Francisco de Assis das Neves
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francisco de Assis das Neves has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Hélio Luiz Simonetti
IFMG
11 shared publications - Marcílio Sousa da Rocha Freitas
UFOP
4 shared publications - Márcio Maciel da Silva
Department of Civil Engineering, Federal University of Ouro Preto (UFOP), Ouro Preto 35400-000, Brazil
4 shared publications - Valério Silva Almeida
Department of Geotechnical and Structural Engineering, The School of Engineering of the University of São Paulo (EPUSP), São Paulo 05508-010, SP, Brazil
4 shared publications - Valerio Silva Almeida
Dept. of Geotechnical and Structural Engineering University of São Paulo (EPUSP) Av. Professor Melo Moraes 2373 05508-030 São Paulo/São Paulo Brasil
3 shared publications Valério S. Almeida
3 shared publications
Latest Publications
- Open Access
- 20 August 2026
- Published by Elsevier in SSRN Electronic Journal
Efficient Reliability-Based Design through a Deterministic Equivalence Strategy: An Approach for Multi-Material Topology Optimization using SESO and a MATLAB–ABAQUS Framework
Topology Optimization (TO) aims to determine the optimal material distribution within a structural domain to satisfy predefined performance criteria. In its multi-material formulation, TO combines different mechanical properties and costs, resulting in lighter, stiffer, and more economically efficient structures. This work presents a unified Multi-material Topology Optimization (MMTO) framework based on the Smoothing Evolutionary Structural Optimization (SESO) method, implemented in MATLAB and coupled with ABAQUS. The framework enables the analysis of complex structures under realistic boundary conditions. Uncertainties in loading, elastic modulus, and volume fraction are incorporated through the First-Order Reliability Method (FORM), considering normal and lognormal random variables and a reference reliability index of β=3.0. The main contribution is the identification and calibration of a compliance amplification coefficient (δ=1.77), establishing a deterministic–reliability equivalence. This equivalence enables reliable compliance to be estimated directly from deterministic optimization, with deviations below 5% relative to explicitly reliability-based solutions, as validated through Monte Carlo simulation. The framework was verified using benchmark problems and applied to a hydraulic transmission test-bench adapter support with four cast irons and a long-span bridge. The results demonstrate reductions in structural weight, compliance, material cost, and computational effort while maintaining target reliability.
- 20 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEfficient Reliability-Based Design through a Deterministic Equivalence Strategy: An Approach for Multi-Material Topology Optimization using SESO and a MATLAB–ABAQUS Framework
Topology Optimization (TO) aims to determine the optimal material distribution within a structural domain to satisfy predefined performance criteria. In its multi-material formulation, TO combines different mechanical properties and costs, resulting in lighter, stiffer, and more economically efficient structures. This work presents a unified Multi-material Topology Optimization (MMTO) framework based on the Smoothing Evolutionary Structural Optimization (SESO) method, implemented in MATLAB and coupled with ABAQUS. The framework enables the analysis of complex structures under realistic boundary conditions. Uncertainties in loading, elastic modulus, and volume fraction are incorporated through the First-Order Reliability Method (FORM), considering normal and lognormal random variables and a reference reliability index of β=3.0. The main contribution is the identification and calibration of a compliance amplification coefficient (δ=1.77), establishing a deterministic–reliability equivalence. This equivalence enables reliable compliance to be estimated directly from deterministic optimization, with deviations below 5% relative to explicitly reliability-based solutions, as validated through Monte Carlo simulation. The framework was verified using benchmark problems and applied to a hydraulic transmission test-bench adapter support with four cast irons and a long-span bridge. The results demonstrate reductions in structural weight, compliance, material cost, and computational effort while maintaining target reliability.
