ARAaron James Rowane

Aaron James Rowane

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aaron James Rowane has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Speed of Sound Measurements of n -Dodecane, 2,2,4,4,6,8,8-Heptamethylnonane, and Toluene

    by Katrina N. Avery, Aaron J. Rowane

    Speed of sound data measured using a dual-path pulse-echo instrument are reported for n-dodecane, 2,2,4,4,6,8,8-heptamethylnonane (isocetane), and toluene. These data are reported at temperatures ranging from 230 to 420 K and at pressures up to 49.7 MPa. The combined expanded uncertainty in the speed of sound varies from 0.032 to 0.048% of the measured speed of sound value, which is both fluid- and state-point-dependent. The data for n-dodecane and toluene are compared with the present reference equations of state (EOSs) included in REFPROP version 10.0. These comparisons show that the data reported in this study agree with both of the reference EOSs within their stated uncertainties. No reference EOS is available for isocetane. Therefore, a preliminary EOS was obtained by using the fitting tools available in ThermoData Engine. The preliminary EOS for isocetane provides comparable performance to those of toluene and n-dodecane in reproducing the speed of sound values. Comparisons to these EOSs will be used to inform the development of a surrogate mixture model for alternative aviation fuels.

  • Open Access

    Liquid-Phase Speed of Sound Measurements of Octafluorocyclobutane (RC-318) and Hexafluoroethane (R-116)

    by Aaron J. Rowane, Katrina N. Avery

    Sound speed data measured using a dual-path pulse-echo instrument are reported for octafluorocyclobutane (RC-318) at temperatures ranging from 240 to 390 K and at pressures up to 49.01 MPa, and for hexafluoroethane (R-116) at temperatures ranging from 230 to 320 K and at pressures up to 50.27 MPa. The combined expanded uncertainty in the speed of sound varies from 0.035% to 0.102% for RC-318 and 0.039% to 0.097% for R-116 of the measured speed of sound value. The data reported in the present study and those available in the literature are compared to reference equations of state (EOS) for RC-318 and R-116 included in REFPROP version 10.0. The overall performance of both EOS is characterized by an average absolute relative deviation and the maximum deviation. The RC-318 EOS compared to the reported sound speed data with an absolute average relative deviation of 0.56% and a maximum deviation of 1.62%. The R-116 EOS compared to the reported sound speed data with an absolute average relative deviation of 4.85% and a maximum deviation of 6.35%. In both cases, these comparisons show that a refitting of both EOS is required to accurately reproduce the liquid-phase speed of sound for RC-318 and R-116.

  • Open Access

    Speed of Sound Measurements of Select Ternary Refrigerant Mixtures and Predictions Using Constituent Binary Interaction Parameters

    by Karim S. Al-Barghouti, Katrina N. Avery, Ian H. Bell, Aaron J. Rowane

    The speeds of sound of ternary refrigerant mixtures, namely, R-444A (difluoromethane (R-32)/1,1-difluoroethane (R-152a)/trans-1,3,3,3-tetrafluoropropene (R-1234ze(E)) with respective mass fractions of 0.1194/0.0519/0.8287), R-457B (R-32/2,3,3,3-tetrafluoropropene (R-1234yf)/R-152a with respective mass fractions of 0.3489/0.5495/0.1016), and R-407C (R-32/pentafluoroethane (R-125)/R-152a with respective mass fractions of 0.5178/0.2480/0.2342), were measured using a dual-path pulse-echo technique at temperatures ranging between 230 K and 345 K and pressures between 0.14 MPa and 30 MPa. The standard uncertainties in temperature and pressure were 5 mK and 0.014 MPa, respectively. The average combined expanded uncertainty for all speed of sound data was 0.07%. Greater uncertainties were encountered as the system approached the critical regions where the speed of sound is more sensitive to changes in pressure. The experimental speed of sound data was used to assess the predictive capabilities of default REFPROP v10.0 mixture models with binary interaction parameters fit using mainly vapor–liquid equilibria and/or density data. We quantify the improvements for ternary mixture predictions when using updated binary interaction parameters that included speed of sound data in the fitting procedure. Reductions of 1.64%, 1.50%, and 0.11% in the average absolute deviations for R-444A, R-457B, and a R-125/1234yf/152a (0.3521/0.5465/0.1014 mass composition) mixture, respectively, are obtained with the updated binary interaction parameters. Further improvements to the mixture models could be made by refitting both the pure component equations of state and interaction parameters of certain hydrofluorocarbon binary pairs.

  • Refrigerant properties development R&D :

    by Mark O McLinden, Katrina N Avery, Ala Bazyleva, Ian H Bell, Tara J Fortin, Marcia L Huber, Andrei F Kazakov, Eric W Lemmon, Stephanie L Outcalt, Richard A Perkins, et al.

    The HVAC&R industry is facing the challenge of phasing down the use of the HFC (hydrofluorocarbon) refrigerants. New energy-efficient refrigerants are required, and accurate property data for them are needed to design and operate new HVAC equipment using the new refrigerants. The present work has measured property data on key mixtures among the olefins R-1234yf, R-1234ze(E), R-1130(E), R-1132a, R-1132(E), and R-1336mzz(Z), together with the HFCs R-152a, R-32, and R-227ea. Measurements were also carried out on pure R-1130(E). Included were vapor-liquid equilibrium (VLE) measurements, pressure-density-temperature-composition (p, ρ, T, x) data, and speed of sound. This report summarizes the measurements carried out, describes the experimental techniques used, and gives examples of the results. These data were then used to develop models of the thermodynamic properties; these are expressed in terms of “equations of state” (EOS). In addition to the mixture models, EOS are presented for pure R-1130(E) and R-1132(E). The main output of the project takes the form of the numerical parameters for the pure-fluid and mixture models, which are reported here and in the form of data files for use with the NIST REFPROP database of refrigerant properties. Full details of both the experimental and modeling efforts are given in papers published in archival journals, which are linked in the report. The present work has added important new refrigerants and refrigerant blends to the existing data set. As a result, industry is able to evaluate a wider range of options.

