Ayelén Villalba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ayelén Villalba has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Andrea Pattini
Consejo Nacional de Investigaciones Científicas y Técnicas, Argentina
10 shared publications - Juan Manuel Monteoliva
Consejo Nacional de Investigaciones Científicas y Técnicas, Argentina
8 shared publications - Julieta Alejandra Yamin Garreton
Consejo Nacional de Investigaciones Científicas y Técnicas, Mendoza, Argentina
4 shared publications - Noelia Liliana Alchapar
Institute of Environment, Habitat and Energy. National Scientific and Technical Research Council (INHAE-CONICET)
4 shared publications Andrea Elvira Pattini
3 shared publicationsAndrea Pattini
3 shared publications
Latest Publications
- Open Access
- 31 July 2026
- Published by Sistema de Bibliotecas UACH in AUS
- No. 39,p. 60-68
Confort visual en galerías exteriores: deslumbramiento versus acceso a la vista al exterior. Caso de estudio: red de sombreado
La calidad de la vista y el desempeño lumínico de los dispositivos de sombreado se han estudiado principalmente en espacios interiores, pero aún no se han examinado de manera conjunta en galerías semiabiertas. Este trabajo evalúa el deslumbramiento y la calidad de la vista exterior de un sistema de sombreado tipo red de camuflaje con un 75% de cobertura. Se realizó un experimento semicontrolado en una galería de una vivienda orientada al noroeste con vistas a la cordillera de los Andes, en Mendoza, Argentina. Veinte personas evaluaron esta red en tres condiciones: sin sombreado, red desplegada y red plegada. Se tomaron medidas fotométricas y se aplicó un cuestionario sobre confort visual. Los resultados mostraron que el uso de la red reduce de manera significativa el deslumbramiento y mejora el confort térmico, aunque disminuye la calidad de la vista exterior, poniéndose en evidencia la dificultad de lograr un equilibrio entre la calidad de visual y el control del deslumbramiento.
- 31 July 2026
- Published by Sistema de Bibliotecas UACH in AUS
- No. 39,p. 60-68
Open AccessConfort visual en galerías exteriores: deslumbramiento versus acceso a la vista al exterior. Caso de estudio: red de sombreado
La calidad de la vista y el desempeño lumínico de los dispositivos de sombreado se han estudiado principalmente en espacios interiores, pero aún no se han examinado de manera conjunta en galerías semiabiertas. Este trabajo evalúa el deslumbramiento y la calidad de la vista exterior de un sistema de sombreado tipo red de camuflaje con un 75% de cobertura. Se realizó un experimento semicontrolado en una galería de una vivienda orientada al noroeste con vistas a la cordillera de los Andes, en Mendoza, Argentina. Veinte personas evaluaron esta red en tres condiciones: sin sombreado, red desplegada y red plegada. Se tomaron medidas fotométricas y se aplicó un cuestionario sobre confort visual. Los resultados mostraron que el uso de la red reduce de manera significativa el deslumbramiento y mejora el confort térmico, aunque disminuye la calidad de la vista exterior, poniéndose en evidencia la dificultad de lograr un equilibrio entre la calidad de visual y el control del deslumbramiento.
- Open Access
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Development of mycelium-based composites from vineyard pruning residues toward sustainable construction applications
The growing demand for low-impact materials and the need to valorize agricultural residues have increased interest in mycelium-based biocomposites as sustainable alternatives for construction applications. This study developed and validated a production protocol for mycelium-based biocomposites derived from vineyard pruning residues (VPR). Viticultural waste was inoculated with Ganoderma spp. to obtain a cohesive and mechanically resistant material. After characterizing the VPR fibers, the growth rate and colonization capacity of three Ganoderma strains were compared by image analysis, and Ganoderma sessile was selected as the most suitable strain. Specimens were then fabricated to evaluate the effects of packing density, geometry, and drying conditions on shrinkage and deformation. The results showed that post-molding dehydration at 80 °C effectively minimized dimensional deformations and moisture content. Furthermore, packing density significantly influenced compressive and flexural performance, as well as dimensional stability. Densely packed composites exhibited superior mechanical behavior compared with loosely packed specimens, reaching a compressive strength of 0.23 MPa, an elastic modulus of 2.48 MPa, and a flexural strength of 0.39 MPa, thereby outperforming reported values for MBCs utilizing other natural fibers. Overall, the proposed protocol enables the fabrication of functional molded biocomposites from locally available vineyard residues, supporting the valorization of agricultural waste within cleaner production framework.
