Elena Palomo del Barrio has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Improved Thermophysical and Mechanical Properties in LiNaSO4 Composites for Thermal Energy Storage

    by Maria Taeño, Ariba Adnan, Cristina Luengo, Ángel Serrano, Jean-Luc Dauvergne, Paola Crocomo, Ali Huerta, Stefania Doppiu, Elena Palomo del Barrio

    Solid-solid phase-change materials have great potential for developing compact and low-cost thermal storage systems. The solid-state nature of these materials enables the design of systems analogous to those based on natural rocks but with an extraordinarily higher energy density. In this scenario, the evaluation and improvement of the mechanical and thermophysical properties of these solid-solid PCMs are key to exploiting their full potential. In this study, LiNaSO4-based composites, comprising porous MgO and expanded graphite (EG) as the dispersed phases and LiNaSO4 as the matrix, have been prepared with the aim of enhancing the thermophysical and mechanical properties of LiNaSO4. The characteristic structure of MgO and the high degree of crystallinity of the EG600 confer on the LiNaSO4 sample mechanical stability, which leads to an increase in the Young’s modulus (almost three times higher) compared to the pure LiNaSO4 sample. These materials are proposed as a suitable candidate for thermal energy storage applications at high temperatures (400–550 °C). The addition of 5 wt.% of MgO or 5% of EG had a minor influence on the solid-solid phase change temperature and enthalpy; however, other thermal properties such as thermal conductivity or specific heat capacity were increased, extending the scope of PCMs use.


  • Open Access

    NPG–TRIS Thermal Storage System. Quantification of the Limiting Processes: Sublimation and Water’s Adsorption

    by Noelia De La Pinta, Sergio Santos-Moreno, Stephania Doppiu, Josu M. Igartua, Elena Palomo del Barrio, Gabriel A. López

    The NPG–TRIS binary system (NPG = (CH3)2C(CH2OH)2 = 2,2-dimetyl-1,3-propanodiol; TRIS = NH2C(CH2OH)3 = 2-Amino-2-(hydroxymethyl)-1,3-propanediol) was intensively investigated as a thermal energy storage system, due to the reversibility of its phase transitions and their associated energy. An adapted methodology was applied to precisely quantify its sublimation tendency. Relevant thermochemical data were revisited and evaluated using some specific experimental procedures. We also determined that the widely accepted requirement of working in an inert atmosphere to avoid deviations due to hygroscopicity is not necessary. Nevertheless, to take advantage of the energetic properties of the NPG–TRIS system, closed containers will be required to avoid NPG losses, due to its quantitatively determined high sublimation tendency.


  • Open Access

    Experimental Investigations on Electric-Field-Induced Crystallization in Erythritol

    by Jean-Luc Dauvergne, Artem Nikulin, Stefania Doppiu, Elena Palomo del Barrio

    The objective of this experimental study was to develop a method to induce crystallization of sugar alcohols using an electric field for its future implementation in latent heat thermal energy storage systems. To better understand the mechanisms behind this approach, the first step of this work was dedicated to the replication, continuation, and consolidation of promising results on erythritol reported by another research group. In the second step, a second experimental configuration, previously used to electrically control the supercooling of other phase change materials, was tested with the same sugar alcohol. For both configurations, the influence of the type of current (DC and AC at different frequencies), its amplitude, and time of exposure were studied. However, none of these tests allowed influencing the crystallization of erythritol. Even if surprising at first glance, the difficulty in reproducing experiments and interpreting the results is not new in the field of electric-field-induced crystallization, as shown in particular by the abundant literature reviews concerning water. Currently, to the best of our knowledge, we consider that electric fields could be an attractive option to initiate and accelerate the crystallization of erythritol, but this solution must be considered with caution.


