MFMarcílio Sousa da Rocha Freitas

Marcílio Sousa da Rocha Freitas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marcílio Sousa da Rocha Freitas has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Efficient Reliability-Based Design through a Deterministic Equivalence Strategy: An Approach for Multi-Material Topology Optimization using SESO and a MATLAB–ABAQUS Framework

    by Márcio Maciel da Silva, Francisco de Assis das Neves, Hélio Luiz Simonetti, Marcílio Freitas

    Topology Optimization (TO) aims to determine the optimal material distribution within a structural domain to satisfy predefined performance criteria. In its multi-material formulation, TO combines different mechanical properties and costs, resulting in lighter, stiffer, and more economically efficient structures. This work presents a unified Multi-material Topology Optimization (MMTO) framework based on the Smoothing Evolutionary Structural Optimization (SESO) method, implemented in MATLAB and coupled with ABAQUS. The framework enables the analysis of complex structures under realistic boundary conditions. Uncertainties in loading, elastic modulus, and volume fraction are incorporated through the First-Order Reliability Method (FORM), considering normal and lognormal random variables and a reference reliability index of β=3.0. The main contribution is the identification and calibration of a compliance amplification coefficient (δ=1.77), establishing a deterministic–reliability equivalence. This equivalence enables reliable compliance to be estimated directly from deterministic optimization, with deviations below 5% relative to explicitly reliability-based solutions, as validated through Monte Carlo simulation. The framework was verified using benchmark problems and applied to a hydraulic transmission test-bench adapter support with four cast irons and a long-span bridge. The results demonstrate reductions in structural weight, compliance, material cost, and computational effort while maintaining target reliability.

  • MÉTODO DA RESISTÊNCIA DIRETA EM VIGAS COMPOSTAS DE PERFIS FORMADOS A FRIO: ANÁLISE DE CONFIABILIDADE EM DIFERENTES COMBINAÇÕES NORMATIVAS DE AÇÕES

    by Marcelo Borges Pereira, André Luis Riqueira Brandão, Marcílio Sousa da Rocha Freitas

    Nas estruturas de aço formado a frio, a aplicação de vigas compostas (built-up) tem aumentado, sobretudo as de seções U. A crescente demanda por soluções econômicas levou ao desenvolvimento de barras compostas com maior capacidade de carga. Este artigo propõe a avaliação da confiabilidade de barras compostas dimensionadas pelo Método da Resistência Direta (MRD). Foi estabelecido um banco de dados abrangente, incluindo seções abertas e fechadas. Utilizando esse banco de dados, foi realizada uma análise estatística da variável “erro do modelo” e, posteriormente, foram conduzidas análises do índice de confiabilidade (beta) para avaliar os níveis de segurança do MRD. A abordagem considerou um modelo em faixas finitas, que enfatiza a ação composta dos elementos que constituem a seção. Na análise de confiabilidade foram aplicadas as combinações de ações estabelecidas pelas normas AISI S100 (AISI, 2016) e NBR 14762 (ABNT, 2010). Além disso, foi realizada uma calibração dos coeficientes de ponderação da resistência, gama Ø(AISI, 2016) e γ (ABNT, 2010), para cada índice-alvo de confiabilidade normativo. Os resultados evidenciaram a necessidade de ajustes nos coeficientes de ponderação da resistência atualmente adotados. Com base na análise realizada, valores mais apropriados seriam aproximadamente: ØLRFD ≈ 0,85, ØLSD ≈ 0,70 e gama_NBR ≈ 1,25. Esses ajustes podem contribuir para um dimensionamento mais preciso e alinhado com as exigências de segurança e desempenho estrutural.

  • Open Access

    Steel Cylindrical Shells Under External Pressure: Behaviour and Direct Strength Design

    by Rodrigo S. Manera, Cilmar Basaglia, Dinar Camotim, Victor Faria, Marcílio Freitas

    This paper presents the latest results of an ongoing numerical investigation on the structural behaviour and direct strength design of circular cylindrical steel shells (CCSS) subjected to uniform external (hydrostatic) pressure – both simply supported and fixed-ended shells are dealt with. After (i) addressing the shell linear buckling (bifurcation) behaviour, by means of validated numerical models based on Generalised Beam Theory (GBT) and the Shell Finite Element method, this work investigates the elastic and elastic-plastic post-buckling behaviour of the cylindrical shells under consideration. Then, the attention is devoted to the performance of a comprehensive parametric study, aimed at gathering fairly extensive numerical failure pressure data, concerning simply supported and fixed-ended steel cylindrical shells with flat end surfaces, intended to be subsequently used in the development and calibration of a direct design curve that is shown to be capable of predicting them efficiently (safely, accurately and reliably) – the reliability analysis is performed in accordance with the Eurocode (European Specification) structural design basis and adopting the limit state design philosophy.

