GMGabriela Lima Menegaz

Gabriela Lima Menegaz

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gabriela Lima Menegaz has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of TIG dental welding applied to Ti-6Al-4V alloys with different diameters: Analysis by Ultimate Tensile Strength, Vickers Hardness, and Finite Element Method

    by Morgana Guilherme de Castro Silverio, Gabriela Lima Menegaz, Cleudmar Amaral Araújo, Washington Martins da Silva Júnior, Paulo Cézar Simamoto Júnior

    There is limited information in literature regarding the accomplishment of Ti-6Al-4V TIG joints welded in prefabricated bars applied to dentistry. Evaluate the ultimate tensile strength and Vickers hardness of Ti-6Al-4V alloy subjected to TIG (Tungsten Inert Gas) welding technique in different diameters. Material and methods: Forty-five specimens were prepared and divided into 5 groups: control group (CG) (n=5), with intact bars in a diameter of 3.0mm, and groups TIG2.5, TIG3, TIG4, TIG5 (n=10) with diameters of 2.5, 3, 4 and 5 mm respectively, welded with TIG in a pulse of 10(ms) and in a depth of 3(A). The specimens were tested by both radiographic inspection and penetrating liquids. After that, they were tested by ultimate tensile strength (UTS) and the elongation percentage (EP) was obtained. Images from fractured samples were taken and the welded areas percentage (WAP) was calculated. Random images were also taken by scanning electron microscope (SEM). Vickers hardness was obtained for base metal (BM), Heat affected zone (HAZ) and Welded zone (WZ). Finite element models were constructed. One-way Anova, Dunnet and Tukey tests (α=.05) were used for statistical analysis of UTS, WAP and EP for different groups and for differences in regions (BM, HAZ and WZ). Finite element models were developed in a workbench environment with boundary conditions simulating a tensile test. The majority of the specimens showed internal voids on radiographic inspection, but porosities or groves were not observed on their surface on penetrant liquid test. Most of the samples fractured in the welded area. The 1-way ANOVA showed significant differences among the groups for UTS, WAP and EP values (P<.001). The Dunnett test showed that TIG3, TIG4 and TIG5 groups had lower UTS values than those of the CG, but TIG2.5 group had no statistical difference in relation to CG. The 1-way ANOVA showed significant differences among the regions (P<.001) for Vickers hardness. Under the experimental conditions described, the diameter of 2.5 seems to be the best option for joining prefabricated rods in this kind of union and in this regulation of the machine.


  • Use of the electromechanical impedance method in the detection of inclusions: application to mammary tumors

    by Gabriela Lima Menegaz, Karina Mayumi Tsuruta, Roberto Mendes Finzi Neto, Valder Steffen, Cleudmar Amaral Araujo, Gilmar Guimarães

    Breast cancer is a public health problem and has the highest incidence and mortality in the female population worldwide. Early detection of breast cancer is essential for reducing the morbidity and mortality associated with this disease. Some methods for detecting breast tumors include ultrasonography, magnetic resonance imaging, positron emission tomography, tomosynthesis, and mammography, which are recommended as screening techniques. Each method has its advantages and disadvantages, such as discomfort to the patient during examination, possible reactions to the contrast agent, radiation emission, operator dependence for the analysis of results, difficulty of detection in dense tissues, lack of access for people with disabilities or low mobility, high cost, and radioactive waste production. The main objective of this work is to apply the electromechanical impedance method to the detection of inclusions so that it can be used as an alternative to existing techniques for the detection of breast tumors. The application of the electromechanical impedance method using piezoelectric transducers, acting simultaneously as sensors and actuators, coupled to the analyzed structure allows the monitoring of mass, rigidity, and/or damping variations, and consequent detection of inclusions. The detection of inclusions is possible owing to damage metrics, which are statistical parameters capable of numerically representing the difference between two measurements before and after damage. In this work, silicone samples and phantom breast models were analyzed. In addition, it was observed that external heating imposed on the models and the presence of heat generation in the inclusions aided detection. This work presents important contributions in the analysis of structural behavior, expanding the applications of damage detection techniques to hyperplastic materials.