Chuanqi Tao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chuanqi Tao has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Chuanqi Tao
School of Civil Engineering, Liaoning Petrochemical University, Fushun 113001, China
2 shared publications - Haiyang Fu
School of Green Mining and Resource Engineering, Liaoning Petrochemical University, Fushun 113001, China
2 shared publications - Huan Miao
National Key Laboratory of Petroleum Resources and Engineering, China University of Petroleum (Beijing), Beijing, China
2 shared publications - Tongling Jing
School of Civil Engineering, Liaoning Petrochemical University, Fushun 113001, China
2 shared publications - Yanbin Wang
College of Geoscience and Surveying Engineering, China University of Mining and Technology, Beijing 100083, China
2 shared publications Jianqi Chen
CNOOC Energy Tech-Drilling & Production Co., Tianjin, China
1 shared publication
Latest Publications
- 3 January 2026
- Published by Springer Nature in Natural Resources Research
- Vol. 35 (3) , 1871-1887
Hydrological Spatial Development Characteristics of Deep Coal Seams and Evaluation of Gas Control Water Production
- 3 January 2026
- Published by Springer Nature in Natural Resources Research
- Vol. 35 (3) , 1871-1887
Hydrological Spatial Development Characteristics of Deep Coal Seams and Evaluation of Gas Control Water Production
- Open Access
- 14 August 2025
- Published by MDPI AG in Fractal and Fractional
- Vol. 9 (8) , 532
Analysis of the Microscopic Pore Structure Characteristics of Sandstone Based on Nuclear Magnetic Resonance Experiments and Nuclear Magnetic Resonance Logging Technology
This study focuses on the complex pore structure and pronounced heterogeneity of tight sandstone reservoirs in the Linxing area of the Ordos Basin and develops a multi-scale quantitative characterization approach to investigate the coupling mechanism between pore structure and reservoir properties. Six core samples were selected from the Shiqianfeng Formation (depth interval: 1326–1421 m) for detailed analysis. Cast thin sections and scanning electron microscopy (SEM) experiments were employed to characterize pore types and structural features. Nuclear magnetic resonance (NMR) experiments were conducted to obtain T2 spectra, which were used to classify bound and movable pores, and their corresponding fractal dimensions were calculated separately. In addition, NMR logging data from the corresponding well intervals were integrated to assess the applicability and consistency of the fractal characteristics at the logging scale. The results reveal that the fractal dimension of bound pores shows a positive correlation with porosity, whereas that of movable pores is negatively correlated with permeability, indicating that different scales of pore structural complexity exert distinct influences on reservoir performance. Mineral composition affects the evolution of pore structures through mechanisms such as framework support, dissolution, and pore-filling, thereby further enhancing reservoir heterogeneity. The consistency between logging responses and experimental observations verifies the regional applicability of fractal analysis. Bound pores dominate within the studied interval, and the vertical variation of the PMF/BVI ratio aligns closely with both the NMR T2 spectra and fractal results. This study demonstrates that fractal dimension is an effective descriptor of structural characteristics across different pore types and provides a theoretical foundation and methodological support for the evaluation of pore complexity and heterogeneity in tight sandstone reservoirs.
- 14 August 2025
- Published by MDPI AG in Fractal and Fractional
- Vol. 9 (8) , 532
Open AccessAnalysis of the Microscopic Pore Structure Characteristics of Sandstone Based on Nuclear Magnetic Resonance Experiments and Nuclear Magnetic Resonance Logging Technology
This study focuses on the complex pore structure and pronounced heterogeneity of tight sandstone reservoirs in the Linxing area of the Ordos Basin and develops a multi-scale quantitative characterization approach to investigate the coupling mechanism between pore structure and reservoir properties. Six core samples were selected from the Shiqianfeng Formation (depth interval: 1326–1421 m) for detailed analysis. Cast thin sections and scanning electron microscopy (SEM) experiments were employed to characterize pore types and structural features. Nuclear magnetic resonance (NMR) experiments were conducted to obtain T2 spectra, which were used to classify bound and movable pores, and their corresponding fractal dimensions were calculated separately. In addition, NMR logging data from the corresponding well intervals were integrated to assess the applicability and consistency of the fractal characteristics at the logging scale. The results reveal that the fractal dimension of bound pores shows a positive correlation with porosity, whereas that of movable pores is negatively correlated with permeability, indicating that different scales of pore structural complexity exert distinct influences on reservoir performance. Mineral composition affects the evolution of pore structures through mechanisms such as framework support, dissolution, and pore-filling, thereby further enhancing reservoir heterogeneity. The consistency between logging responses and experimental observations verifies the regional applicability of fractal analysis. Bound pores dominate within the studied interval, and the vertical variation of the PMF/BVI ratio aligns closely with both the NMR T2 spectra and fractal results. This study demonstrates that fractal dimension is an effective descriptor of structural characteristics across different pore types and provides a theoretical foundation and methodological support for the evaluation of pore complexity and heterogeneity in tight sandstone reservoirs.
