Wen Shi
Wen Shi has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Zhigang Shuai
Tsinghua University
13 shared publications - Gang Wu
Institute of High Performance Computing
12 shared publications - Dong Wang
Laboratory of Flexible Electronics Technology, Tsinghua University, Beijing, China
10 shared publications - Shuo-Wang Yang
Institute of High Performance Computing Agency for Science, Technology and Research 1 Fusionopolis Way #16-16 138632 Connexis Singapore
9 shared publications - Tianqi Deng
State Key Laboratory of Silicon and Advanced Semiconductor Materials and School of Materials Science and Engineering, Zhejiang University 1 , Hangzhou 310027
9 shared publications - Jian-Sheng Wang
National University of Singapore
7 shared publications
Latest Publications
- 5 February 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 103 (7) , 075410
Ab initio dipolar electron-phonon interactions in two-dimensional materials
We develop an ab initio formalism for dipolar electron-phonon interactions (EPIs) in two-dimensional (2D) materials. Unlike the purely longitudinal Fröhlich model, we show that the out-of-plane dipoles also contribute to the long-wavelength nonanalytical behavior of EPIs. And the 2D dipolar EPI plays an important role not only in the typical polar material , but also in graphane and fluorinated graphene. By incorporating this formalism into Wannier-Fourier interpolation, we enable accurate EPI calculations for 2D materials and subsequent intrinsic carrier mobility prediction. The results show that the Fröhlich model is inadequate for 2D materials and a correct long-wavelength interaction must be included for a reliable prediction.- 5 February 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 103 (7) , 075410
Ab initio dipolar electron-phonon interactions in two-dimensional materials
We develop an ab initio formalism for dipolar electron-phonon interactions (EPIs) in two-dimensional (2D) materials. Unlike the purely longitudinal Fröhlich model, we show that the out-of-plane dipoles also contribute to the long-wavelength nonanalytical behavior of EPIs. And the 2D dipolar EPI plays an important role not only in the typical polar material , but also in graphane and fluorinated graphene. By incorporating this formalism into Wannier-Fourier interpolation, we enable accurate EPI calculations for 2D materials and subsequent intrinsic carrier mobility prediction. The results show that the Fröhlich model is inadequate for 2D materials and a correct long-wavelength interaction must be included for a reliable prediction.- 3 December 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (9)
Unravelling the Molecular Origin of Organic Semiconductors with High‐Performance Thermoelectric Response
A decisive prerequisite toward systematic development of high‐efficiency organic thermoelectric materials is not only thoroughly understanding the microscopic physical processes controlling the performance, but also precisely correlating such processes and the macroscopic properties to the basic chemical structures. Here, by using multiscale first‐principles calculations, the interplay among thermoelectric properties, microscopic transport parameters, and molecular structures for the whole family of small‐molecule organic thermoelectric materials is rationalized, and general molecular design principles are concurrently formulated. It is unveiled that thermoelectric power factor of a wide variety of molecular semiconductors is directly proportional to a unified quality factor, and high‐performance thermoelectric response demands to boost the intermolecular electronic coupling, and to suppress the interaction of electron with lattice vibrations. Furthermore, it is uncovered that extending the π‐conjugated backbones along the long axis, and maximizing the networks of intermolecular S···S or CH···π contacts meet the proposed material design rule.
- 3 December 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (9)
Unravelling the Molecular Origin of Organic Semiconductors with High‐Performance Thermoelectric Response
A decisive prerequisite toward systematic development of high‐efficiency organic thermoelectric materials is not only thoroughly understanding the microscopic physical processes controlling the performance, but also precisely correlating such processes and the macroscopic properties to the basic chemical structures. Here, by using multiscale first‐principles calculations, the interplay among thermoelectric properties, microscopic transport parameters, and molecular structures for the whole family of small‐molecule organic thermoelectric materials is rationalized, and general molecular design principles are concurrently formulated. It is unveiled that thermoelectric power factor of a wide variety of molecular semiconductors is directly proportional to a unified quality factor, and high‐performance thermoelectric response demands to boost the intermolecular electronic coupling, and to suppress the interaction of electron with lattice vibrations. Furthermore, it is uncovered that extending the π‐conjugated backbones along the long axis, and maximizing the networks of intermolecular S···S or CH···π contacts meet the proposed material design rule.
