Carol L. Luukkonen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Carol L. Luukkonen has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Cheryl A. Buchwald
U.S. Geological Survey Madison Wisconsin USA
2 shared publications - Allegra E. Johnson Mckee1 shared publication
- Althea A. ArchMiller
U.S. Geological Survey, Water Mission Area, Reston, VA, United States of America
1 shared publication - Amy E. Galanter
Department of Earth & Environmental Sciences New Mexico Institute of Mining & Technology Socorro New Mexico USA
1 shared publication - Anthony J. Martinez
Integrated Information Dissemination Division
1 shared publication Ayman H. Alzraiee
U.S. Geological Survey Sacramento California USA
1 shared publication
Latest Publications
- 1 January 2026
- Published by US Geological Survey
Analysis of groundwater geochemistry in the Lansing, Michigan, area
Groundwater resources in the Lansing, Michigan, area are protected by a wellhead protection plan, but previous studies have indicated that groundwater in this area may be susceptible to surface contamination. The U.S. Geological Survey, in cooperation with the Lansing Board of Water & Light, analyzed geochemical and aquifer characteristics to assess the potential for contamination of groundwater resources. Recharge age categories were determined from tritium concentrations for some wells, and by using ternary diagrams and principal component analysis for other wells. These age classifications, combined with hydrogeologic and geochemical data, were analyzed by using statistical methods to identify trends that may indicate areas of increased groundwater susceptibility. Wells with modern recharge tended to have higher sodium, chloride, and chloride:bromide ratios than did wells with mixed recharge, suggesting greater surface connectivity and potential influence from anthropogenic sources such as road salt. In contrast, wells in the mixed age category exhibited more stable geochemistry and lower constituent concentrations. Classification and regression tree models identified aquifer geometry—particularly the thickness of the uppermost bedrock unit and presence of confining layers—as key predictors of recharge age and geochemical indicators. The trends identified from these analyses could help to reveal locations in the Lansing area that are among the most susceptible to contamination.
- 1 January 2026
- Published by US Geological Survey
Analysis of groundwater geochemistry in the Lansing, Michigan, area
Groundwater resources in the Lansing, Michigan, area are protected by a wellhead protection plan, but previous studies have indicated that groundwater in this area may be susceptible to surface contamination. The U.S. Geological Survey, in cooperation with the Lansing Board of Water & Light, analyzed geochemical and aquifer characteristics to assess the potential for contamination of groundwater resources. Recharge age categories were determined from tritium concentrations for some wells, and by using ternary diagrams and principal component analysis for other wells. These age classifications, combined with hydrogeologic and geochemical data, were analyzed by using statistical methods to identify trends that may indicate areas of increased groundwater susceptibility. Wells with modern recharge tended to have higher sodium, chloride, and chloride:bromide ratios than did wells with mixed recharge, suggesting greater surface connectivity and potential influence from anthropogenic sources such as road salt. In contrast, wells in the mixed age category exhibited more stable geochemistry and lower constituent concentrations. Classification and regression tree models identified aquifer geometry—particularly the thickness of the uppermost bedrock unit and presence of confining layers—as key predictors of recharge age and geochemical indicators. The trends identified from these analyses could help to reveal locations in the Lansing area that are among the most susceptible to contamination.
- Open Access
- 8 December 2025
- Published by Wiley in Jawra Journal of the American Water Resources Association
- Vol. 61 (6)
Harmonization of a Water Withdrawal Dataset for the Conterminous United States
The U.S. Geological Survey is developing nationally consistent water‐use modeling approaches to replace previous methods relying on locally specific reported and estimated data. These national assessments require datasets that incorporate water withdrawal variability across the United States and over long periods. However, source data often have unclear definitions, missing or varied units, differing temporal resolutions, varied data quality, and inconsistent formats, which hinder automation and require individualized processing. The public‐supply datasets described in this paper were used in machine learning models to estimate annual and monthly public‐supply water use for 2000–2020 for the conterminous United States (CONUS) and in a model to estimate public‐supply deliveries. Public‐supply withdrawal data were acquired for the CONUS and the District of Columbia; however, 11 states had annual data for only 1 year, and 10 states had no monthly data. Annual withdrawal data were acquired for 81% of public‐supply water service areas, and monthly withdrawal data were acquired for 47% for at least 1 year from 2000 to 2020. These datasets and methods provide the most comprehensive collection of reported public‐supply withdrawals to date and can be used by water‐use managers, the scientific community, and the broader public. The extensive data processing described herein can be applicable to datasets representing other categories of water use.
