Tianqi Deng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tianqi Deng has a total of 301 co-authors. Here are the top co-authors by number of shared publications:
- Gang Wu
Institute of High Performance Computing
16 shared publications - Shuo-Wang Yang
Institute of High Performance Computing Agency for Science, Technology and Research 1 Fusionopolis Way #16-16 138632 Connexis Singapore
14 shared publications - Deren Yang
State Key Laboratory of Silicon and Advanced Semiconductor Materials and School of Materials Science and Engineering, Zhejiang University 1 , Hangzhou 310027
13 shared publications - Xiaodong Pi
Zhejiang University
11 shared publications Deren Yang
State Key Laboratory of Silicon and Advanced Semiconductor Materials & School of Materials Science and Engineering Zhejiang University Hangzhou Zhejiang China
10 shared publications- Wen Shi
Institute of High Performance Computing Agency for Science, Technology and Research 1 Fusionopolis Way, #16‐16 Connexis Singapore 138632 Republic of Singapore
9 shared publications
Latest Publications
- 18 October 2026
- Published by Wiley in Advanced Energy Materials
Ligand Electronics and Metal‐Site Acidity Enable High‐Voltage MOF Electrolytes for Quasi‐Solid‐State Lithium‐Metal Batteries
Lithium‐metal batteries (LMBs) coupled with Ni‐rich cathodes offer high energy density for next‐generation energy storage. Their practical implementation, however, is limited by electrolyte oxidation and interfacial degradation under high voltage. Metal‐organic frameworks (MOFs) would regulate ion solvation and stabilize electrode‐electrolyte interfaces in quasi‐solid‐state electrolytes, yet the molecular origins of their oxidation stability remain unclear. Here, we identify ligand electronics and metal‐site acidity as key descriptors for high‐voltage‐stable MOF electrolytes. Electron‐withdrawing ligands lower the HOMO energy levels of MOFs, while hard Lewis‐acidic Al sites further enhance oxidation resistance. Guided by this principle, we design a perfluorinated Al‐based MOF, Al‐FBDC, featuring a high oxidation onset potential of 4.82 V (vs. Li + /Li). Incorporating Al‐FBDC into a composite cathode reconstructs the local electrolyte environment at particle‐level interfaces, thereby suppressing parasitic reactions and cathode degradation under high‐voltage operation. As a result, Li||Al‐FBDC@NCM quasi‐solid‐state cells deliver excellent long‐term cycling stability and rate performance, retaining 82% of the capacity after 200 cycles at 1 C over 3.0‐4.5 V, while maintaining robust performance even at 4.6 and 4.8 V cut‐off voltages and with controlled electrolyte loading. This work identifies a general design principle for high‐voltage‐stable MOF electrolytes and offers a practical route toward high‐energy‐density LMBs.
- 18 October 2026
- Published by Wiley in Advanced Energy Materials
Ligand Electronics and Metal‐Site Acidity Enable High‐Voltage MOF Electrolytes for Quasi‐Solid‐State Lithium‐Metal Batteries
Lithium‐metal batteries (LMBs) coupled with Ni‐rich cathodes offer high energy density for next‐generation energy storage. Their practical implementation, however, is limited by electrolyte oxidation and interfacial degradation under high voltage. Metal‐organic frameworks (MOFs) would regulate ion solvation and stabilize electrode‐electrolyte interfaces in quasi‐solid‐state electrolytes, yet the molecular origins of their oxidation stability remain unclear. Here, we identify ligand electronics and metal‐site acidity as key descriptors for high‐voltage‐stable MOF electrolytes. Electron‐withdrawing ligands lower the HOMO energy levels of MOFs, while hard Lewis‐acidic Al sites further enhance oxidation resistance. Guided by this principle, we design a perfluorinated Al‐based MOF, Al‐FBDC, featuring a high oxidation onset potential of 4.82 V (vs. Li + /Li). Incorporating Al‐FBDC into a composite cathode reconstructs the local electrolyte environment at particle‐level interfaces, thereby suppressing parasitic reactions and cathode degradation under high‐voltage operation. As a result, Li||Al‐FBDC@NCM quasi‐solid‐state cells deliver excellent long‐term cycling stability and rate performance, retaining 82% of the capacity after 200 cycles at 1 C over 3.0‐4.5 V, while maintaining robust performance even at 4.6 and 4.8 V cut‐off voltages and with controlled electrolyte loading. This work identifies a general design principle for high‐voltage‐stable MOF electrolytes and offers a practical route toward high‐energy‐density LMBs.