- 14 October 2020
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 3 (10) , 10174-10182
Strain Effects on the n-Type Thermoelectric Performance of the Small-Molecule Organic Semiconductor 2-5-Difluoro-7,7,8,8-Tetracyanoquinodimethane
- 14 October 2020
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 3 (10) , 10174-10182
Strain Effects on the n-Type Thermoelectric Performance of the Small-Molecule Organic Semiconductor 2-5-Difluoro-7,7,8,8-Tetracyanoquinodimethane
- 28 September 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (41) , 21852-21861
Theoretical search for high-performance thermoelectric donor–acceptor copolymers: the role of super-exchange couplings
Donor–acceptor (D–A) copolymers are a type of prototypical conducting conjugated polymers with remarkably high mobility approaching 100 cm2 V−1 s−1, making them potential thermoelectric (TE) candidates. However, only limited pioneering experimental studies have been devoted to obtaining a microscopic understanding of the relationship between the atomic structure and TE properties of D–A copolymers, which hampered the effort to enhance their TE performance. As such, our work seeks to establish a comprehensive understanding of the intrinsic electronic, geometric, and TE properties of a series of D–A copolymer chains. By using density functional theory methods combined with Boltzmann transport and deformation potential theories, we found the strong intra-chain superexchange (SE) coupling to be a key indicator for high mobility and TE performance. Strong SE couplings induce not only small hole effective mass but also weak electron–phonon couplings, resulting in high mobility and high power factors. Furthermore, we provide a route to establish strong SE coupling and optimize the TE performance by minimizing the energy difference between the frontier molecular orbitals of the donor and acceptor moieties. Our work thus provides strong indications that D–A copolymers represent a class of systems with high potential in TE applications.
- 28 September 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (41) , 21852-21861
Theoretical search for high-performance thermoelectric donor–acceptor copolymers: the role of super-exchange couplings
Donor–acceptor (D–A) copolymers are a type of prototypical conducting conjugated polymers with remarkably high mobility approaching 100 cm2 V−1 s−1, making them potential thermoelectric (TE) candidates. However, only limited pioneering experimental studies have been devoted to obtaining a microscopic understanding of the relationship between the atomic structure and TE properties of D–A copolymers, which hampered the effort to enhance their TE performance. As such, our work seeks to establish a comprehensive understanding of the intrinsic electronic, geometric, and TE properties of a series of D–A copolymer chains. By using density functional theory methods combined with Boltzmann transport and deformation potential theories, we found the strong intra-chain superexchange (SE) coupling to be a key indicator for high mobility and TE performance. Strong SE couplings induce not only small hole effective mass but also weak electron–phonon couplings, resulting in high mobility and high power factors. Furthermore, we provide a route to establish strong SE coupling and optimize the TE performance by minimizing the energy difference between the frontier molecular orbitals of the donor and acceptor moieties. Our work thus provides strong indications that D–A copolymers represent a class of systems with high potential in TE applications.
