Kelly R. Wade
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Kelly R. Wade has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
Peter A. Robertson
Department of Orthopaedic Surgery, Auckland City Hospital, Auckland, New Zealand
11 shared publications- Ashvin Thambyah
Experimental Tissue Mechanics Laboratory, Department of Chemical and Materials Engineering, University of Auckland, Auckland, New Zealand
8 shared publications Neil D. Broom
Experimental Tissue Mechanics Laboratory, Department of Chemical and Materials Engineering, University of Auckland, Auckland, New Zealand
7 shared publications- Neil David Broom
Experimental Tissue Mechanics Laboratory, Department of Chemical and Materials Engineering, University of Auckland, Auckland, New Zealand
6 shared publications - Meredith L. Schollum
Tissue Mechanics Laboratory, Department of Chemical and Materials Engineering, University of Auckland, Auckland, New Zealand.
4 shared publications - Aaron J. Fields
Department of Orthopaedic Surgery, University of California, San Francisco, USA
2 shared publications
Latest Publications
- Open Access
- 1 July 2026
- Published by Springer Nature in Cellulose
- Vol. 33 (11) , 6479-6496
Characterising fibre alignment in moulded fibre materials across X, Y, and Z axes
Moulded fibre is emerging as a sustainable alternative to single-use plastic items, commonly used for food and non-food packaging. Yet its mechanical properties are often inferior to oriented paper products, due to the limited fibre alignment during forming. This study introduces a method for characterising fibre orientation (FO) within moulded fibre products, enabling analysis of pulp flow patterns and turbulence during the production of moulded fibre items. The fibre alignment is characterised by sheet splitting the samples using an automated sheet splitter, and high-resolution scans of the split layers were analysed using MATLAB Structure Tensor analysis to determine the fibre orientation (FO) in the X and Y directions. The MATLAB analyses provided FO distribution across layers, in the Z-direction and offered insights into X and Y directional alignment. Outputs included visual heatmaps using a block approach and quantitative metrics. This approach enables efficient, detailed FO characterisation throughout the layers of a product, allowing for further improvement of moulded fibre properties. Validation results showed accurate and sensitive results. This method introduces opportunities to understand and control fibre alignment, a key step toward improving the strength properties of moulded fibre packaging.
- 1 July 2026
- Published by Springer Nature in Cellulose
- Vol. 33 (11) , 6479-6496
Open AccessCharacterising fibre alignment in moulded fibre materials across X, Y, and Z axes
Moulded fibre is emerging as a sustainable alternative to single-use plastic items, commonly used for food and non-food packaging. Yet its mechanical properties are often inferior to oriented paper products, due to the limited fibre alignment during forming. This study introduces a method for characterising fibre orientation (FO) within moulded fibre products, enabling analysis of pulp flow patterns and turbulence during the production of moulded fibre items. The fibre alignment is characterised by sheet splitting the samples using an automated sheet splitter, and high-resolution scans of the split layers were analysed using MATLAB Structure Tensor analysis to determine the fibre orientation (FO) in the X and Y directions. The MATLAB analyses provided FO distribution across layers, in the Z-direction and offered insights into X and Y directional alignment. Outputs included visual heatmaps using a block approach and quantitative metrics. This approach enables efficient, detailed FO characterisation throughout the layers of a product, allowing for further improvement of moulded fibre properties. Validation results showed accurate and sensitive results. This method introduces opportunities to understand and control fibre alignment, a key step toward improving the strength properties of moulded fibre packaging.
- 20 March 2026
- Published by Elsevier
Contributors
- 20 March 2026
- Published by Elsevier
- p. 147-165
Vertebral endplates
- 1 November 2023
- Published by BioResources in BioResources
- Vol. 19 (1) , 1728-1743
Sustainable paper-based packaging from hemp hurd fiber: A potential material for thermoformed molded fiber packaging
Hemp hurd fiber, a low-value waste stream from the hemp industry, has potential downstream applications as an alternative to non-renewable plastics for single-use food service ware and packaging applications. Packaging paper substrates made from chemically pulped hemp hurd, mixed in varying ratios with bleached thermomechanical radiata pine pulp were developed and tested. Handsheets were characterized using several mechanical property tests including tensile strength, tearing resistance, burst strength, short-span compression, ring crush, together with Gurley air resistance, contact angle, and Cobb60 tests. Generally, addition of hemp hurd fibers significantly improved handsheet mechanical properties. Hot-pressing of the handsheets so as to approximate molded fiber thermoforming further enhanced their performance, with pure hemp hurd handsheets having the highest mechanical properties and barrier performance. A prototype was successfully thermoformed from hemp fiber, demonstrating overall feasibility of this fibre source for molded fibre objects.
