LTLidiya Ungarbaevna Taimuratova

Lidiya Ungarbaevna Taimuratova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lidiya Ungarbaevna Taimuratova has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Developing the Methodological Competence of Future IT Engineers in the Republic of Kazakhstan Through Problem-Oriented Learning

    by Nazym Sabitova, Valerii Lakhno, Aru Ukenova, Lidiya Taimuratova, Volodymyr Matiievskyi

    Kazakhstan’s transition toward Industry 4.0 and 5.0 increases demand for IT professionals capable of solving complex engineering problems. This study theoretically substantiated and empirically evaluated a didactic model for developing future IT engineers’ methodological competence through systemic problem-oriented learning. A quasi-experimental study involved 150 undergraduates from four Kazakhstani universities. In an integrated Smart Campus environment, students addressed authentic, industry-informed problems through an approach combining Challenge-Based Learning with the Four-Component Instructional Design model. Tasks included designing critical information infrastructure with provision for post-quantum cryptography and developing an intelligent energy-management system using fuzzy logic and the NSGA-III and MOEA/D algorithms. Performance on two engineering cases was independently evaluated using a 0–100 analytical rubric; scores were examined using the Shapiro–Wilk test, independent-samples Student’s t-tests, and Cohen’s d. The experimental group outperformed the control group in Case 1 (79.36 vs. 70.33; p = 0.003; d = 0.50) and Case 2 (80.61 vs. 71.12; p = 0.002; d = 0.53). Analysis of 45 reflective essays and 12 interviews indicated changes in methodological decision making, attitudes toward uncertainty, and perceived professional relevance. The findings support integrating authentic challenges with structured complex-learning design, while the Quadruple Helix provides an institutional framework connecting universities, industry, government, and society.

  • Pre-service physics teachers’ efficacy in using digital technologies for teaching optics

    by Ulbosyn A. Abitayeva, Aliya Kh. Sarybayeva, Aigul A. Almagambetova, Dina M. Zharylgapova, Indira B. Usembayeva, Lidiya U. Taimuratova

    The main purpose of this study is to examine pre-service physics teachers’ competencies in integrating digital technologies into the teaching of optics topics. In the study in which the quantitative research method was adopted, data were collected from 356 physics teacher candidates through ICT-TPACK-science scale, optical teaching self-efficacy scale and digital technology use scale in physics. Descriptive statistics, independent groups t-test, one-way ANOVA, Pearson correlation analysis and multiple linear regression analysis were used in the analysis of the data. The research findings showed that the technological pedagogical content knowledge (TPACK) levels of the physics teacher candidates were high, and their self-efficacy beliefs in optical teaching and their digital technology use levels were at medium levels. Male teacher candidates achieved significantly higher scores than women in some sub-dimensions of TPACK. It was determined that digital technology usage experience had a strong and significant effect on TPACK levels, optical self-efficacy beliefs and digital technology use. The correlation analysis results revealed that there were positive, medium and high significant relationships between the three variables. Regression analysis showed that optical self-efficacy beliefs and digital technology use together explained 47% of the variance in TPACK levels. In addition, pre-service teachers were grouped into three groups in terms of technology integration. The findings revealed that digital technology experience and field teaching self-efficacy were critical factors in the development of TPACK by pre-service physics teachers. This study contributes to physics education by providing insights into how pre-service teachers’ technological competencies and self-efficacy beliefs interact in the context of optics teaching, thereby informing teacher education programs about effective strategies for integrating technology into physics instruction. The research offers important implications that technology integration and field teaching self-efficacy should be developed with a holistic approach in teacher training programs.

