LWLixin Wang

Lixin Wang

*This is an algorithmically generated author record based on publicly available information.

Lixin Wang has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fabrications of High-Capacity Alpha-Ni(OH)2

    by Kwo-Hsiung Young, Lixin Wang, Shuli Yan, Xingqun Liao, Tiejun Meng, Haoting Shen, William C. Mays

    Three different methods were used to produce α-Ni(OH)2 with higher discharge capacities than the conventional β-Ni(OH)2, specifically a batch process of co-precipitation, a continuous process of co-precipitation with a phase transformation step (initial cycling), and an overcharge at low temperature. All three methods can produce α-Ni(OH)2 or α/β mixed-Ni(OH)2 with capacities higher than that of conventional β-Ni(OH)2 and a stable cycle performance. The second method produces a special core–shell β-Ni(OH)2/α-Ni(OH)2 structure with an excellent cycle stability in the flooded half-cell configuration, is innovative and also already mass-production ready. The core–shell structure has been investigated by both scanning and transmission electron microscopies. The shell portion of the particle is composed of α-Ni(OH)2 nano-crystals embedded in a β-Ni(OH)2 matrix, which helps to reduce the stress originating from the lattice expansion in the β-α transformation. A review on the research regarding α-Ni(OH)2 is also included in the paper.


  • Open Access

    New Type of Alkaline Rechargeable Battery—Ni-Ni Battery

    by Lixin Wang, Kwo-Hsiung Young, Hao-Ting Shen

    The feasibility of utilizing disordered Ni-based metal hydroxide, as both the anode and the cathode materials, in alkaline rechargeable batteries was validated for the first time. Co and Mn were introduced into the hexagonal Ni(OH)2 crystal structure to create disorder and defects that resulted in a conductivity increase. The highest discharge capacity of 55.6 mAh·g−1 was obtained using a commercial Li-ion cathode precursor, specifically NCM111 hydroxide, as anode material in the Ni-Ni battery. Charge/discharge curves, cyclic voltammetry (CV), X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray energy dispersive spectroscopy (EDS) analysis, and electron energy loss spectroscopy (EELS) were used to study the capacity degradation mechanism, and the segregation of Ni, Co, and Mn hydroxides in the mixed hydroxide. Further optimization of composition and control in micro-segregation are needed to increase the discharge capacity closer to the theoretical value, 578 mAh·g−1.