- Open Access
Multi-Objective Topological Optimization of 3D Multi-Material Structures Using the SESO Method with FORM
Topological optimization has established itself as an efficient tool for the design of highly complex structures and the rational use of materials, especially in problems involving multiple constraints and conflicting objectives. This work presents a new multi-material topological optimization approach based on the ESO smoothing method (SESO), formulated as a multi-objective optimization problem in a MATLAB R2021a environment. The multi-objective formulation simultaneously considers the minimization of the maximum von Mises equivalent stress (or minimum principal stress) and the maximum displacement, which are fundamental criteria for structural engineering design. The proposed methodology also incorporates a reliability analysis using the First-Order Reliability Method (FORM), modeling uncertainties associated with the applied force, volume fraction, and modulus of elasticity through normal and lognormal probability distributions, with a target reliability index of . The consistency of the reliability analysis was evaluated using Monte Carlo simulations, validating the reliability indices obtained via FORM. The approach was applied to two classical three-dimensional numerical examples: a cantilever beam under base and center loads and an MBB beam, considering two widely used engineering materials, steel and concrete. The results indicate improved multi-material distribution in the design domain and greater structural robustness against unfavorable loading planes, variations in the modulus of elasticity, and volume constraints imposed by FORM. Furthermore, the minimum yield stress of steel () and the compressive strength of concrete () were calibrated, representing the minimum material strengths required to resist the maximum von Mises stress in steel and the minimum principal stress () in concrete, ensuring the target reliability index is achieved. This method, thus, highlights the integration of SESO with multi-material, multi-objective, and reliability-based optimization as a consistent, robust, and practically relevant strategy with potential for future applications in structural engineering projects.Open AccessMulti-Objective Topological Optimization of 3D Multi-Material Structures Using the SESO Method with FORM
Topological optimization has established itself as an efficient tool for the design of highly complex structures and the rational use of materials, especially in problems involving multiple constraints and conflicting objectives. This work presents a new multi-material topological optimization approach based on the ESO smoothing method (SESO), formulated as a multi-objective optimization problem in a MATLAB R2021a environment. The multi-objective formulation simultaneously considers the minimization of the maximum von Mises equivalent stress (or minimum principal stress) and the maximum displacement, which are fundamental criteria for structural engineering design. The proposed methodology also incorporates a reliability analysis using the First-Order Reliability Method (FORM), modeling uncertainties associated with the applied force, volume fraction, and modulus of elasticity through normal and lognormal probability distributions, with a target reliability index of . The consistency of the reliability analysis was evaluated using Monte Carlo simulations, validating the reliability indices obtained via FORM. The approach was applied to two classical three-dimensional numerical examples: a cantilever beam under base and center loads and an MBB beam, considering two widely used engineering materials, steel and concrete. The results indicate improved multi-material distribution in the design domain and greater structural robustness against unfavorable loading planes, variations in the modulus of elasticity, and volume constraints imposed by FORM. Furthermore, the minimum yield stress of steel () and the compressive strength of concrete () were calibrated, representing the minimum material strengths required to resist the maximum von Mises stress in steel and the minimum principal stress () in concrete, ensuring the target reliability index is achieved. This method, thus, highlights the integration of SESO with multi-material, multi-objective, and reliability-based optimization as a consistent, robust, and practically relevant strategy with potential for future applications in structural engineering projects. - Open Access
- 29 January 2026
- Published by MDPI AG in Preprints.org
Multiobjective Topological Optimization of 3D Multi-Material Structures Using the SESO Method with FORM
Topological optimization has established as an efficient tool for the design of structures with high complexity and rational use of material, especially in problems involving multiple constraints and conflicting objectives. This work presents a new multi-material topology optimization approach based on the ESO smoothing method (SESO), formulated as a multi-objective optimization problem in a MATLAB environment. The multi-objective formulation simultaneously considers the minimization of the maximum von Mises equivalent stress and the maximum displacement, fundamental criteria for structural engineering design. The proposed methodology also incorporates a reliability analysis using the First-Order Reliability Method (FORM). The uncertainties associated with the applied force, volume fraction, and elastic modulus are modelled using normal and lognormal probability distributions, with a target reliability index of β_target=3.0. The consistency of the reliability analysis was evaluated through Monte Carlo simulations, used to validate the reliability indices obtained by the FORM method. The approach was applied to two classic three-dimensional numerical examples, a bottom-loaded cantilever beam and center-loaded cantilever beam, considering two widely used commercial materials, steel and concrete. The results indicated better multi-material distribution in the design domain and increased structural robustness against unfavorable loading planes, elastic modulus, and volume constraints imposed by the FORM formulation. Furthermore, the minimum yield stress is calibrated to incorporate the uncertainties inherent in the design process, establishing the minimum value required to achieve the target reliability index β. Thus, this method highlights the integration of the SESO method with multi-material, multi-objective, and reliability-based optimization as a consistent and robust strategy with potential for future applications in structural engineering design.
