Tatiana S. Ilina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tatiana S. Ilina has a total of 140 co-authors. Here are the top co-authors by number of shared publications:
- Dmitry Anatolyevich Kiselev
National University of Science and Technology MISiS, Moscow, Russia
26 shared publications - Aleksandr M. Kislyuk
Department of Technology of Electronic Materials, Department of Materials Science of Semiconductors and Dielectrics, National University of Science and Technology, «MISIS», 119049 Moscow, Russia
8 shared publications - Andrei Vladimirovich Turutin
Department of Technology of Electronic Materials, Department of Materials Science of Semiconductors and Dielectrics, National University of Science and Technology, «MISIS», 119049 Moscow, Russia
8 shared publications - Ilya V. Kubasov
Department of Technology of Electronic Materials, Department of Materials Science of Semiconductors and Dielectrics, National University of Science and Technology, «MISIS», 119049 Moscow, Russia
8 shared publications - Mikhail D. Malinkovich
National University of Science and Technology “MISiS”, Moscow, Russia
8 shared publications - Alexander A. Temirov
National University of Science and Technology “MISiS”, Moscow, Russia
7 shared publications
Latest Publications
- 28 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (12)
Local magnetoelectric effect in Fe2O3/PVDF electrospun nanofibers
Local magnetoelectric interactions in polymer-based nanocomposites remain insufficiently understood at the nanoscale, particularly in systems with spatially heterogeneous distributions of magnetic fillers. This work investigates the local magnetoelectric effect in electrospun α-Fe2O3/polyvinylidene fluoride (PVDF) composite nanofibers using piezoresponse force microscopy under an applied magnetic field. The incorporation of α-Fe2O3 nanoparticles serves a dual role, providing magnetostrictive functionality while promoting the formation of the electroactive β-phase in the PVDF matrix, enabling effective magnetoelectric coupling at the nanoscale. Local magnetoelectric measurements performed under a static magnetic field of 180 mT revealed a pronounced increase in deformation amplitude together with modifications of the polarization behavior. Unlike macroscopic measurements, nanoscale analysis revealed pronounced spatial heterogeneity of the magnetoelectric response, directly associated with the nonuniform distribution of hematite nanoparticles within the PVDF matrix. The practical applicability of the developed composite was further demonstrated through magnetic-field-driven catalytic activity, resulting in up to 49% degradation of methylene blue. The results provide strong evidence for local magnetoelectric coupling in α-Fe2O3/PVDF composite nanofibers and highlight the potential of such nanocomposites for magnetically controlled catalytic and biomedical applications.
- 28 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (12)
Local magnetoelectric effect in Fe2O3/PVDF electrospun nanofibers
Local magnetoelectric interactions in polymer-based nanocomposites remain insufficiently understood at the nanoscale, particularly in systems with spatially heterogeneous distributions of magnetic fillers. This work investigates the local magnetoelectric effect in electrospun α-Fe2O3/polyvinylidene fluoride (PVDF) composite nanofibers using piezoresponse force microscopy under an applied magnetic field. The incorporation of α-Fe2O3 nanoparticles serves a dual role, providing magnetostrictive functionality while promoting the formation of the electroactive β-phase in the PVDF matrix, enabling effective magnetoelectric coupling at the nanoscale. Local magnetoelectric measurements performed under a static magnetic field of 180 mT revealed a pronounced increase in deformation amplitude together with modifications of the polarization behavior. Unlike macroscopic measurements, nanoscale analysis revealed pronounced spatial heterogeneity of the magnetoelectric response, directly associated with the nonuniform distribution of hematite nanoparticles within the PVDF matrix. The practical applicability of the developed composite was further demonstrated through magnetic-field-driven catalytic activity, resulting in up to 49% degradation of methylene blue. The results provide strong evidence for local magnetoelectric coupling in α-Fe2O3/PVDF composite nanofibers and highlight the potential of such nanocomposites for magnetically controlled catalytic and biomedical applications.