  • Open Access

    Speed of Sound Measurements of Binary Mixtures of trans-1,2-Difluoroethylene (R-1132(E)) with Difluoromethane (R-32) or 2,3,3,3-Tetrafluoropropene (R-1234yf)

    by Aaron J. Rowane, Elizabeth G. Rasmussen

    The speed of sound of two binary mixtures containing 0.336 mole fraction trans-1,2-difluoroethylene (R-1132(E)) with difluoromethane (R-32) and 0.435 mole fraction R-1132(E) with 2,3,3,3-tetrafluoropropene (R-1234yf) was measured with a dual-path pulse-echo instrument. The speed of sound was measured along several pseudoisochores for each blend at temperatures ranging from 230 to 325 K for blends with R-32 and to 342 K for blends with R-1234yf. Measurements started at pressures just above each mixture's bubble point pressure and were limited to 8 MPa to avoid potential disproportionation reactions of R-1132(E). The data were compared to multifluid models incorporating Helmholtz-energy-explicit equations of state (EOS) for each pure fluid. No binary interaction parameters for either the R-1132(E)/32 or R-1132(E)/1234yf system are currently available. Therefore, binary interaction parameters for chemically similar systems suggested by REFPROP version 10.0 were used. Deviations from the measured data to the EOS ranged from 5.5 to 11.0% for the R-1132(E)/32 system and from 0.4 to 1.8% for the R-1132(E)/1234yf system. These data will be used to refit the R-1132(E) EOS and fit mixture models for R-1132(E) blends with R-32 and R-1234yf.


  • Open Access

    Speed of Sound Measurements of Binary Mixtures of 1,1-Difluoroethylene (R-1132a) + Propane and Derived Speed of Sound of Pure R-1132a

    by Aaron J. Rowane, Richard A. Perkins

    Speed of sound data, measured using a dual-path pulse-echo instrument, are reported for three binary mixtures of 1,1-difluoroethylene (R-1132a) with propane at temperatures ranging from 230 to 345 K and pressures ranging from slightly above the bubble curve to a maximum pressure of 50 MPa. Significant attenuation of the pulse-echo signals was observed for measurements on pure R-1132a. Therefore, the R-1132a sample was doped with propane at mole fractions ranging from 0.0274 to 0.0887 and the propane + R-1132a mixture data was used to derive sound speeds for pure R-1132a. The data were compared to a preliminary equation of state for R-1132a, and deviations ranged from 2 % to 8 %. This demonstrates that the preliminary R-1132a EoS needs to be refit to better represent the speed of sound.


  • Open Access

    Speed of Sound Measurements of R-1130(E) and an Azeotropic Blend of R-1336mzz(Z)/1130(E)

    by Aaron J. Rowane

    Sound speed data measured using a dual-path pulse-echo instrument are reported for pure trans-1,2-dichloroethene (R-1130(E)) and an azeotropic blend of cis-1,1,1,4,4,4-hexafluorobutene (R-1336mzz(Z)) and R-1130(E) with a composition of 74.8 mass % R-1336mzz(Z) with the balance being R-1130(E). The azeotropic blend of R-1336mzz(Z)/1130(E) is classified as R-514A in ANSI/ASHRAE standard 34. Liquid phase speed of sound data are reported from just above the saturation pressure of pure R-1130(E) or the bubble point pressure of R-514A to a maximum pressure of 26.7 MPa. The relative combined expanded uncertainty in the speed of sound varies from 0.032 % to 0.148 % with the greatest deviations occurring at the lowest sound speeds. At present, no reference Helmholtz-energy-explicit equation of state (EOS) is available for R-1130(E). Therefore, the reported data for pure R-1130(E) are compared to an extended corresponding states (ECS) model. Deviations between the pure R-1130(E) sound speed data and the ECS model were found to be consistently negative ranging between − 4.1 % and − 3.5 %. The R-514A data are compared to a multifluid model inclusive of the established reference Helmholtz-energy-explicit EOS for R-1336mzz(Z) and ECS model for R-1130(E) with estimated binary interaction parameters. Deviations between the experimental speed of sound data and the multifluid model were also found to be consistently negative. However, deviations from the multifluid model were found to be as great as − 17.1 %. The large deviations from the ECS model and multifluid model underscore the need for a robust Helmholtz-energy-explicit EOS for R-1130(E).


  • Open Access

    Bubble Point Measurements of cis-1,1,1,4,4,4-Hexafluorobutene [R-1336mzz(Z)] + trans-1,2-Dichloroethene [R-1130(E)] mixtures

    by Aaron J. Rowane, Stephanie L. Outcalt

    Saturation pressures of pure R-1336mzz(Z) and R-1130(E) and bubble point pressures of three R-1336mzz(Z)/1130(E) blends were measured from 265 K to 360 K. For each pure refrigerant or refrigerant blend, a total of twenty unique saturation pressures or bubble points were measured. In total 100 unique state points were obtained. Presently, no Helmholtz-energy-explicit type equation of state (EoS) is available for R-1130(E). While an extended corresponding states EoS for R-1130(E) is available to estimate the properties of the R-1336mzz(Z)/1130(E) blend, this model does not resolve the azeotropic behavior of the mixture. Therefore, the perturbed-chain statistical-associating fluid theory (PC-SAFT) EoS is used to model the vapor–liquid equilibria of the R-1336mzz(Z)/1130(E) blend. PC-SAFT model parameters are reported, and the overall performance of the model is characterized by deviations from the experimental data.