Gandhi Pullagura
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gandhi Pullagura has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Debabrata Barik
Department of Mechanical Engineering, Karpagam Academy of Higher Education, Coimbatore, India
12 shared publications - Joga Rao Bikkavolu
Department of Mechanical Engineering, Godavari Institute of Engineering and Technology (A), Rajahmundry, India
11 shared publications - Kodanda Rama Rao Chebattina
GITAM University
11 shared publications - Vadapalli Srinivas
GITAM (Deemed to be university)
8 shared publications Joga Rao Bikkavolu
Department of Mechanical Engineering, Godavari Global University, Rajamahendravaram, 533296, India
7 shared publicationsSrinivas Vadapalli
Department of Mechanical Engineering, GITAM School of Technology, Visakhapatnam, India 530045
6 shared publications
Latest Publications
- 17 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (5) , 1700
Analyzing neopentyl glycol ester blends for improvement of engine oil tribological properties
The goal of the study was to evaluate the effect of blending Neopentyl Glycol (NPG) Esters (from Calophyllum Inophyllum Oil (Tamanu Oil) with Pebax(R) commercial engine oils. NPG Esters are easily renewable, carbon-neutral, and environmentally friendly alternatives to petroleum-based lubricants and were particularly sought after for their superior performance as lubricants. Engine oils were mixed with NPGEsters in various concentrations (5% to 30% v/v), and then carefully evaluated for their tribological properties. Comparison of the tribological properties of the engine oils changed with NPG Esters showed that the added bio-lubricants would enhance the tribological performance of the base oils by at least 25% over typical base oil viscosity recommendations. However, the modified engine oil also showed significant decreases in both wear and friction coefficients compared to the recommended concentrations. The addition of NPG Esters proves that the use of NPG Esters can increase the performance of commercial engine oils through improved tribological properties while also providing a sustainable and environmentally responsible choice for future lubrication applications.
- 17 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (5) , 1700
Analyzing neopentyl glycol ester blends for improvement of engine oil tribological properties
The goal of the study was to evaluate the effect of blending Neopentyl Glycol (NPG) Esters (from Calophyllum Inophyllum Oil (Tamanu Oil) with Pebax(R) commercial engine oils. NPG Esters are easily renewable, carbon-neutral, and environmentally friendly alternatives to petroleum-based lubricants and were particularly sought after for their superior performance as lubricants. Engine oils were mixed with NPGEsters in various concentrations (5% to 30% v/v), and then carefully evaluated for their tribological properties. Comparison of the tribological properties of the engine oils changed with NPG Esters showed that the added bio-lubricants would enhance the tribological performance of the base oils by at least 25% over typical base oil viscosity recommendations. However, the modified engine oil also showed significant decreases in both wear and friction coefficients compared to the recommended concentrations. The addition of NPG Esters proves that the use of NPG Esters can increase the performance of commercial engine oils through improved tribological properties while also providing a sustainable and environmentally responsible choice for future lubrication applications.
- Open Access
- 28 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16
Effects of EGR and Fe₃O₄ nanoadditives on performance of a variable compression ratio diesel engine fueled with tamarind biodiesel
The rising demand for energy and the rapid depletion of fossil fuels underscore the need for sustainable alternatives that can ensure efficient engine operation while meeting emission regulations, such as biodiesel. Tamarind seed biodiesel has emerged as a renewable option; however, its tendency to increase nitrogen oxide (NOx) emissions restricts its large-scale application in the automotive industry. This study explored an innovative approach that integrates magnetite (Fe₃O₄) nanoparticle additives with exhaust gas recirculation (EGR) to enhance combustion, performance, and emission characteristics of a variable compression ratio (VCR) diesel engine. Experimental investigations were performed on a single-cylinder engine using TB20 (20% tamarind biodiesel and 80% diesel) and its nano-enhanced blends containing 50 ppm (TB20N50) and 100 ppm (TB20N100) of Fe₃O₄ under loads from 0% to 100% with EGR rates of 0%, 10%, and 20%. The results demonstrated that the addition of Fe₃O₄ nanoparticles enhanced the brake thermal efficiency by 2.61% and reduced the specific fuel consumption by 3.34% for TB20N100 relative to TB20. The combustion characteristics also improved, with the cylinder pressure and heat release rate increasing by 2.5–5% when nanoadditives were used. In terms of emissions, NOx levels were significantly reduced by 25.5–56.3% at higher EGR rates. CO emissions decreased by approximately 18% with nanoparticle addition, although the application of EGR led to a 20–40% increase in CO and HC emissions at high loads. Smoke opacity decreased by nearly 3% for the nanoblends but increased by up to 7% at higher EGR levels. The synergistic use of Fe₃O₄ nanoparticles and controlled EGR provides an effective strategy for optimizing biodiesel-fueled engines. This innovative approach demonstrates the potential of tamarind biodiesel nanoblends to balance efficiency and emissions, offering a sustainable pathway toward cleaner engine technologies.
