Martín Francisco Jiménez Moreno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Martín Francisco Jiménez Moreno has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Sergio O. Martinez-Chapa
School of Engineering and Sciences Tecnologico de Monterrey Monterrey NL 64849 Mexico
5 shared publications - Marc Madou
Mechanical and Aerospace Engineering, University of California, Irvine, USA
3 shared publications - Mohammad Mahdi Aeinehvand
Tecnológico de Monterrey
2 shared publications - Aida Rodriguez-Garcia
Tecnológico de Monterrey, Mexico; Universidad Autónoma de Nuevo León, Mexico
1 shared publication Alan Aguirre‐Soto
School of Engineering and Sciences Tecnologico de Monterrey Monterrey NL 64849 Mexico
1 shared publicationAlejandro Lujambio Ángeles
School of Engineering and Sciences Tecnologico de Monterrey Av. Eugenio Garza Sada 2501 Sur Monterrey NL 64849 Mexico
1 shared publication
Latest Publications
- Open Access
- 27 November 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 11 (2)
Mechanistic Analysis and Control of Electro‐Fabrication with Soft Matter: Polysaccharide Self‐Assembly with Electrochemically Produced Metal Ions
Electro‐fabrication is an emerging additive manufacturing approach that includes a variety of mechanisms and crosslinking chemistries to induce the self‐assembly‐ of soft matter. Within electro‐fabrication techniques, anodic electro‐fabrication is of great interest, because it can use the electrode as a sacrificial source of metal ions for the controlled formation of chelated hydrogels. However, it remains challenging to understand how the various solution conditions (e.g., buffer capacity, ligands) and imposed voltages must be controlled to achieve the chelation and sol‐gel transition. Herein, a comprehensive thermodynamics‐based framework is built to guide the selection of conditions for the self ‐assembly of polysaccharide hydrogels by crosslinking with transition metal ions generated via corrosion. This methodology is demonstrated through real‐time spectro‐electrochemical monitoring and employed for the electro‐fabrication of chitosan hydrogels chelated with Au3+, Ag+, Cu2+, and Pd2+, and alginate hydrogels chelated with Cu2+. The presented guidelines are intended to extend the capabilities of the controlled fabrication of assemblies crosslinked with metal ions, opening new horizons for unprecedented materials design with precisely tailored structures and functions.
- 27 November 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 11 (2)
Open AccessMechanistic Analysis and Control of Electro‐Fabrication with Soft Matter: Polysaccharide Self‐Assembly with Electrochemically Produced Metal Ions
Electro‐fabrication is an emerging additive manufacturing approach that includes a variety of mechanisms and crosslinking chemistries to induce the self‐assembly‐ of soft matter. Within electro‐fabrication techniques, anodic electro‐fabrication is of great interest, because it can use the electrode as a sacrificial source of metal ions for the controlled formation of chelated hydrogels. However, it remains challenging to understand how the various solution conditions (e.g., buffer capacity, ligands) and imposed voltages must be controlled to achieve the chelation and sol‐gel transition. Herein, a comprehensive thermodynamics‐based framework is built to guide the selection of conditions for the self ‐assembly of polysaccharide hydrogels by crosslinking with transition metal ions generated via corrosion. This methodology is demonstrated through real‐time spectro‐electrochemical monitoring and employed for the electro‐fabrication of chitosan hydrogels chelated with Au3+, Ag+, Cu2+, and Pd2+, and alginate hydrogels chelated with Cu2+. The presented guidelines are intended to extend the capabilities of the controlled fabrication of assemblies crosslinked with metal ions, opening new horizons for unprecedented materials design with precisely tailored structures and functions.
- 19 April 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (11)
Nano‐spaced Gold on Glassy Carbon Substrate for Controlling Cell Behavior
This approach involves the synthesis of gold nanoparticles (GNPs) within the carbonizing photoresist (SU8) to achieve GNPs trapped glassy carbon (GNPs‐GC) substrates. Surface size distribution and interparticle separation of GNPs is primarily controlled by changing the metal precursor concentration. Chemical stability and fabrication control are achieved by selecting sodium tetrachloroaurate (NaAuCl4) over a more conventional aurochloric acid (HAuCl4) as the gold precursor. Seeding of gold nuclei in a photocrosslinking polymer is a classical representation of simultaneous homogeneous and heterogeneous nucleation. GNPs growth during the carbonization process is tracked and explained using pertinent mechanisms. With the nanoparticle spacing ranging from 260 to 50 nm, GNPs‐GC thin films are employed as interfaces for fibroblast cell adhesion. GNPs act as potential anchor points for cell adhesion and their nanoscale arrangement regulates the structural behavior of the cells. GNPs' density‐dependent fibronectin physisorption significantly improves cell adhesion and proliferation. Intraparticle spacing around 160 nm offers ideal biointerface for fibroblast attachment and spreading. Fabrication of 3D GNPs composite carbon microelectromechanical systems is achieved as a demonstration of the studied GNPs‐GC synthesis mechanism. Sub‐micron patterning of GNPs‐GC combined with its biofunctional nature presents vast opportunities in the field of bioelectronics, biophotonics, and lab/organ‐on‐a‐chip technology.