  • FORMATION OF ACTIVE THINKING SKILLS USING PROGRAMMABLE LEARNING TECHNOLOGY IN PHYSICS LESSONS

    by L.U. Taimuratova, U. Nagymova

    Бұл мақалада физика сабақтарында бағдарламаланған оқыту технологиясын қолданудың ерекшеліктері мен оның оқушылардың белсенді ойлау дағдыларын қалыптастырудағы маңызы қарастырылады. Бағдарламаланған оқыту әдісі білім алушылардың жеке қарқынына сәйкес оқу материалын жүйелі түрде меңгерілуін қамтамасыз етіп, оқыту процесінде кері байланыс орнатуға мүмкіндік береді. Білім беру процесінде бағдарламаланған оқыту технологиясын қолдану оқытушының рөлін түбегейлі өзгертеді: ол енді тек білім жеткізуші емес, оқушылардың оқу әрекетін ұйымдастырушы, олардың жеке оқу траекториясын бағыттаушы, әр оқушының қабілеті мен қарқынын ескеретін кеңесші әрі серіктес ретінде қызмет етеді. Мұндай жағдай мұғалім мен оқушы арасындағы педагогикалық қарым-қатынастың жаңа үлгісін қалыптастырады, мұнда оқушылардың дербестігі, жауапкершілігі мен белсенділігі артады, ал мұғалім оқушылардың ойлауын дамытуға ықпал ететін әдістемелік құралдарды шебер қолдана білуі тиіс. Зерттеу барысында бағдарламаланған тапсырмалар мен модульдік құрылымдағы сабақ үлгілері талданды, олардың оқушылардың пәнге деген қызығушылығын арттыруға, сыни және логикалық ойлау қабілеттерін дамытуға ықпал ететіні көрсетілді. Мақаланың практикалық бөлімінде бағдарламаланған оқыту әдісін қолдану арқылы физика курсының мазмұнын тиімді меңгертуге арналған әдістемелік ұсыныстары берілген.

  • Open Access

    Modification of the ontology using the teacher’s personal materials to increase the degree of automation of EC preparation

    by Nazym Sabitova, Yuriy Tikhonov, Valerii Lakhno, Rosamgul Niyazova, Bibigul Razakhova, Sholpan Zholdasova, Tleugaisha Ospanova, Lidiya Taimuratova

    The object of the research is the technology of constructing a computer ontology (CO) for electronic textbooks of the subject area (KSA). As an example, the industry is considered-information and communication technologies (ICT) and the topic "databases". The subject of the study are models and methods of automated construction of a CO of the KSA. The methodology of modification of CO in the field of ICT is proposed by introducing into the formal computer ontology a description of the technologies of the learning process for secondary schools or extracurricular institutions, as well as for professional retraining of specialists, which allows preserving and reusing the collective experience of learning in an educational institution. The proposed solution differs from the existing ones in that the system of ontologized design of electronic courses (SODEC). It allows to automate the development of electronic courses (EC) and / or electronic textbooks (ET), reduces the cost and time of preparing ET, ensures compliance of EC with the current state in the field of ICT. As an example, the design section of ET for the topic "databases" is considered. The proposed solution allows to accumulate personal materials of the teacher and contributes to the rapid updating of the content and content of ET, if necessary. It is concluded that for more effective use of the proposed methodology, it is necessary to develop a similar SODEC, taking into account the language of description of CO – OWL, which will allow to accumulate collective experience in the methods of submitting material to teachers of educational institutions or extracurricular institutions, as well as during professional retraining of specialists

  • Open Access

    Solar-Powered Water Electrolysis Using Hybrid Solid Oxide Electrolyzer Cell (SOEC) for Green Hydrogen—A Review

    by Shammya Afroze, Amal Najeebah Shalihah Binti Sofri, Sumon Reza, Zhanar Baktybaevna Iskakova, Asset Kabyshev, Kairat A. Kuterbekov, Kenzhebatyr Z. Bekmyrza, Lidiya Taimuratova, Mohammad Rakib Uddin, Abul K. Azad

    The depletion of fossil fuels in the current world has been a major concern due to their role as a primary source of energy for many countries. As non-renewable sources continue to deplete, there is a need for more research and initiatives to reduce reliance on these sources and explore better alternatives, such as renewable energy. Hydrogen is one of the most intriguing energy sources for producing power from fuel cells and heat engines without releasing carbon dioxide or other pollutants. The production of hydrogen via the electrolysis of water using renewable energy sources, such as solar energy, is one of the possible uses for solid oxide electrolysis cells (SOECs). SOECs can be classified as either oxygen-ion conducting or proton-conducting, depending on the electrolyte materials used. This article aims to highlight broad and important aspects of the hybrid SOEC-based solar hydrogen-generating technology, which utilizes a mixed-ion conductor capable of transporting both oxygen ions and protons simultaneously. In addition to providing useful information on the technological efficiency of hydrogen production in SOEC, this review aims to make hydrogen production more efficient than any other water electrolysis system.


