JLJongyup Lim

Jongyup Lim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jongyup Lim has a total of 81 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Sub-mm3 Wireless Neural Stimulator IC for Visual Cortical Prosthesis With Optical Power Harvesting and 7.5-kb/s Data Telemetry

    by Jungho Lee, Joseph G. Letner, Jongyup Lim, Gabriele Atzeni, Jiawei Liao, Abhilasha Kamboj, Bhavika Mani, Seokhyeon Jeong, Yejoong Kim, Yi Sun, et al.

    This article proposes StiMote, an untethered, free-floating and individually addressable stimulator mote designed for visual cortex stimulation, aimed at vision restoration. The system is optically powered by a custom photovoltaic (PV) layer. In addition, the photodiode (PD) layer captures the light modulation and forwards it to the optical receiver (ORX) including a tranimpedance amplifier. Translated instructions can assign a unique slot, up to 1024 available, to each mote within the time-division multiple access (TDMA) framework. In this work, we propose an automatic charge balance (CB) technique that monitors the injected charge to balance in bi-phasic switched-capacitor stimulation (SCS). The chip was confirmed fully functional when operated completely wirelessly using harvested light. Measurement results revealed a power consumption of 4.48 $\mu$ W with a 7.5-kb/s optical downlink data rate, corresponding to continuous updates at 2.5 Hz of 1024 motes to their individual 3-b stimulation intensity levels. The dc–dc converter, responsible for providing high voltage for stimulation, demonstrated 4.3-V output voltage when unloaded, with a maximum efficiency of 67.4%. The proposed CB circuit exhibited linear controllability of stimulation charge up to 16 nC, with a charge imbalance of less than 0.2 nC. Furthermore, in vitro testing confirmed the absence of chemical reactions at electrodes, and in vivo experiments conducted on live rats verified the effectiveness of the stimulation through StiMote.


  • A low-power communication scheme for wireless, 1000 channel brain–machine interfaces

    by Joseph T Costello, Samuel R Nason-Tomaszewski, Hyochan An, Jungho Lee, Matthew J Mender, Hisham Temmar, Dylan M Wallace, Jongyup Lim, Matthew S Willsey, Parag G Patil, et al.

    Objective . Brain–machine interfaces (BMIs) have the potential to restore motor function but are currently limited by electrode count and long-term recording stability. These challenges may be solved through the use of free-floating ‘motes’ which wirelessly transmit recorded neural signals, if power consumption can be kept within safe levels when scaling to thousands of motes. Here, we evaluated a pulse-interval modulation (PIM) communication scheme for infrared (IR)-based motes that aims to reduce the wireless data rate and system power consumption. Approach . To test PIM’s ability to efficiently communicate neural information, we simulated the communication scheme in a real-time closed-loop BMI with non-human primates. Additionally, we performed circuit simulations of an IR-based 1000-mote system to calculate communication accuracy and total power consumption. Main results . We found that PIM at 1 kb/s per channel maintained strong correlations with true firing rate and matched online BMI performance of a traditional wired system. Closed-loop BMI tests suggest that lags as small as 30 ms can have significant performance effects. Finally, unlike other IR communication schemes, PIM is feasible in terms of power, and neural data can accurately be recovered on a receiver using 3 mW for 1000 channels. Significance. These results suggest that PIM-based communication could significantly reduce power usage of wireless motes to enable higher channel-counts for high-performance BMIs.


  • A Power-Efficient Brain-Machine Interface System With a Sub-mw Feature Extraction and Decoding ASIC Demonstrated in Nonhuman Primates

    by Hyochan An, Samuel R. Nason-Tomaszewski, Jongyup Lim, Kyumin Kwon, Matthew S. Willsey, Parag G. Patil, Hun-Seok Kim, Dennis Sylvester, Cynthia A. Chestek, David Blaauw