- 8 December 2025
- Published by Wiley in Jawra Journal of the American Water Resources Association
- Vol. 61 (6)
Open AccessHarmonization of a Water Withdrawal Dataset for the Conterminous United States
The U.S. Geological Survey is developing nationally consistent water‐use modeling approaches to replace previous methods relying on locally specific reported and estimated data. These national assessments require datasets that incorporate water withdrawal variability across the United States and over long periods. However, source data often have unclear definitions, missing or varied units, differing temporal resolutions, varied data quality, and inconsistent formats, which hinder automation and require individualized processing. The public‐supply datasets described in this paper were used in machine learning models to estimate annual and monthly public‐supply water use for 2000–2020 for the conterminous United States (CONUS) and in a model to estimate public‐supply deliveries. Public‐supply withdrawal data were acquired for the CONUS and the District of Columbia; however, 11 states had annual data for only 1 year, and 10 states had no monthly data. Annual withdrawal data were acquired for 81% of public‐supply water service areas, and monthly withdrawal data were acquired for 47% for at least 1 year from 2000 to 2020. These datasets and methods provide the most comprehensive collection of reported public‐supply withdrawals to date and can be used by water‐use managers, the scientific community, and the broader public. The extensive data processing described herein can be applicable to datasets representing other categories of water use.
- Open Access
- 1 January 2025
- Published by US Geological Survey
Water use across the conterminous United States, water years 2010–20
Withdrawals of water for human use are fundamental to the evaluation of the Nation’s water availability. This chapter provides an analysis of public supply, crop irrigation, and thermoelectric power water use for the conterminous United States (CONUS) during water years 2010–20. These three categories account for about 90 percent of water withdrawals in the Nation. The values presented here are based on modeling approaches that estimate water use at temporal (monthly) and spatial scales (12-digit hydrologic unit code—small watersheds sized 50–100 square kilometers) compatible for integration into a broader national assessment of water availability. Models also provide an understanding of factors that influence water use.An estimated 244,817 million gallons per day (Mgal/d; 28,677 million cubic meters per month [Mm3/mo]) were withdrawn on average within the CONUS during water years 2010–20 from fresh water and saline water for crop irrigation, public supply, and thermoelectric power, with shares of 43, 14.5, and 42.5 percent for each of these categories, respectively. In the same period, estimated withdrawals and consumptive use (1) for public supply were 35,400 and 4,219 Mgal/d (4,081 and 486 Mm3/mo), respectively; (2) for crop irrigation were 105,497 and 75,698 Mgal/d (12,147 and 8,716 Mm3/mo), respectively; and (3) for thermoelectric power from fresh water were 82,656 and 2,904 Mgal/d (9,952 and 345 Mm3/mo), respectively.Withdrawals for these categories of water use are highly spatially variable, with western States dominated by crop irrigation and eastern States dominated by thermoelectric-power water use. Public supply accounts for the largest percentage of water use in several heavily populated northeastern States. Reliance on groundwater compared to surface water depends on the availability of water sources and the type of water use. For public supply, withdrawals from groundwater are greater than withdrawals from surface water in the Western aggregated hydrologic regions, whereas the balance shifts to more surface water for the rest of the CONUS. In all aggregated hydrologic regions, the predominant source of water for crop irrigation is groundwater. Most thermoelectric power facilities in the eastern half of the CONUS use surface water from freshwater and saline sources; most thermoelectric power facilities in the western half of the CONUS use groundwater.
