Dhrubajyoti Sen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dhrubajyoti Sen has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Soumendra Nath Kuiry
Department of Civil Engineering Indian Institute of Technology Madras Chennai India
7 shared publications - Pankaj Singh
Indian Institute of Technology Kharagpur
4 shared publications - Tirtha Roy-Biswas
Indian Institute of Technology
3 shared publications - Daisy Koch
School of Water Resources, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
2 shared publications - Sazeda Begam
University of Nottingham
2 shared publications - Subhasish Dey
Indian Institute of Technology Gandhinagar
2 shared publications
Latest Publications
- 1 August 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 152 (4) , 04026015
Enhancing Discharge Efficiency of Short-Crested Weir Sluices with a Gate–Lip Appurtenance
Short-crested trapezoidal-sectioned weirs fitted with vertical lift gates are extensively used as river diversion structures in the Indian subcontinent. While the downstream slopes of the w...
- 1 August 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 152 (4) , 04026015
Enhancing Discharge Efficiency of Short-Crested Weir Sluices with a Gate–Lip Appurtenance
Short-crested trapezoidal-sectioned weirs fitted with vertical lift gates are extensively used as river diversion structures in the Indian subcontinent. While the downstream slopes of the w...
- 1 September 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 151 (5)
Discharge Characteristics of Semicylindrical-Edged Vertical Sluice Gates
- 1 September 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 151 (5)
Discharge Characteristics of Semicylindrical-Edged Vertical Sluice Gates
- 6 February 2025
- Published by Elsevier in Science of The Total Environment
- Vol. 966, 178681
A multi-method approach to assess long-term urbanization impacts on an ecologically sensitive urban wetland in Northeast India
- 6 February 2025
- Published by Elsevier in Science of The Total Environment
- Vol. 966, 178681
A multi-method approach to assess long-term urbanization impacts on an ecologically sensitive urban wetland in Northeast India
- 24 December 2024
- Published by Springer Nature
- p. 319-330
Combined Storm Surge and River Flow Simulation for the Hooghly Estuary Along the East Coast of India
- 24 December 2024
- Published by Springer Nature
- p. 319-330
Combined Storm Surge and River Flow Simulation for the Hooghly Estuary Along the East Coast of India
- 22 August 2023
- Published by Elsevier in Ecohydrology & Hydrobiology
- Vol. 24 (3) , 633-658
A review on hydrobiogeochemical modelling in freshwater wetlands: Insights into model characteristics and applicability
- 22 August 2023
- Published by Elsevier in Ecohydrology & Hydrobiology
- Vol. 24 (3) , 633-658
A review on hydrobiogeochemical modelling in freshwater wetlands: Insights into model characteristics and applicability
- 1 August 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 149 (8)
Flow-Through Short-Crested Trapezoidal Weirs: Effect of Downstream Slope
- 1 August 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 149 (8)
Flow-Through Short-Crested Trapezoidal Weirs: Effect of Downstream Slope
- 1 January 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 149 (1) , 05022005
Tidal Bore Dynamics of a Mixed Estuary: The Hooghly River, India
The study establishes, with the aid of field measurements and numerical modeling, that the upper reach of the Hooghly estuary (India), though damped, registers an intense tidal bore. The lower estuary is amplified but does not show signs of bore formation. Limited quantitative studies are available on bores forming in damped estuaries. This study attempts to fill this gap using tidal gauge and velocity observations supplemented with simulation results obtained using the open-source numerical shallow-water solver TELEMAC 2D. New estimates of bore intensity in the Hooghly are presented confirming that the bore Froude number may reach 1.37 in the upper estuary for higher tidal ranges. The numerical model is used to gain further insights into the formation and evolution of the Hooghly bore. The model, despite using a vertically averaged velocity field, simulates tidal wave propagation and estimates of velocity magnitude during bore propagation with significant accuracy. The study demonstrates that the proposed model is an efficient and inexpensive tool for capturing the bore phenomenon and may be used to supplement field observations. Using the simulation results, key features of the Hooghly bore, such as the distance of the bore inception from the ocean mouth and the threshold tidal range for bore formation are investigated. The numerical simulations highlight the impact of riverbed asymmetry in bore appearances in natural estuaries. The analysis also reveals new information about bores in the Hooghly estuary, which may be useful for planning shipping and berthing operations in the port terminals along the river. A comparison with other estuaries witnessing tidal bores indicates that the Hooghly experiences a strong bore, despite the high dissipative forces owing to the rapid convergence of river width.
