Kodanda Rama Rao Chebattina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kodanda Rama Rao Chebattina has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Vadapalli Srinivas
GITAM (Deemed to be university)
14 shared publications - Gandhi Pullagura
Department of Mechanical Engineering, GITAM (Deemed to be University), School of Technology, Visakhapatnam, India
11 shared publications - Joga Rao Bikkavolu
Department of Mechanical Engineering, Godavari Institute of Engineering and Technology (A), Rajahmundry, India
9 shared publications - Debabrata Barik
Department of Mechanical Engineering, Karpagam Academy of Higher Education, Coimbatore, India
3 shared publications - Vanthala Varaha Siva Prasad
Department of Marine Engineering, Andhra University, Visakhapatnam, India
3 shared publications - Pathem Uma Chaithanya
Baba Farid University of Health Sciences
2 shared publications
Latest Publications
- 17 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (5) , 1700
Analyzing neopentyl glycol ester blends for improvement of engine oil tribological properties
The goal of the study was to evaluate the effect of blending Neopentyl Glycol (NPG) Esters (from Calophyllum Inophyllum Oil (Tamanu Oil) with Pebax(R) commercial engine oils. NPG Esters are easily renewable, carbon-neutral, and environmentally friendly alternatives to petroleum-based lubricants and were particularly sought after for their superior performance as lubricants. Engine oils were mixed with NPGEsters in various concentrations (5% to 30% v/v), and then carefully evaluated for their tribological properties. Comparison of the tribological properties of the engine oils changed with NPG Esters showed that the added bio-lubricants would enhance the tribological performance of the base oils by at least 25% over typical base oil viscosity recommendations. However, the modified engine oil also showed significant decreases in both wear and friction coefficients compared to the recommended concentrations. The addition of NPG Esters proves that the use of NPG Esters can increase the performance of commercial engine oils through improved tribological properties while also providing a sustainable and environmentally responsible choice for future lubrication applications.
- 17 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (5) , 1700
Analyzing neopentyl glycol ester blends for improvement of engine oil tribological properties
The goal of the study was to evaluate the effect of blending Neopentyl Glycol (NPG) Esters (from Calophyllum Inophyllum Oil (Tamanu Oil) with Pebax(R) commercial engine oils. NPG Esters are easily renewable, carbon-neutral, and environmentally friendly alternatives to petroleum-based lubricants and were particularly sought after for their superior performance as lubricants. Engine oils were mixed with NPGEsters in various concentrations (5% to 30% v/v), and then carefully evaluated for their tribological properties. Comparison of the tribological properties of the engine oils changed with NPG Esters showed that the added bio-lubricants would enhance the tribological performance of the base oils by at least 25% over typical base oil viscosity recommendations. However, the modified engine oil also showed significant decreases in both wear and friction coefficients compared to the recommended concentrations. The addition of NPG Esters proves that the use of NPG Esters can increase the performance of commercial engine oils through improved tribological properties while also providing a sustainable and environmentally responsible choice for future lubrication applications.