    Intracortical brain-machine interfaces have shown promise for restoring function to people with paralysis, but their translation to portable and implantable devices is hindered by their high power consumption. Recent devices have drastically reduced power consumption compared to standard experimental brain-machine interfaces, but still require wired or wireless connections to computing hardware for feature extraction and inference. Here, we introduce a Neural Recording And Decoding (NeuRAD) application specific integrated circuit (ASIC) in 180 nm CMOS that can extract neural spiking features and predict two-dimensional behaviors in real-time. To reduce amplifier and feature extraction power consumption, the NeuRAD has a hardware accelerator for extracting spiking band power (SBP) from intracortical spiking signals and includes an M0 processor with a fixed-point Matrix Acceleration Unit (MAU) for efficient and flexible decoding. We validated device functionality by recording SBP from a nonhuman primate implanted with a Utah microelectrode array and predicting the one- and two-dimensional finger movements the monkey was attempting to execute in closed-loop using a steady-state Kalman filter (SSKF). Using the NeuRAD’s real-time predictions, the monkey achieved 100% success rate and 0.82 s mean target acquisition time to control one-dimensional finger movements using just 581 $\mu$ W. To predict two-dimensional finger movements, the NeuRAD consumed 588 $\mu$ W to enable the monkey to achieve a 96% success rate and 2.4 s mean acquisition time. By employing SBP, ASIC brain-machine interfaces can close the gap to enable fully implantable therapies for people with paralysis.


  • A Light-Tolerant Wireless Neural Recording IC for Motor Prediction With Near-Infrared-Based Power and Data Telemetry

    by Jongyup Lim, Jungho Lee, Eunseong Moon, Michael Barrow, Gabriele Atzeni, Joseph G. Letner, Joseph T. Costello, Samuel R. Nason, Paras R. Patel, Yi Sun, et al.

    Miniaturized and wireless near-infrared (NIR)-based neural recorders with optical powering and data telemetry have been introduced as a promising approach for safe long-term monitoring with the smallest physical dimension among state-of-the-art standalone recorders. However, the main challenge for the NIR-based neural recording integrated circuits (ICs) is to maintain robust operation in the presence of light-induced parasitic short-circuit current from junction diodes. This is especially true when the signal currents are kept small to reduce power consumption. In this work, we present a light-tolerant and low-power neural recording IC for motor prediction that can fully function in up to 300 $\mu \text{W}$ /mm 2 of light exposure. It achieves the best-in-class power consumption of 0.57 $\mu \text{W}$ at 38 °C with a 4.1 noise efficiency factor (NEF) pseudo-resistor-less amplifier, an on- chip neural feature extractor, and individual mote-level gain control. Applying the 20-channel pre-recorded neural signals of a monkey, the IC predicts finger position and velocity with a correlation coefficient up to 0.870 and 0.569, respectively, with individual mote-level gain control enabled. In addition, wireless measurement is demonstrated through optical power and data telemetry using a custom photovoltaic (PV)/light-emitting diode (LED) GaAs chip wire bonded to the proposed IC.


  • A Light Tolerant Neural Recording IC for Near-Infrared-Powered Free Floating Motes

    by Jongyup Lim, Jungho Lee, Eunseong Moon, Michael Barrow, Gabriele Atzeni, Joseph Letner, Joseph Costello, Samuel R. Nason, Paras R. Patel, Parag G. Patil, et al.

    A key challenge for near-infrared (NIR) powered neural recording ICs is to maintain robust operation in the presence of parasitic short circuit current from junction diodes when exposed to light. This is especially so when intentional currents are kept small to reduce power consumption. We present a neural recording IC that is tolerant up to 300 µW/mm 2 light exposure (above tissue limit) and consumes 0.57 µW at 38°C, making it lowest power among standalone motes while incorporating on-chip feature extraction and individual gain control.


  • A 510-pW 32-kHz Crystal Oscillator With High Energy-to-Noise-Ratio Pulse Injection

    by Li Xu, Taekwang Jang, Jongyup Lim, Kyojin David Choo, David Blaauw, Dennis Sylvester

    This article introduces a 32-kHz crystal oscillator (XO) with high energy-to-noise-ratio pulse injection at subharmonic frequency. A T/4-delay clock slicer is proposed to convert the sinusoidal crystal waveform into an output clock of 32 kHz and to introduce a delay of T/4, providing proper timing for energy injections. The output clock feeds frequency dividers and generates pulses to activate the proposed all-NMOS differential driver at 4 kHz. It enables two injections in eight periods at the peak and valley of the crystal oscillation, with the crystal running freely between injections. This configuration achieves a 2-ppb Allan deviation floor. The less frequent injections reduce the injection overhead, enabling the lowest reported power consumption of published nW XOs (0.51 nW). At 0.45 V, the proposed XO operates across a temperature range of $- 25\,\,^{\circ }\text{C}$ to 125 °C, the widest reported range for nW XOs. This design is fabricated in the 40-nm CMOS and occupies 0.02 mm 2 .


