SZShihu Zhao

Shihu Zhao

*This is an algorithmically generated author record based on publicly available information.

Shihu Zhao has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of Favorable Fracture Area of Deep Coal Reservoirs Using a Combination of Field Joint Observation and Paleostress Numerical Simulation: A Case Study in the Linxing Area

    by Shihu Zhao, Yanbin Wang, Yali Liu, Zengqin Liu, Xiang Wu, Xinjun Chen, Jiaqi Zhang

    The development of fractures under multiple geological tectonic movements affects the occurrence and efficient production of free gas in deep coal reservoirs. Taking the No.8 deep coal seam of the Benxi formation in the Linxing area as the object, a method for evaluating favorable fracture areas is established based on the combination of field joint staging, paleogeological model reconstruction under structural leveling, finite element numerical simulation, and fracture development criteria. The results show that a large number of shear fractures and fewer tensile joints are developed in the Benxi formation in the field and mainly formed in the Yanshanian and Himalayan periods. The dominant strikes of conjugate joints in the Yanshanian period are NWW (100°~140°) and NNW (150°~175°), with the maximum principal stress magnitude being 160 MPa along the NW orientation. Those in the Himalayan period are in the NNE direction (0°~40°) and the EW direction (80°~110°), with the maximum principal stress magnitude being 100 MPa along the NE orientation. The magnitudes of the maximum principal stress of the No. 8 deep coal seam in the Yanshanian period are between −55 and −82 MPa, indicative of compression; those in the Himalayan period are from −34 to −70 MPa in the compressive stress form. Areas with high shear stress values are mainly distributed in the central magmatic rock uplift, indicating the influence of magmatic rock uplift on in situ stress distribution and fracture development. Based on the comprehensive evaluation factors of fractures, the reservoir is divided into five classes and 24 favorable fracture areas. Fractures in Class I areas and Class II areas are relatively well developed and were formed under two periods of tectonic movements. The method for evaluating favorable fracture areas is not only significant for the prediction of fractures and free gas contents in this deep coal reservoir but also has certain reference value for other reservoirs.


  • Open Access

    Characteristics of Deep Coal Reservoir and Key Control Factors of Coalbed Methane Accumulation in Linxing Area

    by Chuanqi Tao, Yong Li, Yanbin Wang, Xiaoming Ni, Xiang Wu, Shihu Zhao

    Deep coalbed methane (CBM, commonly accepted as >1500 m) has enormous exploration and development potential, whereas the commercial development of deep CBM exploration areas wordwide has been quite limited. The Linxing area, with coals buried approximately 2000 m deep, shows great development potential. Based on a basic geological analysis of structural and hydrodynamic conditions, combining field tests of reservoir temperature and pressure and indoor measurements of maceral composition, proximate analysis, thermal maturity, porosity and permeability, the factors controlling deep CBM accumulations were discussed. The results show that the present burial depth of the No. 8 + 9 coal seam, mainly between 1698 and 2158 m, exhibits a high reservoir temperature (45.0–64.0 °C) and pressure (15.6–18.8 MPa), except for the uplift area caused by the Zijinshan magma event (with coal depth approximately 1000 m). The maximum vitrinite reflectance (Ro,max) of the coal varies from 1.06% to 1.47%, while the magma-influenced areas reach 3.58% with a relatively high ash content of 31.3% (air-dry basis). The gas content calculated by field desorption tests shows a wide range from 7.18 to 21.64 m3/t. The key factors controlling methane accumulation are concluded from regional geological condition variations. The north area is mainly controlled by structural conditions and the high gas content area located in the syncline zones. The center area is dominated by the Zijinshan magma, with relatively high thermal maturity and a high gas content of as much as 14.5 m3/t. The south area is developed with gentle structural variations, and the gas content is mainly influenced by the regional faults. Furthermore, the groundwater activity in the eastern section is stronger than that in the west, and the hydrodynamic stagnant areas in the western are more beneficial for gas accumulation. The coals vary from 3.35% to 6.50% in porosity and 0.08 to 5.70 mD in permeability; thus, hydrofracturing considering high temperature and pressure should be applied carefully in future reservoir engineering, and the co-production of gas from adjacent tight sandstones also should be evaluated.


  • Open Access

    Geochemistry and Mineralogy of Lower Paleozoic Heituao Shale from Tadong Low Uplift of Tarim Basin, China: Implication for Shale Gas Development

    by Shihu Zhao, Yanbin Wang, Yong Li, Honghui Li, Zhaohui Xu, Xun Gong

    Tarim Basin is the largest Petroliferous basin in China, while its shale gas development potential has not been fully revealed. The organic-rich black shale in middle Ordovician Heituao Formation from Tadong low uplift of Tarim Basin has been considered as an important source rock and has the characteristic of large thickness, high organic matter content and high thermal maturity degree. To obtain its development potential, geochemical, mineralogical and mechanics research is conducted based on Rock-Eval pyrolysis, total organic carbon (TOC), X-ray diffraction (XRD) and uniaxial compression experiments. The results show that: (1) the TOC content ranges between 0.63 and 2.51 wt% with an average value of 1.22 wt%, the Tmax values are 382–523 °C (average = 468.9 °C), and the S2 value is relatively low which ranges from 0.08 to 1.37 mg HC/g rock (averaging of 0.42 mg HC/g rock); (2) the organic matter of Heituao shale in Tadong low uplift show poor abundance as indicated by low S2 value, gas-prone property, and post mature stage (stage of dry gas). (3) Quartz is the main mineral component in Heituao shale samples, accounting for 26–94 wt% with an average of 72 wt%. Additionally, its Young’s modulus ranges from 20.0 to 23.1 GPa with an average of 21.2 GPa, Poisson’s ratio ranges between 0.11 and 0.21 (average = 0.15); (4) the fracability parameter of brittleness index (BI) ranges between 0.28 and 0.99 (averaging of 0.85), indicating good fracability potential of Heituao shale of Tadong low uplift and has the potential for shale gas development. This study reveals the shale gas accumulation potential in middle Ordovician of the Tarim Basin, and beneficial for future exploration and production practice.