- 29 January 2026
- Published by MDPI AG in Preprints.org
Open AccessMultiobjective Topological Optimization of 3D Multi-Material Structures Using the SESO Method with FORM
Topological optimization has established as an efficient tool for the design of structures with high complexity and rational use of material, especially in problems involving multiple constraints and conflicting objectives. This work presents a new multi-material topology optimization approach based on the ESO smoothing method (SESO), formulated as a multi-objective optimization problem in a MATLAB environment. The multi-objective formulation simultaneously considers the minimization of the maximum von Mises equivalent stress and the maximum displacement, fundamental criteria for structural engineering design. The proposed methodology also incorporates a reliability analysis using the First-Order Reliability Method (FORM). The uncertainties associated with the applied force, volume fraction, and elastic modulus are modelled using normal and lognormal probability distributions, with a target reliability index of β_target=3.0. The consistency of the reliability analysis was evaluated through Monte Carlo simulations, used to validate the reliability indices obtained by the FORM method. The approach was applied to two classic three-dimensional numerical examples, a bottom-loaded cantilever beam and center-loaded cantilever beam, considering two widely used commercial materials, steel and concrete. The results indicated better multi-material distribution in the design domain and increased structural robustness against unfavorable loading planes, elastic modulus, and volume constraints imposed by the FORM formulation. Furthermore, the minimum yield stress is calibrated to incorporate the uncertainties inherent in the design process, establishing the minimum value required to achieve the target reliability index β. Thus, this method highlights the integration of the SESO method with multi-material, multi-objective, and reliability-based optimization as a consistent and robust strategy with potential for future applications in structural engineering design.
- Open Access
Three-Dimensional Multi-Material Topology Optimization: Applying a New Mapping-Based Projection Function
This paper presents an efficient and compact MATLAB code for 3D topology optimization of multi-materials. The multi-material problem using a mapping-based material interpolation function is adopted from previous work, in which each material is modeled in the same way, presenting a clear (clean) result of 0 and 1 for each material of the optimized structures, without gray elements, thus facilitating the manufacturing process. A new projection function, the sigmoid function, is adopted for the filtered design variables for each material in the domain. The proposed method improves computational efficiency, reducing computational costs by up to 36.7%, while achieving a 19.1% improvement in the objective function compared to the hyperbolic tangent function. A multi-material topology optimization solution with minimal compliance under volume constraints, including details of the optimization model, filtering, projection, and sensitivity analysis procedures, is presented. Numerical examples are also used to demonstrate the effectiveness of the code, and the influence of the position of the support on the optimized results is also proven. The complete MATLAB code for 3D elastic structures is presented as an example.