  • Dual-Junction GaAs Photovoltaics for Low Irradiance Wireless Power Transfer in Submillimeter-Scale Sensor Nodes

    by Eunseong Moon, Michael Barrow, Jongyup Lim, David Blaauw, Jamie D. Phillips

    Dual-junction GaAs photovoltaic (PV) cells and modules at submillimeter scale are demonstrated for efficient wireless power transfer for Internet of Things and bio-implantable applications under low-flux illumination. The dual-junction approach meets demanding requirements for these applications by increasing the output voltage per cell with reduced area losses from isolation and interconnects. A single PV cell (150 μm × 150 μm) based on the dual-junction design demonstrates power conversion efficiency above 22% with greater than 1.2 V output voltage under low-flux 850 nm near-infrared LED illumination at 6.62 μW/mm 2 , which is sufficient for the batteryless operation of miniaturized CMOS IC chips. The output voltage of dual-junction PV modules with four series-connected cells demonstrates greater than 5 V for direct battery charging while maintaining a module power conversion efficiency of more than 23%.


  • An Efficient Piezoelectric Energy Harvesting Interface Circuit Using a Sense-and-Set Rectifier

    by Yimai Peng, Kyojin D. Choo, Sechang Oh, Inhee Lee, Taekwang Jang, Yejoong Kim, Jongyup Lim, David Blaauw, Dennis Sylvester


  • A Self-Tuning IoT Processor Using Leakage-Ratio Measurement for Energy-Optimal Operation

    by Jeongsup Lee, Satoru Miyoshi, Masaru Kawaminami, David Blaauw, Dennis Sylvester, Yiqun Zhang, Qing Dong, Wootaek Lim, Mehdi Saligane, Yejoong Kim, et al.

    Energy-optimal operation is one of the key requirements of the Internet-of-Things (IoT) applications to increase battery life. In this article, using a combination of dynamic voltage scaling (DVS) and adaptive body biasing (ABB), the energy-optimal operation is achieved with a given fixed operating frequency determined by application demands. Based on the observation that the ratio of leakage power to dynamic power can be an accurate indicator for the optimal operating point, the proposed method dynamically tracks the minimum energy operating points by adjusting supply voltage and body bias with very low hardware and power overhead. A custom dc-dc converter for supply voltage regulation and charge pumps for body bias generation were implemented with the proposed method in a Cortex-M0 processor. Since SRAM is included in the same energy optimization loop as the processor, a custom SRAM was designed to match the processor speed. The design is fabricated in an Mie Fujitsu Semiconductor (MIFS) 55-nm deeply depleted channel (DDC) CMOS and the proposed approach achieves energy consumption within 4.6% of optimal at 1 MHz across five process corners and temperatures from -20 °C to 125 °C. The fabricated processor achieves 6.4 pJ/cycle at 0.55-V and 500-kHz clock frequency.


  • An Acoustic Signal Processing Chip With 142-nW Voice Activity Detection Using Mixer-Based Sequential Frequency Scanning and Neural Network Classification

    by Sechang Oh, Hun-Seok Kim, Dennis Sylvester, Minchang Cho, Zhan Shi, Jongyup Lim, Yejoong Kim, Seokhyeon Jeong, Yu Chen, Rohit Rothe, et al.

    This article presents a voice and acoustic activity detector that uses a mixer-based architecture and ultra-low-power neural network (NN)-based classifier. By sequentially scanning 4 kHz of frequency bands and down-converting to below 500 Hz, feature extraction power consumption is reduced by 4x. The NN processor employs computational sprinting, enabling 12x power reduction. The system also features inaudible acoustic signature detection for intentional remote silent wakeup of the system while re-using a subset of the same system components. The measurement results achieve 91.5%/90% speech/non-speech hit rates at 10-dB SNR with babble noise and 142-nW power consumption. Acoustic signature detection consumes 66 nW, successfully detecting a signature 10 dB below the noise level.