- 1 January 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 149 (1) , 05022005
Tidal Bore Dynamics of a Mixed Estuary: The Hooghly River, India
The study establishes, with the aid of field measurements and numerical modeling, that the upper reach of the Hooghly estuary (India), though damped, registers an intense tidal bore. The lower estuary is amplified but does not show signs of bore formation. Limited quantitative studies are available on bores forming in damped estuaries. This study attempts to fill this gap using tidal gauge and velocity observations supplemented with simulation results obtained using the open-source numerical shallow-water solver TELEMAC 2D. New estimates of bore intensity in the Hooghly are presented confirming that the bore Froude number may reach 1.37 in the upper estuary for higher tidal ranges. The numerical model is used to gain further insights into the formation and evolution of the Hooghly bore. The model, despite using a vertically averaged velocity field, simulates tidal wave propagation and estimates of velocity magnitude during bore propagation with significant accuracy. The study demonstrates that the proposed model is an efficient and inexpensive tool for capturing the bore phenomenon and may be used to supplement field observations. Using the simulation results, key features of the Hooghly bore, such as the distance of the bore inception from the ocean mouth and the threshold tidal range for bore formation are investigated. The numerical simulations highlight the impact of riverbed asymmetry in bore appearances in natural estuaries. The analysis also reveals new information about bores in the Hooghly estuary, which may be useful for planning shipping and berthing operations in the port terminals along the river. A comparison with other estuaries witnessing tidal bores indicates that the Hooghly experiences a strong bore, despite the high dissipative forces owing to the rapid convergence of river width.
- 1 December 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 147 (12) , 04021058
Submerged Flow over Barrage Weirs: A Computational Fluid Dynamics Model Study
Barrage weirs, which are trapezoidal-sectioned sharp-crested weirs having finite crest length, are primarily used in the Indian subcontinent for diverting water for irrigation. This study presents an investigative study on submerged flows over barrage weirs, as occurs during floods, and establishes correlations for determining the structure’s coefficient of discharge using a two-dimensional (2D) Reynolds averaged Navier Stokes-volume of fluid (RANS-VOF) model, coupled with the renormalization group (RNG) equations. The study specifically examines the piezometric gauging technique, commonly employed in Crump weirs, for estimating the discharge reduction factor of irrigation barrage weirs under submergence and compares the results with those obtained by the traditional tailwater gauging method. The results establish a unique correlation between the discharge reduction factor and the ratio of the piezometric head at a point immediately downstream of the weir crest and the total pressure head at a location on the upstream face of the weir. The method promises a more accurate estimate of the submerged discharge capacity for the barrage weirs than the conventional procedure. The study also suggests that a steeper upstream slope of a weir potentially leads to greater reduction in discharge under submergence. Further, for a given upstream weir face slope, the discharge reduction varies inversely with the relative crest length. The submergence rate at the modular limit is found to be in the range of 0.70–0.78. The modular limit, however, is found to be independent of the upstream face slope. The accuracy and reliability of the computed results are ensured by conducting relevant grid convergence analyses and validating the results of numerical simulations against experimental data.- 1 December 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 147 (12) , 04021058
Submerged Flow over Barrage Weirs: A Computational Fluid Dynamics Model Study
Barrage weirs, which are trapezoidal-sectioned sharp-crested weirs having finite crest length, are primarily used in the Indian subcontinent for diverting water for irrigation. This study presents an investigative study on submerged flows over barrage weirs, as occurs during floods, and establishes correlations for determining the structure’s coefficient of discharge using a two-dimensional (2D) Reynolds averaged Navier Stokes-volume of fluid (RANS-VOF) model, coupled with the renormalization group (RNG) equations. The study specifically examines the piezometric gauging technique, commonly employed in Crump weirs, for estimating the discharge reduction factor of irrigation barrage weirs under submergence and compares the results with those obtained by the traditional tailwater gauging method. The results establish a unique correlation between the discharge reduction factor and the ratio of the piezometric head at a point immediately downstream of the weir crest and the total pressure head at a location on the upstream face of the weir. The method promises a more accurate estimate of the submerged discharge capacity for the barrage weirs than the conventional procedure. The study also suggests that a steeper upstream slope of a weir potentially leads to greater reduction in discharge under submergence. Further, for a given upstream weir face slope, the discharge reduction varies inversely with the relative crest length. The submergence rate at the modular limit is found to be in the range of 0.70–0.78. The modular limit, however, is found to be independent of the upstream face slope. The accuracy and reliability of the computed results are ensured by conducting relevant grid convergence analyses and validating the results of numerical simulations against experimental data.- 1 November 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 147 (11) , 06021017
Undular Hydraulic Jumps: Critical Analysis of 2D RANS-VOF Simulations