- Open Access
Energy Variation Features during the Isothermal Adsorption of Coal under High-Temperature and High-Pressure Conditions
This paper aims to describe methane adsorption in coal under the conditions of high temperature and high pressure, as well as quantitatively decipher the change rule of energy in the isothermal adsorption process. The isothermal adsorption test was carried out with four groups of middle-rank coals from the Linxing area with different degrees of metamorphism. The impacts of the degree of deterioration of coal, temperature, and pressure on adsorption were analyzed with regard to the adsorption amount, adsorption potential, and adsorption space. Additionally, the energy change during the adsorption of methane by the coal was considered. The results show that the coal adsorption capacity hinges on the degree of deterioration of the coal, as well as the pressure and temperature. Additionally, the impact of temperature upon coal methane adsorption under depth conditions is highlighted. Like the adsorption space, the adsorption potential is an important parameter used to quantitatively characterize the adsorption ease and adsorption capacity; furthermore, the adsorption potential of millipores exceeds that of mesopores, as they are capable of offering a larger specific surface area for adsorption. The total decrease in the surface free energy during adsorption increases as the pressure increases; simultaneously, the increase rate is fast and then slow. The total decrease in the above-described free energy diminishes as the temperature escalates. Under the same pressure, the total decrease in the aforementioned free energy increases as the reflectance of the specular body of the coal increases. The decrease in the aforementioned free energy at each point of pressure lessens as the pressure grows; notably, when the pressure is comparatively low, the reduction is very fast. As the pressure escalates continuously, the decrease speed is slow. Regarding the effect of pressure and temperature upon adsorption, the adsorption gas volume of coal exists in a conversion depth from 1200 m to 1500 m; at the same time, the impact of pressure upon adsorption is dominant up to this depth. Additionally, beyond this depth, temperature gradually comes to have the greatest impact on adsorption.
Open AccessEnergy Variation Features during the Isothermal Adsorption of Coal under High-Temperature and High-Pressure Conditions
This paper aims to describe methane adsorption in coal under the conditions of high temperature and high pressure, as well as quantitatively decipher the change rule of energy in the isothermal adsorption process. The isothermal adsorption test was carried out with four groups of middle-rank coals from the Linxing area with different degrees of metamorphism. The impacts of the degree of deterioration of coal, temperature, and pressure on adsorption were analyzed with regard to the adsorption amount, adsorption potential, and adsorption space. Additionally, the energy change during the adsorption of methane by the coal was considered. The results show that the coal adsorption capacity hinges on the degree of deterioration of the coal, as well as the pressure and temperature. Additionally, the impact of temperature upon coal methane adsorption under depth conditions is highlighted. Like the adsorption space, the adsorption potential is an important parameter used to quantitatively characterize the adsorption ease and adsorption capacity; furthermore, the adsorption potential of millipores exceeds that of mesopores, as they are capable of offering a larger specific surface area for adsorption. The total decrease in the surface free energy during adsorption increases as the pressure increases; simultaneously, the increase rate is fast and then slow. The total decrease in the above-described free energy diminishes as the temperature escalates. Under the same pressure, the total decrease in the aforementioned free energy increases as the reflectance of the specular body of the coal increases. The decrease in the aforementioned free energy at each point of pressure lessens as the pressure grows; notably, when the pressure is comparatively low, the reduction is very fast. As the pressure escalates continuously, the decrease speed is slow. Regarding the effect of pressure and temperature upon adsorption, the adsorption gas volume of coal exists in a conversion depth from 1200 m to 1500 m; at the same time, the impact of pressure upon adsorption is dominant up to this depth. Additionally, beyond this depth, temperature gradually comes to have the greatest impact on adsorption.