- 10 April 2026
- Published by Wiley in Heat Transfer
- Vol. 55 (5) , 3154-3176
Sustainable Diesel Alternative in CRDI Engine: Performance, Emissions, Energy, and Exergy Analysis of Pyrolysis Oil Blends With Diethyl Ether and Graphene Nanoplatelets
The performance of a compression ignition (CI) engine could be improved by incorporating waste materials such as waste high density plastic oil (HDPO) and diesel blends by dispersing various non‐metallic, carbon‐based additives (graphene nanoplatelets [GNPs]) and higher alcohols (di‐ethyl ether (DEE)) in recent days. In the present investigation, waste plastic oil (WPO) is prepared and blended with diesel to produce the WP20 sample. The WP20 sample is mixed with additives DEE at 10% Vol. and GNPs at concentrations of 25, 50, and 75 mg/L and tested on a four stroke, twin cylinder, common rail direct injection (CRDI), CI engine to evaluate performance, emissions and thermodynamic irreversibilities as per first and second law including energy and exergy efficiency, and sustainability index (SI). The inclusion of additives improved brake thermal efficiency (BTE) by 15.54%, and decreased brake specific fuel consumption (BSFC) by 16.5%. While emissions including carbon monoxide (CO), carbon dioxide (CO 2 ), hydrocarbon (HC), nitrogen oxide (NOx), and smoke are decreased by 9.27%, 13%, 9.89%, 9.30%, and 8.68% respectively for WP20 + DEE10 + GNP50 sample than the WP20 mix at higher BP. Furthermore, the energy and exergy efficiencies, sustainability index (SI), and (EPC) are enhanced by 7.89, 16.7%, 18.95%, and 8.77%, respectively. According to the 2nd law of thermodynamics (TD), the energy and exergy losses (exhaust gas, cooling water, and unaccounted losses) are reduced, indicating the WP20 + DEE10 + GNP50 blend is sustainable and suitable in diesel engines as an alternative fuel.
- 10 April 2026
- Published by Wiley in Heat Transfer
- Vol. 55 (5) , 3154-3176
Sustainable Diesel Alternative in CRDI Engine: Performance, Emissions, Energy, and Exergy Analysis of Pyrolysis Oil Blends With Diethyl Ether and Graphene Nanoplatelets
The performance of a compression ignition (CI) engine could be improved by incorporating waste materials such as waste high density plastic oil (HDPO) and diesel blends by dispersing various non‐metallic, carbon‐based additives (graphene nanoplatelets [GNPs]) and higher alcohols (di‐ethyl ether (DEE)) in recent days. In the present investigation, waste plastic oil (WPO) is prepared and blended with diesel to produce the WP20 sample. The WP20 sample is mixed with additives DEE at 10% Vol. and GNPs at concentrations of 25, 50, and 75 mg/L and tested on a four stroke, twin cylinder, common rail direct injection (CRDI), CI engine to evaluate performance, emissions and thermodynamic irreversibilities as per first and second law including energy and exergy efficiency, and sustainability index (SI). The inclusion of additives improved brake thermal efficiency (BTE) by 15.54%, and decreased brake specific fuel consumption (BSFC) by 16.5%. While emissions including carbon monoxide (CO), carbon dioxide (CO 2 ), hydrocarbon (HC), nitrogen oxide (NOx), and smoke are decreased by 9.27%, 13%, 9.89%, 9.30%, and 8.68% respectively for WP20 + DEE10 + GNP50 sample than the WP20 mix at higher BP. Furthermore, the energy and exergy efficiencies, sustainability index (SI), and (EPC) are enhanced by 7.89, 16.7%, 18.95%, and 8.77%, respectively. According to the 2nd law of thermodynamics (TD), the energy and exergy losses (exhaust gas, cooling water, and unaccounted losses) are reduced, indicating the WP20 + DEE10 + GNP50 blend is sustainable and suitable in diesel engines as an alternative fuel.