- 2 July 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (30) , 34451-34461
Observation of Energy-Dependent Carrier Scattering in Conducting Polymer Nanowire Blends for Enhanced Thermoelectric Performance
Without sacrificing the intrinsic softness and flexibility of conducting polymers, their blends have been demonstrated to be promising to improve thermoelectric properties of conducting polymers. However, the underlying mechanism for the thermoelectric enhancement is hitherto far from clear and is worthy of being explored deeply. In this work, we report novel conducting polymer nanowires blends by physically mixing poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires and polypyrrole (PPy) nanowires. By carefully tuning the energetic structure of PPy nanowires (nanofillers), the Seebeck coefficients and power factors of nanowire blends are surprisingly increased by ~20% and ~32% (compared to PEDOT nanowires), respectively. By means of first-principle calculations and experimental characterizations, we qualitatively confirm that the improved thermoelectric property is a consequence of built-in energy barrier at nanowire interfaces rather than the commonly-used doping/de-doping effect. Subsequently, we further employ the Kang-Snyder transport model and quantitively demonstrate that the energy barrier involves energy-dependent carrier scattering (thus a change of total relaxation time) at nanowire heterojunctions, which contributes to the enhanced the Seebeck coefficients and thus power factors. Our work sheds light on the mechanism that can be adopted to design soft but high-performance thermoelectric materials with conducting polymer blends.
- 2 July 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (30) , 34451-34461
Observation of Energy-Dependent Carrier Scattering in Conducting Polymer Nanowire Blends for Enhanced Thermoelectric Performance
Without sacrificing the intrinsic softness and flexibility of conducting polymers, their blends have been demonstrated to be promising to improve thermoelectric properties of conducting polymers. However, the underlying mechanism for the thermoelectric enhancement is hitherto far from clear and is worthy of being explored deeply. In this work, we report novel conducting polymer nanowires blends by physically mixing poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires and polypyrrole (PPy) nanowires. By carefully tuning the energetic structure of PPy nanowires (nanofillers), the Seebeck coefficients and power factors of nanowire blends are surprisingly increased by ~20% and ~32% (compared to PEDOT nanowires), respectively. By means of first-principle calculations and experimental characterizations, we qualitatively confirm that the improved thermoelectric property is a consequence of built-in energy barrier at nanowire interfaces rather than the commonly-used doping/de-doping effect. Subsequently, we further employ the Kang-Snyder transport model and quantitively demonstrate that the energy barrier involves energy-dependent carrier scattering (thus a change of total relaxation time) at nanowire heterojunctions, which contributes to the enhanced the Seebeck coefficients and thus power factors. Our work sheds light on the mechanism that can be adopted to design soft but high-performance thermoelectric materials with conducting polymer blends.
- Open Access
- 25 June 2020
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 1 (5) , 1176-1185
High performance photocatalytic and thermoelectric two-dimensional asymmetrically ordered Janus-like MXene alloys
Novel Janus-like 2D TiMoCO2 MXene alloys with high performance vis-IR water-splitting photocatalytic and thermoelectric capabilities.
- 25 June 2020
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 1 (5) , 1176-1185
Open AccessHigh performance photocatalytic and thermoelectric two-dimensional asymmetrically ordered Janus-like MXene alloys
Novel Janus-like 2D TiMoCO2 MXene alloys with high performance vis-IR water-splitting photocatalytic and thermoelectric capabilities.
- 28 April 2020
- Published by Wiley in Advanced Theory and Simulations
- Vol. 3 (6)
The Role of Electrostatic Interaction between Free Charge Carriers and Counterions in Thermoelectric Power Factor of Conducting Polymers: From Crystalline to Polycrystalline Domains
One of the most burning problems in organic thermoelectrics is the lack of deep understanding on the key limiting factors of thermoelectric efficiency at different length scales for conducting polymers. Here, by examining a prototypical π‐conjugated polymer, poly(3‐hexylthiophene) from molecular level to crystalline and polycrystalline domains, and on the basis of first‐principles calculations, new insights are presented into the thermoelectric transport in conducting polymers, and new material design guidelines are provided. It is proved that in the crystalline domains of conducting polymers, due to the strong electrostatic interactions between free charge carriers and counterions, the power factor within a wide range of doping level is governed by the counterion‐induced electronic scattering. It is corroborated that in the polycrystalline domains, although the short mean free path prevents the holes undergoing grain‐boundary scatterings, the crystallite orientations relative to the conduction path and the grain sizes strongly affect the power factor, leading to the modulation of the power factor by at least two orders of magnitude.