  • Open Access

    Characterization of Fatty Acids as Biobased Organic Materials for Latent Heat Storage

    by Marie Duquesne, Clément Mailhé, Stefania Doppiu, Jean-Luc Dauvergne, Sergio Santos-Moreno, Alexandre Godin, Guillaume Fleury, Fabien Rouault, Elena Palomo del Barrio

    This work aims to characterize phase change materials (PCM) for thermal energy storage in buildings (thermal comfort). Fatty acids, biobased organic PCM, are attractive candidates for integration into active or passive storage systems for targeted application. Three pure fatty acids (capric, myristic and palmitic acids) and two eutectic mixtures (capric-myristic and capric-palmitic acids) are studied in this paper. Although the main storage properties of pure fatty acids have already been investigated and reported in the literature, the information available on the eutectic mixtures is very limited (only melting temperature and enthalpy). This paper presents a complete experimental characterization of these pure and mixed fatty acids, including measurements of their main thermophysical properties (melting temperature and enthalpy, specific heats and densities in solid and liquid states, thermal conductivity, thermal diffusivity as well as viscosity) and the properties of interest regarding the system integrating the PCM (energy density, volume expansion). The storage performances of the studied mixtures are also compared to those of most commonly used PCM (salt hydrates and paraffins).


  • Open Access

    On the Use of Infrared Thermography for the Estimation of Melting Enthalpy

    by Clément Mailhé, Marie Duquesne, Elena Palomo del Barrio, Alexandre Godin

    A calorimetry method based on infrared thermography is showing promise for material screening, allowing the simultaneous detection of phase transitions of multiple samples at a time, hence enabling the establishment of phase diagrams in a record time. The working principle of this method is similar to the one of Differential Thermal Analysis. Therefore, this work aims at identifying if the melting enthalpy of materials could be estimated on the same basis using infrared thermography. In this work, the melting of six eutectic mixtures of fatty acids is estimated under three considerations. The results are compared to Differential Scanning Calorimetry measurements and literature data. The accuracy of the method is discussed and improvements are proposed.


  • Open Access

    Li4(OH)3Br-Based Shape Stabilized Composites for High-Temperature TES Applications: Selection of the Most Convenient Supporting Material

    by Imane Mahroug, Stefania Doppiu, Jean-Luc Dauvergne, Angel Serrano, Elena Palomo del Barrio

    Peritectic compound Li4(OH)3Br has been recently proposed as phase change material (PCM) for thermal energy storage (TES) applications at approx. 300 °C Compared to competitor PCM materials (e.g., sodium nitrate), the main assets of this compound are high volumetric latent heat storage capacity (>140 kWh/m3) and very low volume changes (4(OH)3Br during the formation of the melt and after its complete melting, avoiding any leakage and thus obtaining a composite apparently always in the solid state during the charge and discharge of the TES material. Micro-nanoparticles of MgO, Fe2O3, CuO, SiO2 and Al2O3 have been considered as candidate supporting materials combined with the cold-compression route for shape-stabilized composites preparation. The work carried out allowed for the identification of the most promising composite based on MgO nanoparticles through a deep experimental analysis and characterization, including chemical compatibility tests, anti-leakage performance evaluation, structural and thermodynamic properties analysis and preliminary cycling stability study.


  • Open Access

    Study of the Phase Transitions in the Binary System NPG-TRIS for Thermal Energy Storage Applications

    by Sergio Santos-Moreno, Stefania Doppiu, Gabriel A. Lopez, Nevena Marinova, Ángel Serrano, Elena Silveira, Elena Palomo del Barrio

    Neopentylglycol (NPG) and tris(hydroxymethyl)aminomethane (TRIS) are promising phase change materials (PCMs) for thermal energy storage (TES) applications. These molecules undergo reversible solid-solid phase transitions that are characterized by high enthalpy changes. This work investigates the NPG-TRIS binary system as a way to extend the use of both compounds in TES, looking for mixtures that cover transition temperatures different from those of pure compounds. The phase diagram of NPG-TRIS system has been established by thermal analysis. It reveals the existence of two eutectoids and one peritectic invariants, whose main properties as PCMs (transition temperature, enthalpy of phase transition, specific heat and density) have been determined. Of all transitions, only the eutectoid at 392 K shows sufficiently high enthalpy of solid-solid phase transition (150–227 J/g) and transition temperature significantly different from that of the solid-state transitions of pure compounds (NPG: 313 K; TRIS: 407 K). Special attention has also been paid to the analysis of metastability issues that could limit the usability of NPG, TRIS and their mixtures as PCMs. It is proven that the addition of small amounts of expanded graphite microparticles contributes to reduce the subcooling phenomena that characterizes NPG and TRIS and solve the reversibility problems observed in NPG/TRIS mixtures.