- 23 July 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (8) , 7463-7480
Predicting Common Rail Direct Injection (CRDI) engine metrics using nanoparticle-enhanced pongamia pinnata biodiesel with machine learning
- 23 July 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (8) , 7463-7480
Predicting Common Rail Direct Injection (CRDI) engine metrics using nanoparticle-enhanced pongamia pinnata biodiesel with machine learning
- Open Access
- 14 August 2024
- Published by Taylor & Francis in Cogent Engineering
- Vol. 11 (1)
Physicochemical and corrosion properties of polyol ester-commercial motorbike oil blends
- 14 August 2024
- Published by Taylor & Francis in Cogent Engineering
- Vol. 11 (1)
Open AccessPhysicochemical and corrosion properties of polyol ester-commercial motorbike oil blends
- 20 January 2024
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 26 (7) , 2235-2257
Amplifying performance attributes of biodiesel–diesel blends through hydrogen infusion and graphene oxide nanoparticles in a diesel engine
- 20 January 2024
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 26 (7) , 2235-2257
Amplifying performance attributes of biodiesel–diesel blends through hydrogen infusion and graphene oxide nanoparticles in a diesel engine
- 27 September 2023
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 45 (4) , 11619-11636
Investigation of the effect of adding carbon nanotubes, lower and higher level alcohol additives, in Yellow oleander methyl ester-diesel blend on diesel engine performance
- 27 September 2023
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 45 (4) , 11619-11636
Investigation of the effect of adding carbon nanotubes, lower and higher level alcohol additives, in Yellow oleander methyl ester-diesel blend on diesel engine performance
- Open Access
- 9 June 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (26) , 17575-17586
Physico-chemical and tribological properties of commercial oil – bio-lubricant mixtures dispersed with graphene nanoplatelets
This study focuses on the physicochemical and tribological properties of bio-lubricants and commercial lubricant blends dispersed with graphene nanoplatelets. In the processing of the bio lubricant, special care was taken to ensure that the physicochemical properties do not deteriorate too much when the bio lubricant is blended with commercial oil. Calophyllum inophyllum (Tamanu tree) seed oil was used to prepare a penta-erythritol (PE) ester. The PE ester was mixed with commercial SN motor oil at 10, 20, 30 & 40% v/v concentrations. The oil samples are tested on a four-ball wear tester to see how well they perform under wear, friction, and extreme pressure conditions. The optimum blend of PE ester – commercial SN motor oil for the best performance is found in the first phase. Later the optimum blend of commercial oil and bio-lubricant is dispersed with graphene nanoplatelets in 0.025%, 0.05%, 0.1%, 0.25%, 0.5% and 1% weight fractions. A blend ratio of 30% bio-lubricant in commercial oil dispersed with 0.05% graphene nanoplatelets dramatically reduces friction and wear. During the extreme pressure test, commercial oil, and bio-lubricant blends performed better in load-carrying capacity and welding force, indicating an improved load-wear index. These improved properties due to the dispersion of graphene nanoplatelets could facilitate the use of a higher blend percentage of bio lubricant. Analysis of the worn surfaces after the EP test showed that bio lubricant, additives, and graphene worked together in the blend of bio lubricant and commercial oil.
- 9 June 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (26) , 17575-17586
Open AccessPhysico-chemical and tribological properties of commercial oil – bio-lubricant mixtures dispersed with graphene nanoplatelets
This study focuses on the physicochemical and tribological properties of bio-lubricants and commercial lubricant blends dispersed with graphene nanoplatelets. In the processing of the bio lubricant, special care was taken to ensure that the physicochemical properties do not deteriorate too much when the bio lubricant is blended with commercial oil. Calophyllum inophyllum (Tamanu tree) seed oil was used to prepare a penta-erythritol (PE) ester. The PE ester was mixed with commercial SN motor oil at 10, 20, 30 & 40% v/v concentrations. The oil samples are tested on a four-ball wear tester to see how well they perform under wear, friction, and extreme pressure conditions. The optimum blend of PE ester – commercial SN motor oil for the best performance is found in the first phase. Later the optimum blend of commercial oil and bio-lubricant is dispersed with graphene nanoplatelets in 0.025%, 0.05%, 0.1%, 0.25%, 0.5% and 1% weight fractions. A blend ratio of 30% bio-lubricant in commercial oil dispersed with 0.05% graphene nanoplatelets dramatically reduces friction and wear. During the extreme pressure test, commercial oil, and bio-lubricant blends performed better in load-carrying capacity and welding force, indicating an improved load-wear index. These improved properties due to the dispersion of graphene nanoplatelets could facilitate the use of a higher blend percentage of bio lubricant. Analysis of the worn surfaces after the EP test showed that bio lubricant, additives, and graphene worked together in the blend of bio lubricant and commercial oil.