  • Open Access

    Reliability of cold-formed steel frames for the limit state of excessive displacements

    by Victor Faria, Marcílio Freitas, Danilo Mapa

    The use of the finite element method in advanced structural analysis has enabled structural engineers to analyze and understand the behavior of structures as a whole, providing an efficient alternative to overcome deficiencies in member-based analysis and design procedures. The use of slender elements in structures, particularly cold-formed steel members, underscores the need to pay attention to excessive displacements and the accuracy of formulations in monitoring them. Finite element formulations are widely use in design practice for serviceability checks of these structures on attendance of normative displacement limits. Cold-formed steel design codes backgrounds have some reliability requirements, that need to be achieved, either for ultimate or serviceability limit states, based on failure or on exceedance consequences. This paper investigates the reliability of cold-formed steel frames designed for the serviceability limit state of excessive displacements using a first-order reliability method. An advanced beam-column finite element was employed to compare the actual displacement of the frames to the normative maximum displacement in the limit state equation. The statistical parameters of the random variables were studied and defined, with special attention given to live loads. Results indicated that some prescribed design scenarios for warehouse portal frames are not fully aligned with the reliability background of US and European design standards. An application to pallet-rack design is also presented, where the correlation of product loads was shown to significantly influence frame reliability. Additional conclusions regarding the alignment of current design provisions with established reliability targets are discussed.

  • Open Access

    Multi-Objective Topological Optimization of 3D Multi-Material Structures Using the SESO Method with FORM

    by Márcio Maciel da Silva, Hélio Luiz Simonetti, Francisco de Assis das Neves, Marcílio Sousa da Rocha Freitas

    Topological optimization has established itself as an efficient tool for the design of highly complex structures and the rational use of materials, especially in problems involving multiple constraints and conflicting objectives. This work presents a new multi-material topological optimization approach based on the ESO smoothing method (SESO), formulated as a multi-objective optimization problem in a MATLAB R2021a environment. The multi-objective formulation simultaneously considers the minimization of the maximum von Mises equivalent stress (or minimum principal stress) and the maximum displacement, which are fundamental criteria for structural engineering design. The proposed methodology also incorporates a reliability analysis using the First-Order Reliability Method (FORM), modeling uncertainties associated with the applied force, volume fraction, and modulus of elasticity through normal and lognormal probability distributions, with a target reliability index of βtarget=3.0. The consistency of the reliability analysis was evaluated using Monte Carlo simulations, validating the reliability indices obtained via FORM. The approach was applied to two classical three-dimensional numerical examples: a cantilever beam under base and center loads and an MBB beam, considering two widely used engineering materials, steel and concrete. The results indicate improved multi-material distribution in the design domain and greater structural robustness against unfavorable loading planes, variations in the modulus of elasticity, and volume constraints imposed by FORM. Furthermore, the minimum yield stress of steel (σymin) and the compressive strength of concrete (fckmin) were calibrated, representing the minimum material strengths required to resist the maximum von Mises stress in steel and the minimum principal stress (σ3) in concrete, ensuring the target reliability index is achieved. This method, thus, highlights the integration of SESO with multi-material, multi-objective, and reliability-based optimization as a consistent, robust, and practically relevant strategy with potential for future applications in structural engineering projects.


  • Open Access

    Multiobjective Topological Optimization of 3D Multi-Material Structures Using the SESO Method with FORM

    by Marcio Maciel da Silva, Hélio Luiz Simonetti, Francisco de Assis das Neves, Marcílio Sousa da Rocha Freitas

    Topological optimization has established as an efficient tool for the design of structures with high complexity and rational use of material, especially in problems involving multiple constraints and conflicting objectives. This work presents a new multi-material topology optimization approach based on the ESO smoothing method (SESO), formulated as a multi-objective optimization problem in a MATLAB environment. The multi-objective formulation simultaneously considers the minimization of the maximum von Mises equivalent stress and the maximum displacement, fundamental criteria for structural engineering design. The proposed methodology also incorporates a reliability analysis using the First-Order Reliability Method (FORM). The uncertainties associated with the applied force, volume fraction, and elastic modulus are modelled using normal and lognormal probability distributions, with a target reliability index of β_target=3.0. The consistency of the reliability analysis was evaluated through Monte Carlo simulations, used to validate the reliability indices obtained by the FORM method. The approach was applied to two classic three-dimensional numerical examples, a bottom-loaded cantilever beam and center-loaded cantilever beam, considering two widely used commercial materials, steel and concrete. The results indicated better multi-material distribution in the design domain and increased structural robustness against unfavorable loading planes, elastic modulus, and volume constraints imposed by the FORM formulation. Furthermore, the minimum yield stress is calibrated to incorporate the uncertainties inherent in the design process, establishing the minimum value required to achieve the target reliability index β. Thus, this method highlights the integration of the SESO method with multi-material, multi-objective, and reliability-based optimization as a consistent and robust strategy with potential for future applications in structural engineering design.