- 1 November 2023
- Published by BioResources in BioResources
- Vol. 19 (1) , 1728-1743
Sustainable paper-based packaging from hemp hurd fiber: A potential material for thermoformed molded fiber packaging
Hemp hurd fiber, a low-value waste stream from the hemp industry, has potential downstream applications as an alternative to non-renewable plastics for single-use food service ware and packaging applications. Packaging paper substrates made from chemically pulped hemp hurd, mixed in varying ratios with bleached thermomechanical radiata pine pulp were developed and tested. Handsheets were characterized using several mechanical property tests including tensile strength, tearing resistance, burst strength, short-span compression, ring crush, together with Gurley air resistance, contact angle, and Cobb60 tests. Generally, addition of hemp hurd fibers significantly improved handsheet mechanical properties. Hot-pressing of the handsheets so as to approximate molded fiber thermoforming further enhanced their performance, with pure hemp hurd handsheets having the highest mechanical properties and barrier performance. A prototype was successfully thermoformed from hemp fiber, demonstrating overall feasibility of this fibre source for molded fibre objects.
- Open Access
- 23 September 2023
- Published by Springer Nature in Journal of Materials Science
- Vol. 58 (36) , 14411-14425
Does flute angle influence box performance?
In the production of boxes, it is customary to align the flutes vertically, corresponding to a 0° flute angle. This configuration is widely believed to yield optimal compressive strength, despite existing evidence from corrugated flute boards and boxes that challenge this assumption. The present study investigates the hypothesis that non-vertical flute angles do not significantly compromise box compression strength and may potentially offer enhancements in other performance characteristics. Regular slotted container boxes (385 × 238 × 300 mm) constructed from single wall C-flute board were used in this study. Ten flute angles were selected for box level testing: 0°, 5°, 7.5°, 10°, 12.5°, 15°, 20°, 30°, 45° and 60°. Samples of converted board were subjected to edge crush testing (ECT) following TAPPI T-811 and four-point-bending following TAPPI T-820. Box crush testing (BCT) followed NZS 1301.800 2006 (New Zealand Standard). Component testing results were consistent with previous studies. Outcomes showed a general linear reduction in ECT with increasing flute angle, and nonlinear relationships between flute angle and bending force and stiffness. At the box level, peak load did not decline significantly between 0° and 45°, however 60° flute angles had significantly lower peak loads (α = 0.05). At certain angles, notably 10° and 30°, less variation in peak load was observed. BCT force and stiffness of the box significantly improved in terms of median and variation at 10° and 30°. Therefore, a flute angle of less than 45° does not significantly reduce compression strength.
- 23 September 2023
- Published by Springer Nature in Journal of Materials Science
- Vol. 58 (36) , 14411-14425
Open AccessDoes flute angle influence box performance?
In the production of boxes, it is customary to align the flutes vertically, corresponding to a 0° flute angle. This configuration is widely believed to yield optimal compressive strength, despite existing evidence from corrugated flute boards and boxes that challenge this assumption. The present study investigates the hypothesis that non-vertical flute angles do not significantly compromise box compression strength and may potentially offer enhancements in other performance characteristics. Regular slotted container boxes (385 × 238 × 300 mm) constructed from single wall C-flute board were used in this study. Ten flute angles were selected for box level testing: 0°, 5°, 7.5°, 10°, 12.5°, 15°, 20°, 30°, 45° and 60°. Samples of converted board were subjected to edge crush testing (ECT) following TAPPI T-811 and four-point-bending following TAPPI T-820. Box crush testing (BCT) followed NZS 1301.800 2006 (New Zealand Standard). Component testing results were consistent with previous studies. Outcomes showed a general linear reduction in ECT with increasing flute angle, and nonlinear relationships between flute angle and bending force and stiffness. At the box level, peak load did not decline significantly between 0° and 45°, however 60° flute angles had significantly lower peak loads (α = 0.05). At certain angles, notably 10° and 30°, less variation in peak load was observed. BCT force and stiffness of the box significantly improved in terms of median and variation at 10° and 30°. Therefore, a flute angle of less than 45° does not significantly reduce compression strength.