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDevelopment of mycelium-based composites from vineyard pruning residues toward sustainable construction applications
The growing demand for low-impact materials and the need to valorize agricultural residues have increased interest in mycelium-based biocomposites as sustainable alternatives for construction applications. This study developed and validated a production protocol for mycelium-based biocomposites derived from vineyard pruning residues (VPR). Viticultural waste was inoculated with Ganoderma spp. to obtain a cohesive and mechanically resistant material. After characterizing the VPR fibers, the growth rate and colonization capacity of three Ganoderma strains were compared by image analysis, and Ganoderma sessile was selected as the most suitable strain. Specimens were then fabricated to evaluate the effects of packing density, geometry, and drying conditions on shrinkage and deformation. The results showed that post-molding dehydration at 80 °C effectively minimized dimensional deformations and moisture content. Furthermore, packing density significantly influenced compressive and flexural performance, as well as dimensional stability. Densely packed composites exhibited superior mechanical behavior compared with loosely packed specimens, reaching a compressive strength of 0.23 MPa, an elastic modulus of 2.48 MPa, and a flexural strength of 0.39 MPa, thereby outperforming reported values for MBCs utilizing other natural fibers. Overall, the proposed protocol enables the fabrication of functional molded biocomposites from locally available vineyard residues, supporting the valorization of agricultural waste within cleaner production framework.
- 7 October 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 114
Decision tree-based modeling of daylight availability for perimeter offices in the Southern Hemisphere
- 7 October 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 114
Decision tree-based modeling of daylight availability for perimeter offices in the Southern Hemisphere
- Open Access
- 29 July 2025
- Published by Universidad de Cuenca in ESTOA
- Vol. 14 (28) , 38-51
Análisis comparativo de materiales aislantes térmicos convencionales y no convencionales para la construcción
Actualmente se busca minimizar el impacto ambiental de la industria de la construcción generado por el uso de materias primas no renovables y los altos consumos energéticos que implica su producción. La principal estrategia para mejorar el rendimiento energético de las construcciones es a través del uso eficiente del aislamiento térmico. Este estudio ofrece una revisión de los materiales aislantes térmicos resistivos disponibles considerando sus propiedades térmicas y físicas, precios y presentaciones. Los materiales se clasificaron según su origen, estructura conformativa y su difusión en el parque edilicio (convencionales, no convencionales). El análisis revela que, en términos de conductividad térmica, los materiales de origen sintético muestran valores más bajos, mientras que los naturales, especialmente los no convencionales, destacados por sus prestaciones ambientales presentan comportamientos térmicos comparables a los de uso convencional. Además, se evalúa la relación entre precio y eficiencia térmica, identificando materiales convencionales y no convencionales con buena relación precio-calidad.
- 29 July 2025
- Published by Universidad de Cuenca in ESTOA
- Vol. 14 (28) , 38-51
Open AccessAnálisis comparativo de materiales aislantes térmicos convencionales y no convencionales para la construcción
Actualmente se busca minimizar el impacto ambiental de la industria de la construcción generado por el uso de materias primas no renovables y los altos consumos energéticos que implica su producción. La principal estrategia para mejorar el rendimiento energético de las construcciones es a través del uso eficiente del aislamiento térmico. Este estudio ofrece una revisión de los materiales aislantes térmicos resistivos disponibles considerando sus propiedades térmicas y físicas, precios y presentaciones. Los materiales se clasificaron según su origen, estructura conformativa y su difusión en el parque edilicio (convencionales, no convencionales). El análisis revela que, en términos de conductividad térmica, los materiales de origen sintético muestran valores más bajos, mientras que los naturales, especialmente los no convencionales, destacados por sus prestaciones ambientales presentan comportamientos térmicos comparables a los de uso convencional. Además, se evalúa la relación entre precio y eficiencia térmica, identificando materiales convencionales y no convencionales con buena relación precio-calidad.
