Hongfu Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hongfu Xie has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Xide Li
Department of Engineering Mechanics, Tsinghua University, Beijing, China
3 shared publications Jiecun Liang
Tsinghua University, Beijing, Beijing, China
2 shared publications- Chong Zhao
Department of Gastroenterology, Lab of Gastroenterology and Hepatology, State Key Laboratory of Biotherapy, West China Hospital, Sichuan University, Chengdu, China
1 shared publication - Jie Wang
Pengcheng Laboratory, Shenzhen 518000, China
1 shared publication - Junsheng Cheng
Institute of Electrical Engineering, Chinese Academy of Sciences
1 shared publication - Liuyang Shen
Mechanics and Engineering Sciences, Lanzhou University, 12426 Lanzhou, Gansu China
1 shared publication
Latest Publications
- 17 May 2021
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 32 (8) , 084008
In situ scanning–digital image correlation for high-temperature deformation measurement of nickel-based single crystal superalloy
In situ microscopic observation and measurement of deformations for advanced hot-section materials at high-temperature is helpful in understanding their failure mechanisms. Scanning electron microscopy (SEM) and a digital image correlation (DIC) method are combined to capture the failure process. This article reports an in situ high-temperature testing system which can heat the specimen up to 1000 °C and provide clear images simultaneously. The Al 2 O 3 nanoscale particles are developed as high-temperature deformation carriers in SEM–DIC, which are suitable for high-temperature samples with significant advantages of stability, high image contrast and without shedding or melting up to 1000 °C. High-temperature tensile and creep properties of a nickel-based single crystal superalloy (NBSCS) at 750 °C were investigated using this system. In addition, a scanning–DIC (S–DIC) method, which avoids errors introduced by conventional DIC methods, was used to calculate full-field dynamic displacement and strain of high-temperature NBSCS samples. Analysis of the strain fields show that the strain concentrations are generally at the positions of crack initiation or propagation, and the creep cracks interact with each other through the strain field. Finally, the crack opening displacement is obtained using the virtual extensometer.
- 17 May 2021
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 32 (8) , 084008
In situ scanning–digital image correlation for high-temperature deformation measurement of nickel-based single crystal superalloy
In situ microscopic observation and measurement of deformations for advanced hot-section materials at high-temperature is helpful in understanding their failure mechanisms. Scanning electron microscopy (SEM) and a digital image correlation (DIC) method are combined to capture the failure process. This article reports an in situ high-temperature testing system which can heat the specimen up to 1000 °C and provide clear images simultaneously. The Al 2 O 3 nanoscale particles are developed as high-temperature deformation carriers in SEM–DIC, which are suitable for high-temperature samples with significant advantages of stability, high image contrast and without shedding or melting up to 1000 °C. High-temperature tensile and creep properties of a nickel-based single crystal superalloy (NBSCS) at 750 °C were investigated using this system. In addition, a scanning–DIC (S–DIC) method, which avoids errors introduced by conventional DIC methods, was used to calculate full-field dynamic displacement and strain of high-temperature NBSCS samples. Analysis of the strain fields show that the strain concentrations are generally at the positions of crack initiation or propagation, and the creep cracks interact with each other through the strain field. Finally, the crack opening displacement is obtained using the virtual extensometer.
- 12 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Image Processing
- Vol. 29 (10577149) , 7290-7305
Scanning Imaging Restoration of Moving or Dynamically Deforming Objects
The raster scanning imaging mode is widely used in scanning electron microscopes (SEMs), transmission electron microscopes (TEM), and atomic force microscopes (AFM), and can achieve subatomic resolution. However, only a point on the shallow surface of an object can be imaged at one time using the raster scanning imaging mode, whereas the entire surface of the object can be imaged in the image plane once and instantaneously using the optical imaging mode, which is a parallel imaging mode. Therefore, the image distortion and blur for the scanning imaging mode are different from the optical imaging. In this paper, we propose a theory to describe the mechanism of the scanning imaging process and restore the degraded image (distorted and blurred image) obtained using an SEM. The theory consists of a scanning equation, motion or deformation equations, and an assumption called the intensity-invariant hypothesis. Numerical simulations of the scanning imaging process and restoration of the degraded images are performed using the scanning imaging formulas, spatial non-uniform point spread function, and inverse restoration algorithms, including algebraic, interpolation, and their hybrid methods to verify the feasibility of our theory. In situ experiments on uniform linear motion, uniaxial tensile, and fatigue were also conducted to demonstrate the validity and efficiency of the proposed scanning imaging theory and restoration methods. We anticipate that this imaging and restoration theory will enable the scanning imaging mode to be used in in situ dynamic imaging and for mechanical property measurement of materials.