- Open Access
- 17 September 2026
- Published by Elsevier in Review of Materials Research
- Vol. 2 (10)
Synthesis and thermoelectric properties of rare-earth-based half-Heusler compounds with large enthalpy of formation
- 17 September 2026
- Published by Elsevier in Review of Materials Research
- Vol. 2 (10)
Open AccessSynthesis and thermoelectric properties of rare-earth-based half-Heusler compounds with large enthalpy of formation
- 1 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (9)
First-principles insight into electrical characteristics of rhodium in vertical Bridgman-grown β-Ga2O3 with experimental validation
The vertical Bridgman (VB) method is a promising approach for growing high-quality, large-sized β-Ga2O3 single crystals. However, rhodium (Rh) from the Pt–Rh alloy crucible can diffuse substantially into the melt during crystal growth, leading to unintentional doping of the crystal. Herein, first-principles calculations were performed to investigate the incorporation behavior and electronic effects of Rh impurities in β-Ga2O3. It was revealed that Rh preferentially occupies the octahedral Ga sites, exerting minimal influence on n-type or semi-insulating β-Ga2O3 but acting as a deep-level donor that may inhibit p-type conductivity. Experimental growth of both Fe- and Sn-doped 4-in. β-Ga2O3 crystals by the VB method yielded electrical conductivities comparable to crystals grown by other approaches, thereby validating the predicted electrical properties of Rh. Our study elucidates the electrical characteristics of Rh in β-Ga2O3 theoretically and experimentally, providing guidance for optimizing VB growth processes and advancing the fabrication of high-performance β-Ga2O3-based electronic devices.
- 1 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (9)
First-principles insight into electrical characteristics of rhodium in vertical Bridgman-grown β-Ga2O3 with experimental validation
The vertical Bridgman (VB) method is a promising approach for growing high-quality, large-sized β-Ga2O3 single crystals. However, rhodium (Rh) from the Pt–Rh alloy crucible can diffuse substantially into the melt during crystal growth, leading to unintentional doping of the crystal. Herein, first-principles calculations were performed to investigate the incorporation behavior and electronic effects of Rh impurities in β-Ga2O3. It was revealed that Rh preferentially occupies the octahedral Ga sites, exerting minimal influence on n-type or semi-insulating β-Ga2O3 but acting as a deep-level donor that may inhibit p-type conductivity. Experimental growth of both Fe- and Sn-doped 4-in. β-Ga2O3 crystals by the VB method yielded electrical conductivities comparable to crystals grown by other approaches, thereby validating the predicted electrical properties of Rh. Our study elucidates the electrical characteristics of Rh in β-Ga2O3 theoretically and experimentally, providing guidance for optimizing VB growth processes and advancing the fabrication of high-performance β-Ga2O3-based electronic devices.
- Open Access
- 9 June 2026
- Published by Wiley in Advanced Science
- Vol. 13 (48) , e76000
Colossal Photovoltaic Current in Ferroelectric Oxide by Constructing Defect Band
Anomalous photovoltaic effect in ferroelectric materials has been intensively investigated in the past decades. However, an intrinsic current density in these materials remains very low at µA/cm 2 level, hindering their device applications. Here, we report a colossal photovoltaic current density up to 34.36 mA/cm 2 in PbTiO 3 films with a Pb‐deficient layer under 375 nm light irradiation. The ultraviolet photoresponsivity at zero bias is 20 times higher than that of the emerged ferroelectric materials. A junction effect between the deficient and non‐defective layers in the film is proposed to produce the remarkable photovoltaic current density, while the photovoltage can be maintained by the anomalous photovoltaic effect. Notably, it was discovered that Pb vacancies introduce a defect band within the bandgap, enabling a direct transition from the valence band to the defect band. This transition accounts for a high‐efficient absorption and the prolonged carrier lifetime, thereby contributing to the superior photovoltaic performance. These findings suggest a new route to explore optoelectronic devices of ferroelectrics by the defect design.