  • VIRTUAL EXPERIMENTS IN PHYSICS

    by L.U. Taimuratova, D.Zh. Zhunisov

    Бұл мақалада білім беру жүйесіндегі физика пәніне арналған виртуалды эксперименттер жайында туралы түсінік берілген. Қазіргі таңда, технологиялар дамыған заманда педагог үшін сабақ беру барысын жүйелеу,тақырыпты ашу және сабақты ерекше етіп өткізу маңызды.Соның ішінде табиғат туралы тереңінен зерттейтін физика пәнін оқытуда виртуалды эксперименттерді қолдану оқушыға жан-жақты білім берудің төте жолы болмақ. Заманауи педагогикалық технологиялар білім берудің жаңа саласы болып қалыптасып келеді. Қазіргі инновациялық процесстің негізі – тың идеяларды қалыптастыру, оларды қолдана отырып жүзеге асыруды баса назарға алады. Білім беру жүйесіндегі басты мақсат оқушының жеке қабілетін арттыру,ғылыми белсенділігін дамыту және шығармашылыққа деген ынталарын қалыптастыру. Жаратылыстану бағытындағы пәндерді оқытуда оқушыларға демонстрация жасай отырып тақырыпты түсіндірген өте оңтайлы әдіс болады. Оқушыларға тақырыпты, аталған заңды немесе жүріп жатқан процессті жеткізу оқытушының басты мақсат-міндеті. Осы тұста мәселенің бірден-бір шешімі - виртуалды эксперименттер. Виртуалды эксперименттер баланың тек пән бойынша білімін арттырады деп кесіп айту қиын. Себебі виртуалды эксперименттермен жұмыс жасау барысында оқушының ақпараттық құзіреттілігі қалыптасады, ақпараттық технологиялармен жұмыс істеу қабілеті артады, сабақтан тыс уақытта өз бетінше білім алуға қызығады және өзіне кәсіби бағыт-бағдар алады

  • Longitudinal magnetoresistance of uniaxially deformed n-type silicon

    by O.D. Bigozha, A.ZH. Seitmuratov, L.U. Taimuratova, B.K. Kazbekova, Z.K. Aimaganbetova

    The study of Galvano-magnetic effects (as well as tensoeffects) in silicon under extreme conditions allows not only to identify the mechanisms of these effects but also to identify the possibility of creating gaussmeters, infrared detectors, sensitive strain gauges, amplifiers and generators of a wide frequency range. The reliability of the mechanism of negative magnetoresistance was verified using uniaxial elastic deformation of the studied crystals. Uniaxial deformation excludes interline transitions of electrons, as a result of which negative magnetoresistance disappears with an increase in uniaxial pressure. When cubic symmetry is violated, anisotropic phenomena occur in such crystals. The multipath of the isoenergetic surface of the bottom of the silicon conduction band causes anisotropies of the effective mass and relaxation time, which are associated with the features of the transfer phenomenon. In particular, magnetoresistance (piezoresistance), which is the most sensitive to the anisotropy of the iso energy surface. The influence of the latter on magnetoresistance is most clearly revealed in the region of strong magnetic fields, where the magnetoresistance is saturated since the longitudinal magnetoresistance is entirely due to the anisotropy of electron mobility.

  • STUDY OF THE MAGNETO-RESISTANCE SILICON P-TYPE

    by Caspian state University of technology and engineering named after Sh. Esenov, L.U. Taimuratova

    The study of galvanomagnetic phenomena in silicon, in strong magnetic fields, is associated with great difficulties due to the high resistance of the samples and the complexity of preparing omics contacts that work well in a wide range of temperatures and magnetic fields. Therefore, until now, all existing data on galvanomagnetic effects in silicon have been obtained only in the region of weak magnetic fields. Given the growing interest in silicon due to its large potential, it seemed appropriate to study the galvanomagnetic effects in the region of strong magnetic fields, where quantum effects play the dominant role. The study of Galvano-magnetic effects (as well as tensoeffects) in silicon under extreme conditions allows not only to identify the mechanisms of these effects, but also to identify the possibility of creating gaussmeters, infrared detectors, sensitive strain gauges, amplifiers and generators of a wide frequency range. Keywords: galvano-magnetic effects, silicon, negative magnetoresistance, uniaxial pressure.