- Open Access
- 16 February 2022
- Published by Springer Nature in European Spine Journal
- Vol. 31 (6) , 1487-1500
How annulus defects can act as initiation sites for herniation
Purpose: Both posture and loading rate are key factors in the herniation process and can determine the mechanism of disc failure. The aim of this study was to test the hypothesis that disruption visible with HR-MRI post-testing corresponds with microstructural features and further elucidate the mechanism by which this disruption weakens the disc. This will enable us to gain new insights into the herniation process. Methods: Thirty ovine lumbar spinal segments were subjected to combinations of four loading conditions (0–12° flexion, 0–9° lateral bending, 0–4° axial rotation, 0–1500 N axial compression) for 1000 loading cycles at 2 Hz in a dynamic disc loading simulator. The discs were scanned in an ultra-high field MRI (11.7 T) then examined using brightfield microscopy to examine their microstructure. Results: Four discs herniated and seven discs suffered nucleus displacement. These discs contained pre-existing defects in the central posterior annulus. Generally, following testing discs contained more posterior annulus disruption, Microstructural investigation revealed there was clear correspondence between HR-MRI and microstructural observations, and that the mid-outer annular-endplate junction had failed in all discs examined in this study. Conclusions: While all discs suffered outer annulus damage, only the discs containing pre-existing defects herniated. These pre-existing defects weakened the inner and mid annulus, allowing herniation to occur once the mid and outer annular wall was compromised. We propose this can occur during the degenerative cascade.
- 16 February 2022
- Published by Springer Nature in European Spine Journal
- Vol. 31 (6) , 1487-1500
Open AccessHow annulus defects can act as initiation sites for herniation
Purpose: Both posture and loading rate are key factors in the herniation process and can determine the mechanism of disc failure. The aim of this study was to test the hypothesis that disruption visible with HR-MRI post-testing corresponds with microstructural features and further elucidate the mechanism by which this disruption weakens the disc. This will enable us to gain new insights into the herniation process. Methods: Thirty ovine lumbar spinal segments were subjected to combinations of four loading conditions (0–12° flexion, 0–9° lateral bending, 0–4° axial rotation, 0–1500 N axial compression) for 1000 loading cycles at 2 Hz in a dynamic disc loading simulator. The discs were scanned in an ultra-high field MRI (11.7 T) then examined using brightfield microscopy to examine their microstructure. Results: Four discs herniated and seven discs suffered nucleus displacement. These discs contained pre-existing defects in the central posterior annulus. Generally, following testing discs contained more posterior annulus disruption, Microstructural investigation revealed there was clear correspondence between HR-MRI and microstructural observations, and that the mid-outer annular-endplate junction had failed in all discs examined in this study. Conclusions: While all discs suffered outer annulus damage, only the discs containing pre-existing defects herniated. These pre-existing defects weakened the inner and mid annulus, allowing herniation to occur once the mid and outer annular wall was compromised. We propose this can occur during the degenerative cascade.
- 22 January 2019
- Published by Wiley in Packaging Technology and Science
- Vol. 32 (3) , 133-141
Digital image correlation analysis of vertical strain for corrugated fiberboard box panel in compression
This work was aimed at examining the overall contributions to displacement of panels of compressed boxes, such as panel compression strain and flap and crease displacements. 3D digital image correlation (DIC) was used to analyse motion of side panels of corrugated fiberboard regular slotted containers. The vertical displacement and the vertical component of strain of the panel face during box compression test were examined. Measuring displacements of the whole compressed box with DIC enables measurement of the in‐plane compression of a panel in isolation from the horizontal fold or crease zone displacement, without having to test tube sections of the box to infer or extract the in‐plane panel compression behaviour. Detailed study of two box designs in three representative test cases was presented, which in future could be extended to other box designs. At peak load, the in‐plane compression of the panels, calculated from the average vertical component of the strain along the right edge of the long panel of the box, was 3% to 6% of total crosshead displacement for the test cases. At peak load, the portion of the box compression associated with bottom box flaps or crease zone crushing was 48% to 59% of total crosshead displacement for the different cases. The analysis showed that the majority of the vertical displacement of the box occurred in the top and bottom creased folds and that these folds are responsible for the low apparent in‐plane stiffness of a box.