- 1 January 2025
- Published by US Geological Survey
Open AccessWater use across the conterminous United States, water years 2010–20
Withdrawals of water for human use are fundamental to the evaluation of the Nation’s water availability. This chapter provides an analysis of public supply, crop irrigation, and thermoelectric power water use for the conterminous United States (CONUS) during water years 2010–20. These three categories account for about 90 percent of water withdrawals in the Nation. The values presented here are based on modeling approaches that estimate water use at temporal (monthly) and spatial scales (12-digit hydrologic unit code—small watersheds sized 50–100 square kilometers) compatible for integration into a broader national assessment of water availability. Models also provide an understanding of factors that influence water use.An estimated 244,817 million gallons per day (Mgal/d; 28,677 million cubic meters per month [Mm3/mo]) were withdrawn on average within the CONUS during water years 2010–20 from fresh water and saline water for crop irrigation, public supply, and thermoelectric power, with shares of 43, 14.5, and 42.5 percent for each of these categories, respectively. In the same period, estimated withdrawals and consumptive use (1) for public supply were 35,400 and 4,219 Mgal/d (4,081 and 486 Mm3/mo), respectively; (2) for crop irrigation were 105,497 and 75,698 Mgal/d (12,147 and 8,716 Mm3/mo), respectively; and (3) for thermoelectric power from fresh water were 82,656 and 2,904 Mgal/d (9,952 and 345 Mm3/mo), respectively.Withdrawals for these categories of water use are highly spatially variable, with western States dominated by crop irrigation and eastern States dominated by thermoelectric-power water use. Public supply accounts for the largest percentage of water use in several heavily populated northeastern States. Reliance on groundwater compared to surface water depends on the availability of water sources and the type of water use. For public supply, withdrawals from groundwater are greater than withdrawals from surface water in the Western aggregated hydrologic regions, whereas the balance shifts to more surface water for the rest of the CONUS. In all aggregated hydrologic regions, the predominant source of water for crop irrigation is groundwater. Most thermoelectric power facilities in the eastern half of the CONUS use surface water from freshwater and saline sources; most thermoelectric power facilities in the western half of the CONUS use groundwater.
- Open Access
- 1 January 2024
- Published by US Geological Survey
Data and knowledge gaps of a water bottling facility inventory and select water-use dataset, United States
In 2023, the U.S. Geological Survey developed a national inventory of water bottling facilities for the United States, including information about locations, water sources, water use, and a collection of other attributes. The purpose of the inventory was to provide information about water bottling facilities needed to assess and improve understanding of local-, regional-, and national-scale hydrologic and socioeconomic effects resulting from water extraction for bottling. Beverage types coded in the North American Industry Classification System under subsector 312 (Beverage and Tobacco Product Manufacturing) were compiled; however, facility information was often not publicly available, time intensive to search manually, and difficult to verify because there are no nationally available facility lists. A separate evaluation of facilities in the Great Lakes region identified some facilities that were missing and some with incorrect information. Ancillary facility attributes were primarily available from a proprietary business dataset and water-use data could only be acquired for a small subset of facilities. These limitations and deficiencies may affect the types of analyses that can be done using the inventory information. Therefore, the following data-quality aspects are used to describe the information compiled in the facility and water-use tables: completeness, uniqueness, validity, timeliness, accuracy, consistency, and accessibility. The resulting implications of the data and knowledge gaps are that users of the data may need to make additional evaluations of the inventory information for some analyses.
