MSMarc Sorel

Marc Sorel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Marc Sorel has a total of 79 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Broadband and High-Capacity Silicon Photonics Single-Sideband Modulator

    by Claudio Porzi, Fabio Falconi, Marc Sorel, Antonella Bogoni

    We propose a novel photonic-integrated single-sideband (SSB) modulator realized in silicon on insulator technology operating either in suppressed-carrier or full-carrier mode with continuously tunable carrier-to-sideband ratio (CSBR). Large rejection levels of the spurious sidebands and residual carrier in excess of 40 and 30 dB, respectively, with a CSBR tunability over a $\sim$ 50 dB range, are demonstrated. By employing a single silicon photonics (SiP) phase modulator and a compact and high-performance filtering element, the proposed architecture exhibits a compact layout and tolerates high driving voltage levels, leading to large OSNR values of the modulated sideband in excess of 50 dB. The device supports broadband RF data signals and its operation is tested with an up to 5 Gbps ASK-modulated carrier at 16.5 GHz, limited by available RF equipment. Furthermore, the technique allows to implement a frequency-multiplication mechanism for the input RF carrier, and up to threefold effective bandwidth enhancement of the SiP modulator is obtained by generating an optical SSB signal with a modulated spectral component spaced by 49.5 GHz from the optical carrier. Such features are promising for implementing cost-effective optical distribution of millimeter-wave wireless data signals supporting the evolution of next-generation radio access networks.


  • 10 OAM × 16 Wavelengths Two-Layer Switch Based on an Integrated Mode Multiplexer for 19.2 Tb/s Data Traffic

    by Mirco Scaffardi, Muhammad Nouman Malik, Ning Zhang, Piotr Rydlichowski, Veronica Toccafondo, Charalambos Klitis, Martin Lavery, Jiangbo Zhu, Xinlun Cai, Siyuan Yu, et al.

    A two-layer switch exploiting orbital angular momentum (OAM) and wavelength of the light as switching domains is presented, aiming to increase the scalability with respect to the single-layer switches. The switch is able to accept 160 optical Gaussian data inputs on a 16-channel wavelength division multiplexing (WDM) grid and direct each input signals to different output ports exploiting 10 OAMs. The optical switch is based on an integrated OAM multiplexer followed by a compact OAM demultiplexer consisting of two refractive elements. Its experimental characterization confirmed a total enabled throughput of 19.2 Tb/s, thanks to the 30 GHz bandwidth available for each port. The switching time can be lower than 1 s. The OAM switch power consumption, solely due to the thermal tuning of the OAM emitters, since the OAM demux is passive, is 1.35 mW/Gb/s. In the proposed switching architecture the number of active components, i.e. the power consumption, scales linear with the number of ports. This is favorable in comparison with single-layer switches that cascade e.g. 2x2 elementary blocks to obtain large port counts, which scale with the square of the number of ports. The switch accepts input and output signals with Gaussian phase profile that propagate through optical fibers and waveguides, thus making it compatible with standard telecom devices. The suitability of the switch to support real data-traffic is proved by successfully testing it with 10G Ethernet and Fiber Channel over Ethernet (FCoE) data traffic and video traffic. A possible application scenario is represented by a data-center network where the switch can be used to create a low-power consumption network parallel to the network based on standard electronic routers, to manage large traffic flows.


  • Open Access

    CORNERSTONE’s Silicon Photonics Rapid Prototyping Platforms: Current Status and Future Outlook

    by Callum G. Littlejohns, David J. Rowe, Han Du, Ke Li, Weiwei Zhang, Wei Cao, Thalia Dominguez Bucio, Xingzhao Yan, Mehdi Banakar, Dehn Tran, et al.

