lowering hysteresis effects by approximately 90.2% in Cu-coated fibers and 86.6% in Au-coated fibers. Furthermore, Au-coated fibers exhibit a consistently lower degree of hysteresis than Cu-coated fibers under comparable thermal conditions. Heat treatment also enhances temperature sensitivity, with improvements of approximately 28.9% for Cu-coated fibers and 6.6% for Au-coated fibers. Post-treatment strain analysis confirms maximum sustainable strain limits of ~6000 με for Au-coated fibers and ~12,000 με for Cu-coated fibers. Both fiber types also demonstrated excellent thermal stability, maintaining consistent performance across three heating cycles between 25 °C and 300 °C over a 20-hour period. Collectively, the findings not only advance the scientific understanding of residual strain relaxation mechanisms but also provide a practical route toward robust, precise, and reliable distributed sensing for demanding industrial environments such as the steel, oil and gas sectors.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-12
Distributed Sapphire Fiber Bragg Grating-Based Thermal Profiling of Submerged Entry Nozzles
This research focuses on the application of sapphire fiber Bragg gratings (FBGs) for instrumentation in submerged entry nozzles (SEN) within the steelmaking industry. The SEN is pivotal for transferring molten steel from a tundish to a mold, while preventing the infiltration of oxygen and nitrogen from the surrounding environment. Maintaining optimal flow conditions in the mold is crucial for ensuring casting process stability and maintaining high quality steel. Sapphire FBG sensors have been instrumented in SENs to enable distributed thermal mapping for monitoring the health of the SEN. The optical sensor comprises three cascaded sapphire FBGs inscribed using femtosecond laser technology into a one-meter-long sapphire crystalline fiber. The sensor underwent characterization in a laboratory setting up to 1600°C and was tested for long-term stability over 40 hours under extreme environmental conditions. The coupling between silica and sapphire fibers was investigated and implemented during sensor packaging. The sensor successfully captured the pre-heat sequence of the SEN in real-world steelmaking operations. Compared to conventional thermocouples, sapphire FBG sensors demonstrated exceptional efficiency and precision. They offer potential benefits such as increased productivity, reduced energy consumption, and minimized carbon footprint in the steel industry.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-12
Distributed Sapphire Fiber Bragg Grating-Based Thermal Profiling of Submerged Entry Nozzles
This research focuses on the application of sapphire fiber Bragg gratings (FBGs) for instrumentation in submerged entry nozzles (SEN) within the steelmaking industry. The SEN is pivotal for transferring molten steel from a tundish to a mold, while preventing the infiltration of oxygen and nitrogen from the surrounding environment. Maintaining optimal flow conditions in the mold is crucial for ensuring casting process stability and maintaining high quality steel. Sapphire FBG sensors have been instrumented in SENs to enable distributed thermal mapping for monitoring the health of the SEN. The optical sensor comprises three cascaded sapphire FBGs inscribed using femtosecond laser technology into a one-meter-long sapphire crystalline fiber. The sensor underwent characterization in a laboratory setting up to 1600°C and was tested for long-term stability over 40 hours under extreme environmental conditions. The coupling between silica and sapphire fibers was investigated and implemented during sensor packaging. The sensor successfully captured the pre-heat sequence of the SEN in real-world steelmaking operations. Compared to conventional thermocouples, sapphire FBG sensors demonstrated exceptional efficiency and precision. They offer potential benefits such as increased productivity, reduced energy consumption, and minimized carbon footprint in the steel industry.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-12
Advancing Temperature Monitoring of the Bottom Anode in a Direct Current Electric Arc Furnace Operations With Distributed Optical Fiber Sensors
The bottom anode in the Direct Current Electric Arc Furnace (DC EAF) is critical for completing the electrical circuit necessary for sustaining the arc within the furnace. For pin-type bottom anodes, monitoring of the temperature of select pins instrumented with thermocouples is performed to track bottom wear in the EAF and inform the operator when the furnace should be removed from service. This work presents the results from a plant trial using distributed temperature monitoring of bottom anode pins in a 165-ton DC EAF over a two-month service period utilizing two optical fiber sensing techniques: fiber Bragg grating (FBG) and Rayleigh backscattering (RBS). The early detection of temperature anomalies along the length of the anode pin through distributed sensing enhances operational safety, providing a robust alternative to traditional thermocouples.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-12
Advancing Temperature Monitoring of the Bottom Anode in a Direct Current Electric Arc Furnace Operations With Distributed Optical Fiber Sensors
The bottom anode in the Direct Current Electric Arc Furnace (DC EAF) is critical for completing the electrical circuit necessary for sustaining the arc within the furnace. For pin-type bottom anodes, monitoring of the temperature of select pins instrumented with thermocouples is performed to track bottom wear in the EAF and inform the operator when the furnace should be removed from service. This work presents the results from a plant trial using distributed temperature monitoring of bottom anode pins in a 165-ton DC EAF over a two-month service period utilizing two optical fiber sensing techniques: fiber Bragg grating (FBG) and Rayleigh backscattering (RBS). The early detection of temperature anomalies along the length of the anode pin through distributed sensing enhances operational safety, providing a robust alternative to traditional thermocouples.