Open AccessThree-Dimensional Multi-Material Topology Optimization: Applying a New Mapping-Based Projection Function
This paper presents an efficient and compact MATLAB code for 3D topology optimization of multi-materials. The multi-material problem using a mapping-based material interpolation function is adopted from previous work, in which each material is modeled in the same way, presenting a clear (clean) result of 0 and 1 for each material of the optimized structures, without gray elements, thus facilitating the manufacturing process. A new projection function, the sigmoid function, is adopted for the filtered design variables for each material in the domain. The proposed method improves computational efficiency, reducing computational costs by up to 36.7%, while achieving a 19.1% improvement in the objective function compared to the hyperbolic tangent function. A multi-material topology optimization solution with minimal compliance under volume constraints, including details of the optimization model, filtering, projection, and sensitivity analysis procedures, is presented. Numerical examples are also used to demonstrate the effectiveness of the code, and the influence of the position of the support on the optimized results is also proven. The complete MATLAB code for 3D elastic structures is presented as an example.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in REM - International Engineering Journal
- Vol. 78 (3) , e240045
Design of steel and concrete composite beams according to NBR8800:2008 using pygad genetic algorithm and python implementation
In this article presents a programming routine that was developed based on the Python language for the design of non-slender web steel beams having mono symmetrical and doubly symmetrical sections, with welded and rolled profiles, and composite steel and concrete beams, in accordance with NBR8800:2008 for various loads. A Genetic Algorithm routine was incorporated into the code in order to perform discrete parametric optimization to obtain the best profile from an extensive list of commercial profiles for a given load. Important parameters, such as bending inertia, weight, elastic modulus, radius of gyration and simple bending were used in a weighting function, consisting of a linear combination of these parameters and weights. After determining the optimum weights of the weighting function via the PyGad genetic algorithm, the optimized profile was found to meet the constraints prescribed by the NBR8800:2008 standard. Between the serviceability limit states, vibration frequency checks were inserted into the optimization problem. Finally, following the optimization process, the designed and optimized elements will be checked for dynamic susceptibility through modal analysis. After checking the design constraints, according to NBR8800:2008, various analyses can be carried out with the selected beam, such as price, weight ratio, boundary condition, use and even a parallel study between various types of beams and profiles of different models. In this way, seven different beam models were made for comparison, showing that the program can be effective for future studies or even for day-to-day practice.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in REM - International Engineering Journal
- Vol. 78 (3) , e240045
Open AccessDesign of steel and concrete composite beams according to NBR8800:2008 using pygad genetic algorithm and python implementation
In this article presents a programming routine that was developed based on the Python language for the design of non-slender web steel beams having mono symmetrical and doubly symmetrical sections, with welded and rolled profiles, and composite steel and concrete beams, in accordance with NBR8800:2008 for various loads. A Genetic Algorithm routine was incorporated into the code in order to perform discrete parametric optimization to obtain the best profile from an extensive list of commercial profiles for a given load. Important parameters, such as bending inertia, weight, elastic modulus, radius of gyration and simple bending were used in a weighting function, consisting of a linear combination of these parameters and weights. After determining the optimum weights of the weighting function via the PyGad genetic algorithm, the optimized profile was found to meet the constraints prescribed by the NBR8800:2008 standard. Between the serviceability limit states, vibration frequency checks were inserted into the optimization problem. Finally, following the optimization process, the designed and optimized elements will be checked for dynamic susceptibility through modal analysis. After checking the design constraints, according to NBR8800:2008, various analyses can be carried out with the selected beam, such as price, weight ratio, boundary condition, use and even a parallel study between various types of beams and profiles of different models. In this way, seven different beam models were made for comparison, showing that the program can be effective for future studies or even for day-to-day practice.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Multi-material topology optimization of 2D structures using the SESO and SIMP method with reliability
Topology optimization is essential for the efficient distribution of structural form within the desired design domain, ensuring that structural elements are positioned to resist the requested forces and the specific boundary conditions for which they were designed. Therefore, the main objective of the article is the multimaterial topological optimization of a variety of two-dimensional structural problems, based on literature benchmarks, such as Michell structures and the MBB beam. These problems are approached considering a multi-material perspective, to distribute different materials throughout the structure, thus seeking their optimal solution. The methodology was generated based on the use of the finite element method for structure analysis and computing techniques were implemented for multi-material topology optimization (M.T.O.), Smoothing-ESO (SESO), and Solid Isotropic Material with Penalization (SIMP) via MATLAB. Furthermore, a reliability analysis is incorporated to deal with uncertainties, using Reliability-Based Topology Optimization (RBTO) with the First-Order Reliability Method (FORM), dealing with the random variables involved, such as geometry, modulus of elasticity, volume fraction, compliance, and loading, such as normal and lognormal probability distributions. The results obtained show a satisfactory convergence between the two topological optimization methods studied, thus highlighting the potential for applying these techniques to various structures as an effective tool in the search for economic efficiency in structural design.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessMulti-material topology optimization of 2D structures using the SESO and SIMP method with reliability
Topology optimization is essential for the efficient distribution of structural form within the desired design domain, ensuring that structural elements are positioned to resist the requested forces and the specific boundary conditions for which they were designed. Therefore, the main objective of the article is the multimaterial topological optimization of a variety of two-dimensional structural problems, based on literature benchmarks, such as Michell structures and the MBB beam. These problems are approached considering a multi-material perspective, to distribute different materials throughout the structure, thus seeking their optimal solution. The methodology was generated based on the use of the finite element method for structure analysis and computing techniques were implemented for multi-material topology optimization (M.T.O.), Smoothing-ESO (SESO), and Solid Isotropic Material with Penalization (SIMP) via MATLAB. Furthermore, a reliability analysis is incorporated to deal with uncertainties, using Reliability-Based Topology Optimization (RBTO) with the First-Order Reliability Method (FORM), dealing with the random variables involved, such as geometry, modulus of elasticity, volume fraction, compliance, and loading, such as normal and lognormal probability distributions. The results obtained show a satisfactory convergence between the two topological optimization methods studied, thus highlighting the potential for applying these techniques to various structures as an effective tool in the search for economic efficiency in structural design.