- Open Access
- 30 June 2026
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 12 (2) , 83-94
Prediction of ferroelectric properties of (K,Na)NbO3-based solid solutions with the aid of interpretable descriptors
This work puts forward an interpretable approach for predicting ferroelectric properties on the basis of sure independence screening and sparsifying operator (SISSO) method, which uses a symbol regression for studying mathematically compact expressions having explicit physical sense. In combination with ensemble machine learning (ML) methods, i.e., extra trees regressor (ETR), random forest (RF), gradient boosting regressor (GBR), and extreme gradient boosting (XGBoost), as well as SHAP (SHapley Additive exPlanations) analysis for the selection and interpretation of features, the approach developed in this work simultaneously delivers high prediction accuracy and possibility to study fundamental mechanisms underlying the formation of ferroelectric properties in materials. Based on the available experimental data for 476 potassium-sodium niobate (KNN-based) ceramic specimens, feature engineering has been carried out, as a result of which the key physical descriptors have been separated and the optimal choice of predictors has been determined. The model developed herein allows explicit, i.e., in a formularized form, description of quantitative relationships between structural parameters and functional characteristics of materials. The methodological approach to interpretable machine learning put forward in this work opens up new possibilities for the optimization-driven design of piezoelectric ceramics and other functional materials, and will be useful both for fundamental research and practical applications.
- 30 June 2026
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 12 (2) , 83-94
Open AccessPrediction of ferroelectric properties of (K,Na)NbO3-based solid solutions with the aid of interpretable descriptors
This work puts forward an interpretable approach for predicting ferroelectric properties on the basis of sure independence screening and sparsifying operator (SISSO) method, which uses a symbol regression for studying mathematically compact expressions having explicit physical sense. In combination with ensemble machine learning (ML) methods, i.e., extra trees regressor (ETR), random forest (RF), gradient boosting regressor (GBR), and extreme gradient boosting (XGBoost), as well as SHAP (SHapley Additive exPlanations) analysis for the selection and interpretation of features, the approach developed in this work simultaneously delivers high prediction accuracy and possibility to study fundamental mechanisms underlying the formation of ferroelectric properties in materials. Based on the available experimental data for 476 potassium-sodium niobate (KNN-based) ceramic specimens, feature engineering has been carried out, as a result of which the key physical descriptors have been separated and the optimal choice of predictors has been determined. The model developed herein allows explicit, i.e., in a formularized form, description of quantitative relationships between structural parameters and functional characteristics of materials. The methodological approach to interpretable machine learning put forward in this work opens up new possibilities for the optimization-driven design of piezoelectric ceramics and other functional materials, and will be useful both for fundamental research and practical applications.
- 22 December 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (1)
Origin of chemical shifts in K 2p x-ray photoelectron spectra
The interpretation of core-level binding energy (BE) chemical shifts measured by XPS can be complex and sometimes incorrect, since theу are often contributed to multiple mechanisms. This work deals with K 2p BE shifts on the basis of experimental data on a PHI5000 VersaProbeII spectrometer and theoretical calculations of binding energies for the core-K 2p level using the Δ Self-Consistent Field method. The experimental samples were KNbO3 cleaves and wafers before and after irradiation with atom and cluster beams of argon ions, as well as potassium hydrocarbonate and carbonate powders. Furthermore, our earlier data on KNN ceramics containing the K6Nb10.8O30 phase were used. The first-principle theoretical calculations were carried out for the KNbO3, K6Nb11O30, K2CO3, K2O, and KOH potassium compounds. We show that all the theoretically calculated and experimentally studied shifts have negative values. A good agreement between the calculated and measured shifts was obtained. The greatest negative shifts relative to the metallic potassium (−3.1 eV) were obtained for KNbO3 single crystals and KNN ceramics. Irradiation of KNbO3 with argon ions and clusters yielded additional spectra in the region of smaller shifts. The K 2p BE shifts of the other tested potassium compounds are in a broad region from −1.5 to −2.1 eV, and therefore additional features should be used for their correct interpretation.