  • Open Access

    The Li2SO4–Na2SO4 System for Thermal Energy Storage

    by Stefania Doppiu, Jean-Luc Dauvergne, Angel Serrano, Elena Palomo del Barrio

    In this paper, the system Li2SO4–Na2SO4 is proposed as a candidate material for thermal energy storage applications at high temperatures (450–550 °C). Depending on the composition, the thermal energy can be stored by using a eutectoid reaction and solid–solid phase transition. In these types of systems, all the components (reagent and products) are in the solid state. This work includes the theoretical analysis (based on the Calphad method) of the system selected obtaining all the theoretical parameters (for example, enthalpies of reaction, transition temperatures, volume expansion, and the heat capacities) necessary to determine the theoretical performance in terms of thermal energy storage. The theoretical analysis allowed to identify two compositions (Li2SO4/Na2SO4 79/21 and 50/50) in the phase diagram with the most promising theoretical enthalpy of transformation (270 J/g and 318 J/g, respectively) corresponding to a eutectoid reaction and a solid–solid phase transition (stoichiometric compound LiNaSO4). The experimental analysis carried out allowed to confirm the great potential of this system for TES application even if some discrepancies with the theoretical calculation have been observed experimentally (energy densities lower than expected). For the two compositions studied, 79/21 and 50/50, the enthalpies of reaction are 185 J/g and 160 J/g, respectively. The reactivity of the system was tested under different experimental conditions preparing materials with a different degree of nanocrystallization to favor the diffusion in the solid state, testing the reactivity of the materials under controlled atmosphere and under air, and performing preliminary durability analysis (cycling behavior up to 20 cycles) to test the stability and reversibility.


  • Open Access

    Neopentyl Glycol as Active Supporting Media in Shape-Stabilized PCMs

    by Angel Serrano, Jean-Luc Dauvergne, Stefania Doppiu, Elena Palomo Del Barrio

    The present work explores the feasibility of using polyalcohols with solid-solid phase transition as active supporting matrix of n-alkanes in shape-stabilized phase change materials (SSPCMs). It is well-established that the use of SSPCM avoids leakage and increases stability and easy handling of solid-liquid PCMs. Nevertheless, the resulting composite exhibits a loss of heat storage capacity due to the volume occupied by the supporting material, which does not contribute to latent heat storage. Therefore, the objective of this work is to combine solid-liquid PCMs (alkanes) with solid-solid PCMs (polyalcohols), both exhibiting a phase transition in the same range of temperature, to obtain high energy density SSPCMs. Towards that goal, the performance of Neopentyl Glycol (NPG) and Docosane as a new energetic SSPCM has been proved. The NPG-Docosane chemical compatibility and its outstanding wettability facilitate the propitious association of both materials. The higher capillary forces obtained by decreasing the NPG crystal size together with the addition of expanded graphite (EG) allowed to obtain a maximum Docosane content of 60 wt%. The addition of EG improves the shape stability at the time that increases the heat transfer properties of the composites. The analysis showed that the components of the obtained SSPCMs are able to combine their latent heats, achieving a maximum value of 210.74 J/g for the highest Docosane content. This value is much higher than those latent heats exhibited by existing SSPCMs in the same working temperature range.


  • Open Access

    Phase Diagrams of Fatty Acids as Biosourced Phase Change Materials for Thermal Energy Storage

    by Clément Mailhé, Marie Duquesne, Elena Palomo del Barrio, Mejdi Azaiez, Fouzia Achchaq

    Thermal energy storage is known as a key element to optimize the use of renewable energies and to improve building performances. Phase change materials (PCMs) derived from wastes or by-products of plant or animal oil origins are low-cost biosourced PCMs and are composed of more than 75% of fatty acids. They present paraffin-like storage properties and melting temperatures ranging from −23 °C to 78 °C. Therefore, they could be appropriate for latent heat storage technologies for building applications. Although already studied, a more detailed exploration of this class of PCMs is still required. In this frame, a screening of fatty acids and of their related binary systems must be performed. The infrared thermography method (IRT), already used for the fast estimation of simple phase diagrams (~2 h), appears to be best suited to achieve this goal. IRT method applicability to the more complex fatty acids phase diagrams is hence studied in this work. A phase diagram comprising more than a hundred data sets was obtained for the palmitic acid–stearic acid binary system. The reliability of the results is assessed by comparison to differential scanning calorimetry (DSC) measurements or results from other standard methods presented in literature and to a solid–liquid equilibrium thermodynamic model.