- 1 January 2024
- Published by US Geological Survey
Open AccessData and knowledge gaps of a water bottling facility inventory and select water-use dataset, United States
In 2023, the U.S. Geological Survey developed a national inventory of water bottling facilities for the United States, including information about locations, water sources, water use, and a collection of other attributes. The purpose of the inventory was to provide information about water bottling facilities needed to assess and improve understanding of local-, regional-, and national-scale hydrologic and socioeconomic effects resulting from water extraction for bottling. Beverage types coded in the North American Industry Classification System under subsector 312 (Beverage and Tobacco Product Manufacturing) were compiled; however, facility information was often not publicly available, time intensive to search manually, and difficult to verify because there are no nationally available facility lists. A separate evaluation of facilities in the Great Lakes region identified some facilities that were missing and some with incorrect information. Ancillary facility attributes were primarily available from a proprietary business dataset and water-use data could only be acquired for a small subset of facilities. These limitations and deficiencies may affect the types of analyses that can be done using the inventory information. Therefore, the following data-quality aspects are used to describe the information compiled in the facility and water-use tables: completeness, uniqueness, validity, timeliness, accuracy, consistency, and accessibility. The resulting implications of the data and knowledge gaps are that users of the data may need to make additional evaluations of the inventory information for some analyses.
- Open Access
- 1 January 2022
- Published by US Geological Survey
Analysis of groundwater and surface water in areas of isoxaflutole application, Tuscola and Kalamazoo Counties, Michigan
The herbicide 5-cyclopropyl-4-(2-methylsulfonyl-4-trifluoromethylbenzoyl) isoxazole, also known as isoxaflutole (IXF), was conditionally approved for use on corn in Michigan in 2015. The fate of IXF and its degradates in different environmental settings and the processes by which these compounds move to groundwater or to surface-water bodies have been previously studied, but little information about possible persistence and buildup of this herbicide and its degradates in Michigan’s groundwater and surface water is available. Therefore, from 2015 to 2020, the U.S. Geological Survey, in cooperation with the Michigan Department of Agriculture and Rural Development, studied IXF and two of its degradates in two locations where IXF was applied.IXF and its degradates were rarely detected in shallow groundwater downgradient from IXF applications. In contrast, one or more of the three target IXF compounds were detected in 40 percent of surface-water samples. The degradates 1-(2-methylsulfonyl-4-trifluoromethylphenyl)-2-cyano-3-cyclopropyl propan-1-dione), also known as diketonitrile isoxaflutole (DKN), and 2-methylsulfonyl-4-(trifluoromethyl) benzoic acid (BAA), the benzoic acid analogue of IXF, were detected more frequently than the parent compound. At surface-water sites, DKN and BAA reached maximum concentrations within about the first 5 weeks after IXF application after rainfall-runoff events. Concentrations subsequent to post-application maxima decreased through time approximately following first-order, exponential loss kinetics. Carryover of DKN and BAA, from an application year to the following spring, occurred at several surface-water sites, and springtime concentrations were typically 1–5 percent of maximum, post-application concentrations. Virtually no detections were recorded later in the growing season during non-application years. Results indicate rapid loss of IXF and very few detections of the parent compound from the study areas. The degradates DKN and BAA were more frequently detected in surface runoff up to about 1 year after IXF application, but no evidence of longer-term accumulation was found.
- 1 January 2022
- Published by US Geological Survey
Open AccessAnalysis of groundwater and surface water in areas of isoxaflutole application, Tuscola and Kalamazoo Counties, Michigan
The herbicide 5-cyclopropyl-4-(2-methylsulfonyl-4-trifluoromethylbenzoyl) isoxazole, also known as isoxaflutole (IXF), was conditionally approved for use on corn in Michigan in 2015. The fate of IXF and its degradates in different environmental settings and the processes by which these compounds move to groundwater or to surface-water bodies have been previously studied, but little information about possible persistence and buildup of this herbicide and its degradates in Michigan’s groundwater and surface water is available. Therefore, from 2015 to 2020, the U.S. Geological Survey, in cooperation with the Michigan Department of Agriculture and Rural Development, studied IXF and two of its degradates in two locations where IXF was applied.IXF and its degradates were rarely detected in shallow groundwater downgradient from IXF applications. In contrast, one or more of the three target IXF compounds were detected in 40 percent of surface-water samples. The degradates 1-(2-methylsulfonyl-4-trifluoromethylphenyl)-2-cyano-3-cyclopropyl propan-1-dione), also known as diketonitrile isoxaflutole (DKN), and 2-methylsulfonyl-4-(trifluoromethyl) benzoic acid (BAA), the benzoic acid analogue of IXF, were detected more frequently than the parent compound. At surface-water sites, DKN and BAA reached maximum concentrations within about the first 5 weeks after IXF application after rainfall-runoff events. Concentrations subsequent to post-application maxima decreased through time approximately following first-order, exponential loss kinetics. Carryover of DKN and BAA, from an application year to the following spring, occurred at several surface-water sites, and springtime concentrations were typically 1–5 percent of maximum, post-application concentrations. Virtually no detections were recorded later in the growing season during non-application years. Results indicate rapid loss of IXF and very few detections of the parent compound from the study areas. The degradates DKN and BAA were more frequently detected in surface runoff up to about 1 year after IXF application, but no evidence of longer-term accumulation was found.