- 22 December 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (1)
Origin of chemical shifts in K 2p x-ray photoelectron spectra
The interpretation of core-level binding energy (BE) chemical shifts measured by XPS can be complex and sometimes incorrect, since theу are often contributed to multiple mechanisms. This work deals with K 2p BE shifts on the basis of experimental data on a PHI5000 VersaProbeII spectrometer and theoretical calculations of binding energies for the core-K 2p level using the Δ Self-Consistent Field method. The experimental samples were KNbO3 cleaves and wafers before and after irradiation with atom and cluster beams of argon ions, as well as potassium hydrocarbonate and carbonate powders. Furthermore, our earlier data on KNN ceramics containing the K6Nb10.8O30 phase were used. The first-principle theoretical calculations were carried out for the KNbO3, K6Nb11O30, K2CO3, K2O, and KOH potassium compounds. We show that all the theoretically calculated and experimentally studied shifts have negative values. A good agreement between the calculated and measured shifts was obtained. The greatest negative shifts relative to the metallic potassium (−3.1 eV) were obtained for KNbO3 single crystals and KNN ceramics. Irradiation of KNbO3 with argon ions and clusters yielded additional spectra in the region of smaller shifts. The K 2p BE shifts of the other tested potassium compounds are in a broad region from −1.5 to −2.1 eV, and therefore additional features should be used for their correct interpretation.
- 24 November 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (47) , 475303
Decoupling activation energies of bulk and charged domain wall conductivity in reduced lithium niobate
Charged domain walls (CDWs) in ferroelectrics exhibit enhanced and tunable conductivity, making them attractive for devices such as non-volatile memories, memristors, and hybrid electro-optic-mechanical systems. Most previous studies of CDWs in lithium niobate (LiNbO 3 ) have focused on Mg-doped crystals. Here, we investigate an extended head-to-head CDW with an inclination angle close to 90°, formed in nominally pure congruent LiNbO 3 during high-temperature reduction annealing near the Curie point. The electrophysical properties of such reduced bidomain crystals, where the bulk shows mixed free- and bound-polaron transport, remain largely unexplored. We systematically measured temperature-dependent current–voltage characteristics from room temperature up to 60 °C using planar structure with Ti electrodes. Data were acquired separately on electrodes contacting the single-domain bulk and those intersecting the CDW (where the measured current is a sum of the CDW and the surrounding single-domain conductivity). Applying the R2D2 equivalent-circuit model enabled us to isolate the intrinsic conductivity of the CDW itself from the parallel conduction channel of the adjacent single-domain matrix. The analysis revealed a stark contrast in activation energies. In the bulk, it was ≈0.5 eV, attributed to bound-polaron hopping. At the CDW, however, the activation energy was not only significantly lower but also exhibited a pronounced polarity dependence: 0.13 eV for one voltage bias and 0.20 eV for the opposite polarity. This anisotropy and the suppression of the activation energy are consistent with a high-density free-polaron gas near the wall, where strong mutual repulsion between carriers reduces the energy barrier for charge transport. Independent determination of currents and activation energies for bulk and domain walls provides new insight into charge-transport mechanisms in ferroelectrics and highlights the potential of domain-wall engineering for future nanoelectronics applications.