- Open Access
- 22 May 2025
- Published by Elsevier in Acta Astronautica
- Vol. 235, 17-28
Extraction of Aluminum from Lunar Regolith through Molten Salt Electrolysis
- 22 May 2025
- Published by Elsevier in Acta Astronautica
- Vol. 235, 17-28
Open AccessExtraction of Aluminum from Lunar Regolith through Molten Salt Electrolysis
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Discrimination of Temperature and Strain by Characterizing Two Femtosecond Laser-Written Coincident Sapphire Fiber Bragg Gratings for Harsh Environment Applications
In this study, two co-incident sapphire fiber Bragg gratings (SFBGs) were successfully inscribed utilizing a femtosecond (fs) laser to achieve a high fringe contrast interferogram. These two SFBGs employ a unique configuration, one parallel to the center axis, called p-SFBG, and the other forming an angle from the center-axis, called a-SFBG, allowing for simultaneous strain and temperature measurements with low cross-talk. As a proof of concept, p-SFBG and a-SFBG using line-by-line method are characterized, which are shorter in length (i.e., 1.5 mm), producing reflectivity of ~3dB. This effort demonstrates the use of two coincident SFBGs forming an angle of 2.29° between them within an extremely highly multimode sapphire fiber. The p-SFBG exhibits superior strain sensitivity (1.8 pm/με) in contrast to the a-SFBG (0.4 pm/με). Their efficacy was evaluated under applied strains reaching up to 1000 με. Both SFBGs underwent thorough characterization for long-term stability at elevated temperatures, enduring exposure at 1600°C for 24 hours. The novelty of the sensor lies in the fact that a-SFBG exhibits extremely low sensitivity compared to p-SFBG, which plays an important role in eliminating the cross-talk between co-incident SFBGs. This configuration addresses challenges related to temperature and strain crosstalk, facilitating simultaneous measurements via sensitivity matrix in harsh environmental conditions. This achievement represents a significant advancement in the field of optical sensing, paving new avenues for simultaneous temperature and strain measurement, particularly for applications in harsh environments.
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Discrimination of Temperature and Strain by Characterizing Two Femtosecond Laser-Written Coincident Sapphire Fiber Bragg Gratings for Harsh Environment Applications
In this study, two co-incident sapphire fiber Bragg gratings (SFBGs) were successfully inscribed utilizing a femtosecond (fs) laser to achieve a high fringe contrast interferogram. These two SFBGs employ a unique configuration, one parallel to the center axis, called p-SFBG, and the other forming an angle from the center-axis, called a-SFBG, allowing for simultaneous strain and temperature measurements with low cross-talk. As a proof of concept, p-SFBG and a-SFBG using line-by-line method are characterized, which are shorter in length (i.e., 1.5 mm), producing reflectivity of ~3dB. This effort demonstrates the use of two coincident SFBGs forming an angle of 2.29° between them within an extremely highly multimode sapphire fiber. The p-SFBG exhibits superior strain sensitivity (1.8 pm/με) in contrast to the a-SFBG (0.4 pm/με). Their efficacy was evaluated under applied strains reaching up to 1000 με. Both SFBGs underwent thorough characterization for long-term stability at elevated temperatures, enduring exposure at 1600°C for 24 hours. The novelty of the sensor lies in the fact that a-SFBG exhibits extremely low sensitivity compared to p-SFBG, which plays an important role in eliminating the cross-talk between co-incident SFBGs. This configuration addresses challenges related to temperature and strain crosstalk, facilitating simultaneous measurements via sensitivity matrix in harsh environmental conditions. This achievement represents a significant advancement in the field of optical sensing, paving new avenues for simultaneous temperature and strain measurement, particularly for applications in harsh environments.
- 16 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-12
Distributed Sensing for Early Detection of Water Leakages in the Burner Area of an Electric Arc Furnace Using Optical Fiber Sensors
This study introduces an innovative approach to enhance safety in Electric Arc Furnaces (EAFs) through the integration of optical fiber sensors (OFS) in the refractory lining bricks’ assembly. By demonstrating the significant benefits of OFS, we showcase its effectiveness in continuous thermal monitoring and location profiling within the EAF refractory lining. The work focuses on detecting the onset of water leakage in the vicinity of the burner of an EAF, with thermal data resolution up to 1.3 mm. The instrumented OFS in this work were able to detect volumes of water leaks (from a controlled water drip pipe with flow rates ≥ 2.3 cc/min) at temperatures > 500 °C, indicating their potential for promptly identifying and informing maintenance actions. Prompt maintenance actions would help to mitigate catastrophic consequences of water leakages such as steam explosions. Further, proactively addressing water leakage issues can extend furnace lifespan and the overall safety of EAF operations. Therefore, our work aims to enhance safety and minimize downtime and maintenance costs by providing distributed and real-time thermal profiling solutions to the water leakage concerns in the refractory lining bricks’ assembly around the burner of an EAF.
