Li Liu
Research Subjects
Li Liu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Jun Liu
Laboratory of Printable Functional Nanomaterials and Printed Electronics, School of Printing and Packaging, Wuhan University, Wuhan, 430072, People's Republic of China
2 shared publications - Qingyong Tian
Laboratory of Printable Functional Nanomaterials and Printed Electronics, School of Printing and Packaging, Wuhan University, Wuhan, 430072, People's Republic of China
2 shared publications - Wei Wu
Laboratory of Printable Functional Materials and Printed Electronics School of Physics and Technology Wuhan University Wuhan P. R. China
2 shared publications Guoyong Ye
Zhengzhou University of Light Industry
1 shared publicationJiaze Li
Zhengzhou University of Light Industry
1 shared publication- Jin Ding
Laboratory of Printable Functional Nanomaterials and Printed Electronics, School of Printing and Packaging, Wuhan University, Wuhan, People’s Republic of China
1 shared publication
Latest Publications
- Open Access
- 1 October 2026
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 36 (10) , 105004
Tip-guided coaxial electrohydrodynamic printing of P3HT nanowire arrays for flexible organic field-effect transistors
High-resolution, ordered printing of polymer semiconductor nanowires is important for flexible organic electronics, yet nanoscale deposition remains challenging because charged electrohydrodynamic (EHD) jets are sensitive to electric-field disturbances. Here, we examine a tip-guided coaxial EHD printing strategy for fabricating ordered poly(3-hexylthiophene-2,5-diyl) (P3HT) nanowire arrays. A grounded tungsten-steel tip electrode beneath the electrically insulating deposition substrate focuses the local electric field near the deposition zone. Compared with otherwise identical coaxial printing without the tip, the tip-guided configuration produced straighter deposition trajectories and more ordered arrays. Among five representative measurements obtained under the optimized condition, the smallest locally observed linewidth was 90 nm and the mean was approximately 200 nm. Flexible organic field-effect transistors based on the printed nanowires exhibited a maximum extracted mobility of 0.04 cm 2 V −1 s −1 and an on/off ratio exceeding 10 4 . This work examines passive collector-side field focusing in nanoscale EHD printing of polymer semiconductors.
- 1 October 2026
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 36 (10) , 105004
Open AccessTip-guided coaxial electrohydrodynamic printing of P3HT nanowire arrays for flexible organic field-effect transistors
High-resolution, ordered printing of polymer semiconductor nanowires is important for flexible organic electronics, yet nanoscale deposition remains challenging because charged electrohydrodynamic (EHD) jets are sensitive to electric-field disturbances. Here, we examine a tip-guided coaxial EHD printing strategy for fabricating ordered poly(3-hexylthiophene-2,5-diyl) (P3HT) nanowire arrays. A grounded tungsten-steel tip electrode beneath the electrically insulating deposition substrate focuses the local electric field near the deposition zone. Compared with otherwise identical coaxial printing without the tip, the tip-guided configuration produced straighter deposition trajectories and more ordered arrays. Among five representative measurements obtained under the optimized condition, the smallest locally observed linewidth was 90 nm and the mean was approximately 200 nm. Flexible organic field-effect transistors based on the printed nanowires exhibited a maximum extracted mobility of 0.04 cm 2 V −1 s −1 and an on/off ratio exceeding 10 4 . This work examines passive collector-side field focusing in nanoscale EHD printing of polymer semiconductors.
- Open Access
- 7 August 2017
- Published by Springer Nature in Discover Nano
- Vol. 12 (1) , 1-12
Facile Synthesis of Silver Nanowires with Different Aspect Ratios and Used as High-Performance Flexible Transparent Electrodes
Silver nanowires (Ag NWs) are the promising materials to fabricate flexible transparent electrodes, aiming to replace indium tin oxide (ITO) in the next generation of flexible electronics. Herein, a feasible polyvinylpyrrolidone (PVP)-mediated polyol synthesis of Ag NWs with different aspect ratios is demonstrated and high-quality Ag NWs transparent electrodes (NTEs) are fabricated without high-temperature thermal sintering. When employing the mixture of PVP with different average molecular weight as the capping agent, the diameters of Ag NWs can be tailored and Ag NWs with different aspect ratios varying from ca. 30 to ca. 1000 are obtained. Using these as-synthesized Ag NWs, the uniform Ag NWs films are fabricated by repeated spin coating. When the aspect ratios exceed 500, the optoelectronic performance of Ag NWs films improve remarkably and match up to those of ITO films. Moreover, an optimal Ag NTEs with low sheet resistance of 11.4 Ω/sq and a high parallel transmittance of 91.6% at 550 nm are achieved when the aspect ratios reach almost 1000. In addition, the sheet resistance of Ag NWs films does not show great variation after 400 cycles of bending test, suggesting an excellent flexibility. The proposed approach to fabricate highly flexible and high-performance Ag NTEs would be useful to the development of flexible devices.