- 24 November 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (47) , 475303
Decoupling activation energies of bulk and charged domain wall conductivity in reduced lithium niobate
Charged domain walls (CDWs) in ferroelectrics exhibit enhanced and tunable conductivity, making them attractive for devices such as non-volatile memories, memristors, and hybrid electro-optic-mechanical systems. Most previous studies of CDWs in lithium niobate (LiNbO 3 ) have focused on Mg-doped crystals. Here, we investigate an extended head-to-head CDW with an inclination angle close to 90°, formed in nominally pure congruent LiNbO 3 during high-temperature reduction annealing near the Curie point. The electrophysical properties of such reduced bidomain crystals, where the bulk shows mixed free- and bound-polaron transport, remain largely unexplored. We systematically measured temperature-dependent current–voltage characteristics from room temperature up to 60 °C using planar structure with Ti electrodes. Data were acquired separately on electrodes contacting the single-domain bulk and those intersecting the CDW (where the measured current is a sum of the CDW and the surrounding single-domain conductivity). Applying the R2D2 equivalent-circuit model enabled us to isolate the intrinsic conductivity of the CDW itself from the parallel conduction channel of the adjacent single-domain matrix. The analysis revealed a stark contrast in activation energies. In the bulk, it was ≈0.5 eV, attributed to bound-polaron hopping. At the CDW, however, the activation energy was not only significantly lower but also exhibited a pronounced polarity dependence: 0.13 eV for one voltage bias and 0.20 eV for the opposite polarity. This anisotropy and the suppression of the activation energy are consistent with a high-density free-polaron gas near the wall, where strong mutual repulsion between carriers reduces the energy barrier for charge transport. Independent determination of currents and activation energies for bulk and domain walls provides new insight into charge-transport mechanisms in ferroelectrics and highlights the potential of domain-wall engineering for future nanoelectronics applications.
- Open Access
- 10 October 2025
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 11 (3) , 197-205
Modeling of ferroelectric properties of KNN-based ceramics
Replacement of highly noxious led zirconate titanate based materials in MEMS applications for environmentally safe materials remains an important task. Complex multicomponent doping of KNN ceramics provides for a significant improvement of their ferroelectric properties. The efficiency of different machine learning (ML) methods in the prediction of piezoelectric coefficient of KNN-based ceramics has been analyzed. ML integration allows one to accelerate the development of new materials and identify latent interdependences between their composition, structure, and properties. To understand the mechanisms of relationship between the composition and properties, we used the Sure Independence Screening and Sparsifying Operator (SISSO) method in combination with regression ML methods, such as Support Vector Regression, Ridge, Lasso, Elastic Net, Xtreme Gradient Boosting, Random Forest, Gradient Boosting Regression, and Extreme Tree Regression. The Gradient Boosting Regression (GBR) method proved to be the most efficient in combination with SISSO. The test sampling accuracy reached 81 %, and GBR validation for experimental data delivered a mean absolute error of 26 pC/N.
- 10 October 2025
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 11 (3) , 197-205
Open AccessModeling of ferroelectric properties of KNN-based ceramics
Replacement of highly noxious led zirconate titanate based materials in MEMS applications for environmentally safe materials remains an important task. Complex multicomponent doping of KNN ceramics provides for a significant improvement of their ferroelectric properties. The efficiency of different machine learning (ML) methods in the prediction of piezoelectric coefficient of KNN-based ceramics has been analyzed. ML integration allows one to accelerate the development of new materials and identify latent interdependences between their composition, structure, and properties. To understand the mechanisms of relationship between the composition and properties, we used the Sure Independence Screening and Sparsifying Operator (SISSO) method in combination with regression ML methods, such as Support Vector Regression, Ridge, Lasso, Elastic Net, Xtreme Gradient Boosting, Random Forest, Gradient Boosting Regression, and Extreme Tree Regression. The Gradient Boosting Regression (GBR) method proved to be the most efficient in combination with SISSO. The test sampling accuracy reached 81 %, and GBR validation for experimental data delivered a mean absolute error of 26 pC/N.