- Open Access
- 24 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (15) , 6465
BESO and SESO: Comparative Analysis of Spatial Structures Considering Self-Weight and Structural Reliability
A comparative analysis between Bidirectional Evolutionary Structural Optimization (BESO) and Smoothing-ESO (SESO), simultaneously considering Reliability-Based Topology Optimization (RBTO) and the structure’s self-weight in the case of three-dimensional elasticity, is presented in this study. Due to the important role of the existence of uncertainties in making the structural design more realistic, geometry, volumetric fraction, modulus of elasticity, compliance, and loading are considered random variables with normal probability distribution. When adopting the First Order Reliability Method (FORM), the failure probability is calculated based on the reliability index. Furthermore, considering the influence of self-weight in problems involving large structures in civil engineering, especially in the case of bridges, this makes the optimal configuration more reliable for design. A series of examples are covered to validate the methods presented, showing their efficiency and robustness.
- 24 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (15) , 6465
Open AccessBESO and SESO: Comparative Analysis of Spatial Structures Considering Self-Weight and Structural Reliability
A comparative analysis between Bidirectional Evolutionary Structural Optimization (BESO) and Smoothing-ESO (SESO), simultaneously considering Reliability-Based Topology Optimization (RBTO) and the structure’s self-weight in the case of three-dimensional elasticity, is presented in this study. Due to the important role of the existence of uncertainties in making the structural design more realistic, geometry, volumetric fraction, modulus of elasticity, compliance, and loading are considered random variables with normal probability distribution. When adopting the First Order Reliability Method (FORM), the failure probability is calculated based on the reliability index. Furthermore, considering the influence of self-weight in problems involving large structures in civil engineering, especially in the case of bridges, this makes the optimal configuration more reliable for design. A series of examples are covered to validate the methods presented, showing their efficiency and robustness.
- Open Access
- 24 June 2024
- Published by MDPI AG in Preprints.org
BESO and SESO: Comparative Analysis of Spatial Structures Considering Self-Weight and Structural Reliability
A comparative analysis between Bidirectional Evolutionary Structural Optimization (BESO) and Smoothing-ESO (SESO), simultaneously considering Reliability-Based Topology Optimization (RBTO) and the structure's self-weight in the case of three-dimensional elasticity, is presented in this study. Due to the important role of the existence of uncertainties in making the structural design more realistic, geometry, volumetric fraction, modulus of elasticity, compliance, and loading are considered random variables with normal probability distribution. When adopting the First Order Reliability Method (FORM), the failure probability is calculated based on the reliability index. Furthermore, considering the influence of self-weight in problems involving large structures in civil engineering, especially in the case of bridges, makes the optimal configuration more reliable for design. A series of examples are covered to validate the methods presented, showing their efficiency and robustness.
- 24 June 2024
- Published by MDPI AG in Preprints.org
Open AccessBESO and SESO: Comparative Analysis of Spatial Structures Considering Self-Weight and Structural Reliability
A comparative analysis between Bidirectional Evolutionary Structural Optimization (BESO) and Smoothing-ESO (SESO), simultaneously considering Reliability-Based Topology Optimization (RBTO) and the structure's self-weight in the case of three-dimensional elasticity, is presented in this study. Due to the important role of the existence of uncertainties in making the structural design more realistic, geometry, volumetric fraction, modulus of elasticity, compliance, and loading are considered random variables with normal probability distribution. When adopting the First Order Reliability Method (FORM), the failure probability is calculated based on the reliability index. Furthermore, considering the influence of self-weight in problems involving large structures in civil engineering, especially in the case of bridges, makes the optimal configuration more reliable for design. A series of examples are covered to validate the methods presented, showing their efficiency and robustness.