- 1 January 2021
- Published by US Geological Survey
Factors affecting uncertainty of public supply, self-supplied domestic, irrigation, and thermoelectric water-use data, 1985–2015—Evaluation of information sources, estimation methods, and data variability
The U.S. Geological Survey (USGS) Water-Use Program is responsible for compiling and disseminating the Nation's water-use data. Working in cooperation with local, State, and Federal agencies, the USGS has collected and published national water-use estimates every 5 years, beginning in 1950. These water-use data may vary because of actual changes in water use, because of changes in estimation methods, or because of errors. Comparison and interpretation of these data is difficult without first determining the factors that contribute to data variability. This report describes factors that may affect data quality and documents ways to investigate the variability of public supply, self-supplied domestic, irrigation, and thermoelectric water-use data for the 1985–2015 compilations.The USGS produces national water-use estimates for various categories of water use for every county in the United States. Knowledge about the sources of data for county estimates is important because factors such as estimation methodology and reporting affect data uncertainty Determination of meaningful patterns and trends in the data are contingent on the use of consistent methodology throughout the period of interest. With the many ways that water-use data have been collected, assembled, and estimated, multiple factors likely contribute to data uncertainty, Data used to produce these estimates may be furnished from agencies that collect information from entities who report water use; gaps in reported data are typically estimated to achieve a comprehensive county estimate. For example, public supply and thermoelectric category data are based primarily on furnished site-specific data; whereas crop irrigation is often furnished or estimated at the county scale. Public supply deliveries for domestic use and self-supplied domestic withdrawals are most often estimated by USGS personnel using per capita use rate coefficients. Irrigation may be estimated using crop water requirements, application rates, or other soil water balance methods when furnished reported data are not available.Rates, percentages, medians, and interquartile ranges were used to investigate variability in the water-use data among States, regions, and years. The purposes of these evaluations were to (1) identify extreme values that may reflect changes in information sources, estimation methods, or errors; (2) indicate areas of variable or consistent values that are unexpected; and (3) indicate areas where values change because of local climate or other factors. Where factors are identified that contribute to data variability, such as a change in methodology, additional work could determine uncertainty because of these factors.These evaluations identified the availability of information that is needed to address data limitations. Factors such as estimation methodology affect data quality. Some updates to method codes assigned in 2015 and assignment of method codes to earlier compilation datasets for all categories would provide much needed metadata for users of the data. Improvements in data documentation describing sources of information and estimation methods and additional metadata information from agencies and entities that furnish water-use data, would enable a more complete understanding and depiction of water-use patterns and trends. Additional metadata are needed for users of the data to better understand the water-use data and interpret changes in water use across the United States and with time.