- Open Access
- 11 April 2025
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 11 (1) , 47-52
Analysis of phase changes during synthesis of Sr2Fe1.2Mo0.8O6-δ solid solution by the solid-phase reaction method
Phase transformations during crystallization of the magnetic metal-oxide compound Sr2Fe1.2Mo0.8O6-δ by the solid-phase reactions method from a mixture of simple reagents 2SrCO3 + 0.6Fe2O3 + 0.8MoO3 have been analyzed. By means of differential-thermal and thermogravimetric analyses it was found that the synthesis of strontium ferromolybdate of the Sr2Fe1.2Mo0.8O6-δ composition proceeds through a series of successive-parallel stages. In this way, when considering the dynamics of phase transformations, it has been found that the main accompanying compounds during the crystallization of the solid solution of double perovskite Sr2Fe1.2Mo0.8O6-δ are Fe2O3, SrCO3, SrMoO4 and SrFeO3. When analyzing the phase composition of the batch consisting of a mixture of initial reagents of stoichiometric composition: 2SrCO3 + 0.6Fe2O3 + 0.8MoO3, it was noted that with an increase in temperature, complex compounds SrMoO4, SrFeO3, and then Sr2Fe1.2Mo0.8O6-δ as well, appear almost simultaneously. This circumstance indicates that the compounds SrMoO4 and SrFeO3 are the structure-forming ones for the solid solution of ferromolybdate – strontium. With a subsequent increase in temperature to 1470 K, it was found that the dissolution of SrFeO3 with the formation of double perovskite Sr2Fe1.2Mo0.8O6-δ occurs faster than the dissolution of strontium molybdate SrMoO4. The results of the analysis indicate the difficult nature of the dynamics of solid-phase reactions during the formation of Sr2Fe1.2Mo0.8O6-δ.
- 11 April 2025
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 11 (1) , 47-52
Open AccessAnalysis of phase changes during synthesis of Sr2Fe1.2Mo0.8O6-δ solid solution by the solid-phase reaction method
Phase transformations during crystallization of the magnetic metal-oxide compound Sr2Fe1.2Mo0.8O6-δ by the solid-phase reactions method from a mixture of simple reagents 2SrCO3 + 0.6Fe2O3 + 0.8MoO3 have been analyzed. By means of differential-thermal and thermogravimetric analyses it was found that the synthesis of strontium ferromolybdate of the Sr2Fe1.2Mo0.8O6-δ composition proceeds through a series of successive-parallel stages. In this way, when considering the dynamics of phase transformations, it has been found that the main accompanying compounds during the crystallization of the solid solution of double perovskite Sr2Fe1.2Mo0.8O6-δ are Fe2O3, SrCO3, SrMoO4 and SrFeO3. When analyzing the phase composition of the batch consisting of a mixture of initial reagents of stoichiometric composition: 2SrCO3 + 0.6Fe2O3 + 0.8MoO3, it was noted that with an increase in temperature, complex compounds SrMoO4, SrFeO3, and then Sr2Fe1.2Mo0.8O6-δ as well, appear almost simultaneously. This circumstance indicates that the compounds SrMoO4 and SrFeO3 are the structure-forming ones for the solid solution of ferromolybdate – strontium. With a subsequent increase in temperature to 1470 K, it was found that the dissolution of SrFeO3 with the formation of double perovskite Sr2Fe1.2Mo0.8O6-δ occurs faster than the dissolution of strontium molybdate SrMoO4. The results of the analysis indicate the difficult nature of the dynamics of solid-phase reactions during the formation of Sr2Fe1.2Mo0.8O6-δ.
- Open Access
- 30 December 2024
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 10 (4) , 217-226
Charge carrier distribution in the region of charged domain walls in reduced lithium niobate
Charged domain walls (CDWs) in ferroelectric materials are of interest from both fundamental and applied perspectives due to their unique electrophysical properties, which differ significantly from those of the bulk material. Until recently, research efforts primarily focused on studying these properties, while less attention was given to the finite-thickness regions of CDWs with heterogeneous electrical conductivity. This study proposes a model describing the charge carrier distribution within the conductive region of CDWs. The dependencies of charge carrier concentration and mobility on the distance from the CDW were determined. An analytical expression for current-voltage characteristics, measurable by conductive atomic force microscopy (c-AFM), was also proposed. The model has been experimentally validated using AFM methods. In particular, the Debye screening length of the electric field of head-to-head (H–H) CDWs by free charge carriers in strongly reduced LiNbO3 crystals was found to be 90±10 nm. Additionally, the values of mobility and concentration of polarons forming the conductive H–H CDW were determined. The bound polaron concentration in this region is estimated to be approximately 30 times greater than in the monodomain region, reaching ≈3.8·1017 cm-3.