- 28 April 2020
- Published by Wiley in Advanced Theory and Simulations
- Vol. 3 (6)
The Role of Electrostatic Interaction between Free Charge Carriers and Counterions in Thermoelectric Power Factor of Conducting Polymers: From Crystalline to Polycrystalline Domains
One of the most burning problems in organic thermoelectrics is the lack of deep understanding on the key limiting factors of thermoelectric efficiency at different length scales for conducting polymers. Here, by examining a prototypical π‐conjugated polymer, poly(3‐hexylthiophene) from molecular level to crystalline and polycrystalline domains, and on the basis of first‐principles calculations, new insights are presented into the thermoelectric transport in conducting polymers, and new material design guidelines are provided. It is proved that in the crystalline domains of conducting polymers, due to the strong electrostatic interactions between free charge carriers and counterions, the power factor within a wide range of doping level is governed by the counterion‐induced electronic scattering. It is corroborated that in the polycrystalline domains, although the short mean free path prevents the holes undergoing grain‐boundary scatterings, the crystallite orientations relative to the conduction path and the grain sizes strongly affect the power factor, leading to the modulation of the power factor by at least two orders of magnitude.
- Open Access
- 8 April 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-8
Correlating charge and thermoelectric transport to paracrystallinity in conducting polymers
The conceptual understanding of charge transport in conducting polymers is still ambiguous due to a wide range of paracrystallinity (disorder). Here, we advance this understanding by presenting the relationship between transport, electronic density of states and scattering parameter in conducting polymers. We show that the tail of the density of states possesses a Gaussian form confirmed by two-dimensional tight-binding model supported by Density Functional Theory and Molecular Dynamics simulations. Furthermore, by using the Boltzmann Transport Equation, we find that transport can be understood by the scattering parameter and the effective density of states. Our model aligns well with the experimental transport properties of a variety of conducting polymers; the scattering parameter affects electrical conductivity, carrier mobility, and Seebeck coefficient, while the effective density of states only affects the electrical conductivity. We hope our results advance the fundamental understanding of charge transport in conducting polymers to further enhance their performance in electronic applications.
- 8 April 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-8
Open AccessCorrelating charge and thermoelectric transport to paracrystallinity in conducting polymers
The conceptual understanding of charge transport in conducting polymers is still ambiguous due to a wide range of paracrystallinity (disorder). Here, we advance this understanding by presenting the relationship between transport, electronic density of states and scattering parameter in conducting polymers. We show that the tail of the density of states possesses a Gaussian form confirmed by two-dimensional tight-binding model supported by Density Functional Theory and Molecular Dynamics simulations. Furthermore, by using the Boltzmann Transport Equation, we find that transport can be understood by the scattering parameter and the effective density of states. Our model aligns well with the experimental transport properties of a variety of conducting polymers; the scattering parameter affects electrical conductivity, carrier mobility, and Seebeck coefficient, while the effective density of states only affects the electrical conductivity. We hope our results advance the fundamental understanding of charge transport in conducting polymers to further enhance their performance in electronic applications.
- 11 February 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (8) , 4257-4262
Beyond the Mahan–Sofo best thermoelectric strategy: high thermoelectric performance from directional π-conjugation in two-dimensional poly(tetrathienoanthracene)
Mahan and Sofo proved that the best thermoelectric performance could be found in materials with a sharp peak in the density-of-states (DOS) near the chemical potential, which may come from a localized electronic state. However, such a state usually results in a poor electrical conductivity. Therefore, such an idealized model leads to this question: is there a material which naturally possesses a narrow DOS peak near the band edge without a localized state? The answer is yes. From a number of covalent organic frameworks (COFs), we identified poly(tetrathienoanthracene) (PTTA), a purely organic 2D COF possessing such a DOS and subsequently achieves a significant thermoelectric performance with an enhanced Seebeck coefficient such that the peak n- and p-type power factors can reach up to 14.9 and 21.9 μW cm−1 K−2, respectively. This provided a feasible prototype of the Mahan–Sofo model and demonstrated for the first time that a purely organic 2D COF could exhibit high thermoelectric performance for functional applications.