- 7 August 2017
- Published by Springer Nature in Discover Nano
- Vol. 12 (1) , 1-12
Open AccessFacile Synthesis of Silver Nanowires with Different Aspect Ratios and Used as High-Performance Flexible Transparent Electrodes
Silver nanowires (Ag NWs) are the promising materials to fabricate flexible transparent electrodes, aiming to replace indium tin oxide (ITO) in the next generation of flexible electronics. Herein, a feasible polyvinylpyrrolidone (PVP)-mediated polyol synthesis of Ag NWs with different aspect ratios is demonstrated and high-quality Ag NWs transparent electrodes (NTEs) are fabricated without high-temperature thermal sintering. When employing the mixture of PVP with different average molecular weight as the capping agent, the diameters of Ag NWs can be tailored and Ag NWs with different aspect ratios varying from ca. 30 to ca. 1000 are obtained. Using these as-synthesized Ag NWs, the uniform Ag NWs films are fabricated by repeated spin coating. When the aspect ratios exceed 500, the optoelectronic performance of Ag NWs films improve remarkably and match up to those of ITO films. Moreover, an optimal Ag NTEs with low sheet resistance of 11.4 Ω/sq and a high parallel transmittance of 91.6% at 550 nm are achieved when the aspect ratios reach almost 1000. In addition, the sheet resistance of Ag NWs films does not show great variation after 400 cycles of bending test, suggesting an excellent flexibility. The proposed approach to fabricate highly flexible and high-performance Ag NTEs would be useful to the development of flexible devices.
- Open Access
- 20 September 2016
- Published by Springer Nature in Discover Nano
- Vol. 11 (1) , 1-8
Preparing of Highly Conductive Patterns on Flexible Substrates by Screen Printing of Silver Nanoparticles with Different Size Distribution
A facile one-step polyol method is employed to synthesize the Ag nanoparticles (NPs) in large scale. The Ag NPs with different average diameter (from 52 to 120 nm) and particle size distribution are prepared by changing the mass ratio of AgNO3 and PVP. Furthermore, the as-obtained Ag NPs are prepared as conductive inks, which could be screen printed on various flexible substrates and formed as conductive patterns after sintering treatment. During the reaction process, PVP is used as the capping reagent for preventing the agglomeration of Ag NPs, and the influence of the mass ratio of AgNO3 and PVP to the size distribution of Ag NPs is investigated. The results of electronic properties reveal that the conductivity of printed patterns is highly dependent on the size distribution of as-obtained Ag NPs. Among all the samples, the optimal conductivity is obtained when the mass ratio of AgNO3 and PVP is 1:0.4. Subsequently, the sintering time and temperature are further investigated for obtaining the best conductivity; the optimal electrical resistivity value of 3.83 μΩ · cm is achieved at 160 °C for 75 min, which is close to the resistivity value of the bulk silver (1.58 μΩ · cm). Significantly, there are many potential advantages in printed electronics applications because of the as-synthesized Ag NPs with a low sintering temperature and low electrical resistivity.
- 20 September 2016
- Published by Springer Nature in Discover Nano
- Vol. 11 (1) , 1-8
Open AccessPreparing of Highly Conductive Patterns on Flexible Substrates by Screen Printing of Silver Nanoparticles with Different Size Distribution
A facile one-step polyol method is employed to synthesize the Ag nanoparticles (NPs) in large scale. The Ag NPs with different average diameter (from 52 to 120 nm) and particle size distribution are prepared by changing the mass ratio of AgNO3 and PVP. Furthermore, the as-obtained Ag NPs are prepared as conductive inks, which could be screen printed on various flexible substrates and formed as conductive patterns after sintering treatment. During the reaction process, PVP is used as the capping reagent for preventing the agglomeration of Ag NPs, and the influence of the mass ratio of AgNO3 and PVP to the size distribution of Ag NPs is investigated. The results of electronic properties reveal that the conductivity of printed patterns is highly dependent on the size distribution of as-obtained Ag NPs. Among all the samples, the optimal conductivity is obtained when the mass ratio of AgNO3 and PVP is 1:0.4. Subsequently, the sintering time and temperature are further investigated for obtaining the best conductivity; the optimal electrical resistivity value of 3.83 μΩ · cm is achieved at 160 °C for 75 min, which is close to the resistivity value of the bulk silver (1.58 μΩ · cm). Significantly, there are many potential advantages in printed electronics applications because of the as-synthesized Ag NPs with a low sintering temperature and low electrical resistivity.