- Open Access
- 22 February 2025
- Published by MDPI AG in Urban Science
- Vol. 9 (3) , 57
Effective and Affordable Methodologies for the Optical Characterization of Envelope Materials Within Urban Contexts
The optical properties of urban envelope materials play a significant role in determining the energy balance of cities. The effective management of solar energy through these materials can help mitigate the urban heat island effect (UHI) and improve thermal comfort in urban spaces. The main objective of this study is to determine reliable methodologies for the optical characterization of opaque façade and pavement materials within urban enclosures. These methodologies should be cost-effective for implementation in emerging economies, enabling the collection of precise data for the development of urban energy simulation models. A social neighborhood in the city of Mendoza, Argentina, was selected as the case study. The optical properties of façade and pavement materials were characterized by spectrometric analysis (solar and visible reflectance, color coordinates) and in situ thermal emissivity. This research provides essential data for the development of more precise building and city simulation models, as well as for the identification of optimal materials to replace existing ones in the pursuit of strategies to reduce energy demand and enhance the urban microclimate.
- 22 February 2025
- Published by MDPI AG in Urban Science
- Vol. 9 (3) , 57
Open AccessEffective and Affordable Methodologies for the Optical Characterization of Envelope Materials Within Urban Contexts
The optical properties of urban envelope materials play a significant role in determining the energy balance of cities. The effective management of solar energy through these materials can help mitigate the urban heat island effect (UHI) and improve thermal comfort in urban spaces. The main objective of this study is to determine reliable methodologies for the optical characterization of opaque façade and pavement materials within urban enclosures. These methodologies should be cost-effective for implementation in emerging economies, enabling the collection of precise data for the development of urban energy simulation models. A social neighborhood in the city of Mendoza, Argentina, was selected as the case study. The optical properties of façade and pavement materials were characterized by spectrometric analysis (solar and visible reflectance, color coordinates) and in situ thermal emissivity. This research provides essential data for the development of more precise building and city simulation models, as well as for the identification of optimal materials to replace existing ones in the pursuit of strategies to reduce energy demand and enhance the urban microclimate.
- 12 September 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 97
Effect of fabric shades optical properties on indoor daylighting conditions: An overview
- 12 September 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 97
Effect of fabric shades optical properties on indoor daylighting conditions: An overview
- Open Access
- 1 March 2023
- Published by Editorial CSIC in Informes de la Construcción
- Vol. 75 (569) , e484
Deslumbramiento molesto en textiles: métricas basadas en efecto de saturación y/o contraste
Se evaluó el nivel de deslumbramiento producido por nueve textiles. Este tipo de sistema de sombreado muchas veces es comercializado sin una adecuada caracterización fotométrica, lo que conlleva a una aplicación inadecuada de los mismos, produciendo incrementos en las molestias visuales de los usuarios y mayores consumos de energía. Para evaluar el deslumbramiento, se calcularon cuatro métricas diferentes. Estas métricas están basadas en el efecto de saturación, contraste o ambas. Asimismo, se evaluó qué métricas conviene utilizar, si una específica a la condición lumínica predominante, una métrica general aplicable a todas las condiciones lumínicas o una combinación de ambas. En este estudio se observó que la métrica de contraste fue más sensible al deslumbramiento, pero la utilización de dos métricas de una manera aditiva ofrece una mejor jerarquización de los textiles. Como objetivo final se propone un sistema de puntuación para evaluar el comportamiento de textiles frente al deslumbramiento.