- 9 June 2026
- Published by Wiley in Advanced Science
- Vol. 13 (48) , e76000
Open AccessColossal Photovoltaic Current in Ferroelectric Oxide by Constructing Defect Band
Anomalous photovoltaic effect in ferroelectric materials has been intensively investigated in the past decades. However, an intrinsic current density in these materials remains very low at µA/cm 2 level, hindering their device applications. Here, we report a colossal photovoltaic current density up to 34.36 mA/cm 2 in PbTiO 3 films with a Pb‐deficient layer under 375 nm light irradiation. The ultraviolet photoresponsivity at zero bias is 20 times higher than that of the emerged ferroelectric materials. A junction effect between the deficient and non‐defective layers in the film is proposed to produce the remarkable photovoltaic current density, while the photovoltage can be maintained by the anomalous photovoltaic effect. Notably, it was discovered that Pb vacancies introduce a defect band within the bandgap, enabling a direct transition from the valence band to the defect band. This transition accounts for a high‐efficient absorption and the prolonged carrier lifetime, thereby contributing to the superior photovoltaic performance. These findings suggest a new route to explore optoelectronic devices of ferroelectrics by the defect design.
- 11 May 2026
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 20 (5) , e70186
Electron Transport and Dislocations in Heavily Doped and Co‐Doped n‐Type 4H‐SiC
With the increasing demand for low‐resistivity substrates, growing heavily doped 4H‐SiC crystals is emerging as a critical practice. Now, we report the growth of heavily nitrogen‐doped, nitrogen‐aluminum (N–Al) co‐doped and nitrogen‐gallium (N–Ga) co‐doped 4H‐SiC crystals by using the physical vapor transport (PVT) method. Comparative study shows that co‐doping contributes to enhanced nitrogen incorporation efficiency and leads to lower resistivity. In addition, it is found that the heavy doping shifts the Fermi level of 4H‐SiC into the conduction band. The temperature dependence of the mobility of heavily co‐doped 4H‐SiC indicates a thermally activated transport for electrons at temperatures above 300 K. Ga and Al atoms are found to effectively impede the glide and multiplication of basal plane dislocations (BPDs), reducing the density of BPDs. The N–Ga co‐doping effectively suppresses the formation of stacking faults.
- 11 May 2026
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 20 (5) , e70186
Electron Transport and Dislocations in Heavily Doped and Co‐Doped n‐Type 4H‐SiC
With the increasing demand for low‐resistivity substrates, growing heavily doped 4H‐SiC crystals is emerging as a critical practice. Now, we report the growth of heavily nitrogen‐doped, nitrogen‐aluminum (N–Al) co‐doped and nitrogen‐gallium (N–Ga) co‐doped 4H‐SiC crystals by using the physical vapor transport (PVT) method. Comparative study shows that co‐doping contributes to enhanced nitrogen incorporation efficiency and leads to lower resistivity. In addition, it is found that the heavy doping shifts the Fermi level of 4H‐SiC into the conduction band. The temperature dependence of the mobility of heavily co‐doped 4H‐SiC indicates a thermally activated transport for electrons at temperatures above 300 K. Ga and Al atoms are found to effectively impede the glide and multiplication of basal plane dislocations (BPDs), reducing the density of BPDs. The N–Ga co‐doping effectively suppresses the formation of stacking faults.