- 12 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Image Processing
- Vol. 29 (10577149) , 7290-7305
Scanning Imaging Restoration of Moving or Dynamically Deforming Objects
The raster scanning imaging mode is widely used in scanning electron microscopes (SEMs), transmission electron microscopes (TEM), and atomic force microscopes (AFM), and can achieve subatomic resolution. However, only a point on the shallow surface of an object can be imaged at one time using the raster scanning imaging mode, whereas the entire surface of the object can be imaged in the image plane once and instantaneously using the optical imaging mode, which is a parallel imaging mode. Therefore, the image distortion and blur for the scanning imaging mode are different from the optical imaging. In this paper, we propose a theory to describe the mechanism of the scanning imaging process and restore the degraded image (distorted and blurred image) obtained using an SEM. The theory consists of a scanning equation, motion or deformation equations, and an assumption called the intensity-invariant hypothesis. Numerical simulations of the scanning imaging process and restoration of the degraded images are performed using the scanning imaging formulas, spatial non-uniform point spread function, and inverse restoration algorithms, including algebraic, interpolation, and their hybrid methods to verify the feasibility of our theory. In situ experiments on uniform linear motion, uniaxial tensile, and fatigue were also conducted to demonstrate the validity and efficiency of the proposed scanning imaging theory and restoration methods. We anticipate that this imaging and restoration theory will enable the scanning imaging mode to be used in in situ dynamic imaging and for mechanical property measurement of materials.
- 7 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (6) , 1-8
Bending-Peeling Method to Research the Effect of Lateral Stress on Superconductivity of REBCO Tape at Liquid-Nitrogen Temperature
Rare earth barium copper oxide (REBCO)-type materials are widely used in second-generation high-temperature superconductor tapes to carry high current volumes. These tapes can provide high critical currents along with good tolerance to perpendicular magnetic fields. However, REBCO tapes generally use a laminate structure that suffers from low peeling strength among its inner interfaces. Previously, we proposed a bending-peeling (BP) method and applied it to measurement of the interfacial strength of REBCO tapes at room temperature. All samples failed at the REBCO layer at room temperature. In this work, we used the BP method to perform low-temperature interfacial strength measurements at liquid-nitrogen temperatures. There are two types of failure, where one involves peeling of the REBCO layer and the other involves peeling at the interface between the tape and the epoxy resin. The errors in the BP method were discussed in detail. The superconducting current was monitored during the BP experiment and showed that the effect of out-of-plane tensile stress on the superconducting current was not significant before the breaking of the tape. The degradation in the superconductivity is mainly caused by the structural failure of the REBCO layer.
- 7 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (6) , 1-8
Bending-Peeling Method to Research the Effect of Lateral Stress on Superconductivity of REBCO Tape at Liquid-Nitrogen Temperature
Rare earth barium copper oxide (REBCO)-type materials are widely used in second-generation high-temperature superconductor tapes to carry high current volumes. These tapes can provide high critical currents along with good tolerance to perpendicular magnetic fields. However, REBCO tapes generally use a laminate structure that suffers from low peeling strength among its inner interfaces. Previously, we proposed a bending-peeling (BP) method and applied it to measurement of the interfacial strength of REBCO tapes at room temperature. All samples failed at the REBCO layer at room temperature. In this work, we used the BP method to perform low-temperature interfacial strength measurements at liquid-nitrogen temperatures. There are two types of failure, where one involves peeling of the REBCO layer and the other involves peeling at the interface between the tape and the epoxy resin. The errors in the BP method were discussed in detail. The superconducting current was monitored during the BP experiment and showed that the effect of out-of-plane tensile stress on the superconducting current was not significant before the breaking of the tape. The degradation in the superconductivity is mainly caused by the structural failure of the REBCO layer.