  • Open Access

    Приближённые уравнения колебаний цилиндрических оболочек переменной толщины

    by M. I. Ramazanov, A. Zh. Seitmuratov, L. U. Taimuratova, N. K. Medeubaev, G. I. Mukeeva

    To date, a huge number of studies have been carried out to bring a three-dimensional problemto a two-dimensional one by engineering and mathematical methods. But these studies do notexhaust the problem completely. The solution of this problem for bodies with different geometriescontinues today, as evidenced by the publications of domestic, Russian and foreign scientists.Adjacent to them is the problem of studying the dynamic behavior of circular rods interacting withthe deformable medium on the basis of oscillation equations derived using a rigorous mathematicalapparatus. Approximate equations of oscillation of rod systems above the second order with respectto the derivatives of the desired function and the theory of oscillations of a circular cylindricalshell, in particular torsional oscillations, taking into account the inertion of rotation and thestrain of the transverse shear, are devoted to a relatively small number of scientific publications.The approximate equations of rod systems of variable thickness presented in this paper allow usto construct approximate theories of oscillation depending on the conditions at the ends of therod, on the order of the derivatives sought in the approximate equations and initial conditions.The results obtained make it possible to formulate boundary value problems in solving particularproblems of oscillations of a cylindrical shell under various conditions at the end of the shell Қазiргi таңда үшөлшемдi есептi екi өлшемдi инженерлiк және математикалық әдiстер дейiнетүсiрiп есептеп шешу бағытында қөптеген зерттеу ұмыстары жүргiзiлiп келедi. Бiрақ бұлзерттеулер мәселенi толығымен шеше алмайды. Әр түрлi геометрия жағдайындағы денелерүшiн бұл мәселенi шешу бүгiнгi күнге дейiн жалғасуда, оны отандық, ресейлiк және шетелдiкғалымдардың жарияланымдары дәлелдейдi. Осыған қоса - қатаң математикалық аппараттықолдану арқылы берiлген тербелiс теңдеулерi негiзiнде деформацияланатын ортамен әрекет-тесетiн дөңгелек қабықшалардың динамикалық мiнез-құлқын зерттеу жұмысы да жатады.Берiлген функция туынсы екiншi реттiден жоғары және дөңгелек цилиндрлiк қабықтың тер-белiс теориясына қатысты жүйелерiнiң тербелiс теңдеуiн жуық түрi, атап айтқанда айналуинерциясы мен көлденең ығысу, бұралуының тербелiс жағдайларының мәселелерi ғылымибасылымдарда жариалануы өте аз. Осы мақалада келтiрiлген қалындығы өзгермелi цилин-дрлiк қабықшаның жуық тербелiс теңдеулерi бiзге тербелiстердiң жуық теориясын, соныменқатар жуық теңдеу мен бастапқы шарттарды қанағаттандыратын жағдайын құруға мүмкiн-дiк бередi. Алынған нәтижелер цилиндрлiк қабықтың тербелiстерiнiң белгiлi бiр есептерiншешуде және шеттiк есептерге тұжырым жасауға мүмкiндiк бередi. К настоящему времени выполнено огромное число исследований по приведению трехмернойзадачи к двухмерной инженерными и математическими методами. Но эти исследования неисчерпывают проблему полностью. Решение этой проблемы для тел с различной геометриейпродолжается и в наши дни, о чем свидетельствуют публикации отечественных, российских изарубежных ученых. К ним примыкает и проблема изучения динамического поведения кру-говых стрежней, взаимодействующих с деформируемой среды на основе уравнений колеба-ний, выведенных с помощью строгого математического аппарата. Приближённые уравненияколебаний стержневых систем выше второго порядка по производным от искомой функ-ции и теории колебаний круглой цилиндрической оболочки, в частности крутильных колеба-ний, с учетом инерции вращения и деформации поперечного сдвига посвящено сравнительнонебольшое число научных публикаций. Приведённые в данной работе приближённые урав-нения стержневых систем переменной толщины позволяют строить приближённые теорииколебания в зависимости от условий на торцах стержня, от порядка производных, искомых вприближённых уравнениях и начальных условиях. Полученные результаты позволяют фор-мулировать краевые задачи при решении частных задач...