- Open Access
- 20 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Polymer-templated mesoscale assembly directs synthesis of centimetre-scale perovskite single crystals
The synthesis of high-quality single crystals is essential for revealing intrinsic structure-property relationships, as they provide an ideal model system free from grain boundaries and other extrinsic defects, enabling precise studies of electronic, optical, and charge-transport properties. In metal halide perovskites, an emerging family of semiconductors that have rapidly become a focal point of optoelectronic materials research, single crystal studies provide direct access to intrinsic processes such as defect formation, ion migration, and interfacial behavior. However, producing large, high-quality perovskite single crystals remains challenging because their multicomponent precursor solutions sustain dynamic solvation and coordination equilibria. The coexistence of fast ion dynamics and unstable coordination often drives uncontrolled multi-nucleation and disordered aggregation, making the nucleation stage a critical determinant of final crystal quality. Here, we introduce a general nucleation-control framework that regulates transient precursor species into mesoscale clusters via reversible, non-covalent interactions. Such weak and dynamic interactions provide soft confinement at the pre-nucleation stage, suppress random aggregation, promote selective nucleation, and permit ordered lattice formation without permanent additive incorporation. Implemented through a polymer-templated strategy, the approach enables the formation of centimetre-scale perovskite single crystals within hours and is broadly applicable across various perovskite compositions, demonstrating its universality.
- 20 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessPolymer-templated mesoscale assembly directs synthesis of centimetre-scale perovskite single crystals
The synthesis of high-quality single crystals is essential for revealing intrinsic structure-property relationships, as they provide an ideal model system free from grain boundaries and other extrinsic defects, enabling precise studies of electronic, optical, and charge-transport properties. In metal halide perovskites, an emerging family of semiconductors that have rapidly become a focal point of optoelectronic materials research, single crystal studies provide direct access to intrinsic processes such as defect formation, ion migration, and interfacial behavior. However, producing large, high-quality perovskite single crystals remains challenging because their multicomponent precursor solutions sustain dynamic solvation and coordination equilibria. The coexistence of fast ion dynamics and unstable coordination often drives uncontrolled multi-nucleation and disordered aggregation, making the nucleation stage a critical determinant of final crystal quality. Here, we introduce a general nucleation-control framework that regulates transient precursor species into mesoscale clusters via reversible, non-covalent interactions. Such weak and dynamic interactions provide soft confinement at the pre-nucleation stage, suppress random aggregation, promote selective nucleation, and permit ordered lattice formation without permanent additive incorporation. Implemented through a polymer-templated strategy, the approach enables the formation of centimetre-scale perovskite single crystals within hours and is broadly applicable across various perovskite compositions, demonstrating its universality.
- 17 April 2026
- Published by Springer Nature in Nature Physics
- Vol. 22 (6) , 884-890
Symmetry-guided catalogue of chiral phonon materials
- 17 April 2026
- Published by Springer Nature in Nature Physics
- Vol. 22 (6) , 884-890
Symmetry-guided catalogue of chiral phonon materials
- Open Access
- 6 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Solution epitaxy of single-crystal ferroelectric p-i-n structure with ultrahigh photovoltaic response
Ferroelectric materials with a switchable polarization are appealing for optoelectronic applications because of their above-bandgap photovoltage with a potential to exceed the Shockley-Queisser limit efficiency within classic p-n junctions. However, the intrinsic photovoltaic current in ferroelectrics remains far below the junction ones by orders, hindering their practical applications. Here we report an extremely large photovoltaic current density of 130 mA cm−2 with a photovoltage of 1.31 V under 375 nm light illumination in single-domain lead titanate films. Its photoresponsivity surpasses all available ferroelectric materials by two orders of magnitude. Systematic investigations reveal that an interfacial Ta dopant layer during solution epitaxy drives a polarization converting of the film via the flexoelectric effect, where surface charged Pb vacancy layer was generated for polarization screening. These two layers produce a p-i-n structure throughout the film, accounting for the ultrahigh photovoltaic response. Furthermore, a self-powered X-ray detector made of such film was explored to achieve a sensitivity of 4.73 C Gyair−1 cm−3, three orders of magnitude higher than that of commercial amorphous Se detectors. Our findings may pave the way for exploring novel detection and imaging devices based on ferroelectric materials.