- 28 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16
Open AccessEffects of EGR and Fe₃O₄ nanoadditives on performance of a variable compression ratio diesel engine fueled with tamarind biodiesel
The rising demand for energy and the rapid depletion of fossil fuels underscore the need for sustainable alternatives that can ensure efficient engine operation while meeting emission regulations, such as biodiesel. Tamarind seed biodiesel has emerged as a renewable option; however, its tendency to increase nitrogen oxide (NOx) emissions restricts its large-scale application in the automotive industry. This study explored an innovative approach that integrates magnetite (Fe₃O₄) nanoparticle additives with exhaust gas recirculation (EGR) to enhance combustion, performance, and emission characteristics of a variable compression ratio (VCR) diesel engine. Experimental investigations were performed on a single-cylinder engine using TB20 (20% tamarind biodiesel and 80% diesel) and its nano-enhanced blends containing 50 ppm (TB20N50) and 100 ppm (TB20N100) of Fe₃O₄ under loads from 0% to 100% with EGR rates of 0%, 10%, and 20%. The results demonstrated that the addition of Fe₃O₄ nanoparticles enhanced the brake thermal efficiency by 2.61% and reduced the specific fuel consumption by 3.34% for TB20N100 relative to TB20. The combustion characteristics also improved, with the cylinder pressure and heat release rate increasing by 2.5–5% when nanoadditives were used. In terms of emissions, NOx levels were significantly reduced by 25.5–56.3% at higher EGR rates. CO emissions decreased by approximately 18% with nanoparticle addition, although the application of EGR led to a 20–40% increase in CO and HC emissions at high loads. Smoke opacity decreased by nearly 3% for the nanoblends but increased by up to 7% at higher EGR levels. The synergistic use of Fe₃O₄ nanoparticles and controlled EGR provides an effective strategy for optimizing biodiesel-fueled engines. This innovative approach demonstrates the potential of tamarind biodiesel nanoblends to balance efficiency and emissions, offering a sustainable pathway toward cleaner engine technologies.
- 10 April 2026
- Published by Wiley in Heat Transfer
- Vol. 55 (5) , 3154-3176
Sustainable Diesel Alternative in CRDI Engine: Performance, Emissions, Energy, and Exergy Analysis of Pyrolysis Oil Blends With Diethyl Ether and Graphene Nanoplatelets
The performance of a compression ignition (CI) engine could be improved by incorporating waste materials such as waste high density plastic oil (HDPO) and diesel blends by dispersing various non‐metallic, carbon‐based additives (graphene nanoplatelets [GNPs]) and higher alcohols (di‐ethyl ether (DEE)) in recent days. In the present investigation, waste plastic oil (WPO) is prepared and blended with diesel to produce the WP20 sample. The WP20 sample is mixed with additives DEE at 10% Vol. and GNPs at concentrations of 25, 50, and 75 mg/L and tested on a four stroke, twin cylinder, common rail direct injection (CRDI), CI engine to evaluate performance, emissions and thermodynamic irreversibilities as per first and second law including energy and exergy efficiency, and sustainability index (SI). The inclusion of additives improved brake thermal efficiency (BTE) by 15.54%, and decreased brake specific fuel consumption (BSFC) by 16.5%. While emissions including carbon monoxide (CO), carbon dioxide (CO 2 ), hydrocarbon (HC), nitrogen oxide (NOx), and smoke are decreased by 9.27%, 13%, 9.89%, 9.30%, and 8.68% respectively for WP20 + DEE10 + GNP50 sample than the WP20 mix at higher BP. Furthermore, the energy and exergy efficiencies, sustainability index (SI), and (EPC) are enhanced by 7.89, 16.7%, 18.95%, and 8.77%, respectively. According to the 2nd law of thermodynamics (TD), the energy and exergy losses (exhaust gas, cooling water, and unaccounted losses) are reduced, indicating the WP20 + DEE10 + GNP50 blend is sustainable and suitable in diesel engines as an alternative fuel.