- Open Access
- 19 May 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (10) , 6215
3D Structural Topology Optimization Using ESO, SESO and SERA: Comparison and an Extension to Flexible Mechanisms
This article investigates the study of Topology Optimization (TO) in 3D elasticity problems to determine the optimal topology by applying the evolutionary methods of Smoothing Evolutionary Structural Optimization (SESO), Sequential Element Rejection and Admission (SERA), and Evolutionary Structural Optimization (ESO). These procedures were implemented in MATLAB code as an extension of Top3d implemented for SIMP by using the eight-node hexahedral finite element formulation in three-dimensional elastostatic structures. The approaches conducted in the present study are demonstrated with numerical examples involving the compliance minimization criterion. Further, a brief synthesis of flexible mechanisms was studied to emphasize the performance of complaint mechanisms measured in terms of two design specifications/functionalities: mechanical and geometrical advantages, which are the highlights of this article. To show the gains of the proposed methods, numerical results obtained are compared with Solid Isotropic Material with Penalization (SIMP) models.
- 19 May 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (10) , 6215
Open Access3D Structural Topology Optimization Using ESO, SESO and SERA: Comparison and an Extension to Flexible Mechanisms
This article investigates the study of Topology Optimization (TO) in 3D elasticity problems to determine the optimal topology by applying the evolutionary methods of Smoothing Evolutionary Structural Optimization (SESO), Sequential Element Rejection and Admission (SERA), and Evolutionary Structural Optimization (ESO). These procedures were implemented in MATLAB code as an extension of Top3d implemented for SIMP by using the eight-node hexahedral finite element formulation in three-dimensional elastostatic structures. The approaches conducted in the present study are demonstrated with numerical examples involving the compliance minimization criterion. Further, a brief synthesis of flexible mechanisms was studied to emphasize the performance of complaint mechanisms measured in terms of two design specifications/functionalities: mechanical and geometrical advantages, which are the highlights of this article. To show the gains of the proposed methods, numerical results obtained are compared with Solid Isotropic Material with Penalization (SIMP) models.
- Open Access
- 22 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (9) , 4220
Reliability-Based Topology Optimization: An Extension of the SESO and SERA Methods for Three-Dimensional Structures
This study takes an approach to reliability-based topology optimization (RBTO) for 3D structures by applying an expansion of smoothing evolutionary structural optimization (SESO) and sequential element rejection and admission (SERA) for three-dimensional optimization. In the search for the stable optimal solution, and a more reliable structure, we present a performance index with the ability to monitor the evolutionary optimization procedure and adopt the filtering scheme usually applied in solid isotropic material with penalization (SIMP). The limit state functions are the maximum displacement constraints imposed in the topology optimization procedure and a structure’s performance control; a comparative analysis of the deterministic topology optimization (DTO) with the RBTO models is also explored. The obtained results suggest the importance of using the RBTO concept in 3D structures as part of the design analysis process.
- 22 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (9) , 4220
Open AccessReliability-Based Topology Optimization: An Extension of the SESO and SERA Methods for Three-Dimensional Structures
This study takes an approach to reliability-based topology optimization (RBTO) for 3D structures by applying an expansion of smoothing evolutionary structural optimization (SESO) and sequential element rejection and admission (SERA) for three-dimensional optimization. In the search for the stable optimal solution, and a more reliable structure, we present a performance index with the ability to monitor the evolutionary optimization procedure and adopt the filtering scheme usually applied in solid isotropic material with penalization (SIMP). The limit state functions are the maximum displacement constraints imposed in the topology optimization procedure and a structure’s performance control; a comparative analysis of the deterministic topology optimization (DTO) with the RBTO models is also explored. The obtained results suggest the importance of using the RBTO concept in 3D structures as part of the design analysis process.