Francesca Tajoli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francesca Tajoli has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Silvia Gross
Institute for Chemical Technology and Polymer Chemistry (ITCP), Karlsruhe Institute of Technology (KIT) , Engesserstraße 20
10 shared publications - Jan-Dierk Grunwaldt
Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology, Engesserstraße 20, 76131 Karlsruhe, Germany
3 shared publications - Paolo Dolcet
Institute for Chemical Technology and Polymer Chemistry (ITCP) Karlsruhe Institute of Technology (KIT) Karlsruhe Germany
3 shared publications - Stefano Diodati
Dipartimento di Scienze Chimiche
3 shared publications - Adolfo Speghini
University of Verona
2 shared publications - Christian Kübel
Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany
2 shared publications
Latest Publications
- Open Access
- 12 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (7) , 3289-3303
Confining the Synthesis of Palladium Nanoparticles in Mesoporous Silicas for CO Oxidation: The Role of the Support
- 12 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (7) , 3289-3303
Open AccessConfining the Synthesis of Palladium Nanoparticles in Mesoporous Silicas for CO Oxidation: The Role of the Support
- Open Access
- 25 September 2024
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 26 (42) , 6052-6064
Eu( iii )-doped calcium molybdate nano- and microstructures: microfluidic synthesis and morphology tuning via solvent dielectric constant and viscosity control
Microfluidic synthesis of Eu( iii )-doped calcium molybdate structures: by changing the reaction conditions (solvent mixtures, temperature and quenching), particles with different sizes, size distributions and tunable optical properties were obtained.
- 25 September 2024
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 26 (42) , 6052-6064
Open AccessEu( iii )-doped calcium molybdate nano- and microstructures: microfluidic synthesis and morphology tuning via solvent dielectric constant and viscosity control
Microfluidic synthesis of Eu( iii )-doped calcium molybdate structures: by changing the reaction conditions (solvent mixtures, temperature and quenching), particles with different sizes, size distributions and tunable optical properties were obtained.
- Open Access
- 28 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (17) , 15510-15520
Effective Space Confinement by Inverse Miniemulsion for the Controlled Synthesis of Undoped and Eu3+-Doped Calcium Molybdate Nanophosphors: A Systematic Comparison with Batch Synthesis
- 28 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (17) , 15510-15520
Open AccessEffective Space Confinement by Inverse Miniemulsion for the Controlled Synthesis of Undoped and Eu3+-Doped Calcium Molybdate Nanophosphors: A Systematic Comparison with Batch Synthesis
- Open Access
- 14 March 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (6) , 1046
Exploring the Role of Miniemulsion Nanodroplet Confinement on the Crystallization of MoO3: Morphology Control and Insight on Crystal Formation by In Situ Time-Resolved SAXS/WAXS
Enclosed nanoscale volumes, i.e., confined spaces, represent a fascinating playground for the controlled synthesis of inorganic materials, albeit their role in determining the synthetic outcome is currently not fully understood. Herein, we address the synthesis of MoO3 nano- and microrods with hexagonal section in inverse miniemulsion droplets and batch conditions, evaluating the effects of spatial confinement offered by miniemulsion droplets on their crystallization. Several synthetic parameters were systematically screened and their effect on the crystal structure of h-MoO3, as well as on its size, size distribution and morphology, were investigated. Moreover, a direct insight on the crystallization pathway of MoO3 in both synthetic conditions and as a function of synthetic parameters was provided by an in situ time-resolved SAXS/WAXS study, that confirmed the role of miniemulsion confined space in altering the stepwise process of the formation of h-MoO3.
- 14 March 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (6) , 1046
Open AccessExploring the Role of Miniemulsion Nanodroplet Confinement on the Crystallization of MoO3: Morphology Control and Insight on Crystal Formation by In Situ Time-Resolved SAXS/WAXS
Enclosed nanoscale volumes, i.e., confined spaces, represent a fascinating playground for the controlled synthesis of inorganic materials, albeit their role in determining the synthetic outcome is currently not fully understood. Herein, we address the synthesis of MoO3 nano- and microrods with hexagonal section in inverse miniemulsion droplets and batch conditions, evaluating the effects of spatial confinement offered by miniemulsion droplets on their crystallization. Several synthetic parameters were systematically screened and their effect on the crystal structure of h-MoO3, as well as on its size, size distribution and morphology, were investigated. Moreover, a direct insight on the crystallization pathway of MoO3 in both synthetic conditions and as a function of synthetic parameters was provided by an in situ time-resolved SAXS/WAXS study, that confirmed the role of miniemulsion confined space in altering the stepwise process of the formation of h-MoO3.