- 10 April 2026
- Published by Wiley in Heat Transfer
- Vol. 55 (5) , 3154-3176
Sustainable Diesel Alternative in CRDI Engine: Performance, Emissions, Energy, and Exergy Analysis of Pyrolysis Oil Blends With Diethyl Ether and Graphene Nanoplatelets
The performance of a compression ignition (CI) engine could be improved by incorporating waste materials such as waste high density plastic oil (HDPO) and diesel blends by dispersing various non‐metallic, carbon‐based additives (graphene nanoplatelets [GNPs]) and higher alcohols (di‐ethyl ether (DEE)) in recent days. In the present investigation, waste plastic oil (WPO) is prepared and blended with diesel to produce the WP20 sample. The WP20 sample is mixed with additives DEE at 10% Vol. and GNPs at concentrations of 25, 50, and 75 mg/L and tested on a four stroke, twin cylinder, common rail direct injection (CRDI), CI engine to evaluate performance, emissions and thermodynamic irreversibilities as per first and second law including energy and exergy efficiency, and sustainability index (SI). The inclusion of additives improved brake thermal efficiency (BTE) by 15.54%, and decreased brake specific fuel consumption (BSFC) by 16.5%. While emissions including carbon monoxide (CO), carbon dioxide (CO 2 ), hydrocarbon (HC), nitrogen oxide (NOx), and smoke are decreased by 9.27%, 13%, 9.89%, 9.30%, and 8.68% respectively for WP20 + DEE10 + GNP50 sample than the WP20 mix at higher BP. Furthermore, the energy and exergy efficiencies, sustainability index (SI), and (EPC) are enhanced by 7.89, 16.7%, 18.95%, and 8.77%, respectively. According to the 2nd law of thermodynamics (TD), the energy and exergy losses (exhaust gas, cooling water, and unaccounted losses) are reduced, indicating the WP20 + DEE10 + GNP50 blend is sustainable and suitable in diesel engines as an alternative fuel.
- Open Access
- 14 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 39958
Machine learning based prediction of the performance and emission characteristics of CRDI diesel engine using diethyl ether and carbon nanotube additives with Spirulina platensis as a third-generation biofuel
Alternative fuels are required to provide the world’s energy demands due to excessive fossil fuel use, harmful petrol emissions, environmental pollution, growing demand, rising costs, and fossil fuel degradation. The additives are utilized in biodiesel-diesel blends because they partially meet the physicochemical and thermal properties, resulting in improved combustion, performance, and reduced emissions. This research aims to enhance performance metrics and minimize emissions by incorporating diethyl ether (DEE) and single walled carbon nanotube (CNT) nanoparticles (NPs) into a Spirulina platensis (SP) microalgae-based biodiesel-diesel blend at various injection pressures (IPs). The prepared blends are homogeneous and consistent, as analyzed by characterization using FTIR, XRD, FESEM, EDX, and Raman spectrum analysis. The prepared samples are tested on a two-cylinder, four-stroke, Common Rail Direct Injection (CRDI) diesel engine. The findings revealed that the Brake Thermal Efficiency (BTE) is improved by 15% while the Brake Specific Fuel Consumption (BSFC), Hydrocarbon (HC), Carbon Monoxide (CO), Nitrogen Oxide (NOx), and smoke opacity are reduced by 13.5, 20.7, 39.5, 20.6, and 9.7%, respectively, for the TF + CNT50 sample at higher IP and Brake Mean Effective Pressure (BMEP). The fuel sample TF + CNT50 was shown to be more sustainable and suitable for use in multi-cylinder, CRDI diesel engines without engine modifications. Furthermore, Machine Learning (ML) methods such as Support Vector Regression (SVR), Random Forest (RF), and Decision Tree (DT) are used for accurately predicting engine performance and emission characteristics by analyzing the correlations between input and output data. Simulating these interactions improves engine design and reduces experimentation costs.