- 1 January 2021
- Published by US Geological Survey
Factors affecting uncertainty of public supply, self-supplied domestic, irrigation, and thermoelectric water-use data, 1985–2015—Evaluation of information sources, estimation methods, and data variability
The U.S. Geological Survey (USGS) Water-Use Program is responsible for compiling and disseminating the Nation's water-use data. Working in cooperation with local, State, and Federal agencies, the USGS has collected and published national water-use estimates every 5 years, beginning in 1950. These water-use data may vary because of actual changes in water use, because of changes in estimation methods, or because of errors. Comparison and interpretation of these data is difficult without first determining the factors that contribute to data variability. This report describes factors that may affect data quality and documents ways to investigate the variability of public supply, self-supplied domestic, irrigation, and thermoelectric water-use data for the 1985–2015 compilations.The USGS produces national water-use estimates for various categories of water use for every county in the United States. Knowledge about the sources of data for county estimates is important because factors such as estimation methodology and reporting affect data uncertainty Determination of meaningful patterns and trends in the data are contingent on the use of consistent methodology throughout the period of interest. With the many ways that water-use data have been collected, assembled, and estimated, multiple factors likely contribute to data uncertainty, Data used to produce these estimates may be furnished from agencies that collect information from entities who report water use; gaps in reported data are typically estimated to achieve a comprehensive county estimate. For example, public supply and thermoelectric category data are based primarily on furnished site-specific data; whereas crop irrigation is often furnished or estimated at the county scale. Public supply deliveries for domestic use and self-supplied domestic withdrawals are most often estimated by USGS personnel using per capita use rate coefficients. Irrigation may be estimated using crop water requirements, application rates, or other soil water balance methods when furnished reported data are not available.Rates, percentages, medians, and interquartile ranges were used to investigate variability in the water-use data among States, regions, and years. The purposes of these evaluations were to (1) identify extreme values that may reflect changes in information sources, estimation methods, or errors; (2) indicate areas of variable or consistent values that are unexpected; and (3) indicate areas where values change because of local climate or other factors. Where factors are identified that contribute to data variability, such as a change in methodology, additional work could determine uncertainty because of these factors.These evaluations identified the availability of information that is needed to address data limitations. Factors such as estimation methodology affect data quality. Some updates to method codes assigned in 2015 and assignment of method codes to earlier compilation datasets for all categories would provide much needed metadata for users of the data. Improvements in data documentation describing sources of information and estimation methods and additional metadata information from agencies and entities that furnish water-use data, would enable a more complete understanding and depiction of water-use patterns and trends. Additional metadata are needed for users of the data to better understand the water-use data and interpret changes in water use across the United States and with time.
- Open Access
- 1 January 2018
- Published by US Geological Survey
Delineation of contributing areas for 2017 pumping conditions to selected wells in Ingham County, Michigan
First posted October 1, 2018 Director, Upper Midwest Water Science Center U.S. Geological Survey 6520 Mercantile Way Suite 5 Lansing, MI 48911 As part of local wellhead protection area programs, areas contributing water to production wells need to be periodically updated because groundwater-flow paths depend in part on the stresses to the groundwater-flow system. A steady-state groundwater-flow model that was constructed in 2009 was updated to reflect recent (2017) pumping conditions in the Lansing and East Lansing area in the Tri-County region, Michigan. For this current (2017) study, withdrawals from selected production wells were updated, and the existing model calibration under the new pumping conditions was checked. Results of flow simulations indicate that 10-year time-of-travel areas cover approximately 25 square miles and 40-year time-oftravel areas cover approximately 51 square miles.
- 1 January 2018
- Published by US Geological Survey
Open AccessDelineation of contributing areas for 2017 pumping conditions to selected wells in Ingham County, Michigan
First posted October 1, 2018 Director, Upper Midwest Water Science Center U.S. Geological Survey 6520 Mercantile Way Suite 5 Lansing, MI 48911 As part of local wellhead protection area programs, areas contributing water to production wells need to be periodically updated because groundwater-flow paths depend in part on the stresses to the groundwater-flow system. A steady-state groundwater-flow model that was constructed in 2009 was updated to reflect recent (2017) pumping conditions in the Lansing and East Lansing area in the Tri-County region, Michigan. For this current (2017) study, withdrawals from selected production wells were updated, and the existing model calibration under the new pumping conditions was checked. Results of flow simulations indicate that 10-year time-of-travel areas cover approximately 25 square miles and 40-year time-oftravel areas cover approximately 51 square miles.