- 30 December 2024
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 10 (4) , 217-226
Open AccessCharge carrier distribution in the region of charged domain walls in reduced lithium niobate
Charged domain walls (CDWs) in ferroelectric materials are of interest from both fundamental and applied perspectives due to their unique electrophysical properties, which differ significantly from those of the bulk material. Until recently, research efforts primarily focused on studying these properties, while less attention was given to the finite-thickness regions of CDWs with heterogeneous electrical conductivity. This study proposes a model describing the charge carrier distribution within the conductive region of CDWs. The dependencies of charge carrier concentration and mobility on the distance from the CDW were determined. An analytical expression for current-voltage characteristics, measurable by conductive atomic force microscopy (c-AFM), was also proposed. The model has been experimentally validated using AFM methods. In particular, the Debye screening length of the electric field of head-to-head (H–H) CDWs by free charge carriers in strongly reduced LiNbO3 crystals was found to be 90±10 nm. Additionally, the values of mobility and concentration of polarons forming the conductive H–H CDW were determined. The bound polaron concentration in this region is estimated to be approximately 30 times greater than in the monodomain region, reaching ≈3.8·1017 cm-3.
- Open Access
- 29 July 2024
- Published by National University of Science and Technology MISiS in Materials of Electronics Engineering
- Vol. 27 (3) , 223-231
Synthesis, crystal structure and ferroelectric properties of Ba2NdFeNb4O15/Si(001) films
Using the method of HF cathode sputtering in an oxygen atmosphere, Ba2NdFeNb4O15/Si(001) heterostructures with layer thicknesses from 75 to 1000 nm were manufactured. Their crystal structure, surface morphology, dielectric characteristics and features of the formation of the ferroelectric state were investigated. It has been established that the films are polycrystalline textured with a predominant orientation of the axes [001] in the direction normal to the substrate surface, in which a significant deformation of the unit cell was observed. It was found that as the thickness of the films increases, the roughness of their surface increases and follows the scaling law. From the volt-farad characteristics (in terms of displacement and hysteresis width), it was found that with a decrease in thickness, the coercive field increases and the internal field increases. This was also confirmed by measuring local residual hysteresis loops using piezoelectric force microscopy. In addition, by the local application of positive and negative external fields, it is possible to form polarized regions in which, in one case, the polarization vector is directed from the substrate to the surface of the film, and in the other, on the contrary, from the film to the substrate. Also, the effective piezoelectric coefficient was determined for all the studied heterostructures. The reasons for the revealed patterns are discussed.
- 29 July 2024
- Published by National University of Science and Technology MISiS in Materials of Electronics Engineering
- Vol. 27 (3) , 223-231
Open AccessSynthesis, crystal structure and ferroelectric properties of Ba2NdFeNb4O15/Si(001) films
Using the method of HF cathode sputtering in an oxygen atmosphere, Ba2NdFeNb4O15/Si(001) heterostructures with layer thicknesses from 75 to 1000 nm were manufactured. Their crystal structure, surface morphology, dielectric characteristics and features of the formation of the ferroelectric state were investigated. It has been established that the films are polycrystalline textured with a predominant orientation of the axes [001] in the direction normal to the substrate surface, in which a significant deformation of the unit cell was observed. It was found that as the thickness of the films increases, the roughness of their surface increases and follows the scaling law. From the volt-farad characteristics (in terms of displacement and hysteresis width), it was found that with a decrease in thickness, the coercive field increases and the internal field increases. This was also confirmed by measuring local residual hysteresis loops using piezoelectric force microscopy. In addition, by the local application of positive and negative external fields, it is possible to form polarized regions in which, in one case, the polarization vector is directed from the substrate to the surface of the film, and in the other, on the contrary, from the film to the substrate. Also, the effective piezoelectric coefficient was determined for all the studied heterostructures. The reasons for the revealed patterns are discussed.