- 14 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 39958
Open AccessMachine learning based prediction of the performance and emission characteristics of CRDI diesel engine using diethyl ether and carbon nanotube additives with Spirulina platensis as a third-generation biofuel
Alternative fuels are required to provide the world’s energy demands due to excessive fossil fuel use, harmful petrol emissions, environmental pollution, growing demand, rising costs, and fossil fuel degradation. The additives are utilized in biodiesel-diesel blends because they partially meet the physicochemical and thermal properties, resulting in improved combustion, performance, and reduced emissions. This research aims to enhance performance metrics and minimize emissions by incorporating diethyl ether (DEE) and single walled carbon nanotube (CNT) nanoparticles (NPs) into a Spirulina platensis (SP) microalgae-based biodiesel-diesel blend at various injection pressures (IPs). The prepared blends are homogeneous and consistent, as analyzed by characterization using FTIR, XRD, FESEM, EDX, and Raman spectrum analysis. The prepared samples are tested on a two-cylinder, four-stroke, Common Rail Direct Injection (CRDI) diesel engine. The findings revealed that the Brake Thermal Efficiency (BTE) is improved by 15% while the Brake Specific Fuel Consumption (BSFC), Hydrocarbon (HC), Carbon Monoxide (CO), Nitrogen Oxide (NOx), and smoke opacity are reduced by 13.5, 20.7, 39.5, 20.6, and 9.7%, respectively, for the TF + CNT50 sample at higher IP and Brake Mean Effective Pressure (BMEP). The fuel sample TF + CNT50 was shown to be more sustainable and suitable for use in multi-cylinder, CRDI diesel engines without engine modifications. Furthermore, Machine Learning (ML) methods such as Support Vector Regression (SVR), Random Forest (RF), and Decision Tree (DT) are used for accurately predicting engine performance and emission characteristics by analyzing the correlations between input and output data. Simulating these interactions improves engine design and reduces experimentation costs.
- Open Access
- 7 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Machine learning based analysis of diesel engine performance using Fe₃O₄ nanoadditive in sterculia foetida biodiesel blend
This investigation examines the influence of Fe₃O₄ (magnetite) nano additions in sterculia foetida methyl ester (SME) mixtures on diesel engine performance, combustion, and emissions. SME was produced using transesterification and dispersed with surface modified Fe₃O₄ nanoparticles (NPs) employing probe-type ultrasonication to achieve uniform distribution. Engine tests were performed using pure diesel, a 25% SME blend-75% diesel (SME25), and Fe₃O₄ dispersed SME25 blends at concentrations of 50, 75, and 100 ppm. The results showed that the engine performance measures such as brake thermal efficiency (BTE) increased by 6.69% and specific fuel consumption (SFC) reduced by 7.23% for SME + 100Fe sample than SME25 mix. For the same blend, combustion metrics, such as cylinder pressure (CP) and heat release rate (HRR), increased by 4.46% and 24.21% respectively. Furthermore, at greater loads, the SME25 + 100Fe mix reduced carbon monoxide (CO), hydrocarbon (HC), nitrogen oxide (NOx), and smoke emissions by 23.92%, 22.42%, 5.38%, and 3.61%, respectively. A machine learning (ML) based computational model was created to predict engine performance and emission characteristics across various nano fuel blends. The model achieved great prediction accuracy, with correlation coefficients (R) ranging from 0.9973 to 0.99995 and Root Mean Squared Error (RMSE) and Mean Absolute Percentage Error (MAPE) values within acceptable bounds. The study confirms that Fe₃O₄ nano fuel blends improve engine efficiency, decrease emissions, and benefit from the integration of ML for accurate and data-efficient performance modelling. This technique is found to be potential for sustainable fuel technologies.