- 22 January 2019
- Published by Wiley in Packaging Technology and Science
- Vol. 32 (3) , 133-141
Digital image correlation analysis of vertical strain for corrugated fiberboard box panel in compression
This work was aimed at examining the overall contributions to displacement of panels of compressed boxes, such as panel compression strain and flap and crease displacements. 3D digital image correlation (DIC) was used to analyse motion of side panels of corrugated fiberboard regular slotted containers. The vertical displacement and the vertical component of strain of the panel face during box compression test were examined. Measuring displacements of the whole compressed box with DIC enables measurement of the in‐plane compression of a panel in isolation from the horizontal fold or crease zone displacement, without having to test tube sections of the box to infer or extract the in‐plane panel compression behaviour. Detailed study of two box designs in three representative test cases was presented, which in future could be extended to other box designs. At peak load, the in‐plane compression of the panels, calculated from the average vertical component of the strain along the right edge of the long panel of the box, was 3% to 6% of total crosshead displacement for the test cases. At peak load, the portion of the box compression associated with bottom box flaps or crease zone crushing was 48% to 59% of total crosshead displacement for the different cases. The analysis showed that the majority of the vertical displacement of the box occurred in the top and bottom creased folds and that these folds are responsible for the low apparent in‐plane stiffness of a box.
- 1 February 2018
- Published by Wolters Kluwer Health in Spine
- Vol. 43 (3) , E132-E142
A Microstructural Investigation of Disc Disruption Induced by Low Frequency Cyclic Loading
Study Design.: Microstructural investigation of low frequency cyclic loading and flexing of the lumbar disc. Objective.: To explore micro-level structural damage in motion segments subjected to low frequency repetitive loading and flexing at sub-acute loads. Summary of Background Data.: Cumulative exposure to mechanical load has been implicated in low back pain and injury. The mechanical pathways by which cyclic loading physically affects spine tissues remain unclear, in part due to the absence of high quality microstructural evidence. Methods.: The study utilized seven intact ovine lumbar spines and from each spine one motion segment was used as a control, two others were cyclically loaded. Ten motion segments were subjected to 5000 cycles at 0.5 Hz with a peak load corresponding to ∼30% of that required to achieve failure. An additional small group of segments subjected to 10,000 or 30,000 cycles was similarly analyzed. Following chemical fixation and decalcification samples were cryosectioned along one of the oblique fiber angles and imaged in their fully hydrated state using differential interference contrast optical microscopy. Structural damage obtained from the images was organized into an algebraic shell for analysis. Results.: At 5000 cycles the disc damage was limited to inner wall distortions, evidence of stress concentrations at bridging-lamellae attachments, and small delaminations. The high-cycle discs tested exhibited significant mid-wall damage. There was no evidence of nuclear material being displaced. Conclusion.: At this low frequency and without the application of sustained loading or a more severe loading regime, or maintaining a constant flexion with repetitive loading, it seems unlikely that actual nuclear migration occurs. It is possible that the inner-annular damage shown in the low dose group could disrupt pathways for nutrient diffusion leading to earlier cell death and matrix degradation, thus contributing to a cascade of degeneration. Level of Evidence: N/A
- 1 February 2018
- Published by Wolters Kluwer Health in Spine
- Vol. 43 (3) , E132-E142
A Microstructural Investigation of Disc Disruption Induced by Low Frequency Cyclic Loading
Study Design.: Microstructural investigation of low frequency cyclic loading and flexing of the lumbar disc. Objective.: To explore micro-level structural damage in motion segments subjected to low frequency repetitive loading and flexing at sub-acute loads. Summary of Background Data.: Cumulative exposure to mechanical load has been implicated in low back pain and injury. The mechanical pathways by which cyclic loading physically affects spine tissues remain unclear, in part due to the absence of high quality microstructural evidence. Methods.: The study utilized seven intact ovine lumbar spines and from each spine one motion segment was used as a control, two others were cyclically loaded. Ten motion segments were subjected to 5000 cycles at 0.5 Hz with a peak load corresponding to ∼30% of that required to achieve failure. An additional small group of segments subjected to 10,000 or 30,000 cycles was similarly analyzed. Following chemical fixation and decalcification samples were cryosectioned along one