    The field of silicon photonics has experienced widespread adoption in the datacoms industry over the past decade, with a plethora of other applications emerging more recently such as light detection and ranging (LIDAR), sensing, quantum photonics, programmable photonics and artificial intelligence. As a result of this, many commercial complementary metal oxide semiconductor (CMOS) foundries have developed open access silicon photonics process lines, enabling the mass production of silicon photonics systems. On the other side of the spectrum, several research labs, typically within universities, have opened up their facilities for small scale prototyping, commonly exploiting e-beam lithography for wafer patterning. Within this ecosystem, there remains a challenge for early stage researchers to progress their novel and innovate designs from the research lab to the commercial foundries because of the lack of compatibility of the processing technologies (e-beam lithography is not an industry tool). The CORNERSTONE rapid-prototyping capability bridges this gap between research and industry by providing a rapid prototyping fabrication line based on deep-UV lithography to enable seamless scaling up of production volumes, whilst also retaining the ability for device level innovation, crucial for researchers, by offering flexibility in its process flows. This review article presents a summary of the current CORNERSTONE capabilities and an outlook for the future.


  • Tunable Orbital Angular Momentum Converter Based on Integrated Multiplexers

    by Muhammad Nouman Malik, Ning Zhang, Veronica Toccafondo, Charalambos Klitis, Martin Lavery, Andrea Sgambelluri, Jiangbo Zhu, Xinlun Cai, Siyuan Yu, Gianni Preve, et al.

    A four-orbital angular momentum (OAM) modes converter consisting of the cascade of an OAM demultiplexer and an OAM multiplexer is implemented and characterized. The OAM multiplexer is realized with an integrated photonic circuit based on four tunable OAM emitters, i.e. the order of the emitted OAM mode can be selected by thermal tuning. It works on linearly polarized signals. The OAM demultiplexer, completely passive, consists of the cascade of two patterned refractive elements followed by a lens and can work independently of the polarization of the input signals. The proposed OAM converter can receive at its input a bundle of spatially multiplexed beams mapped on different OAM modes, each one carrying a set of wavelength division multiplexed (WDM) channels. Each WDM channel can be independently converted to a different OAM mode and all the OAM beams are multiplexed at the converter output. The performance of the proposed scheme is assessed as a function of the order of the OAM beam before and after the conversion, as well as of the wavelength of the input signal. The measurements show a power penalty on the bit error-rate (BER) curves of less than 1 dB in all the considered cases. The scheme is tested also with 100 Gb/s real data-traffic generated with commercial network cards, showing full operability. The cascading ability of the proposed scheme is also investigated in an experiment where the signal to be converted is generated by an OAM multiplexer, i.e. the output stage of the OAM converter, showing a penalty of less than 2 dB. Moreover, considerations on scalability, bandwidth and power consumption are also included along with a possible application of OAM conversion within add/drop nodes in an OAM-wavelength multiplexed transmission scenario.


  • Integrated Silicon-on-Insulator Optical Comb Demultiplexer for Elastic Optical Networks

    by Claudio Porzi, Alessandro Nottola, Stefano Tirelli, Giovan Battista Preve, Marc Sorel, Antonella Bogoni

    Practical deployment of elastic optical networks requires key enabling technologies supporting the miniaturization of flexible optical transponders for provisioning large-bandwidth services at low-cost per users. A silicon photonics (SiP) reconfigurable optical frequency comb (OFC) demultiplexer based on passive optical filtering exhibiting a minimum spurious tone rejection (STR) of nearly 30dB at 12.5GHz tone spacing is here reported. Low power penalty due to inter-channel crosstalk (IXT) originated by finite STR is observed. Improved filter designs for reduced IXT and/or operation at 6.25GHz comb spacing are experimentally and numerically verified. By monolithic integration with SiP OFC sources and I-Q modulators the scheme has potentials for realizing ultra-compact multiple-flow optical transmitters with adaptive bandwidth and channel spacing.