- 7 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Open AccessMachine learning based analysis of diesel engine performance using Fe₃O₄ nanoadditive in sterculia foetida biodiesel blend
This investigation examines the influence of Fe₃O₄ (magnetite) nano additions in sterculia foetida methyl ester (SME) mixtures on diesel engine performance, combustion, and emissions. SME was produced using transesterification and dispersed with surface modified Fe₃O₄ nanoparticles (NPs) employing probe-type ultrasonication to achieve uniform distribution. Engine tests were performed using pure diesel, a 25% SME blend-75% diesel (SME25), and Fe₃O₄ dispersed SME25 blends at concentrations of 50, 75, and 100 ppm. The results showed that the engine performance measures such as brake thermal efficiency (BTE) increased by 6.69% and specific fuel consumption (SFC) reduced by 7.23% for SME + 100Fe sample than SME25 mix. For the same blend, combustion metrics, such as cylinder pressure (CP) and heat release rate (HRR), increased by 4.46% and 24.21% respectively. Furthermore, at greater loads, the SME25 + 100Fe mix reduced carbon monoxide (CO), hydrocarbon (HC), nitrogen oxide (NOx), and smoke emissions by 23.92%, 22.42%, 5.38%, and 3.61%, respectively. A machine learning (ML) based computational model was created to predict engine performance and emission characteristics across various nano fuel blends. The model achieved great prediction accuracy, with correlation coefficients (R) ranging from 0.9973 to 0.99995 and Root Mean Squared Error (RMSE) and Mean Absolute Percentage Error (MAPE) values within acceptable bounds. The study confirms that Fe₃O₄ nano fuel blends improve engine efficiency, decrease emissions, and benefit from the integration of ML for accurate and data-efficient performance modelling. This technique is found to be potential for sustainable fuel technologies.
- Open Access
- 14 October 2025
- Published by Wiley in Energy Science & Engineering
- Vol. 13 (12) , 6383-6399
Unveiling the Role of Nanoparticles in Biodiesel Blends: A Comprehensive Energy‐Exergy‐Sustainability Analysis for CI Engine Optimization
The unsatisfactory engine performance can be enhanced by the fuel reformulation technique in which the nano additives are included in the B20 (20% of methyl ester mixed in 80% of diesel) sample. In the present study, a novel nano additive such as Aluminium oxide (Al 2 O 3 ), Graphene Oxide (GO), and Carbon Nanotubes (CNTs) are added in B20 mix (20% Vol. of Yellow Oleander Methyl Ester (YOME) is blended in 80% Vol. of standard diesel) and employed on a single cylinder, four stroke, diesel engine. The study is focused on evaluating the Energy (E), Exergy (ex), and sustainability index (SI) through the energy and exergy distributions using first and second laws of Thermodynamics (TD) for the prepared fuel samples, including D100, B20, B20A50, B20GO50, and B20CNT50. The engine operated with the prepared blends at standard conditions such as Compression Ratio (CR) (17.5:1), Rated speed (1500 rpm), Injection Timing (IT) (23° bTDC), and Injection Pressure (IP) (220 bar). The nano‐assisted fuel samples showed enhanced performance characteristics (Brake Thermal Efficiency (BTE) increased by 15.94%, and Brake Specific Fuel Consumption (BSFC) reduced by 20.5%) Energy, and Exergy efficiencies (η E , η ex ), SI, and Exergy Performance Coefficient (EPC) by 33.6, 23.6, 7.14, and 13.7, %, respectively, for B20CNT50 blend at higher Brake Power (BP). The blend B20CNT50 proved to be a more promising fuel sample than the remaining fuel mixtures in a significant variation in engine performance, Energy (E), exergy (ex), and SI. It is not just a promising alternative but also a more sustainable and effective energy source to use with nano‐assisted biodiesel‐diesel blends. This article recommends more investigations and research into engine optimization and the development of sustainable energy alternatives.