of the oblique fiber angles and imaged in their fully hydrated state using differential interference contrast optical microscopy. Structural damage obtained from the images was organized into an algebraic shell for analysis. Results.: At 5000 cycles the disc damage was limited to inner wall distortions, evidence of stress concentrations at bridging-lamellae attachments, and small delaminations. The high-cycle discs tested exhibited significant mid-wall damage. There was no evidence of nuclear material being displaced. Conclusion.: At this low frequency and without the application of sustained loading or a more severe loading regime, or maintaining a constant flexion with repetitive loading, it seems unlikely that actual nuclear migration occurs. It is possible that the inner-annular damage shown in the low dose group could disrupt pathways for nutrient diffusion leading to earlier cell death and matrix degradation, thus contributing to a cascade of degeneration. Level of Evidence: N/A
- 8 August 2017
- Published by Springer Nature in European Spine Journal
- Vol. 26 (10) , 2629-2641
A more realistic disc herniation model incorporating compression, flexion and facet-constrained shear: a mechanical and microstructural analysis. Part II: high rate or ‘surprise’ loading
Purpose Part I of this study explored mechanisms of disc failure in a complex posture incorporating physiological amounts of flexion and shear at a loading rate considerably lower than likely to occur in a typical in vivo manual handling situation. Given the strain-rate-dependent mechanical properties of the heavily hydrated disc, loading rate will likely influence the mechanisms of disc failure. Part II investigates the mechanisms of failure in healthy discs subjected to surprise-rate compression while held in the same complex posture. Methods 37 motion segments from 13 healthy mature ovine lumbar spines were compressed in a complex posture intended to simulate the situation arising when bending and twisting while lifting a heavy object at a displacement rate of 400 mm/min. Seven of the 37 samples reached the predetermined displacement prior to a reduction in load and were classified as early stage failures, providing insight to initial areas of disc disruption. Both groups of damaged discs were then analysed microstructurally using light microscopy. Results The average failure load under high rate complex loading was 6.96 kN (STD 1.48 kN), significantly lower statistically than for low rate complex loading [8.42 kN (STD 1.22 kN)]. Also, unlike simple flexion or low rate complex loading, direct radial ruptures and non-continuous mid-wall tearing in the posterior and posterolateral regions were commonly accompanied by disruption extending to the lateral and anterior disc. Conclusion This study has again shown that multiple modes of damage are common when compressing a segment in a complex posture, and the load bearing ability, already less than in a neutral or flexed posture, is further compromised with high rate complex loading.
- 8 August 2017
- Published by Springer Nature in European Spine Journal
- Vol. 26 (10) , 2629-2641
A more realistic disc herniation model incorporating compression, flexion and facet-constrained shear: a mechanical and microstructural analysis. Part II: high rate or ‘surprise’ loading
Purpose Part I of this study explored mechanisms of disc failure in a complex posture incorporating physiological amounts of flexion and shear at a loading rate considerably lower than likely to occur in a typical in vivo manual handling situation. Given the strain-rate-dependent mechanical properties of the heavily hydrated disc, loading rate will likely influence the mechanisms of disc failure. Part II investigates the mechanisms of failure in healthy discs subjected to surprise-rate compression while held in the same complex posture. Methods 37 motion segments from 13 healthy mature ovine lumbar spines were compressed in a complex posture intended to simulate the situation arising when bending and twisting while lifting a heavy object at a displacement rate of 400 mm/min. Seven of the 37 samples reached the predetermined displacement prior to a reduction in load and were classified as early stage failures, providing insight to initial areas of disc disruption. Both groups of damaged discs were then analysed microstructurally using light microscopy. Results The average failure load under high rate complex loading was 6.96 kN (STD 1.48 kN), significantly lower statistically than for low rate complex loading [8.42 kN (STD 1.22 kN)]. Also, unlike simple flexion or low rate complex loading, direct radial ruptures and non-continuous mid-wall tearing in the posterior and posterolateral regions were commonly accompanied by disruption extending to the lateral and anterior disc. Conclusion This study has again shown that multiple modes of damage are common when compressing a segment in a complex posture, and the load bearing ability, already less than in a neutral or flexed posture, is further compromised with high rate complex loading.