Stefano Diodati
Research Subjects
Stefano Diodati has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Silvia Gross
Institute for Chemical Technology and Polymer Chemistry (ITCP), Karlsruhe Institute of Technology (KIT) , Engesserstraße 20
8 shared publications - Paolo Dolcet
Institute for Chemical Technology and Polymer Chemistry (ITCP) Karlsruhe Institute of Technology (KIT) Karlsruhe Germany
4 shared publications - Denis Badocco
Department of Chemical Sciences, University of Padova, Padova, Italy
3 shared publications - Francesca Tajoli
Dipartimento di Scienze Chimiche, Università degli Studi di Padova, via Marzolo 1, Padova 35131, Italy
3 shared publications - Paolo Pastore
Department of Chemical Sciences, University of Padova, Via Marzolo 1, 35131 Padova, Italy
3 shared publications - Bernd Michael Smarsly
Institute of Physical Chemistry, Justus Liebig University, Heinrich-Buff-Ring 17, Giessen D-35392, Germany
2 shared publications
Latest Publications
- 27 July 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (42)
Frontispiece: Low‐Temperature Solution Crystallization of Nanostructured Oxides and Thin Films
- 27 July 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (42)
Frontispiece: Low‐Temperature Solution Crystallization of Nanostructured Oxides and Thin Films
- 25 March 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (42) , 9157-9179
Low‐Temperature Solution Crystallization of Nanostructured Oxides and Thin Films
As an introduction to this themed issue, a critically selected overview of recent progress on the topic of solution methods for the low‐temperature crystallization of nanoscale oxide materials is presented. It is focused on the low‐temperature solution processing of oxide nanostructures and thin films. Benefits derived from these methods span from minimizing the environmental impact to reducing the fabrication costs. In addition, this topic is regarded as a key objective in the area because it offers a unique opportunity for the use of these materials in areas like flexible electronics, energy conversion and storage, environmental sciences, catalysis, or biomedicine.
- 25 March 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (42) , 9157-9179
Low‐Temperature Solution Crystallization of Nanostructured Oxides and Thin Films
As an introduction to this themed issue, a critically selected overview of recent progress on the topic of solution methods for the low‐temperature crystallization of nanoscale oxide materials is presented. It is focused on the low‐temperature solution processing of oxide nanostructures and thin films. Benefits derived from these methods span from minimizing the environmental impact to reducing the fabrication costs. In addition, this topic is regarded as a key objective in the area because it offers a unique opportunity for the use of these materials in areas like flexible electronics, energy conversion and storage, environmental sciences, catalysis, or biomedicine.
- 14 October 2019
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 21 (44) , 6801-6809
Quaternary ferrites by batch and continuous flow hydrothermal synthesis: a comparison
Crystalline spinel quaternary ferrites M x Zn 1−x Fe 2 O 4 (M = Co, Ni) were synthesised through two synthetic routes: conventional batch and continuous flow hydrothermal synthesis.
- 14 October 2019
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 21 (44) , 6801-6809
Quaternary ferrites by batch and continuous flow hydrothermal synthesis: a comparison
Crystalline spinel quaternary ferrites M x Zn 1−x Fe 2 O 4 (M = Co, Ni) were synthesised through two synthetic routes: conventional batch and continuous flow hydrothermal synthesis.
- 7 August 2019
- Published by Wiley in Chemistry – A European Journal
- Vol. 25 (59) , 13624-13634
Exploring the Phase‐Selective, Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature, Time, and Precursors
The aim of this work was i) to develop a hydrothermal, low‐temperature synthesis protocol affording the upconverting hexagonal phase NaYF4 with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb3+ and Er3+ ions were chosen as dopants for the NaYF4 material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP‐MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.
- 7 August 2019
- Published by Wiley in Chemistry – A European Journal
- Vol. 25 (59) , 13624-13634
Exploring the Phase‐Selective, Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature, Time, and Precursors
The aim of this work was i) to develop a hydrothermal, low‐temperature synthesis protocol affording the upconverting hexagonal phase NaYF4 with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb3+ and Er3+ ions were chosen as dopants for the NaYF4 material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP‐MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.
- 6 May 2019
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 6 (6) , 1527-1534
Exploring wet chemistry approaches to ZnFe2O4 spinel ferrite nanoparticles with different inversion degrees: a comparative study
ZnFe2O4 was synthesised through three different low-temperature routes to study the effect on the structural evolution of the compounds.
- 6 May 2019
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 6 (6) , 1527-1534
Exploring wet chemistry approaches to ZnFe2O4 spinel ferrite nanoparticles with different inversion degrees: a comparative study
ZnFe2O4 was synthesised through three different low-temperature routes to study the effect on the structural evolution of the compounds.
- 7 January 2019
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2019 (6) , 837-846
Easy and Green Route towards Nanostructured ZnO as an Active Sensing Material with Unexpected H2S Dosimeter‐Type Behaviour
Nanostructured ZnO particles were prepared through a straightforward, quick and low‐temperature synthesis route involving coprecipitation of the metal precursor salts with oxalic acid, followed by hydrothermal treatment at 135 or 160 °C. The synthesised nanostructured powders were thoroughly characterised by a wide array of analytical techniques from the morphological (Scanning Electron Microscopy ‐SEM‐, Transmission Electron Microscopy ‐TEM‐, Energy‐dispersive X‐ray Spectroscopy ‐EDXS‐), structural (Powder X‐ray Diffraction ‐PXRD‐, Selected Area Electron Diffraction ‐SAED‐), compositional (X‐ray Photoelectron Spectroscopy ‐XPS‐) and physical (thermal stability) point of view. As far as functional applications are concerned, the powders were tested as gas sensor materials for H2S detection. Thereby these ZnO particles showed unexpected gas dosimeter behaviour at 150 °C. Based on these observations and on a comparison with literature a new model for the interaction of ZnO nanostructures with H2S is proposed.