  • Open Access

    Reliability of built-up cold-formed steel beams designed by the direct strength method

    by Marcelo Borges Pereira, André Luís Riqueira Brandão, Marcilio Sousa da Rocha Freitas

    Built-up cold-formed steel (CFS) beams are composed of two or more sections that are joined together with welds, bolts or screws. Although PFF composite bars are commonly used in bending applications, the structural design of these sections requires further investigation. This study proposed a critical review of research related to the structural behavior and designing methodology of these elements. A review of published articles, encompassing experimental studies and numerical simulations of these elements, was conducted. The safety of built-up beams subjected to bending, designed according to the Direct Strength Method (AISI S100, 2016; NBR 14762, 2010), was evaluated and for the statistical study of the model error variable, beam test results obtained from literature were compared to the resistant capacities obtained by the direct strength method (DSM). The structural safety verification of built-up beams was performed using first-order reliability methods to assess the safety level for different load combinations. A calibration procedure for NBR 14762 (2010) was also presented, obtaining the resistance factor for a target reliability index.


  • Open Access

    System reliability analysis of cold-formed steel structures for serviceability limit states

    by Victor Antônio Moreira de Faria, Marcílio Sousa da Rocha Freitas, Danilo Luiz Santana Mapa

    The adoption of numerical analyses in structural design practice has ensured greater control over the actual behavior of structures. Design-by-analysis approaches deviate from traditional methods by directly considering the load-bearing capacity of the entire system rather than individual element checks. These approaches can even incorporate inherent nonlinearities into the analysis, such as second-order effects, material inelasticity, geometric imperfections, and semi-rigid connections. These advanced analysis models may produce results closer to the actual behavior of the structure in service, enabling the safe utilization of lighter structural systems. In this context, the evaluation of serviceability limit states becomes relevant, particularly for cold-formed steel structures, which are typically assembled using slender elements. This paper presents the application of a reliability-based procedure to assess the compliance of cold-formed steel frames with serviceability limit state criteria for excessive lateral displacement. Considering two groups of cold-formed steel structures based on their functions: single-story building frames and industrial storage rack frames, the lateral drift limits are extracted from the AISI S100, ASCE/SEI 7, ANSI MH 16.1, and Brazilian NBR 14762 and NBR 15524-2 standards, along with the target reliability indices for the corresponding limit state. The subsequent step involves evaluating system reliability, considering typical load cases for these structures (dead and wind loads for single-story frames and dead and product loads for racks) selected from the mentioned specifications, accounting for the uncertainties in loads and in the material and geometric parameters of the steel members. For this purpose, a MATLAB reliability framework is presented, coupling the First Order Reliability Method (FORM) to the MASTAN2 finite-element package, in order to apply the structural analysis results in each evaluation of the limit state functions. Conclusions regarding reliability indices and the potential adequacy of resistance factors are presented.

  • Open Access

    Multi-material topology optimization of 2D structures using the SESO and SIMP method with reliability

    by Márcio Maciel da Silva, Francisco de Assis das Neves, Hélio Luiz Simonetti, Marcilio Sousa da Rocha Freitas

    Topology optimization is essential for the efficient distribution of structural form within the desired design domain, ensuring that structural elements are positioned to resist the requested forces and the specific boundary conditions for which they were designed. Therefore, the main objective of the article is the multimaterial topological optimization of a variety of two-dimensional structural problems, based on literature benchmarks, such as Michell structures and the MBB beam. These problems are approached considering a multi-material perspective, to distribute different materials throughout the structure, thus seeking their optimal solution. The methodology was generated based on the use of the finite element method for structure analysis and computing techniques were implemented for multi-material topology optimization (M.T.O.), Smoothing-ESO (SESO), and Solid Isotropic Material with Penalization (SIMP) via MATLAB. Furthermore, a reliability analysis is incorporated to deal with uncertainties, using Reliability-Based Topology Optimization (RBTO) with the First-Order Reliability Method (FORM), dealing with the random variables involved, such as geometry, modulus of elasticity, volume fraction, compliance, and loading, such as normal and lognormal probability distributions. The results obtained show a satisfactory convergence between the two topological optimization methods studied, thus highlighting the potential for applying these techniques to various structures as an effective tool in the search for economic efficiency in structural design.

  • Open Access

    Reliability analysis in the design of cold-formed steel built-up I sections by modified Direct Strength Method

    by Júlia Nogueira Mauad, André L. R. Brandão, Marcilio Sousa da Rocha Freitas

    Cold-formed steel (CFS) framing is an economical and efficient structural solution, as it provides high strength and low self-weight. Built-up sections, formed by combining two or more CFS members, can reduce instabilities and obtain more versatility. An approach adopted in standards from several countries for the design of CFS bars is the direct strength method (DSM), which allows calculation of axial force from elastic buckling loads, considering global, local and distortional buckling modes. Currently, there are proposals to modify the DSM for the design of built-up sections, aiming to better fit experimental and numerical data. This study aimed to investigate these modifications of original DSM formulae by applying them to a database of experimental compression tests on built-up “I”, or back-to-back, sections. Using the database results, it was possible to calculate the professional factor (P), obtained from the ratio between experimental and theoretical results. To obtain reliability indices (β) related to theoretical methods, the professional factor was evaluated as a continuous random variable, according to data grouping by section type, failure type, and all one. The reliability index (β) was obtained using FOSM, FORM and Monte Carlo Simulation (MCS) reliability methods for load combinations from AISI S100 (LRFD and LSD) and NBR 14762.