- 1 March 2023
- Published by Editorial CSIC in Informes de la Construcción
- Vol. 75 (569) , e484
Open AccessDeslumbramiento molesto en textiles: métricas basadas en efecto de saturación y/o contraste
Se evaluó el nivel de deslumbramiento producido por nueve textiles. Este tipo de sistema de sombreado muchas veces es comercializado sin una adecuada caracterización fotométrica, lo que conlleva a una aplicación inadecuada de los mismos, produciendo incrementos en las molestias visuales de los usuarios y mayores consumos de energía. Para evaluar el deslumbramiento, se calcularon cuatro métricas diferentes. Estas métricas están basadas en el efecto de saturación, contraste o ambas. Asimismo, se evaluó qué métricas conviene utilizar, si una específica a la condición lumínica predominante, una métrica general aplicable a todas las condiciones lumínicas o una combinación de ambas. En este estudio se observó que la métrica de contraste fue más sensible al deslumbramiento, pero la utilización de dos métricas de una manera aditiva ofrece una mejor jerarquización de los textiles. Como objetivo final se propone un sistema de puntuación para evaluar el comportamiento de textiles frente al deslumbramiento.
- 27 April 2022
- Published by SAGE Publications in Lighting Research & Technology
- Vol. 55 (6) , 530-553
The impact of woven shade fabrics on correlated colour temperature and illuminance with daylighting
When solar radiation passes through a window, its spectral composition changes due to the presence of shades and glazing. While many studies have analysed the impact of different types of glass on correlated colour temperature (CCT), there are only a few cases in which the effect of shading and daylighting systems on this parameter was tested. This work analyses the impact of woven shade fabrics on the spectrum and intensity of daylight conditions in indoor spaces. A combined analysis of horizontal illuminance ( Eh) and CCT was performed. It focused on the impact that physical properties of woven shade fabrics – colour and openness factor (OF) – had on the CCT and Eh values. In this study, 11 fabrics with different colours (white, grey and black) and varying OF were analysed. For the set of studied woven shade fabrics, it was found that fabric OF and colour had a significant effect on CCT and Eh. Results show that white and grey fabrics provided spaces with lower values of CCT than black fabrics. CCT values were compared with those proposed by standard EN 12464-1:2011.
- 27 April 2022
- Published by SAGE Publications in Lighting Research & Technology
- Vol. 55 (6) , 530-553
The impact of woven shade fabrics on correlated colour temperature and illuminance with daylighting
When solar radiation passes through a window, its spectral composition changes due to the presence of shades and glazing. While many studies have analysed the impact of different types of glass on correlated colour temperature (CCT), there are only a few cases in which the effect of shading and daylighting systems on this parameter was tested. This work analyses the impact of woven shade fabrics on the spectrum and intensity of daylight conditions in indoor spaces. A combined analysis of horizontal illuminance ( Eh) and CCT was performed. It focused on the impact that physical properties of woven shade fabrics – colour and openness factor (OF) – had on the CCT and Eh values. In this study, 11 fabrics with different colours (white, grey and black) and varying OF were analysed. For the set of studied woven shade fabrics, it was found that fabric OF and colour had a significant effect on CCT and Eh. Results show that white and grey fabrics provided spaces with lower values of CCT than black fabrics. CCT values were compared with those proposed by standard EN 12464-1:2011.
- Open Access
- 29 January 2022
- Published by SolarLits in Journal of Daylighting
- Vol. 9 (1) , 1-12
Effect of Roller Shades on Chromaticity and Colour Rendering Performance of Transmitted Daylight
Several studies have focused on the performance of roller shades in terms of glare, outdoor vision, daylight availability and energy performance. Currently, other parameters linked to visual amenity, such as chromaticity and colour rendition, are becoming relevant. When solar radiation passes through a window, it changes its spectral composition due to the presence of the solar shading system and the glazing. Against this background, the present study focuses on the spectral transmittance of eleven woven screen fabrics and its influence on the chromaticity and colour rendition. Results show that dark-coloured woven screen shades provide higher correlated colour temperature (CCT) values (range 6470 K - 6479 K) and therefore would produce “cooler” visual environments, while light-coloured woven screen shades provide lower CCT values (range 5210 K - 5644 K) creating “warmer” visual environments. Regarding colour rendering metrics, the light transmitted through all the studied woven shades shows excellent colour rendition. Finally, it is concluded that the combined analysis of optical properties, spectral data and its impact on parameters that determine the quality of lighting in an interior space enables an understanding of woven screens performance, which results in the possibility of taking appropriate decisions when selecting woven shades.