- 16 June 2022
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 51 (30) , 11476-11484
Pursuing unprecedented anisotropic morphologies of halide-free Pd nanoparticles by tuning their nucleation and growth
In this paper, a highly effective and scalable polyol-based modified procedure is reported, yielding shape controlled Pd nanoparticles (NPs) formed via two distinct growth mechanisms as a function of the apparent pH. Starting from tetraethylammonium tetrahydroxypalladate (TEA)2[Pd(OH)4], a halide-free precursor, the resulting shape of the NPs ranged from highly defective worm-like nanostructures to well-defined polyhedra (tatrahedra, octahedra and 5-fold twins) as shown by TEM, HRTEM, and STEM. The effect of the different synthesis parameters was thoroughly investigated, finding that the apparent pH – modulated by adding diluted HNO3 – is the key parameter in determining the final size and shape of Pd NPs, whose evolution was followed during the reaction. A rational explanation of the observed shape modification as a function of apparent pH was proposed. The as-prepared Pd NPs, once dried, were analysed by means of XRD. DRIFT spectroscopy was used to show how CO binds on the Pd NPs after deposition on γ-Al2O3 as catalytic support.
- 16 June 2022
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 51 (30) , 11476-11484
Pursuing unprecedented anisotropic morphologies of halide-free Pd nanoparticles by tuning their nucleation and growth
In this paper, a highly effective and scalable polyol-based modified procedure is reported, yielding shape controlled Pd nanoparticles (NPs) formed via two distinct growth mechanisms as a function of the apparent pH. Starting from tetraethylammonium tetrahydroxypalladate (TEA)2[Pd(OH)4], a halide-free precursor, the resulting shape of the NPs ranged from highly defective worm-like nanostructures to well-defined polyhedra (tatrahedra, octahedra and 5-fold twins) as shown by TEM, HRTEM, and STEM. The effect of the different synthesis parameters was thoroughly investigated, finding that the apparent pH – modulated by adding diluted HNO3 – is the key parameter in determining the final size and shape of Pd NPs, whose evolution was followed during the reaction. A rational explanation of the observed shape modification as a function of apparent pH was proposed. The as-prepared Pd NPs, once dried, were analysed by means of XRD. DRIFT spectroscopy was used to show how CO binds on the Pd NPs after deposition on γ-Al2O3 as catalytic support.
- Open Access
- 25 February 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (5) , 2016
Work Function Tuning in Hydrothermally Synthesized Vanadium-Doped MoO3 and Co3O4 Mesostructures for Energy Conversion Devices
The wide interest in developing green energy technologies stimulates the scientific community to seek, for devices, new substitute material platforms with a low environmental impact, ease of production and processing and long-term stability. The synthesis of metal oxide (MO) semiconductors fulfils these requirements and efforts are addressed towards optimizing their functional properties through the improvement of charge mobility or energy level alignment. Two MOs have rising perspectives for application in light harvesting devices, mainly for the role of charge selective layers but also as light absorbers, namely MoO3 (an electron blocking layer) and Co3O4 (a small band gap semiconductor). The need to achieve better charge transport has prompted us to explore strategies for the doping of MoO3 and Co3O4 with vanadium (V) ions that, when combined with oxygen in V2O5, produce a high work function MO. We report on subcritical hydrothermal synthesis of V-doped mesostructures of MoO3 and of Co3O4, in which a tight control of the doping is exerted by tuning the relative amounts of reactants. We accomplished a full analytical characterization of these V-doped MOs that unambiguously demonstrates the incorporation of the vanadium ions in the host material, as well as the effects on the optical properties and work function. We foresee a promising future use of these materials as charge selective materials in energy devices based on multilayer structures.