  • Open Access

    Active On-Chip Dispersion Control Using a Tunable Silicon Bragg Grating

    by Charalambos Klitis, Marc Sorel, Michael J. Strain

    Actively controllable dispersion in on-chip photonic devices is challenging to implement compared with free space optical components where mechanical degrees of freedom can be employed. Here, we present a method by which continuously tunable group delay control is achieved by modulating the refractive index profile of a silicon Bragg grating using thermo-optic effects. A simple thermal heater element is used to create tunable thermal gradients along the grating length, inducing chirped group delay profiles. Both effective blue and red chirp are realised using a single on-chip device over nanometre scale bandwidths. Group delay slopes are continuously tunable over a few ps/nm range from red to blue chirp, compatible with on-chip dispersion compensation for telecommunications picosecond pulse systems.


  • Demonstration of a Multiplane OAM-Wavelength Packet Switch Controlled by a Two-Step Scheduler Implemented in FPGAs

    by Muhammad Nouman Malik, Justine Cris Borromeo, Mirco Scaffardi, Filippo Scotti, Ning Zhang, Charalambos Klitis, Martin Lavery, Gianni Preve, Veronica Toccafondo, Rosula Reyes, et al.

    In order to meet the demand for highly scalable and energy efficient data center switches, multiplane architectures, where multiple optical switching domains are leveraged, are an attractive solution. In this scenario, the orbital angular momentum (OAM) of light can be exploited as an additional domain along with wavelength, space, and time. In this work we report the demonstration of an OAM-wavelength photonic integrated packet switch controlled by an FPGA implementing a two-step scheduler suited for multiplane architectures. Packet-based bit error rate (BER) measurements show transmission at 20 Gb/s with BER $< 10^(-9)$ also for the most critical switch configurations, with penalty < 2 dB with respect to the back-to-back. The measurements demonstrate that the hardware-controlled switch can support up to 32 ports distributed in 4 cards with 8 ports each.


  • Second-harmonic generation in AlGaAs-on-insulator waveguides

    by Stuart May, Michael Kues, Matteo Clerici, Marc Sorel

    Second-harmonic generation is demonstrated in AlGaAs-on-insulator waveguides at telecom wavelengths. Using this material platform, a maximum internal normalized efficiency of 1202±55%  W−1 cm−2 is achieved for a 100 fs pulsed excitation wavelength at 1560 nm. This finding is important towards enabling new chip-scale devices for sensing, metrology, and quantum optics.


  • Intermodal Bragg-Scattering Four Wave Mixing in Silicon Waveguides

    by Cosimo Lacava, Mohamed A. Ettabib, Thalia Dominguez Bucio, Graham Sharp, Ali Z. Khokhar, Yongmin Jung, Marc Sorel, Frederic Y. Gardes, David J. Richardson, Periklis Petropoulos, et al.

    We demonstrate optical wavelength conversion in a multi-mode silicon waveguide using four wave mixing (FWM) Bragg scattering (BS) enabled by a dual-pump CW scheme. The original signal and the generated idler pair excite one spatial mode (first TE mode), while the two pumps excite a different spatial mode (second TE mode) of the same waveguide. Our approach exploits the differences in the group velocities of the various supported spatial modes to ensure phase matching only for the desired nonlinear process. In this proof-of-principle experiment, any unintended idlers are generated with an extintion ration up to 12 dB relative to the phase-matched idlers for a pumps-to-signal-idler-pair wavelength detuning of about 70 nm. The scalability of the scheme to achieve larger and multiple signal wavelength detunings from the pump frequencies is also discussed.


  • Open Access

    Optical gain in 1.3-μm electrically driven dilute nitride VCSOAs

    by Sefer Bora Lisesivdin, Nadir Ali Khan, Simone Mazzucato, Naci Balkan, Michael John Adams, Ville-Markus Korpijärvi, Mircea Guina, Gabor Mezosi, Marc Sorel

    We report the observation of room-temperature optical gain at 1.3 μm in electrically driven dilute nitride vertical cavity semiconductor optical amplifiers. The gain is calculated with respect to injected power for samples with and without a confinement aperture. At lower injected powers, a gain of almost 10 dB is observed in both samples. At injection powers over 5 nW, the gain is observed to decrease. For nearly all investigated power levels, the sample with confinement aperture gives slightly higher gain.