- 6 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessSolution epitaxy of single-crystal ferroelectric p-i-n structure with ultrahigh photovoltaic response
Ferroelectric materials with a switchable polarization are appealing for optoelectronic applications because of their above-bandgap photovoltage with a potential to exceed the Shockley-Queisser limit efficiency within classic p-n junctions. However, the intrinsic photovoltaic current in ferroelectrics remains far below the junction ones by orders, hindering their practical applications. Here we report an extremely large photovoltaic current density of 130 mA cm−2 with a photovoltage of 1.31 V under 375 nm light illumination in single-domain lead titanate films. Its photoresponsivity surpasses all available ferroelectric materials by two orders of magnitude. Systematic investigations reveal that an interfacial Ta dopant layer during solution epitaxy drives a polarization converting of the film via the flexoelectric effect, where surface charged Pb vacancy layer was generated for polarization screening. These two layers produce a p-i-n structure throughout the film, accounting for the ultrahigh photovoltaic response. Furthermore, a self-powered X-ray detector made of such film was explored to achieve a sensitivity of 4.73 C Gyair−1 cm−3, three orders of magnitude higher than that of commercial amorphous Se detectors. Our findings may pave the way for exploring novel detection and imaging devices based on ferroelectric materials.
- 3 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (14) , 15320-15329
Zigzag Perovskitoids with Superior Stability and Thermal Conductivity
Two-dimensional (2D) layered hybrid perovskites constitute an emerging class of semiconductors with tunable structures and desirable properties, primarily governed by the inorganic sublattice. Octahedral tilting and distortions of the inorganic skeleton, as well as interlayer sliding and stacking, give rise to broken symmetries and are modulated by the organic spacers. The inorganic layers sandwiched between two organic layers typically maintain a planar geometry, but the corrugation of the inorganic slab itself in the out-of-plane direction remains largely unexplored. Here, we report a family of zigzag perovskitoids that exhibit common features in their single-crystal structures along with temperature-dependent lattice behavior. These zigzag perovskitoids exhibit markedly superior stability and thermal conductivity compared with 2D-planar perovskites AnPbI4 due to altered soft modes and vibrational behaviors modulated by distinct Pb–I motifs. Their unique optoelectronic properties, governed by the zigzag inorganic sublattice, also suggest promising applications. These findings provide insights into the control of stability, thermal transport, and optoelectronic properties in layered hybrid materials and open up possibilities for low-dimensional perovskite-based thermal management applications.
- 3 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (14) , 15320-15329
Zigzag Perovskitoids with Superior Stability and Thermal Conductivity
Two-dimensional (2D) layered hybrid perovskites constitute an emerging class of semiconductors with tunable structures and desirable properties, primarily governed by the inorganic sublattice. Octahedral tilting and distortions of the inorganic skeleton, as well as interlayer sliding and stacking, give rise to broken symmetries and are modulated by the organic spacers. The inorganic layers sandwiched between two organic layers typically maintain a planar geometry, but the corrugation of the inorganic slab itself in the out-of-plane direction remains largely unexplored. Here, we report a family of zigzag perovskitoids that exhibit common features in their single-crystal structures along with temperature-dependent lattice behavior. These zigzag perovskitoids exhibit markedly superior stability and thermal conductivity compared with 2D-planar perovskites AnPbI4 due to altered soft modes and vibrational behaviors modulated by distinct Pb–I motifs. Their unique optoelectronic properties, governed by the zigzag inorganic sublattice, also suggest promising applications. These findings provide insights into the control of stability, thermal transport, and optoelectronic properties in layered hybrid materials and open up possibilities for low-dimensional perovskite-based thermal management applications.
- 27 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (7) , 4394-4403
Defect-Calculation-Guided Performance Optimization of n-Type LuNiSb Half-Heusler Thermoelectrics
- 27 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (7) , 4394-4403
Defect-Calculation-Guided Performance Optimization of n-Type LuNiSb Half-Heusler Thermoelectrics