Numerical simulation of undular hydraulic jumps, which occur at an inflow Froude number slightly above unity, remain an important and enigmatic challenge in hydraulic engineering. In this study, a systematic assessment of the two-dimensional (2D) Reynolds averaged Navier Stokes–volume of fluid (RANS-VOF) equations coupled with the shear stress transport (SST) turbulence model was carried out for the simulation of undular jumps. The modeling strategies adopted for obtaining a stable undular jump profile are highlighted in this paper. The correlation between turbulence intensity at the jump toe and jump characteristics is also demonstrated. Comparison of laboratory observations with results obtained from experiments conducted under different discharge, approach Froude number, and inflow conditions demonstrated that the proposed 2D RANS model can accurately reproduce the key free-surface characteristics corresponding to undular jumps. The model was capable of reproducing the velocity and pressure fields with greater accuracy than the depth-averaged model. The model was also successful in reproducing the bottom recirculation region below the first wave crest for undular jumps with partially developed boundary layer at the jump toe. The proposed 2D RANS-VOF computational fluid dynamics (CFD) model coupled with the k–ω SST turbulence closure equation is, therefore, recommended as an efficient tool for hydraulic computations, especially for the simulation of weak undular jumps.- 1 November 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 147 (11) , 06021017
Undular Hydraulic Jumps: Critical Analysis of 2D RANS-VOF Simulations
Numerical simulation of undular hydraulic jumps, which occur at an inflow Froude number slightly above unity, remain an important and enigmatic challenge in hydraulic engineering. In this study, a systematic assessment of the two-dimensional (2D) Reynolds averaged Navier Stokes–volume of fluid (RANS-VOF) equations coupled with the shear stress transport (SST) turbulence model was carried out for the simulation of undular jumps. The modeling strategies adopted for obtaining a stable undular jump profile are highlighted in this paper. The correlation between turbulence intensity at the jump toe and jump characteristics is also demonstrated. Comparison of laboratory observations with results obtained from experiments conducted under different discharge, approach Froude number, and inflow conditions demonstrated that the proposed 2D RANS model can accurately reproduce the key free-surface characteristics corresponding to undular jumps. The model was capable of reproducing the velocity and pressure fields with greater accuracy than the depth-averaged model. The model was also successful in reproducing the bottom recirculation region below the first wave crest for undular jumps with partially developed boundary layer at the jump toe. The proposed 2D RANS-VOF computational fluid dynamics (CFD) model coupled with the k–ω SST turbulence closure equation is, therefore, recommended as an efficient tool for hydraulic computations, especially for the simulation of weak undular jumps.- 16 October 2021
- Published by Taylor & Francis
Modelling Hydrology, Hydraulics and Contaminant Transport Systems in Python
This book covers theoretical aspects of the physical processes, derivation of the governing equations and their solutions. It focusses on hydraulics, hydrology, and contaminant transport, including implementation of computer codes with practical examples. Python-based computer codes for all the solution approaches are provided for better understanding and easy implementation. The mathematical models are demonstrated through applications and the results are analyzed through data tables, plots, and comparison with analytical and experimental data. The concepts are used to solve practical applications like surface and ground water flow, flood routing, crop water requirement and irrigation scheduling. Combines the area of computational hydraulics, hydrology, and water resources engineering with Python Gives deep description of the basic equations and the numerical solutions of both 1D and 2D problems including the numerical codes Includes step-by-step translation of numerical algorithms in computer codes with focus on learners and practitioners Demonstration of theory, mathematical models through practical applications Analysis of each example through data tables, plots, and correlation with reality This book is aimed at senior undergraduates and graduate students in Civil Engineering, Coastal Engineering, Hydrology, and Water Resources Engineering.
- 16 October 2021
- Published by Taylor & Francis
Modelling Hydrology, Hydraulics and Contaminant Transport Systems in Python
This book covers theoretical aspects of the physical processes, derivation of the governing equations and their solutions. It focusses on hydraulics, hydrology, and contaminant transport, including implementation of computer codes with practical examples. Python-based computer codes for all the solution approaches are provided for better understanding and easy implementation. The mathematical models are demonstrated through applications and the results are analyzed through data tables, plots, and comparison with analytical and experimental data. The concepts are used to solve practical applications like surface and ground water flow, flood routing, crop water requirement and irrigation scheduling. Combines the area of computational hydraulics, hydrology, and water resources engineering with Python Gives deep description of the basic equations and the numerical solutions of both 1D and 2D problems including the numerical codes Includes step-by-step translation of numerical algorithms in computer codes with focus on learners and practitioners Demonstration of theory, mathematical models through practical applications Analysis of each example through data tables, plots, and correlation with reality This book is aimed at senior undergraduates and graduate students in Civil Engineering, Coastal Engineering, Hydrology, and Water Resources Engineering.