- 14 October 2025
- Published by Wiley in Energy Science & Engineering
- Vol. 13 (12) , 6383-6399
Open AccessUnveiling the Role of Nanoparticles in Biodiesel Blends: A Comprehensive Energy‐Exergy‐Sustainability Analysis for CI Engine Optimization
The unsatisfactory engine performance can be enhanced by the fuel reformulation technique in which the nano additives are included in the B20 (20% of methyl ester mixed in 80% of diesel) sample. In the present study, a novel nano additive such as Aluminium oxide (Al 2 O 3 ), Graphene Oxide (GO), and Carbon Nanotubes (CNTs) are added in B20 mix (20% Vol. of Yellow Oleander Methyl Ester (YOME) is blended in 80% Vol. of standard diesel) and employed on a single cylinder, four stroke, diesel engine. The study is focused on evaluating the Energy (E), Exergy (ex), and sustainability index (SI) through the energy and exergy distributions using first and second laws of Thermodynamics (TD) for the prepared fuel samples, including D100, B20, B20A50, B20GO50, and B20CNT50. The engine operated with the prepared blends at standard conditions such as Compression Ratio (CR) (17.5:1), Rated speed (1500 rpm), Injection Timing (IT) (23° bTDC), and Injection Pressure (IP) (220 bar). The nano‐assisted fuel samples showed enhanced performance characteristics (Brake Thermal Efficiency (BTE) increased by 15.94%, and Brake Specific Fuel Consumption (BSFC) reduced by 20.5%) Energy, and Exergy efficiencies (η E , η ex ), SI, and Exergy Performance Coefficient (EPC) by 33.6, 23.6, 7.14, and 13.7, %, respectively, for B20CNT50 blend at higher Brake Power (BP). The blend B20CNT50 proved to be a more promising fuel sample than the remaining fuel mixtures in a significant variation in engine performance, Energy (E), exergy (ex), and SI. It is not just a promising alternative but also a more sustainable and effective energy source to use with nano‐assisted biodiesel‐diesel blends. This article recommends more investigations and research into engine optimization and the development of sustainable energy alternatives.
- Open Access
- 10 October 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 75
Performance and emission analysis of CRDI diesel engine using methyl ester derived from Spirulina platensis as a third-generation biofuel
- 10 October 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 75
Open AccessPerformance and emission analysis of CRDI diesel engine using methyl ester derived from Spirulina platensis as a third-generation biofuel
- 23 July 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (8) , 7463-7480
Predicting Common Rail Direct Injection (CRDI) engine metrics using nanoparticle-enhanced pongamia pinnata biodiesel with machine learning
- 23 July 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (8) , 7463-7480
Predicting Common Rail Direct Injection (CRDI) engine metrics using nanoparticle-enhanced pongamia pinnata biodiesel with machine learning
- 31 December 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 143, 389-402
Employing hydrogen infusion to improve the combustion attributes of Di-methyl carbonate-boron nitride-biodiesel/diesel blends in a diesel engine
- 31 December 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 143, 389-402
Employing hydrogen infusion to improve the combustion attributes of Di-methyl carbonate-boron nitride-biodiesel/diesel blends in a diesel engine
- Open Access
- 26 November 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 65
Exposure the role of hydrogen with algae spirogyra biodiesel and fuel-borne additive on a diesel engine: An experimental assessment on dual fuel combustion mode
- 26 November 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 65
Open AccessExposure the role of hydrogen with algae spirogyra biodiesel and fuel-borne additive on a diesel engine: An experimental assessment on dual fuel combustion mode