- 19 April 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (11)
Nano‐spaced Gold on Glassy Carbon Substrate for Controlling Cell Behavior
This approach involves the synthesis of gold nanoparticles (GNPs) within the carbonizing photoresist (SU8) to achieve GNPs trapped glassy carbon (GNPs‐GC) substrates. Surface size distribution and interparticle separation of GNPs is primarily controlled by changing the metal precursor concentration. Chemical stability and fabrication control are achieved by selecting sodium tetrachloroaurate (NaAuCl4) over a more conventional aurochloric acid (HAuCl4) as the gold precursor. Seeding of gold nuclei in a photocrosslinking polymer is a classical representation of simultaneous homogeneous and heterogeneous nucleation. GNPs growth during the carbonization process is tracked and explained using pertinent mechanisms. With the nanoparticle spacing ranging from 260 to 50 nm, GNPs‐GC thin films are employed as interfaces for fibroblast cell adhesion. GNPs act as potential anchor points for cell adhesion and their nanoscale arrangement regulates the structural behavior of the cells. GNPs' density‐dependent fibronectin physisorption significantly improves cell adhesion and proliferation. Intraparticle spacing around 160 nm offers ideal biointerface for fibroblast attachment and spreading. Fabrication of 3D GNPs composite carbon microelectromechanical systems is achieved as a demonstration of the studied GNPs‐GC synthesis mechanism. Sub‐micron patterning of GNPs‐GC combined with its biofunctional nature presents vast opportunities in the field of bioelectronics, biophotonics, and lab/organ‐on‐a‐chip technology.
- 11 February 2019
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 19 (6) , 1090-1100
Elastic reversible valves on centrifugal microfluidic platforms
We developed and modeled tunable reversible valves on microfluidic discs, and employed them to automate a multiplexed immunoassay with peptide microarrays.
- 11 February 2019
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 19 (6) , 1090-1100
Elastic reversible valves on centrifugal microfluidic platforms
We developed and modeled tunable reversible valves on microfluidic discs, and employed them to automate a multiplexed immunoassay with peptide microarrays.
- 1 December 2018
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 276, 429-436
Aluminium valving and magneto-balloon mixing for rapid prediction of septic shock on centrifugal microfluidic platforms
- 1 December 2018
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 276, 429-436
Aluminium valving and magneto-balloon mixing for rapid prediction of septic shock on centrifugal microfluidic platforms
- Open Access
Polymethacrylate Coated Electrospun PHB Fibers as a Functionalized Platform for Bio-Diagnostics: Confirmation Analysis on the Presence of Immobilized IgG Antibodies against Dengue Virus
In this article, a combination of far field electrospinning (FFES) and free-radical polymerization has been used to create a unique platform for protein immobilization via the physical attachment of biomolecules to the surface of the fiber mats. The large specific surface area of the fibers with its tailored chemistry provides a desirable platform for effective analyte-surface interaction. The detailed analysis of protein immobilization on a newly developed bio-receptive surface plays a vital role to gauge its advantages in bio-diagnostic applications. We relied on scanning electron microscopy (SEM), diameter range analysis, and X-ray photoelectron spectroscopy (XPS), along with thermal gravimetric analysis (TGA), water-in-air contact angle analysis (WCA), Fourier transform infrared spectroscopy (FTIR), and atomic force microscopy (AFM) to study our developed platforms and to provide valuable information regarding the presence of biomolecular entities on the surface. Detailed analyses of the fiber mats before and after antibody immobilization have shown obvious changes on the surface of the bioreceptive surface including: (i) an additional peak corresponding to the presence of an antibody in TGA analysis; (ii) extra FTIR peaks corresponding to the presence of antibodies on the coated fiber platforms; and (iii) a clear alteration in surface roughness recorded by AFM analysis. Confirmation analyses on protein immobilization are of great importance as they underlay substantial grounds for various biosensing applications.
Open AccessPolymethacrylate Coated Electrospun PHB Fibers as a Functionalized Platform for Bio-Diagnostics: Confirmation Analysis on the Presence of Immobilized IgG Antibodies against Dengue Virus
In this article, a combination of far field electrospinning (FFES) and free-radical polymerization has been used to create a unique platform for protein immobilization via the physical attachment of biomolecules to the surface of the fiber mats. The large specific surface area of the fibers with its tailored chemistry provides a desirable platform for effective analyte-surface interaction. The detailed analysis of protein immobilization on a newly developed bio-receptive surface plays a vital role to gauge its advantages in bio-diagnostic applications. We relied on scanning electron microscopy (SEM), diameter range analysis, and X-ray photoelectron spectroscopy (XPS), along with thermal gravimetric analysis (TGA), water-in-air contact angle analysis (WCA), Fourier transform infrared spectroscopy (FTIR), and atomic force microscopy (AFM) to study our developed platforms and to provide valuable information regarding the presence of biomolecular entities on the surface. Detailed analyses of the fiber mats before and after antibody immobilization have shown obvious changes on the surface of the bioreceptive surface including: (i) an additional peak corresponding to the presence of an antibody in TGA analysis; (ii) extra FTIR peaks corresponding to the presence of antibodies on the coated fiber platforms; and (iii) a clear alteration in surface roughness recorded by AFM analysis. Confirmation analyses on protein immobilization are of great importance as they underlay substantial grounds for various biosensing applications.