- 29 January 2022
- Published by SolarLits in Journal of Daylighting
- Vol. 9 (1) , 1-12
Open AccessEffect of Roller Shades on Chromaticity and Colour Rendering Performance of Transmitted Daylight
Several studies have focused on the performance of roller shades in terms of glare, outdoor vision, daylight availability and energy performance. Currently, other parameters linked to visual amenity, such as chromaticity and colour rendition, are becoming relevant. When solar radiation passes through a window, it changes its spectral composition due to the presence of the solar shading system and the glazing. Against this background, the present study focuses on the spectral transmittance of eleven woven screen fabrics and its influence on the chromaticity and colour rendition. Results show that dark-coloured woven screen shades provide higher correlated colour temperature (CCT) values (range 6470 K - 6479 K) and therefore would produce “cooler” visual environments, while light-coloured woven screen shades provide lower CCT values (range 5210 K - 5644 K) creating “warmer” visual environments. Regarding colour rendering metrics, the light transmitted through all the studied woven shades shows excellent colour rendition. Finally, it is concluded that the combined analysis of optical properties, spectral data and its impact on parameters that determine the quality of lighting in an interior space enables an understanding of woven screens performance, which results in the possibility of taking appropriate decisions when selecting woven shades.
- 21 May 2020
- Published by SAGE Publications in Indoor and Built Environment
- Vol. 30 (7) , 970-984
Development of a simplified light reflectance value assessment tool for indoor surface coverings
Light reflectance value (LRV) of indoor surfaces impacts on electricity consumption for lighting. For this reason, inner surface reflectance is one of the parameters required by building energy efficiency codes and standards. In countries with advanced building energy certification processes, the LRV of coatings and paints is given by manufacturers. However, at regional and local level, these data are generally not available. In this context, the following problem arises: regional standards demand certifiers to determine the LRV of interior surfaces for the calculation of electric energy consumption by artificial lighting without proposing any tool or methodology for its calculation. Against this background, the main objective of the present work is to develop a simplified and low cost tool for the determination of LRV of inner surfaces materials. The methodology used is divided into three stages: (i) data (LRV, colour, type of material) collection, systematization and classification of materials; (ii) statistical analysis; (iii) development of the surface material card. Results show that a sample of the same material and colour may show variations in its LRV of up to 86%. This highlights the importance of the development of methods and tools, according to socio-technological contexts, for the determination of the LRV.
- 21 May 2020
- Published by SAGE Publications in Indoor and Built Environment
- Vol. 30 (7) , 970-984
Development of a simplified light reflectance value assessment tool for indoor surface coverings
Light reflectance value (LRV) of indoor surfaces impacts on electricity consumption for lighting. For this reason, inner surface reflectance is one of the parameters required by building energy efficiency codes and standards. In countries with advanced building energy certification processes, the LRV of coatings and paints is given by manufacturers. However, at regional and local level, these data are generally not available. In this context, the following problem arises: regional standards demand certifiers to determine the LRV of interior surfaces for the calculation of electric energy consumption by artificial lighting without proposing any tool or methodology for its calculation. Against this background, the main objective of the present work is to develop a simplified and low cost tool for the determination of LRV of inner surfaces materials. The methodology used is divided into three stages: (i) data (LRV, colour, type of material) collection, systematization and classification of materials; (ii) statistical analysis; (iii) development of the surface material card. Results show that a sample of the same material and colour may show variations in its LRV of up to 86%. This highlights the importance of the development of methods and tools, according to socio-technological contexts, for the determination of the LRV.