- 7 January 2019
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2019 (6) , 837-846
Easy and Green Route towards Nanostructured ZnO as an Active Sensing Material with Unexpected H2S Dosimeter‐Type Behaviour
Nanostructured ZnO particles were prepared through a straightforward, quick and low‐temperature synthesis route involving coprecipitation of the metal precursor salts with oxalic acid, followed by hydrothermal treatment at 135 or 160 °C. The synthesised nanostructured powders were thoroughly characterised by a wide array of analytical techniques from the morphological (Scanning Electron Microscopy ‐SEM‐, Transmission Electron Microscopy ‐TEM‐, Energy‐dispersive X‐ray Spectroscopy ‐EDXS‐), structural (Powder X‐ray Diffraction ‐PXRD‐, Selected Area Electron Diffraction ‐SAED‐), compositional (X‐ray Photoelectron Spectroscopy ‐XPS‐) and physical (thermal stability) point of view. As far as functional applications are concerned, the powders were tested as gas sensor materials for H2S detection. Thereby these ZnO particles showed unexpected gas dosimeter behaviour at 150 °C. Based on these observations and on a comparison with literature a new model for the interaction of ZnO nanostructures with H2S is proposed.
- 28 March 2018
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 20 (10) , 2257-2268
Very fast crystallisation of MFe2O4 spinel ferrites (M = Co, Mn, Ni, Zn) under low temperature hydrothermal conditions: a time-resolved structural investigation
MFe2O4 spinel ferrites (M = Co, Mn, Ni, Zn) were synthesised through a low-temperature aqueous route combining co-precipitation of oxalates and hydrothermal treatment at 135 °C. With the objective of gaining a deeper understanding of the structural evolution of the compounds to crystalline materials during the synthetic process, samples were prepared within different reaction times, showing in most cases a fully crystalline habit already after short treatment times. The resulting solids were characterised through several state-of-the-art analytical techniques, both on the atomic (XAS) and mesoscopic (XRPD, SAXS) scales. In parallel, temperature-programmed characterisation was carried out to investigate the evolution of the compounds during the heating process.
- 28 March 2018
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 20 (10) , 2257-2268
Very fast crystallisation of MFe2O4 spinel ferrites (M = Co, Mn, Ni, Zn) under low temperature hydrothermal conditions: a time-resolved structural investigation
MFe2O4 spinel ferrites (M = Co, Mn, Ni, Zn) were synthesised through a low-temperature aqueous route combining co-precipitation of oxalates and hydrothermal treatment at 135 °C. With the objective of gaining a deeper understanding of the structural evolution of the compounds to crystalline materials during the synthetic process, samples were prepared within different reaction times, showing in most cases a fully crystalline habit already after short treatment times. The resulting solids were characterised through several state-of-the-art analytical techniques, both on the atomic (XAS) and mesoscopic (XRPD, SAXS) scales. In parallel, temperature-programmed characterisation was carried out to investigate the evolution of the compounds during the heating process.
- 23 February 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 5 (13) , 3359-3371
Pursuing the stabilisation of crystalline nanostructured magnetic manganites through a green low temperature hydrothermal synthesis
A quick, easy and green water-based synthesis protocol involving coprecipitation of oxalates combined with hydrothermal treatment resulted in the crystallisation of nanostructured manganites at a relatively low temperature (180 °C). The subcritical hydrothermal approach was shown to play a key role in stabilising phases which are generally achieved at much higher temperatures and under harsher conditions, thus disclosing an exciting alternative for their synthesis. Through this mild wet chemistry approach, the compounds CuMnO2, ZnMn2O4 and ZnMnO3 were synthesised as nanocrystalline powders. Noticeably, the optimised route proved to be effective in stabilising the exotic polymorph cubic spinel ZnMnO3 in pure form. This is particularly notable, as very few records concerning this compound are available in the literature. The compounds were fully characterised from compositional, structural, morphological and magnetic points of view.
- 23 February 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 5 (13) , 3359-3371
Pursuing the stabilisation of crystalline nanostructured magnetic manganites through a green low temperature hydrothermal synthesis
A quick, easy and green water-based synthesis protocol involving coprecipitation of oxalates combined with hydrothermal treatment resulted in the crystallisation of nanostructured manganites at a relatively low temperature (180 °C). The subcritical hydrothermal approach was shown to play a key role in stabilising phases which are generally achieved at much higher temperatures and under harsher conditions, thus disclosing an exciting alternative for their synthesis. Through this mild wet chemistry approach, the compounds CuMnO2, ZnMn2O4 and ZnMnO3 were synthesised as nanocrystalline powders. Noticeably, the optimised route proved to be effective in stabilising the exotic polymorph cubic spinel ZnMnO3 in pure form. This is particularly notable, as very few records concerning this compound are available in the literature. The compounds were fully characterised from compositional, structural, morphological and magnetic points of view.