- 11 February 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (8) , 4257-4262
Beyond the Mahan–Sofo best thermoelectric strategy: high thermoelectric performance from directional π-conjugation in two-dimensional poly(tetrathienoanthracene)
Mahan and Sofo proved that the best thermoelectric performance could be found in materials with a sharp peak in the density-of-states (DOS) near the chemical potential, which may come from a localized electronic state. However, such a state usually results in a poor electrical conductivity. Therefore, such an idealized model leads to this question: is there a material which naturally possesses a narrow DOS peak near the band edge without a localized state? The answer is yes. From a number of covalent organic frameworks (COFs), we identified poly(tetrathienoanthracene) (PTTA), a purely organic 2D COF possessing such a DOS and subsequently achieves a significant thermoelectric performance with an enhanced Seebeck coefficient such that the peak n- and p-type power factors can reach up to 14.9 and 21.9 μW cm−1 K−2, respectively. This provided a feasible prototype of the Mahan–Sofo model and demonstrated for the first time that a purely organic 2D COF could exhibit high thermoelectric performance for functional applications.
- 26 July 2019
- Published by Wiley in Advanced Materials
- Vol. 31 (36) , 1901956
Unprecedented Enhancement of Thermoelectric Power Factor Induced by Pressure in Small‐Molecule Organic Semiconductors
Establishing the relationship between pressure and heat–electricity interconversion in van der Waals bonded small‐molecule organic semiconductors is critical not only in designing flexible thermoelectric materials, but also in developing organic electronics. Here, based on first‐principles calculations and using naphthalene as a case study, an unprecedented elevation of p‐type thermoelectric power factor induced by pressure is demonstrated; and the power factor increases by 267% from 159.5 µW m−1 K−2 under ambient conditions to 585.8 µW m−1 K−2 at 2.1 GPa. The underlying mechanism is attributed to the dramatic inhibition of lattice‐vibration‐caused electronic scattering. Furthermore, it is revealed that both restraining low‐frequency intermolecular vibrational modes and increasing intermolecular electronic coupling are two essential factors that effectively suppress the electron–phonon scattering. From the standpoint of molecular design, these two conditions can be achieved by extending the π‐conjugated backbones, introducing long alkyl sidechains to the π‐cores, and substituting heteroatoms in the π‐cores.
- 26 July 2019
- Published by Wiley in Advanced Materials
- Vol. 31 (36) , 1901956
Unprecedented Enhancement of Thermoelectric Power Factor Induced by Pressure in Small‐Molecule Organic Semiconductors
Establishing the relationship between pressure and heat–electricity interconversion in van der Waals bonded small‐molecule organic semiconductors is critical not only in designing flexible thermoelectric materials, but also in developing organic electronics. Here, based on first‐principles calculations and using naphthalene as a case study, an unprecedented elevation of p‐type thermoelectric power factor induced by pressure is demonstrated; and the power factor increases by 267% from 159.5 µW m−1 K−2 under ambient conditions to 585.8 µW m−1 K−2 at 2.1 GPa. The underlying mechanism is attributed to the dramatic inhibition of lattice‐vibration‐caused electronic scattering. Furthermore, it is revealed that both restraining low‐frequency intermolecular vibrational modes and increasing intermolecular electronic coupling are two essential factors that effectively suppress the electron–phonon scattering. From the standpoint of molecular design, these two conditions can be achieved by extending the π‐conjugated backbones, introducing long alkyl sidechains to the π‐cores, and substituting heteroatoms in the π‐cores.