- 25 February 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (5) , 2016
Open AccessWork Function Tuning in Hydrothermally Synthesized Vanadium-Doped MoO3 and Co3O4 Mesostructures for Energy Conversion Devices
The wide interest in developing green energy technologies stimulates the scientific community to seek, for devices, new substitute material platforms with a low environmental impact, ease of production and processing and long-term stability. The synthesis of metal oxide (MO) semiconductors fulfils these requirements and efforts are addressed towards optimizing their functional properties through the improvement of charge mobility or energy level alignment. Two MOs have rising perspectives for application in light harvesting devices, mainly for the role of charge selective layers but also as light absorbers, namely MoO3 (an electron blocking layer) and Co3O4 (a small band gap semiconductor). The need to achieve better charge transport has prompted us to explore strategies for the doping of MoO3 and Co3O4 with vanadium (V) ions that, when combined with oxygen in V2O5, produce a high work function MO. We report on subcritical hydrothermal synthesis of V-doped mesostructures of MoO3 and of Co3O4, in which a tight control of the doping is exerted by tuning the relative amounts of reactants. We accomplished a full analytical characterization of these V-doped MOs that unambiguously demonstrates the incorporation of the vanadium ions in the host material, as well as the effects on the optical properties and work function. We foresee a promising future use of these materials as charge selective materials in energy devices based on multilayer structures.
- Open Access
- 2 September 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (39) , 44074-44087
Microfluidic Crystallization of Surfactant-Free Doped Zinc Sulfide Nanoparticles for Optical Bioimaging Applications
- 2 September 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (39) , 44074-44087
Open AccessMicrofluidic Crystallization of Surfactant-Free Doped Zinc Sulfide Nanoparticles for Optical Bioimaging Applications
- 27 July 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (42)
Frontispiece: Low‐Temperature Solution Crystallization of Nanostructured Oxides and Thin Films
- 27 July 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (42)
Frontispiece: Low‐Temperature Solution Crystallization of Nanostructured Oxides and Thin Films
- 25 March 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (42) , 9157-9179
Low‐Temperature Solution Crystallization of Nanostructured Oxides and Thin Films
As an introduction to this themed issue, a critically selected overview of recent progress on the topic of solution methods for the low‐temperature crystallization of nanoscale oxide materials is presented. It is focused on the low‐temperature solution processing of oxide nanostructures and thin films. Benefits derived from these methods span from minimizing the environmental impact to reducing the fabrication costs. In addition, this topic is regarded as a key objective in the area because it offers a unique opportunity for the use of these materials in areas like flexible electronics, energy conversion and storage, environmental sciences, catalysis, or biomedicine.
- 25 March 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (42) , 9157-9179
Low‐Temperature Solution Crystallization of Nanostructured Oxides and Thin Films
As an introduction to this themed issue, a critically selected overview of recent progress on the topic of solution methods for the low‐temperature crystallization of nanoscale oxide materials is presented. It is focused on the low‐temperature solution processing of oxide nanostructures and thin films. Benefits derived from these methods span from minimizing the environmental impact to reducing the fabrication costs. In addition, this topic is regarded as a key objective in the area because it offers a unique opportunity for the use of these materials in areas like flexible electronics, energy conversion and storage, environmental sciences, catalysis, or biomedicine.
- 7 August 2019
- Published by Wiley in Chemistry – A European Journal
- Vol. 25 (59) , 13624-13634
Exploring the Phase‐Selective, Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature, Time, and Precursors
The aim of this work was i) to develop a hydrothermal, low‐temperature synthesis protocol affording the upconverting hexagonal phase NaYF4 with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb3+ and Er3+ ions were chosen as dopants for the NaYF4 material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP‐MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.
- 7 August 2019
- Published by Wiley in Chemistry – A European Journal
- Vol. 25 (59) , 13624-13634
Exploring the Phase‐Selective, Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature, Time, and Precursors
The aim of this work was i) to develop a hydrothermal, low‐temperature synthesis protocol affording the upconverting hexagonal phase NaYF4 with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb3+ and Er3+ ions were chosen as dopants for the NaYF4 material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP‐MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.