- Open Access
Characteristics of Deep Coal Reservoir and Key Control Factors of Coalbed Methane Accumulation in Linxing Area
Deep coalbed methane (CBM, commonly accepted as >1500 m) has enormous exploration and development potential, whereas the commercial development of deep CBM exploration areas wordwide has been quite limited. The Linxing area, with coals buried approximately 2000 m deep, shows great development potential. Based on a basic geological analysis of structural and hydrodynamic conditions, combining field tests of reservoir temperature and pressure and indoor measurements of maceral composition, proximate analysis, thermal maturity, porosity and permeability, the factors controlling deep CBM accumulations were discussed. The results show that the present burial depth of the No. 8 + 9 coal seam, mainly between 1698 and 2158 m, exhibits a high reservoir temperature (45.0–64.0 °C) and pressure (15.6–18.8 MPa), except for the uplift area caused by the Zijinshan magma event (with coal depth approximately 1000 m). The maximum vitrinite reflectance (Ro,max) of the coal varies from 1.06% to 1.47%, while the magma-influenced areas reach 3.58% with a relatively high ash content of 31.3% (air-dry basis). The gas content calculated by field desorption tests shows a wide range from 7.18 to 21.64 m3/t. The key factors controlling methane accumulation are concluded from regional geological condition variations. The north area is mainly controlled by structural conditions and the high gas content area located in the syncline zones. The center area is dominated by the Zijinshan magma, with relatively high thermal maturity and a high gas content of as much as 14.5 m3/t. The south area is developed with gentle structural variations, and the gas content is mainly influenced by the regional faults. Furthermore, the groundwater activity in the eastern section is stronger than that in the west, and the hydrodynamic stagnant areas in the western are more beneficial for gas accumulation. The coals vary from 3.35% to 6.50% in porosity and 0.08 to 5.70 mD in permeability; thus, hydrofracturing considering high temperature and pressure should be applied carefully in future reservoir engineering, and the co-production of gas from adjacent tight sandstones also should be evaluated.
Open AccessCharacteristics of Deep Coal Reservoir and Key Control Factors of Coalbed Methane Accumulation in Linxing Area
Deep coalbed methane (CBM, commonly accepted as >1500 m) has enormous exploration and development potential, whereas the commercial development of deep CBM exploration areas wordwide has been quite limited. The Linxing area, with coals buried approximately 2000 m deep, shows great development potential. Based on a basic geological analysis of structural and hydrodynamic conditions, combining field tests of reservoir temperature and pressure and indoor measurements of maceral composition, proximate analysis, thermal maturity, porosity and permeability, the factors controlling deep CBM accumulations were discussed. The results show that the present burial depth of the No. 8 + 9 coal seam, mainly between 1698 and 2158 m, exhibits a high reservoir temperature (45.0–64.0 °C) and pressure (15.6–18.8 MPa), except for the uplift area caused by the Zijinshan magma event (with coal depth approximately 1000 m). The maximum vitrinite reflectance (Ro,max) of the coal varies from 1.06% to 1.47%, while the magma-influenced areas reach 3.58% with a relatively high ash content of 31.3% (air-dry basis). The gas content calculated by field desorption tests shows a wide range from 7.18 to 21.64 m3/t. The key factors controlling methane accumulation are concluded from regional geological condition variations. The north area is mainly controlled by structural conditions and the high gas content area located in the syncline zones. The center area is dominated by the Zijinshan magma, with relatively high thermal maturity and a high gas content of as much as 14.5 m3/t. The south area is developed with gentle structural variations, and the gas content is mainly influenced by the regional faults. Furthermore, the groundwater activity in the eastern section is stronger than that in the west, and the hydrodynamic stagnant areas in the western are more beneficial for gas accumulation. The coals vary from 3.35% to 6.50% in porosity and 0.08 to 5.70 mD in permeability; thus, hydrofracturing considering high temperature and pressure should be applied carefully in future reservoir engineering, and the co-production of gas from adjacent tight sandstones also should be evaluated.