- Open Access
- 27 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (22)
Micro-pixelated halide perovskite photodiodes fabricated with ultraviolet laser scribing
In this study, we present a complex investigation for miniaturizing perovskite photodiodes (PPDs) in various geometries with the use of ultraviolet laser scribing (UV-LS). Employing a 355 nm (3.5 eV) pulsed laser at 30 kHz, we manufactured PPDs with pixel configurations of 70 × 130, 520 × 580, and 2000 × 2000 μm2. The utilization of UV-LS has a proven efficiency in achieving relevant diode characteristics, such as low dark currents and high shunt resistance, as well as ultrafast response. The multi-step scribing cycle provided precise patterning of PPDs in a string design. The dark current densities demonstrated exceptional uniformity, ranging from 10−10 A/cm2 for 2000 × 2000 μm2 pixelated PPDs to 10−9 A/cm2 for the 70 × 130 μm2 configuration. The string PPDs, consisting of 10 pixels per string, displayed homogenous dark current values, ensuring effective isolation between devices. Under green light illumination (540 nm), all PPD types exhibited a broad linear dynamic range (LDR). Specifically, LDR values reached 110, 117, and 136 dB for 70 × 130, 520 × 580, and 2000 × 2000 devices, respectively, spanning an illumination intensity range from 2 × 10−3 to 2 mW/cm2. High responsivity values up to 0.38 A/W, depending on the PPDs' geometry, highlight the potential of laser scribing devices for sensing in the visible range. The calculated specific detectivity performance (from 1011 to 1013 Jones) surpasses commercial analogs, while the sub-microsecond response of 70 × 130 and 520 × 580 μm2 miniaturized devices underscores their suitability for precise time resolution detection systems.
- 27 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (22)
Open AccessMicro-pixelated halide perovskite photodiodes fabricated with ultraviolet laser scribing
In this study, we present a complex investigation for miniaturizing perovskite photodiodes (PPDs) in various geometries with the use of ultraviolet laser scribing (UV-LS). Employing a 355 nm (3.5 eV) pulsed laser at 30 kHz, we manufactured PPDs with pixel configurations of 70 × 130, 520 × 580, and 2000 × 2000 μm2. The utilization of UV-LS has a proven efficiency in achieving relevant diode characteristics, such as low dark currents and high shunt resistance, as well as ultrafast response. The multi-step scribing cycle provided precise patterning of PPDs in a string design. The dark current densities demonstrated exceptional uniformity, ranging from 10−10 A/cm2 for 2000 × 2000 μm2 pixelated PPDs to 10−9 A/cm2 for the 70 × 130 μm2 configuration. The string PPDs, consisting of 10 pixels per string, displayed homogenous dark current values, ensuring effective isolation between devices. Under green light illumination (540 nm), all PPD types exhibited a broad linear dynamic range (LDR). Specifically, LDR values reached 110, 117, and 136 dB for 70 × 130, 520 × 580, and 2000 × 2000 devices, respectively, spanning an illumination intensity range from 2 × 10−3 to 2 mW/cm2. High responsivity values up to 0.38 A/W, depending on the PPDs' geometry, highlight the potential of laser scribing devices for sensing in the visible range. The calculated specific detectivity performance (from 1011 to 1013 Jones) surpasses commercial analogs, while the sub-microsecond response of 70 × 130 and 520 × 580 μm2 miniaturized devices underscores their suitability for precise time resolution detection systems.