- 16 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-12
Distributed Sensing for Early Detection of Water Leakages in the Burner Area of an Electric Arc Furnace Using Optical Fiber Sensors
This study introduces an innovative approach to enhance safety in Electric Arc Furnaces (EAFs) through the integration of optical fiber sensors (OFS) in the refractory lining bricks’ assembly. By demonstrating the significant benefits of OFS, we showcase its effectiveness in continuous thermal monitoring and location profiling within the EAF refractory lining. The work focuses on detecting the onset of water leakage in the vicinity of the burner of an EAF, with thermal data resolution up to 1.3 mm. The instrumented OFS in this work were able to detect volumes of water leaks (from a controlled water drip pipe with flow rates ≥ 2.3 cc/min) at temperatures > 500 °C, indicating their potential for promptly identifying and informing maintenance actions. Prompt maintenance actions would help to mitigate catastrophic consequences of water leakages such as steam explosions. Further, proactively addressing water leakage issues can extend furnace lifespan and the overall safety of EAF operations. Therefore, our work aims to enhance safety and minimize downtime and maintenance costs by providing distributed and real-time thermal profiling solutions to the water leakage concerns in the refractory lining bricks’ assembly around the burner of an EAF.
- Open Access
- 5 March 2024
- Published by Elsevier in Computational Particle Mechanics
- Vol. 11 (5) , 2035-2042
Kinetic modeling of dust grain dynamics in electrostatic sieving
- 5 March 2024
- Published by Elsevier in Computational Particle Mechanics
- Vol. 11 (5) , 2035-2042
Open AccessKinetic modeling of dust grain dynamics in electrostatic sieving
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Ultrafast Annealing Improves SNR and Long-Term Stability of a Highly Multiplexed Line-by-Line FBG Array Inscribed by Femtosecond Laser in a Coreless Fiber for Extreme-Temperature Applications
This study reports the fabrication of an 4th-order line-by-line Fiber Bragg Gratings (FBG) array using femtosecond laser inscription within a highly multimode coreless optical fiber, with a particular focus on achieving substantial multiplexing capabilities. An ultra-fast annealing procedure is employed, resulting in an impressive enhancement of the FBG sensor’s fringe visibility by approximately 13 dB, signifying a notable improvement of approximately ~4 dB. This substantial enhancement contributes to the long-term stability and performance of the multiplexed FBG array in extreme temperature conditions. The systematic fabrication approach employed for the multiplexed FBG array guarantees a high signal-to-noise ratio (SNR) for each individual FBG within the array. This FBG array is intended for extreme temperature applications, addressing limitations associated with traditional FBGs based on doped optical fibers, including SNR degradation and temperature-induced fringe drift. Testing at temperatures up to 1120°C demonstrates the FBG array’s stability without fluctuations in readings. Furthermore, it endures seven heat cycles, spanning from 500°C to 1120°C, over 60 hours, exhibiting outstanding thermal stability. This highly multiplexed FBG array with an ultra-fast annealing approach holds promise for extreme temperature environments, such as steelmaking, where precise and reliable distributed temperature monitoring is imperative.
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Ultrafast Annealing Improves SNR and Long-Term Stability of a Highly Multiplexed Line-by-Line FBG Array Inscribed by Femtosecond Laser in a Coreless Fiber for Extreme-Temperature Applications
This study reports the fabrication of an 4th-order line-by-line Fiber Bragg Gratings (FBG) array using femtosecond laser inscription within a highly multimode coreless optical fiber, with a particular focus on achieving substantial multiplexing capabilities. An ultra-fast annealing procedure is employed, resulting in an impressive enhancement of the FBG sensor’s fringe visibility by approximately 13 dB, signifying a notable improvement of approximately ~4 dB. This substantial enhancement contributes to the long-term stability and performance of the multiplexed FBG array in extreme temperature conditions. The systematic fabrication approach employed for the multiplexed FBG array guarantees a high signal-to-noise ratio (SNR) for each individual FBG within the array. This FBG array is intended for extreme temperature applications, addressing limitations associated with traditional FBGs based on doped optical fibers, including SNR degradation and temperature-induced fringe drift. Testing at temperatures up to 1120°C demonstrates the FBG array’s stability without fluctuations in readings. Furthermore, it endures seven heat cycles, spanning from 500°C to 1120°C, over 60 hours, exhibiting outstanding thermal stability. This highly multiplexed FBG array with an ultra-fast annealing approach holds promise for extreme temperature environments, such as steelmaking, where precise and reliable distributed temperature monitoring is imperative.